REAL hard drive space on early mac pros??

REAL hard drive space on early mac pros??
I own one of the first generation Mac Pros 2.66ghz quad, 2006.
I've read that you can use up to 2TB or 3TB of hard drive space inside the machine. I suspect this is understated. So what else is new?
I currently have 3 x 500 gb drives and 1 x 2TB drive in my machine.
I'd actually like to put in 3 more 2TB drives. Has anyone done this?
Any thoughts?

No, not really.
A 3TB HD can be troublesome for BootCamp use, since the Windows partition is put in the area above 2TB and the Master Boot Record (MBR) Windows still uses has trouble / is incompatible with adressing harddisk space above 2.2TB.
With some RAID setup and IIRC the Apple Raid 3TB harddisks are shown and using also only 2.2TB.
So, in essence if you stay away from BootCamp Windows and RAID 4 x 3TB also work fine in your MP.
And I had 2TB HDs in my own 2006 MP before I sold it and got me a 2010 MP.
Stefan

Similar Messages

  • Can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

    The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have.  The diagnosis will be free.  Any extensive repairs will not be free.
    If you have minor software problems, you essentially will have to deal with them yourself.  Examine these two comprehensive documents for possible problem definition and solutions.  If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
    https://discussions.apple.com/docs/DOC-3521
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

    How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

    Mac Pro tower can support drives up to 4TB is size.
    If running 10.8.4, 10.8.5 or 10.9.0, there is a bug in Disk Utility that precludes proper erasing of drives over 2.2TB as Internal drives

  • I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    Just format it with Disk Utility as mentioned above.  Select the new disk on the list at the left.  Click the erase tab.  Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice.  Then click the erase button.
    That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase.  You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition.  Give each a name as before and again Mac OS Extended (Journaled).  Click Apply button to create the partitions.
    Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them.  So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose.  You can always go back and erase it back to a single partition.

  • What is using my hard drive space on my macbook pro

    Something is using all my hard drive space and I cannot figure out what.  Yesterday I had 120GB and now I have 120MB free and got a disk warning.  I have noticed this past week that my space has been eaten up.  My Mac Book Pro is 2 months old and I have not put any big or fancy programmes on it as I am still getting used to this being my first Mac.  One of the selling points for getting a Mac is I heard its programmes took a lot less space.  My previous PC that I had for 2 years had a 130GB hard drive and I had 20GB free when I gave it away.  I cannot believe I have used all my 500GB hard drive space when I have only installed a few programmes on this one such as Notebook, Pages, and some accounting software.  I cannot seem to find details of where the space is being used.  Please help.

    Mr_Joe wrote:
      My Mac Book Pro is 2 months old  
    I cannot seem to find details of where the space is being used.  Please help.
    Empty the trash!
    Where  did  my  Disk  Space  go? 
    Slimming your hard drive
    Seven ways to free up drive space
    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.
    FreeSpace cost $.99 -  FreeSpace shows you how much space is available on all local, connected, and network drives with a single click.
    You are still under warranty plus you still have 90 days of free phone tech support.  Take advantage of it before it runs out!

  • Seagate Backup Plus Slim External USB 3 Hard Drive Not Working with Mac Pro

    Hi, I have just purchased a brand new Mac Pro.  I have three 2 TB Seagate Backup Plus Slim External USB 3 hard drives that just don't jive with the new Mac Pro's.  When the drive is connected, I cannot access the drive, read/write or even format.  Finder completely locks up and the drive cannot even be force ejected. When I try to format, Disk Utility either spits out an error that the drive cannot be read, or simply locks up.  This happens regardless of the OS on the Mac Pro.  I am currently running 10.10.2
    I have ruled out an issues with the drives, as I have tested all of them on a variety of systems and OS's, including Power Mac, Mac Book Pro, PC, OS 10.7, 10.8, 10.9 as well as on Windows.  I have tried formatting in every file system including Mac OS Extended, Mac OS Extended (Journaled), NTFS and exFAT.  ALL other systems have no issues with the drives. Apple has replaced my Mac Pro with a brand new one and the drives still behave the same way.  Furthermore, I have tested the drives on three other Mac Pro's at work and they all reject the drives. So, on their own, there is nothing wrong with the Mac Pro, or the drives. However, the configuration of them together is wreaking havoc.
    I have contacted Seagate, and this was their response:
    The most recent version of the Backup Plus drives use the USB Attached SCSI (UAS) standard to increase transfer rates.  It's possible that the drivers being used currently on your Mac Pro are having issues using this feature with the standard USB 3.0 drivers installed.  I would recommend contacting Apple to check for any driver updates or see if they any suggestions for issues involving drives using UAS.
    I have also started a case with Apple Support (Case # 755934373) and am waiting to hear back regarding Seagate's response.  I've spent DAYS trying to troubleshoot this and am now at a complete loss.  If anyone has any ideas, I'm all ears (or eyes in this case).
    Thanks!

