Real data from 2 infocubes in one planning layout

Hello experts,
Can someone tell me if there is a way to show in one planning layout the real data coming from two InfoCubes.
I think it is not possible but can you confirm me this idea?
Best regards,
João Arvanas.

Hi,
Thanks in advance for your help.
My problem is exactly with the restriction of every column to a single planning area.
I want to include in a column values from 2 planning areas at the same time, because the values complement themselves. The key-figure for both InfoCubes is the same.
If this cant be done the only solution I see is in the extraction to BW transfer the entire data to one InfoCube.
Best regards,
João Arvanas.

Similar Messages

Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

Reading data from 2 infocubes in same start routine - RSDRI_INFOPROV_READ

Hi guys,
Is it possible to read data from 2 Infocubes via RSDRI_INFOPROV_READ FM in same start routine of Infosource.
Both infocube have different KF's.
my one Infocube reading is working fine but now need to another infocube in same strat routine.
Help will be appreciated and full points will be assigned.
Thanks in advance,
Harry

Hi,
1.It means I have to call FM twice
2. Can I use same internal table to store data of both infocubes
3. both cubes have got different KF
Can you please explain in detail?
Thanks,
Harry

Deleting data from an infocube

If I want to delete the data from an infocube before I carry out a load as part of the daily load can I do this and if so how would I do this? Thanks

This might be of some help:
Steps for process Chain
Start
Delete Index ( for Cube )
IP1*.....
Delete Overlapping Requests from InfoCube*
Create Index ( for Cube )
IP1 - Infopackage - Datatargets - Automatic loading of similar or identical requests - Select Deleting Existing Requests - Flag Full or Initial Load - Flag Datasources are same - Selections Are " Same or Comprehensive " - Save .
Delete Overlapping Requests from InfoCube* - In this process type - Object Type - Execute Infopackage - Select the one in use for Full with the Tech name - Click on Deletion Selections at the bottom - Set the same selections as in the Infopackage.

Display Data from multiple models in one table

Hi Experts,
Is it possible to display data from multiple models in one table smltnsly.
I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
Regards
SU

Hi
Your Model Nodes be
Model1
---Output_Model1
Attrib1
Attrib2
Model2
---Output_model2
Attrib1
Attrib2
and the value node is
ValueNode
---Attrib1
---Attrib2
Now the coding.
int size;
IPrivate<ViewName>.IOutput_mode1Node node1 = wdContext.nodeOuptut_Model1();
IPrivate<ViewName>.IValueNodeElement elem;
size = node1.size();
for(int i=0; i<size; i++)
 elem = wdContext.createValueNodeElement();
 elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
 elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
 wdContext.nodeValueNode().addElement( elem );
similar code for Model Node 2
Regards
Abhimanyu L

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to fetch data from different sources into one source (like into Ztable)

hi friends,
As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
My question is how to fetch all data at one place and what are the tables going to be use.
kindly help me out as its very important project.
Thanks
Abhishek

The following is my standard reply to those who need to get old data from a backup in one account and add it to another account. The method described here may be applied to your case. It would be a bit of a long process, though.
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.

How to extract data from BPC InfoCube via ABAP program?

Hi experts!!
I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
Is there any difference between extracting data from BPC and standard InfoCubes?
Thank you all!

Moderator message - Welcome to SCN.
But please do not cross and duplicate post.
Thread locked.
Rob

I need to copy data from a table in one database (db1) to another table in

Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advance

How many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar

Read data from an Infocube

Hi,
I'm writing a program to read data from an infocube, usfin FM RSDPL_CUBE_DATA_READ, but I can't get a result.
This are the parameters I'm using:
I_INFOCUBE                                = 'ZGE_CUB10'
I_REFERENCE_DATE                  = sy-datum
I_S_RFCMODE-ID                        = BIDCLNT100
I_S_RFCMODE-RFC_RECEIVER = RSDPL_CUBE_DATA_READ
I_S_RFCMODE-PACKAGESIZE    = 100
I_S_DELTAMODE-SYSID             = BID
I_S_DELTAMODE-DELTAMODE   =''
I_T_CHA-chanm    = 'ZGE_KPI'
I_T_CHA-chaalias = 'ZGE_KPI'
I_T_CHA-orderby    = 0
I_T_KYF-kyfnm   = 'ZGE_VALOR'
I_T_KYF-kyfalias = 'ZGE_VALOR'
I_T_KYF-aggr      = 'SUM'
i_t_range-chanm       = 'ZGE_KPI'.
i_t_range-sign           = 'I'.
i_t_range-compop     = 'EQ'.
i_t_range-low            = 'FTL_GLC10_0331'.
i_t_range-high          = 'FTL_GLC10_0331'.
E_T_COLUMN-colname   = 'salida_zge_valor'
E_T_COLUMN-iobjname = 'salida_zge_Valor'
E_T_COLUMN-keyflag    = 'X'
but I keep getting DELTAMODE_ERROR.
any help??? any sample-code you may share??
thanks
MAuricio

