Real-Time Computer crash: NI_MAPro.lvlib:ma_resample single-shot (coerce).vi

My real time desktop crashes when I log data. I log at 1000 Hz and resample the data to other sample rates (10 Hz, 20 Hz, etc.). Below is part of the error log. Please help me to decipher what the cause of the crash is. Thanks.
LabVIEW RT Error Report generated 11/5/2009 3:36:23 PM
Target code: 719C
Firmware version: 12.0
******************** LabVIEW Error Log ******************
#Date: Mon, Oct 26, 2009 4:59:13 PM
#OSName: PharLap
#OSVers: 12.0
#AppName: PH_EXEC
#Version: 8.2.1
#AppKind: AppLib
#AppModDate: 03/25/2002 20:14 GMT
LVRT.DLL load address: 0x003EE000
10/27/09 8:16:39.913 PM
.\exec\exec.cpp(3853) : DWarn: Internal error 2 occurred. VI "Startup-Remote.vi" was stopped at node " " at a call to
"NI_MAPro.lvlib:ma_resample single-shot (coerce).vi"
0x0049886E - <unknown> + 0
0x0046709D - <unknown> + 0
0x0042B74D - <unknown> + 0
0x0042C55B - <unknown> + 0
0x0042C666 - <unknown> + 0
0x00450B72 - <unknown> + 0
0x003A1013 - <unknown> + 0
0x00100DDC - <unknown> + 0
0x00194351 - <unknown> + 0
0x0023FD80 - <unknown> + 0
******************** RTLog ******************************

Hello,
The first thing that I would check in regards to this error is the state of your computer before it crashes. I believe that you may have a memory leak that is causing your memory to get used up and then you get the crash. Do you always get the same error when it crashes and does it occur in resampling VI?
-Zach

Similar Messages

Since downloading Maverick I have a long hang time, computer crashes, can't use word and I can't access finder, why?

Since downloading Maverick I have a long hang time, computer crashes, can't use word and I can't access finder, why? Also, iTunes is horrible. While I'm listening to my music iTunes will just stop playing the song for at least 5 minutes and I can't force quit why does it do that? This is the first time I have ever felt like my iMac is just as bad as a PC and I wonder if Steve Jobs would have let the program be relase to the public with all the problems involved. No wonder Maverick was free. IT ***** BIG TIME!

Hello, vanvu.
Thank you for visiting Apple Support Communities.
Since you are experiencing this issue with both a wired and wireless connection only on your home network and not at other locations, this issue would related to your router. I would first recommend power cycling the router and testing the connection again. If the issue persists, try updating your routers settings per the article below.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Cannot open two pictures at the same time - computer crashes

I have PSE7 and Windows7. I cannot open two pictures at the same time. When I go to open the second picture it crashes PSE7. Anyone know how I can open two pictures at the same time? What is the fix?

Hello Shawbrah
Thanks for your reply.
Yes, your method is actually the only workaround for a workplace with PSE7, but it isn't a solution for our enterprise network/domain.
There are different problems:
We have several computers with PSE7 installed. It does not make sense to manually install a local TCP/IP-printer on each PC.
We have many fluctuation in our company which means that the workplaces will often be moved and the PCs will often be replaced.
If the employees are printing over a local printer, our centralized printer monitor solution does not recognise print volumes.
The printers which are defined on our print server have special tray settings and these settings are "linked" to the core business application. Users should not be able to print with other settings, this could end in a chaos.
Finally to work with PSE in our company, there is no other way than upgrade to PSE8...
-Nicolas

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Real-time PID control and continuous buffered acquisition. Does it work together?

I use the "real-time PID control.vi" that acquires single AI point and generate single AO point in every "while loop" iteration to control a piezo actuator motion. Simultaneously I need to do (in another loop) a continuous buffered acquisition of another two AI channels (in the same rate as first AI channel).
It does not work together.
Does anybody know how to fix it?
Platform: LabVIEW 6.1
Board: PCI-6024E

Hi,
I would try to avoid the idea of using a separate loop since the PID
loop is a continuous acquisition and will require un-interrupted access
to the Analog DAQ system of the board. The last thing it needs is for
you to attempt to start other AI functions at the same time.
Configure your AI in the PID loop to read in multiple channels (Just add
some more channels to the Input Channels Control. Separate the data as
it comes out of the AI single Scan function using Index Array or other
Array functions into that needed for the PID and that needed for your
other data (the example is already doing this to make sure it only gets
1 channel of data into the PID). If you don't need to sample all your
channels of data all the time you can throw some data away as
required.
Obviously your other channels are now arriving one sample at a time so
if you might need to build an array, insert into an array or use Auto
Index on the loop if you are data logging.
Regards,
Dave R.
varmih wrote:
> I use the "real-time PID control.vi" that acquires single AI point and
> generate single AO point in every "while loop" iteration to control a
> piezo actuator motion. Simultaneously I need to do (in another loop) a
> continuous buffered acquisition of another two AI channels (in the
> same rate as first AI channel).
> It does not work together.
> Does anybody know how to fix it?
>
> Platform: LabVIEW 6.1
> Board: PCI-6024E

HT1553 What is the best system for a real time cloud back up of documents? My MacBook crashed, and I lost 2 hours of writing and could not find a way to restore it.