    Hi danielsh6,
    I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
    Thunderbolt Firmware Update v1.0
    Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
    Hope this helped!
    Forest

  • How do I get more hard drive space for my Macbook Pro?

    I am losing hard drive space and I don't know why? Is something writing or copying on my Macbook Pro?
      Thank you...

      The Hatter..This may be helpful information. I go to force suit and there is both Safari and "Safari web content not responding in red" and this may
    be the problem. I delete files and I get up to 50 to 50 MB and then it goes right back down to zero with no use on my part. I made a mistake by
    viewing **** on a CHatterbate site and I think that this may be the problem. How do I get rid of this virus, if that is what is happening> I ran Clam X and
    it did not find anything...Thank you, again.

  • How can I increase hard drive space on my mac book pro

    I have only about 30 gb left on my hard drive. I have a mac book pro I bought in 2013. I've deleted or transferred to an external hard drive
    as much material as possible. How can I find out what is taking up all the room?? My dropbox always says it can't sync because I don't have
    enough room on my hard drive. Why isn't 30gb enough? Please tell me how I can find out which files are taking up so much room and how I can
    find out what I can get rid of (are there programs I don't know about?) thanks
    Isabella

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Get an external hard drive on which to store some of your files after which you can
          erase the data from your internal drive to free up space.
      5. Also see Freeing space on your Mac OS X startup disk.
      6. See Where did my Disk Space go?.
      7. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Hard drive for G4 now, Mac Pro later

    I have an early G4 400 MHz (AGP graphics). I want to install an ATA drive in Position 3. In about a year I will buy a MacPro tower and want to move that hard drive from the G4 to the Mac Pro. So I am looking for a hard drive that will fit both computers. I would like to buy a 7200 rpm 500 GB drive, but am confused about the specs (ATA, SATA, PATA).
    (1) Can anyone advise what specs I should be looking for to fit the G4 now and to work optimally in the Mac Pro in the future?
    (2) If I buy a 500 GB drive, will my early G4 only be able to read/write 128 GB? I believe this is a limitation of my early G4, but 128 GB is OK for now if I can use the full 500 GB in the future Mac Pro.

    you current computer uses Parallel ATA all Mac Pros use Serial ATA
    In the common use of terms: ATA = PATA = IDE
    SATA is usually set aside as its own term
    The two technologies use different interfaces that are not compatible.
    Without the use and purchase of a PCI card for one of the machines you will not be able to use the same drive internally in both machines. That will run you about ~$60 for either a PCI PATA card for the MacPro or a PCI SATA card for the AGP powermac.
    The plus side for the PCI SATA card for the AGP powermac is that you will be able to use all 500Gb of drive space.
    Another alternative is to buy a PATA hard drive now to use inside of your AGP tower and then later buy a $40 firewire enclosure to put the drive inside of so that a MacPro can use it as an external drive.
    Yes, your current computer will only see 128Gb of a PATA drive.

  • Will a SATA III Hard Drive work on a Mac Pro 2,1 (2008)

    Will a SATA III work on a Mac Pro 2,1 (I think 2008)?
    http://www.amazon.com/gp/product/B004CSIG1G/ref=wms_ohs_product?ie=UTF8&psc=1
    If not the above, then what?

    Apple Pro RAID card is not compatible with 3TB drives and never will be it now seems. It also lacks any real performance and is destined where RAID 5 is a must.
    SSDs are a more interesting matter in choice and support... but not traditional platter type drives.
    I use SSD for system now 100% on multiple systems, 10K WD VR ($200 for 1TB / 180MB/sec and variety of WD blacks and Green.
    2008 has some interesting stuff, PCIe mix and support and booting, but more choices in GPU. Runs best with all 8 DIMM slots filled. Was the first to have UEFI to support 64-bit kernel but does not support industry standard enough to support Windows 8 UEFI.
    Storage market would be a total mess like it was back in 2004 when SATA 1.0 moved to 2.0 and lots of problems. SATA 1.0 in early G5 was just PATA with an SATA interface chip slapped on and not "native" SATA. THAT is where the "will the IBM Hitachi or Seagate or Maxtor" really did require research. Not with Mac Pro line 2006 and on.

