Real poor output quality (likely a noob question)

Hi All,
I just bought premier cs 5. I have made some HD videos 720x480 with my galaxy s camera. They look great once dragged into cs5 using the New Item method. But once I have exported the video file to say mpeg4, it looks washed out all pixelated and just like my old cannon camcorder. Definitely not HD, though it says in the file propperties it is in fact 720x480. What am I doing wrong? What should I be putting in the 'interpret footage' section if any? I am also setting the playback resolution to Full so it cant be that either.
Please help!
Thanks heaps
Simon

Please help!
Premiere Pro is a professional application designed for professional use. To get the most out of it with the least difficulty, I very strongly recommend one have some basic education in video production before trying to use software at this level. For those unwilling to dedicate the time and money to such a proposition, there are a plethora of consumer editing programs out there that will probably be easier to use and offer less hassle. The Tools section of VideoHelp.com is a good resource for such programs.

Similar Messages

Poor Output Quality DVD vs. Mpeg

I recently scanned some slides at 360 dpi to a 4 by 6 size when I place them in the timeline they looked perfect. When I burned a DVD the quality was off a little bit especially at 1080p. When I exported as a computer file " MPEG HDTV 1080p 29.97 High Quality " and played it on the TV it was perfect...any suggestions why the DVD output quality was a little off (faces appears to be mottled and lines are pixelated).
I've tried different project settings and the results are the same except anything that's interlaced seems worse, more pixelated.
The Properties for most of the slides are as follows
Type:Jpeg
File size: 1.8mb ( and higher )
image size: 2159 x1439
Pixel Aspect Ratio: 1.0
Bill

fader5
Could you please clarify your question and its details because I am reading your details as 1080p formats as AVCHD DVD versus HD MPEG2.mpg file.
I am interpreting your question with no involvement of DVD-VIDEO on DVD disc.
I think that you have burned some photos in Premiere Elements
Publish+Share
Disc
AVCHD
with Presets = H.264 1920 x 1080p NTSC Dolby
and would like to see a bit "better" when at playback on your TV's player.
The following
When I burned a DVD the quality was off a little bit especially at 1080p
same except anything that's interlaced seems worse, more pixelated
forces my focus away from
Publish+Share
Disc
DVD
where there are no progressive offerings, just interlaced ones.
I am assuming that your player is a Blu-ray player that supports AVCHD DVD or one of the multi media players that supports AVCHD DVD.
Now when you export the Timeline content to file
Publish+Share
Computer
MPEG
with Presets = HDTV 1080p29.97, the MPEG2.mpg that you obtain displays better on your TV. What is the MPEG2.mpg on...USB Flash
Drive or memory card?
Please review and consider and clarify. Please excuse if I have misinterpreted your question. If I read it correctly, then I will offer comments
for the possible whys.
Thanks.
ATR

Extremely poor sound quality on all apps after using Real Player!

Hi there
On my Leopard iMac (Core2Duo) I am experiencing extremely poor 'lo-fi-like' quality on all audio from all applications including iTunes, Quicktime and Safari as a result of using Real Player to play a file online.
I very rarely use Real Player and this was the first time I'd used it in months to even a year. The file was a simple RAM file from a store website allowing me to listen to a sample of a music file. When played, the quality was low but I expected this from a music sample, and from Real Player. However, after closing Real Player, I noticed the sound quality had dramatically dropped to an almost un-listenable quality.
I have restarted and uninstalled Real Player with no luck. The poor sound quality still comes through my internal speakers, as well as external speakers, so it seems like a software issue.
Not sure what to do, please can anyone help as the audio is used all day every day on this iMac!
Thank you

Just tried it as I did get iLife with my Mac. GarageBand froze for the first few times I loaded it up, then I managed to get it to work. Played with the on-screen keyboard which produced perfect sound.
Closed GarageBand, restarted iTunes, tested, working perfectly! Crystal clear sound back again!
Thanks so much for that, really appreciated!
=]

Noob Question: Flowing Input Dataset Row/Record IDs Through to the Score Model Output

