Real Instruments recording out of Sync

Hi all,
I'm having an issue while recording an acoustic guitar through the built in mic. When I record a second guitar track over the first and play it back, there's a lag on the second track. This would happen to me while using Cubase too, I just don't know how to fix it on my new Mac
I know I could just move the second track to sync it up, but if there's any preventative, or automatic measures I can take, that would be better.
Thanks

The lag is called "Latency", an unfortunate fact in Digital recording, however there are things you can do to minimize the problem.
Start by opening GB's help and search for "optimize"
<hr width="250" align="left">
HangTime [Will Compute for Food] B-)>
♪♫ The Bullets and Bones Band ♫♪
Disclaimer<hr width="250" align="left">

Similar Messages

Real instruments - recording/input levels

...when i am recording real instruments, the input level and recording level are inaccessible.
i click on them with the mouse, but nothing happens.
are they preset? non-adjustable?
i can adjust the playback volume, of course, as well as other parameters like pan, monitor on/off, mute, solo, and add compression, echo, reverb and so on.
thanks in advance!
david henman
bolton
ontario

david henman wrote:
...when i am recording real instruments, the input level and recording level are inaccessible.
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Need help with Garage Band 11 and my TASCAM interface recording Real Instrument

I am using a TASCAM US-122 interface with garage band 11 on a mac at 32 bit running osx 10.6.6. Garage Band preferences / audio input and output set to TASCAM (which means it recognizes it) , but when using Real Instrument for the TASCAM and the track is armed , etc... the record function works when started except "no sound" from the device I am running thru TASCAM is being detected.
I am getting sound out of the TASCAM and simply running an AKAI mpc beat as a test. I am sure there is something simple I have yet to do but not sure what it is in Garage Band.
Can you help ? Thanks. GARY

with the real instrument track selected...
make sure the info pane is showing on the right (click the little "i" on the bottom right to open it; "Real Instrument" should be highlighted in blue on top).
On the bottom of the info pane it says "Input Source" and "Monitor."
Make sure the Input Source is set to the Tascam channel you're using (the channel, mono or stereo, that you've plugged your MPC into).
And if you want to hear it as you record, make sure the Monitor is set to ON.

CANNOT RECORD REAL INSTRUMENT ON TO TRACK

I need help with a sound recording issue. I have a Macbook, an M-box2 with Protools and Garage Band software. Recently i have had a challenge trying to figure out what went wrong and where. I've used my setup many times before but, all of a sudden, I am unable to record a live sound or instrument, through all inputs on the m-box2. when i attempt to record a live instrument or sound... i get that sound through the monitors BUT, no sound is recorded on the track being used... however... I do have a signal on my levels indicator that is 3/4 of the way to the peak point... but, they don't move at all. There is also a visual recorded consistently monotone looking waveform that appears to be some sort of sound or signal, but is not audible and it does not fluctuate as a normal sound does. *PLEASE HELP ME!!!*

I have the same problem, I think. In my case, if I select "Real Instrument" when I open a new track, the Track Info box on the right has only Software Instruments available. In other words, I don't see a "Real Instruments" button next to the "Master Track" button, only Software Instruments. Further, I cannot get it to record anything from the audio line-in. I know the mic/line-in is working, but it's not registering in GarageBand (regardless of which input is selected in GB preferences). Another quirk: if I delete the Inst1 track that it starts with, then I cannot even click onto the Software Instruments to select one.

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

Can I get Notation when recording from a "Real Instrument"?

Hi all,
I am plugging my Triton TR keyboard to my interface.
When in GB, I can record as a "software", and I can get the notation because I am using the soundbank of GB.
I would like to use the soundbank from my Triton TR, so I use 'Real' instrument, but at the bottom of the screen where it shows the details of what Im recording, I can only see waves, not the notation.
Can I see the notation that I am playing from the 'real' instrument?? Because I know that its receiving the information of 'what' I am playing because my midi is connected as well.
Can anyone help?
thanks a million

You can record midi and audio in parallel, so you can see the notes of what you played. But changes in the recorded midi track won't affect the audio, since you don't send midi out to trigger your keyboard's sounds.

