Real problems with ISP based DNS and Domain
Hi all,
I have an external based domain name that would like to incorpate into my new server. At the moment, the ISP (1and1) is dealing with Mail and Hosting. Ideally, I would like to run the Mail Exchanger and leave the hosting to the ISP. However, I' having some trouble configuring the whole thing!
Firsty, I'm slightly at a loss as to what to call my DNS when setting up the server for the first time. Should this be the same as my current Domain name? If so, would htis cause conflicts running this name side by side with my ISP (even if it would just be used for file sharing etc?).
I have a few more questions but if anyone can help me with this one I'd be most greatful. I'm fairly new to Servers (one of the reasons for getting an OS X Server as I was told of it's ease of use!!) but willing to learn!
Cheers,
Oli
You can still get iTunes 9 for OS X 10.4, but you'll have to get updated to 10.4.11 first.
Here's the download link for iTunes 9:
http://support.apple.com/kb/DL1056
Let's test your internet connection. Perhaps your download is being interrupted along the way and you don't quite have the entire update.
Go here:
http://pingtest.net/
And let me know the results of the test.
~Lyssa
Similar Messages
-
Problems with Zone based Firewall and mtr (mytraceroute)
We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see
http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.:
<code>
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 100.0 8 0.0 0.0 0.0 0.0 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
7. de-cix20.net.google.com 100.0 7 0.0 0.0 0.0 0.0 0.0
8. 72.14.238.230 100.0 7 0.0 0.0 0.0 0.0 0.0
9. 72.14.239.62 100.0 7 0.0 0.0 0.0 0.0 0.0
10. 209.85.242.187 100.0 7 0.0 0.0 0.0 0.0 0.0
11. ???
12. ???
13. ???
14. bk-in-f94.1e100.net 0.0% 7 20.0 20.6 20.0 21.2 0.4
</code>
So it seems that the Firewall on my asr1001 is throwing away all packets with ttl-exceeded coming back from hops in between, they have another destination address.
At the moment I am inspecting all kind of traffic from my network outgoing:
ip access-list extended 101
permit ip any any
class-map type inspect match-all cmap1
match access-group name 101
policy-map type inspect pmap1
class type inspect cmap1
inspect
etc... (zones, zone-pair in-out with policies applied)
So I tried to let pass all icmp-traffic from the outside to my network:
class-map type inspect match-all cmap_icmp
match protocol icmp
policy-map type inspect pmap2
class type inspect cmap_icmp
pass
etc... (zones, zone-pair out-in with policies applied)
So this has no effect, but I tested and I could figure out, that when I pass all icmp-traffic from my network to the outside, THEN mtr does work.
BUT then normal ping does not work anymore, because it will not be inspected any more.
But I want to have a secure Firewall with inspecting echo-replys and working mtr anyway.
Has anyone the same problem or can even solve this issue?
Thanks in advance,
StefanHi Andrew, thanks for Your answer...
So I have now:
class-map type inspect match-any cmap_icmp
match access-group name icmp_types
ip access-list extended icmp_types
permit icmp any any ttl-exceeded
PMAP IN--> OUT
(don't be confused, my "vlanxxx_pmap_in" is the pmap FROM my network TO the outside...)
policy-map type inspect vlan664_pmap_in
class type inspect vlan664_cmap_in (this is an extended ACL "permit ip x.x.x.x any")
inspect
class type inspect ipsec_cmap_in (this is because I have problems with VPN when inspected, another problem...)
