Real and statistical posting

Hi
The master data of an overhead cost order are used to determine whether the order is real or statistical.
can you please give me the example for the above sentence.
and the path in controlling to find master data of an overhead cost order
Thanks
yaminisri

HI,
This is very simple. Go to KO03 and enter the Internal Order Number and push the master data button. Then select the control tab, you will see the check box for Statistical which shalll get ticked when the overhead order is statistical and it will be greyed out. You cannot change the tick and bring it back to real. This tick is got by default froms the order type where the parameter has been chosen that all orders created under order type shall be statistical one. If you need further info, let me know.
Trust this helps much!
Cheers!

Similar Messages

Real and statistical cost

Hi,
can you pls. tell me what is the real and statistical costs in CO?
Each of their relations to cost center and company code?
how do they fit into CO architercture..
Thanks,
Maya

This is from some old posting
As real posting is concerned it is the actual transaction occurs which post the documents but as in statistical it is not complete posting so u can post it no. of times or no. of posting u can do in statistical posting . but in real posting u can do only one posting.
2. Suppose if u r posting the document for real order then in this case ur cost centre will be statistically posted and data will also statistically posted on profit center.
if data is posted on real cost center then here ur order will be statistical .and prifit center will also be statistical ,
this means that in all cases the data will be statistically posted on profit center either u have real coste center or order.
Assign points if helpful

Real or Statistical Posting....

Hi,
We have an accounting document which contains the 2 Cost object in the line item i.e. Cost Center and Sales document number. So how can i find out that which object contains the real posting and which one as Statistical. Can we find that in Controlling document or do we have any report which shows
Regards,
Shree...

Hi,
see:
Re: Diffrence in GR55 and KSB1
Check the value type of the posting, chcek the SAPNET notes mentioned in the thread.
BR Christian

Real and Statistical Internal Orders

Dear all
Is it possible to create a statistical internal order and specify another internal order for the actual postings as opposed to a Cost Centre?
Thank you for your help.
Thanks
Peter

Sincere apologies. My client only posts to Internal Orders with WBS elements for planning and budget perposes. The client wishes to monitor expenses for particular members of staff who are entitled to financial benefits. In order to benefit from avaiabilty control it was suggested either to create an real internal order for each member of staff or alternatively create a statistical order to do this with costs updated in the operational order. I believe the second option in not possible.
Thank you
PRG

Internal Order Settlements (Real and Statistical)

My client wants to settle the order to the settlement receiver (real posting) and a statistical WBS when the settlement transaction is executed. Can this be done?

I figured it out. Double Click on settlement line, add in stat WBS

Real Posting Vs Statistical Posting

Hi All,
i have got some doubts related to these.
a. Is there any concept behind real and statistical posting?
b. What does it mean to get transaction data from real objects?
c. Are there any rules which can be applied on cost objects to make it real or statistical?
thnx in advance
nikhil

hello nikhil,
As real posting is concerned it is the actual transaction occurs which post the documents but as in statistical it is not complete posting so u can post it no. of times or no. of posting u can do in statistical posting . but in real posting u can do only one posting.
2. Suppose if u r posting the document for real order then in this case ur cost centre will be statistically posted and data will also statistically posted on profit center.
if data is posted on real cost center then here ur order will be statistical .and prifit center will also be statistical ,
this means that in all cases the data will be statistically posted on profit center either u have real coste center or order.
3. yes u can do this in customising tht whether u can make ur cost center real or stastical.
thanks
please reward points

Report Painter with Statistical Posting

Hi,
I am using report painter for P&L reporting. This report is reporting both value type 4 & 11 (actual and statistical posting) value. Some transaction are tied with Internerl order and posted as statistical posting and stop there.
But for some transaction with Real estate key (business entity and property), the transactions are posted to statistical and later will post again to actual posting from RE CO settlement of the property (reduce from property to cost center).
In this case, i have some transaction from statistical (IO related) but some having repeated on both statistical and actual (RE posting and settlement). This caused my report to be double reporting on RE related transactions.
Can anyone tell me how to segregrate this two type of transactions so that my P&L can report correctly.
Thanks.

I didn't understand your question...

Statistical posting to Internal order and Cost center while real to PSG

Dear SAP Gurus,
There is a requirement is to post statistical posting to Cost center and IO while real posting to PA. I tested and found that I can have only either of Cost center or IO as statistical receiver. Is this standard behaviour or some error in set up.
Thanks,

Hi
I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
There would be some ABAP trick pertaining to IS-H which I am not aware of...
I can guide you a bit... During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
a. Either it will get posted or
b. It will get over written before posting....
based on the outcome, you will have to decide your next course of action
Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
Regards
Ajay M

DIFFERENCE BETWEEN REAL ORDER AND STATISTICAL ORDER

Dear gurus,
What is the main Difference between Real Orders and Statistical order?
Thanks in advances.
Babu.