found some sample code...
http://www.web-dreamer.de/blog/2009/04/reading-on-sap-bi-infocubes-via-rsdri_infoprov_read.html.
SAP also gives you sample programs on how to use the same...
RSDRI_INFOPROV_READ_DEMO
from thread :
Re: RSDRI_INFOPROV_READ and compound selection conditions
Edited by: Arun Varadarajan on Jun 5, 2009 7:24 PM

ODI Error when Loading data from a .csv file to Planning

Hello,
I am trying to load data from a csv file to planning using ODI 10.1.3.6 and I am facing this particular error. I am using staging area as Sunopsis memory engine.
7000 : null : java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
     at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.b(w.java)
     at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Code from Operator:
select     Account     C1_ACCOUNT,
     Parent     C2_PARENT,
     Alias: Default     C12_ALIAS__DEFAULT,
     Data Storage     C3_DATA_STORAGE,
     Two Pass Calculation     C9_TWO_PASS_CALCULATION,
     Account Type     C6_ACCOUNT_TYPE,
     Time Balance     C14_TIME_BALANCE,
     Data Type     C5_DATA_TYPE,
     Variance Reporting     C10_VARIANCE_REPORTING,
     Source Plan Type     C13_SOURCE_PLAN_TYPE,
     Plan Type (FinStmt)     C7_PLAN_TYPE__FINSTMT_,
     Aggregation (FinStmt)     C8_AGGREGATION__FINSTMT_,
     Plan Type (WFP)     C15_PLAN_TYPE__WFP_,
     Aggregation (WFP)     C4_AGGREGATION__WFP_,
     Formula     C11_FORMULA
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=Account.csvSNP$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csvSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=2CSNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=AccountSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ParentSNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Alias: DefaultSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data StorageSNP$CRTYPE_NAME=STRINGSNP$CRORDER=4SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Two Pass CalculationSNP$CRTYPE_NAME=STRINGSNP$CRORDER=5SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Account TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=6SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Time BalanceSNP$CRTYPE_NAME=STRINGSNP$CRORDER=7SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=8SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Variance ReportingSNP$CRTYPE_NAME=STRINGSNP$CRORDER=9SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Source Plan TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=10SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=11SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=12SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=13SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=14SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FormulaSNP$CRTYPE_NAME=STRINGSNP$CRORDER=15SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CR$$SNPS_END_KEY*/
insert into "C$_0Account"
     C1_ACCOUNT,
     C2_PARENT,
     C12_ALIAS__DEFAULT,
     C3_DATA_STORAGE,
     C9_TWO_PASS_CALCULATION,
     C6_ACCOUNT_TYPE,
     C14_TIME_BALANCE,
     C5_DATA_TYPE,
     C10_VARIANCE_REPORTING,
     C13_SOURCE_PLAN_TYPE,
     C7_PLAN_TYPE__FINSTMT_,
     C8_AGGREGATION__FINSTMT_,
     C15_PLAN_TYPE__WFP_,
     C4_AGGREGATION__WFP_,
     C11_FORMULA
values
     :C1_ACCOUNT,
     :C2_PARENT,
     :C12_ALIAS__DEFAULT,
     :C3_DATA_STORAGE,
     :C9_TWO_PASS_CALCULATION,
     :C6_ACCOUNT_TYPE,
     :C14_TIME_BALANCE,
     :C5_DATA_TYPE,
     :C10_VARIANCE_REPORTING,
     :C13_SOURCE_PLAN_TYPE,
     :C7_PLAN_TYPE__FINSTMT_,
     :C8_AGGREGATION__FINSTMT_,
     :C15_PLAN_TYPE__WFP_,
     :C4_AGGREGATION__WFP_,
     :C11_FORMULA
Thanks in advance!