pass log
class class-default
drop log
PMAP OUT-->IN
policy-map type inspect vlan664_pmap_out
class type inspect cmap_icmp (here comes the "ttl-exceeded"-ACL)
pass log
class type inspect vlan664_cmap_out (some open ports for some clients)
inspect
class type inspect ipsec_cmap_out (same problem with VPN when inspected)
pass log
class class-default
drop log
But unfortunately, the same problem occurs. Curiously, the first two packets seem to go "through" the firewall, but with 3rd packet the packetloss comes up:
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 50.0% 3 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 50.0% 3 0.9 0.9 0.9 0.9 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 0.0% 2 2.7 2.7 2.7 2.7 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 0.0% 2 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 0.0% 2 2.5 2.5 2.5 2.5 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 0.0% 2 4.1 4.1 4.1 4.1 0.0
7. de-cix20.net.google.com 0.0% 2 5.0 5.0 5.0 5.0 0.0
8. 72.14.238.44 0.0% 2 39.2 39.2 39.2 39.2 0.0
9. 72.14.236.68 0.0% 2 5.4 5.4 5.4 5.4 0.0
10. 209.85.254.118 0.0% 2 5.4 5.4 5.4 5.4 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 2 5.5 5.3 5.2 5.5 0.2
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 66.7% 4 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 66.7% 4 0.8 0.8 0.8 0.8 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 66.7% 4 2.1 2.1 2.1 2.1 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 66.7% 4 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 66.7% 4 2.6 2.6 2.6 2.6 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 66.7% 4 4.2 4.2 4.2 4.2 0.0
7. de-cix20.net.google.com 66.7% 4 5.3 5.3 5.3 5.3 0.0
8. 72.14.238.44 66.7% 4 70.3 70.3 70.3 70.3 0.0
9. 72.14.239.60 66.7% 4 5.8 5.8 5.8 5.8 0.0
10. 209.85.254.116 66.7% 4 5.8 5.8 5.8 5.8 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 4 6.3 5.7 5.2 6.3 0.5
In the sessions on the routers, I see only this entry:
Session 206F66C (129.143.6.89:8)=>(8.8.8.8:0) icmp SIS_OPEN
Any other suggestions? -
Problem with Java-based application and WebVPN
Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks.Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks. -
Hi,
I am having major issues accessing the internet and loading web apps after the 6.1.2 update on my iphone 5.
Anyone else having the same...have tried all th usual resets etc.
So frustrating - why can't Apple test software releases properly!
Vivekhi
The problem is specifically on Wi-Fi, the apps that are persistently causing issues are:
Safari
Email
Facebook
Twitter
You Tube
The App store
BBC Iplayer
I keep restarting the phone which helps temporarily but then the Apps get timed out again. Looks like it cannot retrieve data over Wi-Fi.
Thanks for your help so far.
Vivek -
I'm having a real problem with my cursor which seems to have developed a mind of its own, zigzagging allover, highlighting things without my command, and basically making my MacBook unusable (it's taken me half an hour just to compose this!).
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad or mouse, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
Problem with java swing button and loop
Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
TomiThis is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime -
I have been having problems with my iPod touch and my WRT...
I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PMI had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection. -
Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.Send it as html so the signature is an image source URL
-
Problem with File Based replication in Weblogic Express 10
Hi,
We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
We are using File based session persistance in weblogic.xml
We have a shared location for all the three servers where we will be sharing the Session data.
When we start the application, its works fine and is very fast, but after sometime the application slows down.
Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
We cannot used Inmemory replication as our Appl doesnt support it.
Please advice as it is a major show stopper in our Production Mirror env.
Weblogic ConsultantIt is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
More details are here..
http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
Jayesh
Yagna Sys -
Problem with replication based on materialized view
Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer" -
Problems with ESS in "Career and Jobs" in option "Appraisal Document"
hi
My problem with ESS in "Career and Jobs" menu in the option "Appraisal Document" is not appear the appraisal documents or my my question is...
What I can customize for appear the "Appraisal Documents"?