  • Hard Drive Carrier old & new Mac Pro

    hi!
    i'm asking me if the hd carriers from the "old" mac pro fits in the early 08 one's?
    thx alot

    Be aware the Transintl sleds do not come with anti-vibration grommets which are a standard component of the Apple sleds. - When I received my sleds from Transintl I thought the grommets were omitted by mistake and sent an email stating such. Here is Transintl's response:
    "No we are not shipping Pro Sleds with any spacers. In my opinion
    these rubber spacers are not needed just because of the fact that no
    other computer manufacture uses such grommets including Apple
    in there machines to mount hard disk drives including previous
    models of Mc Pro."
    Message was edited by: chainsaw

  • Need advice, one hard drive, or two, inside Mac Pro

    I have several Mac Pro towers, (not the Mac Pro cylinder).
    My practice going back for many years is to store everything on my primary (boot) drive in Bay 1.   I then will use hard drives in some or all of Bays, 2-4 for backup purposes.   The idea being that I would have a backup of everything on one drive.
    I saw a training video the other day where the instructor said that only the OS and your other programs should go on the boot drive.   He said that your data should go on a 2nd drive in Bays 2-4. 
    I do see some logic in having your data on a separate drive.  However, doesn't that double the backup requirements ?   I like to back up my programs because with the trend of software being downloaded it is usually not possible to purchase older versions of software so I keep them myself.
    I appreciate suggestions.

    Can it be that no one here runs Photoshop and/or other Adobe applications ? 
    < kind of a rant > The advice from that "instructor"/DESTRUCTOR described in the OP is totally wrong for someone like me who has been using Photoshop very intensively in excess of 60 hours per week, as well as Adobe Illustrator, InDesign and Acrobat Pro for over 10 years.
    For one thing, Adobe applications really, REALLY want to reside on your boot volume, where your OS resides.  Adobe updaters and installers also look for your Applications folder on your root level or they just won't find them.
    Then you really need a physically separate, dedicated hard drive for Photoshop's scratch. The scratch exceeds 250 GB at times when stitching large panoramas, and in one rare occasion I saw it exceed 800 GB.
    Nothing affects speed more than insufficient RAM, and insufficient available contiguous scratch space.
    To have your backups in an an internal drive won't do you any good if your motherboard or your CPU fails. A bootable, external backup volume you can boot a second machine with is essential, in my experience.
    I wouldn't presume to be in a position to advise anyone else, but for me the advice doled out in this thread is way off what I need or what I would heed.
    I tend to immediately put on the brakes as soon as I read someone asking "what's the best way…[to do anything]" as that usually translates to "I'm a clueless rank beginner and I have no clue as to how this program works". < /rant >
    Personally, I stay away from that kind of question at the Adobe forums, and I know quite a few really experienced users who do the same.
    Anyway, my apologies for interrupting.  Please carry on.

  • Not Enough Hard Drive Space on my Mac Mini to Save Deleted User Account Folder: What to do?