Right-clicking "data" on the model tab can you see the data?
In your code there's written:
P$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csv
Is it right the double slash before the file name?

Reading data from an infocube into wd application

Hi,
How can we read data from an infocube.I have to read data from two infocubes and then display it in table in an wd application.
I have found an FM RSDRI_INFOPROV_READ to read , but how to use the same in wd application.

Hi Sanjeev,
Use CALL FUNCTION To use FM in WD.
something like this..
Declarations for BAPI_HU_DELETE_FROM_DEL
DATA : Del     TYPE BAPIDELICIOUSDELIVERY-DELIVERY_NUMBER,
         Return1 TYPE TABLE OF BAPIRET2.
del = lv_imp_outdel.
DATA : HUKEY    TYPE BAPIHUKEY-HU_EXID,
         wa_hukey TYPE BAPIHUKEY-HU_EXID.
loop at lt_pack_mat into ls_pack_mat.
wa_hukey = ls_pack_mat-HANDLING_UNIT.
MOVE wa_hukey TO hukey.
endloop.
Calling BAPI_HU_DELETE_FROM_DEL
CALL FUNCTION 'BAPI_HU_DELETE_FROM_DEL'
    EXPORTING
      DELIVERY = del
      HUKEY    = HUKEY
    TABLES
      RETURN   = Return1.
Commit Work
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
Chers,
Kris.

Error deleting data from an InfoCube

hi, all,
i try to delete all data from an InfoCube. All the /BIC/D* tables was deleted and recreated, but the /BIC/F*-Table cann not be deleted - Error-Message:
"Database table /BIC/FZPCA_C01 could not be deleted or recreated
Message no. R7861"
The SAP-Note 745742 doesn't help - tere is SP-Level 13.
Any Idea?

I got the same error meassage when I tried to delete data in my infocube.
1. I typed TC:SE14
2. Entered the name of the infocube fact table.
3. Checked the delete data radiobutton and clicked the 'Activate and adjust database' .
And the data in the fact table was deleted
So thanks guys

Quetsion about loading data from transactional infocube

Hi,
We have 4 transaction infocubes where the users data will be saved from their layouts and we have one more transaction infocube(A) where all these 4 transactionl data will saved to onecube say(A)
We also load from A- to other basic cube(B).
My questions are when
1.I load from All these 4 trnsactional cube to A - Do I need to say transactional can be planned not loading allowed.
2.When I load from A to b(basic cuvbe do I need to say - Planning cannot be allowed only laoding)
Let me know
Thanks

If you want to load data from planning cubes to further data target using update rules or transformation, their requests need to be green (yellow request would not load further). In this case the target transactional cube should be in loading mode. If you do not want to do these things, you can look at using a copy planning function (but remember that planning function takes more time than BW loading - this difference would be really noticeable if the data volume is large).
There are many threads on this topic - if you search, you can get more info.

Error reading data from an infocube

Hello,
I want to read data from a remote infocube in tcode listcube, and I get this 2 error messages: "Error reading the data of InfoProvider IC_SNP_DR" and "Error when generating program". This is a remote cube reading data from a SNP Planning Area.
I´ve already activated Plng Object Strucuture 9ASNPBAS and repair all infoobject but in tcode /SAPAPO/MSDP_ADMIN in 9ASNPBAS I get message "Not All InfoObjects Can Be Read". Is this why I get the error in reading the infocube?
Does anyone know why I get this errors and how to solve them?
Thanks and Regards,
Teresa Lopes

Teresa
From /SAPAPO/MSDP_ADMIN go to extras/data extraction tools. This gives you all the things you need to manage the extractors on the snp planning areas. you can use RSA3 to test the extractor and pull data to a list. Are you sure you want to extract using the total POS (9SNPBAS). Based on the data you need you might want to extract based on one of the standard SNP aggregates. MALO (material location) for example.
You mention that the POS was active. Make sure you Planning area is also initialized
George

Real data from 2 infocubes in one planning layout

Similar Messages

Maybe you are looking for