Real-Time does not show up as an add-in under NI Max after installing

We are trying to re-install Labview 7.1 Real-Time on a Windows 2K
PC.  I insert the Real-Time disk and it completes
installation.  After a Reboot, I check under
Softaware/LabView/Addins and it does not show up.  It also does
not show up as a target option when I start labview.  It worked
before applying the latest RIO patch.  After the patch, we
uninstalled all the Real-Time stuff via the Control Panel/National
Instruments Uninstall (apparently, the uninstall from the RT CD does
not actually uninstall anything)  We rebooted a directed after
uninstalling.  Then we reinstalled RT, rebooted, and nothing shows
up for it.  It seems like something is screwed up in the registry
or something.  Can anyone help!!!!
Thanks,
Chris

It may be best to clean your registry after uninstalling everything.
This is a relatively extreme step, but after this you should be able to
install (first LabVIEW, then any DAQ, then any add-ons and toolkits)
and see everything in the right place.
After uninstalling:
Remove the following registry components from the Windows Registry:
HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ , \ISA, or \PCMCIA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed.
Richard
Richard
Field Sales Engineer, New Jersey
National Instruments

Similar Messages

  • I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

    I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

    "The reply" as in the Rescue email to reset your Security Questions? If so, then you will have to contact iTunes Support directly to get them reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • How do I REMOVE an ADD-ON from my TOOLBAR, when said ADD-ON does NOT show up in my ADD ONS Manager?

    I have been instructed to:
    "When you open Firefox up in the left hand corner there is a drop down box that says "Firefox". Click on this and go to add-ons a new page will open with tabs on the side.
    Click on ADD-ONS, use ADD-ON Manager...."
    That does not happen that way. (I am on Firefox 19.0 for MAC.)
    When I click on Firefox (left hand corner at top of screen) "ADD-ONS" does NOT appear.
    I get "preferences" and "services" plus, of course ABOUT/HIDE/SHOW/QUIT choices.
    Running through ALL choices in PREFERENCES (which was not included as a step in your description) I find NO WAY to "deal with" ADD-ONS in General, Security, Privacy or Advanced.
    "services" says only NO SERVICES APPLY"
    I KNOW that I have an "ADD-ON Manager" I can open that. The ADD-ON that I need to REMOVE/Uninstall/Disable does NOT show there.
    It is an ICON on the lowest level of my toolbars showing above my window. Whether this is an awesome bar, or any other specially named bar I can't tell you, but: LOWEST section.
    This creepy ADD-ON (that I never personally installed) is called PRICEGONG - and it is now opening up a pop-up on all my eBay pages and elsewhere -trying to sell me things.
    It is wasting SO much of my time and I need to get it gone.
    WHAT do I do now? The PRICEGONG company has explanation of what to do to uninstall, but (no surprise) THEIR instructions/steps do not match reality either. RESULT: I can't get RID of this thing and am wasting huge amounts of time now with it.
    WHAT CAN I DO?

    hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
    [[Disable or remove Add-ons]]

  • I need to reinstall the RoboForm extension but it does not show up in the Add-ons Manager.

    I refreshed FF due to slowness and lost all my extensions. I need the RoboForm toolbar but it doesn't show up. What should I do?

    I went to my profile and deleted 2 of the files that were listed. I had closed FF before doing this then restarted FF. My RoboForm toolbar still does not show up. Can I get from you 'old' profile? If yes, how would I do that? Thanks!

  • How to uninstall IE11 when it does not show in control panel Add/remove so that I can put back IE10

    I finally got HP smart web printing software to work, now I need to know how to uninstall IE11, it does not show in Add/remove programs in control panel, I want to install IE 10 instead as IE 11 keeps shutting down.
    Using HP Pavilion Elite desktop , windows 7 home, product # AY603AA.
    Thanks in advance.
    This question was solved.
    View Solution.