    I am no longer able to access my original user account on my mac mini because the account is corrupted and won't load. Thanks to the helpful advice I found on the internet, I was able to create a new user account and resume using my mac, but all of my old files are trapped in the old user account.
    The plan was to delete the old user account, create a disk image of the old account folders, and then migrate those folders to the new user account. Unfortunately, I don't have enough disc space left on my Mac to do that. I have just under 11gb left after deleting absolutely everything I could, and I need 81gb for the old user files. The back up plan was to select the "don't change the home folder" option, but when I went to delete the account, there was no such option. The message simply read:
    "The user's home folder will not be saved. To do so, you need 81.1gb of free disk space. Try emptying the trash or deleting other files on your disk, then deleting the user account. If you do not want to save the user's home folder, click delete immediately."
    My only two choices were CANCEL or DELETE IMMEDIATELY. There was no "don't change the home folder" option.
    So I am not sure how to proceed. Here are some questions:
    1) is there a way to save the disk image directly to an external drive instead of the user's folder on the mac hard drive?
    2) If I use the "delete immediately" option, will the files go into a "deleted users" folder where they can be recovered or will they just be erased from the computer and unretrievable?
    3) Is there a way to use terminal to change access permission on the original user account files so that I can copy them onto an external drive or integrate them with the new user account without having to first delete the original user account?
    4) In the absence of deleting the user account, will using either:
    sudo chown -R `id -un` /Users/oldusername
    and/or
    sudo chmod -R u+rw /Users/oldusername
    in Terminal allow the new user account permission to access the original user files and merge them seamlessly into my new user account? Or must I delete the original account first?
    5) Is there something else I haven't thought of that would work, would be more efficient, or more effective? This wouldn't be the first time I have overthought a solution...
    When considering any solutions, please keep in mind that I cannot launch the original user account as that starts the whole endless loading loop. So, while I have the password for the original user account, any solution would appear to require that I work from the new user account only, without launching the old account.  Also I am a complete newbie at this. I've used Macs exclusively for 17 years but this is the first time I've had to do anything like this. Up to now, everything has always "just worked".  So please be as detailed with any instructions as possible!
    Any help greatly appreciated.  Thanks!
    Mac Mini 2ghz 1g ram running OS 10.4.11

    I think ComputerFixer is correct, you should be able to drag and drop it to another drive, no worries. However, if not, you could create an disk image of it using DiskUtility and create it on a new drive. But again, I don't think that is necessary. If you have administrator rights with your new account, can you simply go into the old user account folder and drag and drop the files you want to save? I have done that as well as copy the older user account to another drive (in my case, another computer on the network) and salgage my files from there. Is that an option for you?

  • Will this hard drive work with my Mac Pro?

    Just looking for confirmation that this hard drive will work with my Mac Pro:
    http://www.aria.co.uk/Products/Components/HardDrives/SATA+%28Serial+ATA%29/500GB+to+1TB/Samsung+HD103SJ+SpinPoint+F3+1TB+SATA- II+3.5%22+Hard+Drive?productId=37726&page=4&rqcType=q
    Thanks

    Hi Fred,
    usually any 3.5" form-factor SATA-connected harddisk works in a Mac Pro.
    So I don't see any reason for this harddisk not to work.
    Regards
    Stefan

  • Trouble removing hard drive for upgrade in Mac Pro

    I have a 2008 Mac Pro and have read how to install new drives. The problem I am having is getting one of the drive bays, drive bay 1, to release. It seems like I can remove the other drive bays OK, but that one is stuck but good. After looking inside, do you think it may be blocked somehow with the part that stands up vertically inside the case next to drive bay 1? I was wondering if anyone else had issues with this bay or the cages release? The others seem to slide out OK.
    Thanks for any thoughts on this.

    That's a good tip actually
    In most cases, I can get the HD trays out of the Mac Pro without any problem. However, sometimes tray 1 (which sits on top of the fan) can be very snug. Using fingers on the rear of the HD along with the other hand pulling from the front tab is the best way I have found to remove the tray without placing too much tension on the front of the tray.
    The Mac Pro front tray lip can only accept so much pull pressure before the lip starts to bend which actually makes the tray even harder to remove. Using a few fingers on the rear of the HD provides a more balanced force for removing the HD.
    Have fun!

Maybe you are looking for

  • I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng

    Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it

  • Business area not updating automatically.

    Hi Gurus,     Business area is not getting updated when a transaction is posted thru PO/SD process. BA is getting updated only for line items i.e. FI-MM(GL maintained in OBYC) and FI-SD(GL maintained in VKOA) but the same is not happening for line it

  • Acrobat file hangs up even when just browsing in explorer

    I created a concatenated file from a collection of smaller pdfs using acrobat (vers 8, Vista) about 21 MB. However, even trying to change its name or look at its properties in windows explorer causes the window to hang with the spinning blue circle.

  • Is there a way to recover a deleted calendar without deleting the rest?

    Is there a way to recover a deleted calendar without deleting the rest?

  • Mfc210c printer issues

    Thanx Snowman for reminding me to start new thread. anyway, since the latest kernel upgrade, my printer stopped. the scanner part of it works but I can't get it to print. I get this error using KDE printer set up: getting this error now: A print erro