My MacBook Pro crashed while I was rewriting a book, lost more than an hour of work and could not find a way to restore it. Did not have Time Machine set up, but it appears that Time Machine does not have Real Time back up and documents must be manually stored.
I need an automatic, real time back up to keep this from happening - I'm not happy my MacBook has crashed twice now. What is the best cloud system for Real Time backup? Thanks to anyone who can help me, I'm not the most astutde computer guy... James

One way would be to use Dropbox, or a similar sync service, and just keep your critical documents in the appropriate folder. Dropbox, at least, keeps a local copy of everything and syncs automatically to the cloud whenver a change is made. Dropbox is free for up to 2GB of data.
There are also true backup services such as CrashPlan+:
http://www.crashplan.com/consumer/crashplan-plus.html
which provide automatic backups whenver a change is detected. It's not free, but usually such services aren't too expensive unless you need to back up a lot of data.
Regards.

I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this?

I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Building of exe crashing on "saving NI_MAPro.lvlib" what's wrong?

The majority of times I try to build an exe in labview 8.6, the compiler freezes on "saving NI_MAPro.lvlib". I have to restart labview and try again till it works. (and separately) On top of that if labview 8.6 crashes and I recover the file from the automatic file recovery function, labview again crashes when I try to save that file. So the file never can be recovered.
Aaron

Hi Michael,
Thank you for the reply. I'm using LV 8.5.1, but, at the moment, can't reproduce the problem when I develop a simple example project which builds an EXE that calls a plug-in.
So it seems to be a lvlib-related problem on my development station. I'll recompile the example there (later) and post the project if the problem recurs.
Thanks/Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Just installed Mavericks and my computer crashes 4-5 times a day now.

Hi. Just a few days ago I finally gave in and upgraded to Mavericks (10.9.5) from 10.6.8 as there was some software that I needed to use that necessitated the upgrade. Since I've upgraded, my MacBook Pro crashes at least 4-5 times daily. I am not doing anything unusual when it occurs. Usually typing an email, or switching between tabs in Safari or clicking save on a word file. In another post I was introduced to an app called Etrecheck which seemed to me to be a fine way to show all the Mac geniuses on this forum whats going with my computer (unfortunately I am not savvy enough to look through it and understand what's going on). I've posted the report below. Maybe someone can help me figure out what's causing my computer to crash?
The next time it happens I can also copy the report that shows up after the crash and post it as well. Many thanks in advance.
Problem description:
Since I downloaded Mavericks (10.9.5) my computer crashes randomly 4-5 times per day.
EtreCheck version: 2.0.4 (89)
Report generated October 15, 2014 at 8:07:20 AM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1680 x 1050
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 9:9:52
Disk Information: ℹ️
ST9500420ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (75.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 6 Titanium.app
[not loaded] com.roxio.TDIXController (1.2) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.IKMultimedia.driver.StompIO1 (1.0.0) Support
[not loaded] com.digidesign.fwfamily.driver (8.0.5f2) Support
[loaded] com.digidesign.iokit.DigiDal (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.boot.driver (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.driver (8.0.5f2) Support
[not loaded] com.digidesign.usb.elevenrack.driver (1.0.1) Support
[not loaded] com.frontierdesign.iokit.alphatrack (1.4.1f1) Support
[not loaded] com.ikmultimedia.driver.StealthPedal (1.0.0) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Qmaster: Path: /Library/StartupItems/Qmaster
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist Support
[running] com.eastwest.server.plist Support
[running] com.frontierdesign.alphatrack.daemon.plist Support
[running] com.sony.PMBPortable.AutoRun.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.digidesign.elevenrack.helper.plist Support
[running] com.digidesign.fwfamily.helper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
User Launch Agents: ℹ️
[invalid?] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
TomTomHOMERunner ApplicationHidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.2.0 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
iLokClientHelper: Version: 3.4 Support
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3
JackRouter: Version: JackRouter Support
Digidesign CoreAudio: Version: 8.0.5 Support
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in Support
Digidesign Eleven Rack Support
DigidesignMbox2 Support
Digidesign Mbox 2 Pro Support
Flash Player Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      10% com.apple.WebKit.Networking
      7% fontd
      2% com.apple.WebKit.Plugin.64
      1% WindowServer
      0% configd
Top Processes by Memory: ℹ️
172 MB com.apple.WebKit.WebContent
125 MB WindowServer
112 MB softwareupdated
86 MB Safari
82 MB Mail
Virtual Memory Information: ℹ️
25 MB Free RAM
1.46 GB Active RAM
1.45 GB Inactive RAM
856 MB Wired RAM
2.11 GB Page-ins
414 MB Page-outs