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Video + audio recorded in Quicktime X is out of sync when used in iMovie

I have recorded video in Quicktime X. When I try to edit it in iMovie, the audio and video are out of sync. They are in sync if I play the video in Quicktime. I am using the latest version of iMovie '11. Anyone know how I can fix this?

You should not HAVE TO but did you try extracting out the audio? This has been a issue for a long time. I am not sure why you never see this problem in Final Cut but it rears its ugly head in iMovie all the time. What do the call it now? Oh yes... detach. Select the clip then Clip -> Detach audio and line it back up.
-- Dan
Keeper of TheUnofficialiMovieFAQ.com

N95 Recorded Video: Video and audio is out of sync

Audio and video is out of sync when I play videos recorded with N95 on my PC. If have used different PC applications to play the video, but all exhibit the same problem.
In the beginning of at video it seems that the audio is about 400milliseconds ahead of the video - you hear the sound first. The different in audio and video is not constant. In a long video (30-50minutes) it is quite unpretictable how video and audio is out of sync in the end.
To experience the problem yourself record a long video sequence with a N95.
1 .Record something where it is easy to see if video and audio is in sync.
2. Transfer the recording to a PC.
3. Play the recording using VLC (www.videolan.org)
Another way to experience the problem is to convert the recording to AVI format at play it in MediaPlayer or WindowsMovieMaker. To convert a N95 video recording to AVI format use Mp4Cam2Avi.
http://sourceforge.net/projects/mp4cam2avi/
The video recording settings I use on my N95 are:
Best Quality
No Video Stablisation
Firmware version 21.0.0.16.
I think the video quality of N95 recordings is quite good, so I would really like to be able to view and edit the recorded vidoes on my PC.

28-Mar-2008 09:50 PM
el_loco wrote:
I've seen this issue, but it's not so critical for me. It doesn't happen 100% of the time or in most situations it's very hard to see.
You can edit videos on your PC, just converting them to AVI then using any Video Editor on the PC.
Yes while editing separate the audio channel from the clip and reinsert at the begining of the clip. This will minimise sync issues.To get accurate sync increase the timeline so that you are able to the see audio squiggles as a waveform.
If my post has helped you please click the white star on the right

Video recorded directly into iMovie 11 is out of sync

I opened iMovie 11 on my brand new Lion MacBook Pro and recorded a video directly into the built in camera. As the video was recording I could see it starting to delay the video and image. As the video went on it continued to get further and further out of sync. Replaying the clips in iMovie showed that the out of sync issue was still present. But if I play the recorded clips through QuickTime the clips are in sync.
I continued to edit the piece hoping that it was just a preview issue. But after optimizing clips and exporting to Quicktime the out of sync issue is still there.
In summary - the raw clips are in sync in QuickTime. Anything viewed or output from iMovie 11 is out of sync.
I've been reading through the forums and tried some suggestions such as detaching the audio. This does not work. I "Optimized the Clip" (which was a direction in official Apple Support) and this did nothing.
Any help would be appreciated.

Exactly the same here. It starts fine for about a minute and a half, but then it slips and gets progressively worse.
It's making me really mad too, because I can no longer just turn on iSight and record. I have all the latest updates, in fact I just did the main system update today as well.

Audio sync problems with greenscreen I have replaced the camera audio with my zoom recorder audio and it is in sync. When I apply greenscreen the audio goes out of sync. What am i doing wrong?? So frustrating..Thanks, Peter

I have replaced the DSLR audio with audio from my Marantz recorder and it is in sync with the dialogue. I apply green screen and the audio goes out of sync. Cannot seem to make it work. what am I doing wrong? Thanks, Peter

Thanks for the reply. I don't have time for this. is it time to switch to a different editor?

Voice recorded on Gb and video on DSLR out of sync.

I recorded a cooking demo on video and captured the voice on GB and the image on a Nikon HD Dslr 300s at 25 fps. ( video setting to PAL ) When I brought them into FCPX to edit the audio and visual are out of sync ie. after about 30 sec the audio is about a sec later than the image.