I've got a noob question that I'm having difficulty finding the answer to: if my input dataset contains row/record IDs and I want to flow these through to the Score Model module output but *don't* want to include this column in model training (because
it's just an arbitrary row tag), how do I go about accomplishing this?
I am able to Project Columns and eliminate the IDs entirely early in the process but then can't really determine which input row a prediction is associated with because I've lost the IDs. I'm not quite sure how to accomplish what I'm trying to do via
the Metadata Editor, either.
Surely somebody else has dealt with this same question. If the solution is implemented somewhere in a Gallery experiment that you'd like to point me at, too, that would also be just as good as a written explanation.
Thanks in advance,
Kevin

Hey Kevin!
Sorry for making this process unclear :( Azure ML has a notion of Feature Columns
(by default everything is a Feature), that is columns/variables that are intended to be treated as part of the observation vector. You can use the Metadata Editor
and (after selecting the column(s) you want), mark the column as
Fields -> Clear Feature. This will have the semantics you desire - data attached to the input data while not being used for training.
Regards,
AK

I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

Problem with both the speaker and earphones?
Have you tried another pair of headphones?
Yu can try the standard fixes to rule out a software problem:
- Reset. nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

Poor sound quality in timeline and export; fine in Source?

Hello all.
Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
I've tried everything I can think of. I hope one of you can show me what I'm missing.
TIA!
Mark
Premier Pro CC
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.1 (13B42)

Thank you for the reply!
I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
Anyway, problem solved, and thanks very much!

HP LaserJet 2600n poor print quality/streaking

I am the original owner of an HP LJ 2600n with a poor print quality/streaking issue. The poor print quality occurs with any and all paper that I use (currently Hammerhill 20# stock) and occurred with Windows XP and Windows 7. The print cartidges are all genuine HP and changing them does not make any difference. I have cleaned the front door roller with no improvement. My firmware version is 20070716. The black cartridge is at 33%; yellow 75%; cyan 91% and magenta 91%...
Any advice would be appreciated. An example of the output is attached below:

Hi everyone,
I have resolved my problem. I took a leap and purchased a new toner cartridge, and the new catridge works great. Installed it yesterday and the test page comes out clean, clear and with no double image. I'm happy.
Apparently the printer had not had a print item sent to it in over a year. I think that was actually hard on the toner cartridge.
Tthanks to everyone for their help via private emails!
mark

Syncing & Streaming from the same Library? - Noob question

Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
Thanks for taking the time to answer these silly questions.

That's not quite what I was looking for.
My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
I guess I will just have to play to try it out.

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

Poor Picture Quality in iMovie Which USB Camcorder Will Work and Which Won'

Dear Colleagues,
I continue to read accounts by readers regarding iMovie 98 havinga poor image quality when sharing to iDVD. It has been suggested that users with non-High Definition camcorders, standard DV8 camcorders such as my Sony DCR-TRV315, are stretching the Movie to far when using the Large and Medium setting for sharing ing to iDVD and other media.
If this is the case, what pixel size should I use when sharing to iDVD. I had understood that 720X480 was the standard format for non-High Definition Digital 8 Camcorders. So what correct pixel ratio should I use for DVD playback on a wide-screen HDTV with non-HD recordings.
I am planning to purchase a Sony USB camcorder and I continue to hear reports that they and other brands of USB camcorders won't work with iMovie 08. Is this simply a new user not fully understanding how his new camcorder works?
If this is not the case, how can one determine which USB camcorders are compatible with iMovie 08?
Please get back to me soon.
Best regards,
Robert O. Cobb
aka The Clemmons Kid

A great deal has been said about im08 degrading interlaced video, to qualify the matter im08 resorts to progressive video depending on the capabilities of your mac, I for example can achieve full quality 1080i exports.
Additionally the matter has to be put into perspective. Of course a source video looks clearer on a mac if it is displayed in it's original interlaced format on a frame by frame basis, but this isn't how one would watch video. interlaced video looks dreadful on a computer monitor and needs to be de-interlaced to be watched, additionally you would never watch a video frame by frame and so comparing video in this way is somewhat pointless. There is a quality difference on some macs but if the video is compared in a realistic way the difference is quite small and often unnoticeable.
720 x 480 as you likely realise uses non square pixels which will be converted to square pixels for your AVC exports in im08, to maintain the aspect ratio of the pixels you should export to DV.
There are a list of supported cameras here, but of course there are many that are not in this list that do work. If you select a camera, post to see if anyone has had any compatibility issues, but as you seem to be aware a number of apparent issues are as a result of user errors rather than incompatibility.