    Emma, welcome to the forum.
    You can go into Control Panel / Programs and Features / Turn Windows features on or off (In the left column).  Uncheck Internet Explorer 11 and click OK.  This will uninstall it.  You can uninstall of install all of Windows features from there.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HP does not show any drivers for my P1006 under windows 10

    My Laserjet P1006 will not work now that I am using windows 10. HP does not show that they have new drivers for my P1006. Will HP be coming out with new drivers.

    Hi,Drivers should beocme available for Windows 10, as you may find listed below:http://support.hp.com/us-en/document/c04658195 In the meantime connect the printer and try following the HP Printer Install Wizard, it may detect a compatible driver for yoru printer:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PIW If that fails you may also try installing the Windows 8.1 drivers, there are good chances those will work on Windows 10:http://ftp.hp.com/pub/softlib/software12/COL21058/bi-55362-7/ljP1000_P1500-HB-pnp-win64-en.exe Regards,Shlomi

  • HT4623 My iphone 3 does not show "software update" as an option under general.

    My 3G phone does not give me the option "update software" under general.

    Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
    The iPhone 3G and second generation iPod touch can’t be updated past 4.2.1.
    (85327)

  • Ipad Usage time does not show

    I have just fully charged my ipad 4 but the usage time since last full charged is not showing anything. How can I get it to show the usage time?

    brodeuga wrote:
    Time no longer displays on DVR box. Please explain how to correct.You may just need to reboot the DVR...  pull power, wait 20 seonds, then plig back in....  see if that brings your clock back online.

  • My bookmark tool bar does not show even though I checked it under Options.

    When I go to FireFox/Help the toolbar shows. How can I get the tool bar to show?

    Part of me understands the need to have purchases protected.  I hope this does not get more and more complicated for "within family use".  It is nice to buy music and share it with my wife, as we used to do with books prior to the iBooks "upgrade" - which mostly consisted of making it impossible to share books.  Thanks though for your response;  I was hoping for some luck and that maybe I had missed some simple step.  To Apple:  lighten up.
    Best regards and thanks again for taking the time -

  • I downloaded a book to my Ipad and when I went to sync with Itunes on my PC- it removed the book from my Ipad, but shows it on the PC.  I have it "checked" to be synced but it still does not show up on my Ipad?  This also happened after I downloaded IOS 5

    I downloaded a book on my Ipad and after syncing to my PC, it was dropped from the Ipad, but shows up on my PC?  I have it "checked" to be synced but it will not come back onto my Ipad.  This is also after I downloaded IOS 5.1 for the Ipad.  Does anyone know why it would be dropped from the Ipad?

    Sometimes simply restarting your iTunes, the computer and the iPad is all that it takes to correct an issue like this so try that. Quit iTunes, reboot your computer, and restart the iPad. Then try the sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Time does not show on Date field

    Oracle 9i 9.2.0.8.0
    ojdbc14_g.jar - v9.2.0.8.0
    When doing a query for an attribute that is of type DATE I get the following type of result:
    Sun 01-Apr-2001 00:00:00
    I have tried casting it to type java.util.Date / java.sql.Date / java.sql.Timestamp...... and the results are the same.
    I've been told by the DBA that the times do exist in those fields.... so I'm assuming it must be the JDBC driver or perhaps a jdbc configuration or database configuration?
    Has anyone else encountered something like this?
    Thanks

    based on the following link (http://www.techienuggets.com/CommentDetail?tx=9493)
    I have to set oracle.jdbc.V8Compatible=true in my JVM.
    I'm using Websphere 6.1 and through the admin console (http://www-1.ibm.com/support/docview.wss?rs=457&context=SSBRLP&dc=DB520&dc=DB560&uid=swg21240038&loc=en_US&cs=UTF-8&lang=en&rss=ct457websphere) I set the property.
    Also, I'm using a spring/hibernate stack.... which I've also set the property
    ie:
    <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"
              p:driverClassName="oracle.jdbc.driver.OracleDriver"
              p:url="jdbc:oracle:thin:@${jdbc.host}:1525:${jdbc.database}"
              p:username="${jdbc.username}"
              p:password="${jdbc.password}" >
              <property name="connectionProperties">
                   <props>
                        <prop key="oracle.jdbc.V8Compatible">true</prop>
                   </props>
              </property>
         </bean>
    Still no luck. I'm still getting the time back as 00:00:0
    Any ideas?