This happen sometimes because either the camera and mac are running at different clock cycles or problem when importing or exporting of the media . The only thing you can do about it now is adjust the speed of the audio or video. You can do a bunch of math to figure it out of trial and error with speed adjustment. Also short clips will be less of a problem so you may want to split clips up some.

Importing a recorded Skype call into Premiere Pro & audio goes out of sync. PLEASE help!

Every time I try and import a clip it gets out of sync, but if I open the file in quicktime its perfect???

(Not sure why this response was originally rejected by the moderators, but am trying again.)
A solution that worked for us:
[EDIT] I do NOT work for any of the companies included in this solution, nor do I receive any kind of renumeration from them. I am recording the software and steps we used to overcome the problem of the original poster.[END EDIT]
The Skype Call Recorder (Ecamm) has 4 built-in converter/splitter apps (you have to look in the "Movie Files" folder to find them). We used the apps to split the recorded Skype video calls into 2 separate "conversations" and then used a free online converter (http://www.online-convert.com/) to convert the conversations into MP4s. Once the MP4s were imported into Adobe Premiere the audio lined up perfectly with the video.
Hope this helps somebody.
(Note to moderators: a message containing the "why" a reply was rejected would be helpful when members are trying to edit.)

Garageband skipping "record real instrument" section

Hey everybody,
I'm having a little problem that is driving me insane!! When I open garageband, I want to record a real instrument, but when I go to the create new playlist section, it goes straight to the saving options menu. It didn't do this before and I barely used it. I want it back the way it was!!!!
Please, can someone help me get to the record real instrument menu??

When I open garageband, I want to record a real instrument, but when I go to the create new playlist section, it goes straight to the saving options menu.
I assume you are talking about the "Create new music project" button - and when you click this, GB asks you to name the project and save it somewhere. It has always done this, GB doesn't allow for working with unsaved "Untitled" documents (which is sometimes a pain, like when you want to just check some feature to answer a forum question).

"Too Many Real Instruments"

I am posting this in the '09 topic, but my question really dates back to Garageband '08. I rely on Garageband often, and I'm a big fan of it. However, it contains a serious problem which I need fixed.
I create a new project, drop a single iTunes song into it, and begin to edit. Almost every time, randomly while playing the song the "Part of the project was not played. This project has too many real instrument tracks to be played in real-time" warning message appears. I only have 1 track! Worse still, my audio driver lets out a terrible "HONK" which startles me and blasts through the entire house. After that, My sound output faintly exists until I open up Audio MIDI Setup and change a random setting on my output.
I am quite tired of this predicament. Is there anyway to fix this (without money)?

I was experiencing a similar problem, and I just got off the phone with applecare and went through all their steps.
I'll try my best to recount them here. But before I do, let it be said that the tech fellow, once he heard what I was doing, exclaimed that my core problem was that I needed to be creating new projects, and not re-using the same project (ex. "My Song 2") over and over.
What I've been doing is backing up a pile of mini-discs that have live concerts on them. A couple of hours of audio each one, and I've been recording them into Garageband. After I divide the concert up into songs and export them to itunes, I've been deleting the track in Garageband and then importing the next concert (repeat x 10 concerts).
About 7-8 concerts in I started getting that popping sound when the sound would cut out (made the sound of depressing the safety-seal bubble on the metal lid of a jam jar). At first, quitting Garageband and opening it again would work. On the 10th concert, when the sound cut out the sound for the whole computer would stop working (itunes, volume buttons on my keyboard, everything).
So the tech fellow said the lesson is this: create new projects. Don't be shy about it. No need to re-use and recycle in cyberspace.
Now - my applecare steps:
- First we went: Macintosh HD, Library, then dragged "Caches" to the trash
- then went to Finder, Go, Utilities, Disk Utility, Macintosh HD, Repair Disk Permissions (that took some time)
- then restarted the computer
All seems to be well now.
Good luck

Real Instruments recording out of Sync

Similar Messages

Maybe you are looking for