IDVD output quality

I'm trying to create a slide show with music using iDVD ver 7.1.2 running on Mac OS X ver 10.6.8 and the output quality is very poor. I'm using high quality jpg files some from Lightroom and others from Photoshop CS5. Both are highest quality when saving or exporting. I've tried all thee encoding settings in iDVD with no noticable difference. I've tried to drop the photos directly into iDVD and also tried to put them in iPhoto and export them to iDVD...nothing works for me. What am I doing wrong?

Hi
There are several layers to this
• DVD - is as Standard (whatever program used) - interlaced SD-Video - and can not be anything better than this.
• How material was created to iDVD matters
iMovie'08 to 11 - is not the tool of choise if quality is of importance - as they can not export interlaced video any way known to me - but does this by discarding every second line resulting in a sever quality loss
iMovie HD6 and FinalCut are so much better - as they can deliver 100% interlaced video over to iDVD
• How material is sent to iDVD matters
Share to iDVD - I NEVER USE as this makes iMovie any version to render (badly)
iMovie'08 to 11 - Share to Media Browser and as Large (NOT HD or other resoultion as this too degrades final quality) - forces iMovie to NOT RENDER and iDVD to do this (and so much better)
iMovie HD6 - just close it and import the movie icon into iDVD and iDVD renders.
Else my notes on DVD Quality
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn speed as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

L7780 poor print quality after not using for 6 months

Poor print quality after not using my printer for about 6 months. Ran thru the tools (clean printhead, aligh, etc . . .) didn't help. Replaced all chartridges, still no help.
I'm fairly tech savy, been in IT for 27 years starting with hardware support.
Question, can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
thanks
Brent

Hi @Brentl
Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Another Noobie question - readLine()

Hi all
This is another one of the extreme noob questions. I wrote a small program to read form a text file
    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){
            NetworkLine = in.readLine();
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }My Test.txt is
One
Two
Three
Four
Five
Six
without the *
The output I get is
Two
Four
Six
I cannot figure out why only even no. lines are being read. I inserted a breakpoint at the line
          System.out.println(NetworkLine);This shows me that only even no. lines are being read by readLine(). Any help will be appreaciated.
Thanks
Ayesha

    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){ // <-- This reads a line, checks it for null ,and drops it
            NetworkLine = in.readLine(); // <-- this reads the next line
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }So the upshot is that you print every other line.
Corrected:
    String networkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while ((networkLine = in.readLine()) != null){
            System.out.println(networkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }

Poor sound quality on some iTunes songs

Downloaded some songs from iTunes and realized a really poor sound quality on some files.
The worst example is "Precious" from "Depeche Mode" (Album version). It seems to me that the AAC file is encoded at a much too high level, so its overdriven and distorted.
If i burn the song to CD and than analyze the track in WaveLab it is obvious that the song was encoded with a level more than 6dB over the usual level and i can see a lot of clippings.
Downloaded another song of another band that i allready have on CD, just to compare... and this song was much better. Even this was 3dB over the original CD level (and the song on CD had a peak level reserve of only 0.1dB), but while listening that song i heared no negative effects...
So from my point of view iTunes is not really an acceptable offer if i can't rely on a minimum sound quality of the songs that i pay for!
So, the question is:
Is this normal or is the "Depeche Mode" album only one rare bad example???

Yes, of cause, tried all.
EQ off, or EQ with all sliders a little below 0dB.
With my tests i saw no effect of the EQ to the CD burning quality.
Only if i change the CD burning options (in german "Lautstärke anpassen", something like "adapt volume" or so), than i get a CD that has the same bad quality, only at a lower volume.
The same distorted and overdriven sound with clippings at a lower level (peak -12dB).
What if it's really a bad file?
Do they fix such files?
Will i have a chance to download it again? (without paying another time?)
PC Windows XP Pro

Real poor output quality (likely a noob question)

Similar Messages

Maybe you are looking for