  • I have the latest Adobe flash player installed but it does not show up in my add-ons or plug-ins on Firefox 3.6. In the plug-in check, it recognizes that the shockwave flash is up to date. How can I have the plug-in appear and be enabled on firefox?

    I have uninstalled the flash player and installed it numerous times with no recognition by the Firefox plug-ins. I also have uninstalled Firefox and reinstalled it as well. I have also restarted my computer several times as well. The flash player is certainly installed but not working on Firefox. Thanks in advance for your help.

    James j,
    You have a different problem. Your screenshot shows "The Adobe Flash plugin has crashed".
    See [[Plugin crash reports]] and [[The adobe Flash plugin has crashed]]. If you need more help you should [[ask a question|ask a new question]] (start a new thread).

  • URGENT Lenovo g550 webcam does not show up in Device Manager and all drivers cannot be installed

    Hello everyone. So my lenovo g550 webcam stopped working after I did a clean install of windows 7 home. When I go under device manager I do not see any unknow devices. When I also go to show hidden devices it is not there. Could anyone give me information about how to fix this and if the cable to the webcam might be broken. If so, is there a way I could convert the webcam's pin outs to usb to test it. I have split an old usb cable into four colored spots. Not sure if i want to test it though. That would be my last resort. If needbe, can you tell me the pin outs for the webcam. It has five connectors. The reason I know this is usb is because my older installation on windows 7 detected it and said that the usb could be faster. Thanks.

    Sorry about that. I've only been a member for a few days. I will remove the post with all Capps. Have a nice day!

  • MetaStream 3 does NOT show up in the Add-ons BLOCKLIST yet it is disabled and will not update. HELP???

    MetaStream 3 is listed as one of my add-ons. I believe it was used for videos. Since it was disabled, I have not been able to view YouTube and other video types. I get the message "The plugin for this content has been disabled. Click here to manage your plugins."

    The plugin you need is Flash. Go to Tools > Add-ons and select the plugins tab (the lego-block) and enable things.

  • Data in Health first got doubled and then does not show anything at all

    Hello together,
    i'm experiencing issues with the health app.
    Until yesterday all the data, like distance, steps, weight, was perfectly right collected and shown within health.
    Yesterday i went for a run and installed Runtastic and 'Runtastic Me' afterwards. First of all i checked, that both new apps were not allowed to write distance or steps, but to read them.
    Nevertheless the distance of my run got doubled in health. Since today health does not show any data at all, but Withings (which i had installed before and worked fine) an Runtastic Me show the data right. In health i cannot select Iphone 6 as data source, which i was able to do before.
    How can i fix this?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />
    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r32
    * Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

Maybe you are looking for

  • HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

    Hello I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition . I made an image of it , then deleted win partition from utility disk , ( wrong idea ) I didn't notice that boot camp  could erase win part

  • Updating a column of a table

    Hi all I have a problem in updating one column in the target table(say table A) from a column in the source table (say table B). All the columns in table A has been populated. Just one column should be populated. My source is a SQL object that contai

  • Calendar forgets notes added to existing events

    i use the calendar to keep track of my bills. the events repeat each month with no issues. i add notes to each event as i pay them. however, when i return to my calendar, my notes are not there. its incredibly frustrating. this was not an issue befor

  • Extracting employee photo to BW

    Hi Experts, Is there a method avialble to extract the employee photo uploaded in SAP HR to BW? My requriement is to display employee photo against peronnel number in xcelsius. Regards, Arun.

  • Further info about NSURLVolumeTotalCapacityKey

    I have the NSFileManager working to get data about the mounted volumes via: NSArray *keys = [[NSArray alloc] initWithObjects: NSURLNameKey, NSURLIsVolumeKey, NSURLVolumeTotalCapacityKey, NSURLVolumeAvailableCapacityKey, NSURLVolumeLocalizedFormatDesc