Sure enough the computer just crashed a few minutes after posting. Here's the report after the computer rebooted:
Anonymous UUID:       40656744-595E-FDB7-F6E9-0497F4D35619
Wed Oct 15 08:27:05 2014
panic(cpu 0 caller 0xffffff7f9fa95f7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80c5ad5000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80b3abaf80 : 0xffffff801d622f79
0xffffff80b3abb000 : 0xffffff7f9fa95f7c
0xffffff80b3abb0d0 : 0xffffff7f9e11bf1b
0xffffff80b3abb190 : 0xffffff7f9e1e550a
0xffffff80b3abb1d0 : 0xffffff7f9e1e557a
0xffffff80b3abb240 : 0xffffff7f9e464056
0xffffff80b3abb370 : 0xffffff7f9e208ba9
0xffffff80b3abb390 : 0xffffff7f9e12296d
0xffffff80b3abb440 : 0xffffff7f9e120478
0xffffff80b3abb640 : 0xffffff7f9e121dc7
0xffffff80b3abb710 : 0xffffff7f9f086e1d
0xffffff80b3abb890 : 0xffffff7f9f086823
0xffffff80b3abb8a0 : 0xffffff7f9f04baf0
0xffffff80b3abb8b0 : 0xffffff7f9f04bb65
0xffffff80b3abb8c0 : 0xffffff7f9f037c51
0xffffff80b3abb8e0 : 0xffffff7f9f036fd9
0xffffff80b3abba60 : 0xffffff7f9f066940
0xffffff80b3abbb20 : 0xffffff7f9f035ad9
0xffffff80b3abbb70 : 0xffffff801dacf146
0xffffff80b3abbb90 : 0xffffff801dad0741
0xffffff80b3abbbf0 : 0xffffff801dace1af
0xffffff80b3abbd40 : 0xffffff801d6b6998
0xffffff80b3abbe50 : 0xffffff801d626bc1
0xffffff80b3abbe80 : 0xffffff801d6139c5
0xffffff80b3abbef0 : 0xffffff801d61e013
0xffffff80b3abbf70 : 0xffffff801d6c9b9d
0xffffff80b3abbfb0 : 0xffffff801d6f4196
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000->0xffffff7f9e334fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9e33f000->0xffffff7f9e5e8fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
         com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 f024000->0xffffff7f9f0eefff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f9fa87000->0xffffff7f9fa9afff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9fa7f000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9df7f000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9fa82000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001d400000
Kernel text base: 0xffffff801d600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8076473822747
last loaded kext at 654256352755: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9fb9f000, size 335872)
last unloaded kext at 334416608476: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9e8bd000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.Cycling74.driver.Soundflower 1.5.1
com.digidesign.iokit.DigiDal 8.0.5f2
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

VI Server in the real time target and Vi client under the local computer

Hi,
In my project i want to make a data communication between a vi server which is runnig in the real time target and a vi client runs under the local computer (My Computer target).
My problem is when i Click the property terminal of the property node function (located on the Functions>>All Functions>>
Application Control palette) , i don't find the front panel open option from the shortcut menu.
Thanks.

The Front Panel options are methods. Try dropping an Invoke Node down instead of a Property Node.
Applications Engineer
National Instruments

My old computer crashed completly. I have a new computer now. It is a HP with internet 8 on it. I downloaded itunes but can not sync itunes to the new computer. Every time I try I get a warning that if i proceed then all my stuff on the phone will erased.

I recently bought a new computer becouse my old computer crashed. Now I can not sync my itunes account. I get an error when I try. It says that itunes will erase my phone content and replace with what is on the phone. I do not want to lose all my stuff so what do I do?

This is how it works.
Iphone will sync with one computer at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one.

Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

Report on what time a computer crashes

I'm getting power failures on random days, always off office hours. I'm trying to find where I can get info on what time the computer crashed.
I have it hooked up to a UPS so it's long enough to let the battery drain, and it's only one corner in the office. Other corners seem to get power fluxes but never long enough to drain their UPS's. I was considering that it might be the UPS but there have been several different ones in this corner and all had the same problem once in a while, and figured it would have been happening all day long, not just when no one is here.
In talking to the electrician he said it would be helpful if I could get a crash repot and find out what time of the day it keeps happening, so I was thinking I could find that on my iMac somewhere. I've found the Console crash reports and the Library/Logs/DiagnosticReports logs but I'm not sure what I'm reading, seems to mostly be application crashes, not whole system crashes.
Any hints would be awesome! Thanks for the help.
Amy

Open the Console application (/Applications/Utilities/Console). IN the left hand column look in these places
for the crash log. You can also look in system log for the reboot and possibly the messages from the UPS (if you have it connected to the system) for when the power first went out.
If the UPS is connected to the system you can set the parameters for how to react to a power outage in System Preferences->Energy Saver; UPS. This way at least the system won;t crash.

Real-Time Computer crash: NI_MAPro.lvlib:ma_resample single-shot (coerce).vi

Similar Messages

Maybe you are looking for