My ESS shows the following screens:
http://img295.imageshack.us/img295/3451/appraisalportal.jpg (there is also a problem with the flash player, I marked with red rectangle)
I found looking on the internet that had to configure the Performance Management
I entered in SPRO tcode, follow these steps
http://img580.imageshack.us/img580/2598/appraisal1.jpg (Entered in "Define Templates in Performance Management")
http://img215.imageshack.us/img215/6233/appraisal2.jpg
http://img651.imageshack.us/img651/4243/appraisal3.jpg
http://img340.imageshack.us/img340/622/appraisal4.jpg
http://img52.imageshack.us/img52/1842/appraisal5.jpg (click in "End Configuration")
http://img534.imageshack.us/img534/8746/appraisal6a.jpg (Error screen part 1)
http://img4.imageshack.us/img4/1261/appraisal6b.jpg (Error screen part 2)
I hope the answers and posts, I wonder if my chosen way(configuring the Performance Managemente) is correct
thanks for posts
Ivanthanks Chris for comments,
Now I customize the "Appraisal Document"
http://img18.imageshack.us/img18/4640/uiapraisal.jpg (Here I can see the evaluation that was done in the back-end)
but, I clicked in the hiperlink of "Appraisal Document Name", I see this error:
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:<b>Page not found or not avaible</b>)
even before I saw another error (<b>"There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator."</b>) in others posts(questions in sap forums) mentioned, These included the following notes
1468466 Performance Management Launchpad Configuration
1463821 Performance Management Portal Configuration
1416756 OBN Configuration in Performance Management
1408243 Configuration for object-based navigation
They recommended me in the back-end include roles in the resources:
http://img401.imageshack.us/img401/8048/uiapraisala.jpg
http://img689.imageshack.us/img689/9359/uiapraisalb.jpg
The note number 1463821(especially), I recommend the following
<a href="https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1463821" target=nieves>note 1463821</a> (link note)
http://img88.imageshack.us/img88/7484/uiapraisal1.jpg (LPD_CUST tcode)
http://img266.imageshack.us/img266/7405/uiapraisal1b.jpg (Check in "Restricted Parameters" and "Active" - "EXT_HEAD")
but in these notes appointing a role that I could not find on my system that is:
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
because, I was looking at my porta's role (With reference "Appraisals Document")
http://img97.imageshack.us/img97/5167/uiapraisal3a.jpg
http://img413.imageshack.us/img413/5643/uiapraisal3b.jpg
http://img534.imageshack.us/img534/4585/uiapraisal3c.jpg
http://img203.imageshack.us/img203/4605/uiapraisal3d.jpg
Finally, my main error is :<b>Page not found or not avaible</b> (I referred at the beginning of the post http://img80.imageshack.us/img80/8157/uiapraisal2.jpg)
Why I see this error (Page not found or not avaible)?
http://img80.imageshack.us/img80/8157/uiapraisal2.jpg (Error:Page not found or not avaible)
I hope the helps, and thaks very much.
Ivan -
REAL problems with iMessage activation same with Face Time
I'm having real problems with IMessage activation same with FaceTime, the phone shows the activation is being made but it does not activate!
Apple ID and password is OK, it's working with other applications
Any ideas guys?!My daughters had the same problem with both of their iPod Touches. One logged back into iMessage and FaceTime, the other consistently would not login with the same error, "An error occurred during activation. Try again."
Check your date and time. Its likely incorrect. Once the date is corrected. Restart the device.
For what ever reason, some devices lose track of the date. In my case, apparently, my daughters change the date to affect a particular game by advancing the date. Little cheaters. (LOL)
Hope this helps! -
What is the problem with Western Digital HDD and OS X.9?
I received an email from Western Digital saying that OS X.9 could cause my files on my WD drives to be erased and to unplug all my WD drives until a fix is done. Is this a real problem and if so when will Apple get the fix out. I have joibs I have to get out to clients and this is a major problem for me.
Western Digital has found that their applications have got serious compatibility problems with OS X Mavericks, and they have to be updated to make them compatible with Mavericks.
Until then, keep the OS X version you have got. This is a Western Digital problem and this is why your main computer shouldn't be upgraded just after the release of a new Mac OS X version -
Problems with MSI K8N-Neo3 and Command Queing.
I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
Key system components for the two computers:
AMD Sempron 3000+
MSI K8N-Neo3
1 GB Kingston PC3200 DDR-SDRAM
MSI GeForce 6600GT or MSI GeForce 6600LE graphics
Maxtor 120 GB SATA disk (6L120M0)
Sony DVD-RW drive
Anyway, I wanna say thanks for the quick answers...Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not? -
I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.
Please authorize ADE 3 with same credentials that you used with older version of ADE
Maybe you are looking for
-
How do I get rid of the black edges going around my TV with mac mini?
I'm using my moms account right now. Well anyway, my dad decided the other day that we should connect this mac mini we have to the tv to use as a media center for movies and music. I got it all hooked up in no time flat, but I'm having this problem w
-
Error while running creating repository in OWB
Hi All, I am facing problem while creation of repositiory in OWB, at 31% OWB repository creation gets failed. Error message is "Process element SeedData.xml" 36% The warehouse builder repository Owner installation failed on user REP_OWNER INS0017: In
-
Blue icon with question mark instead of image in email
Sometimes I get a blue icon with question mark instead of image in email, when viewing in Apple Mail Program. Does anyone know why?????
-
Any possibilities to load Websites in high resolution?
-
Before installing the update to 10.7.3 I could connect to an SMB share on my Mac from Windows 7 but I can't any longer. When I try I get the error "Unknown user name or bad password" on the Windows 7 system. When I try to connect using the "net use..