Hello,
Note: Please search the forum before posting a new thread.
The following link may be useful.
Re: Statistical & Real Posting
Regards,
Ravi

Statistical Posting on cost center

Hi,
I use FB70 for revenue posting. My true cost object is Profitability segment wherein I capture Cost center as well as Profit center.
I have two problems with this.
1) In simulation, i am not able to see cost center in any of the view
2) I am not able to see statistical posting in cost center report i.e. S_alr_87013611
I used to see statistical posting in cost center in previous period but now in current period i am not able to see the posting.
IN COPA, these figures are captured correctly i.e. I can see the figures in Cost centers when chossed in nevigation in COPA reports.
Please guide as to how this can be solved?
Regards,
Makrand

Hi Makrand,
the report S_ALR_87013612 only shows 'Real' postings and does not show type 11 (Statistical) in the Standard.
Therefore I assume you have modified the report by adding value type 11 to the column definition. But changes in
standard reports will be overwritten by upgrades or by copy from client 000. So check the column definiton
of the report 1SOP-001 in GRR2.
If you want to carry out changes to standard reports (or standard libraries, and so on) we recommend you create a copy
of the standard report (or standard library, and so on) and carry out the changes only in the copy.
If, for a particular reason, you want to carry out changes to standard libraries or standard variables, and these changes are not to be overwritten by an automatic copy from Client 000, then follow the steps described in note 534389.
Regards,
Greta

Statistical posting object

Hi All,
When there is a posting to cost center and profit center, profit center being statistical.
When there is a posting to cost center and internal order, cost center being statistical.
May I know where can i see in configuration of this setting of which object being statistical when there are 2 object affected in the posting.
Thanks

Hello
When you enter cost center and a real internal order/WBS during posting, the real posting goes to internal order and statistical postings to cost center.
When you enter cost center and a statistical order/WBS during posting, the real posting goes to cost center and the statistical posting goes to internal order/WBS.
There is no configuration. This is standard feature.
Sangram
Edited by: Sangram Choudhury on Jan 25, 2012 1:47 PM

Internal orders - real vs statistical

Hi,
How do we distinguish real vs statistical internal orders, is there a indicator to determine the kind of posting to an internal order.
if anyone can provide some examples it will be helpful ,
thanks in advance.

Icreated an IO , it gives me the below msg when posting a JV , can anyone help me to fix this
"FI: Postings" is not allowed (ORD 400000)
Message no. BS007
Diagnosis
The current status of object 'ORD 400000' prohibits business transaction 'FI: Postings'.
Procedure
To process business transaction 'FI: Postings', you first have to change the status of object 'ORD 400000' to allow the transaction 'FI: Postings'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Transaction analysis

Altering the net value and not posting to Accounting

Dears SD pricing experts.
how can I make a condition type alters the net value of a sales order and not posting it to Pricing procedure (Without ticking the statistical tick mark in Pricing procedure since it is not updating the net value for the sales order).
best regards
Moahmmed

Dear Mohammed
I am unable to understand your comment "not posting it to Pricing procedure". Probably, it should have been "not posting it to Accounting".
If this is what your requirement is, either you can select "Statistical" as you yourself had indicated, or don't assign any account key in pricing procedure, so that the said condition wont hit any G/L account.
Last but not least, it would have been more appropriate had you briefed your requirement / process clearly instead of posting such a question.
thanks
G. Lakshmipathi

Statistical Posting

Hi All,
KSB1 report is picking up statistical posting made to a cost center there by showing the postings made are real but the actual posting is only statistical in nature.
Please advice how this can be corrected? Suitable answers will be highly appreciated. Thanks
Regards,
Vinay

Hi Vinay,
The statistical postings on cost center are characterised by the value type of 11 (in COSP table).
An actual CO posting has value type 04.
Thus in KSB1, change the layout.
Set filter on the value type.
In case you need only the actual values, filter out value type 11.
No other change in KSB1 is reqd.
Hope this answers.
Regards,
Nisha

F-19 Reverse statistical Posting

Hello to everyone
My special G/L " F " (Down Payment Request) has two Reconciliation accounts. Then when i am trying to active the flag " open item Management " pop up it warning:
Open item management is not defined for reconciliation accounts
Why need i change it ?? cos in the transaction f-19 when i am trying to Reverse statistical Posting pop up that:
No due items exist at the key date
It statistical posting is caming from SD... ""the billing plan"" when i do the billing. But after that i try to reverse it statistical posting and it is impossible.
Any help to reverse it??
Many thanx

Hi ,
Try to reverse the Billing document , that has been triggered from Sales and Distribution.
Document posted through integration is not possible to reverse through FI.
Thanks and regards
Praveen.J

Real and statistical posting

Similar Messages

Maybe you are looking for