Real Time Job

Hello Friends,
Can someone send to my email ID all the work details of real time SD implementation. Also, in case if an SD Consultant is stuck anywhere, whose help he can take to go ahead by solving the problem, in case if he is not able to solve.
Kindly send to me without fail because it is very important for me to know before joining in any IT Company.

This is not a place to request documents to be emailed - but rather to learn from your peers , everyone here is doing this on their own time so the words "urgent" and all of that do not exist. There is plenty of data out there you can study and learn but emailing is not an option.

Similar Messages

Is there a way to create dependency on the real-time jobs

Hi,
We have around 80 real-time services running and loading the changed data into the target.
The process being used is
IBM Informix > IBM CDC > JMS (xml messages) > DS real-time services > Oracle EDW.
While using the above process, when ever there is change in the fact table and the dimension table, both the real-time services are loading the data at the same time into the target. This is causing issues in looking up data with the timing issue.
Is there a way where we can create a dependency and resolve the timing issue and make sure the lookup table is loaded and then the master table is loaded?
Please let me know.
Thanks,
C

Hello
With the design you curently have, you will have potential sequencing issues. There is no magic in Data Services to solve this.
You might want to consider building more complex real-time jobs that accept more complex data structures and have logic to process the data in dependency order.
Michael

IDoc not getting processed in Real Time job

Hello,
The configurations are done as per the below link to receive iDoc from SAP in BODS.
How to Receive IDOC in BODS from SAP (Outbound to SAP)
An iDoc is sent and Real Time Services on management console shows that request is received successfully. But I cannot see output xml file created. When I checked the real time services and client interfaces, I could see all are in green.
But the real time job status shows its in running state. It has been in running state for 2 days. Trace shows as below. There is no error message.
14.2) 04-24-14 18:47:41 (18417:1140171104) JOB: Optimizing job <JOB_BODS_RT_IDocMatmas01>.
(14.2) 04-24-14 18:47:47 (18417:1140171104) JOB: Job <JOB_BODS_RT_IDocMatmas01> is started.
(14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> is initialized.
(14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> using IN MEMORY Cache.
(14.2) 04-24-14 18:47:48 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> is initialized.
(14.2) 04-24-14 18:47:49 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> using IN MEMORY Cache.
Can anyone please let me know if there is anything missing in the configuration? How do I resolve this issue?
DS version: 4.2

Hi,
Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
IDoc 0000000000181226 was saved but cannot or should not be sent
Regards,
Priyanka

Real time job doesn't receive automatically changes in SAP ECC 6

Hi Experts,
 
 I'm trying to (using Data Integrator) automatically retrieve data from SAP ECC and store it in a local database table. I followed the steps written in this article: http://wiki.sdn.sap.com/wiki/display/BOBJ/Receiving+IDOCs. I'm modifying some records in the Cost Center Master Data (CSKS) and using COSMAS01 as the IDOC in which I'm trying to send the information.
 
 All seems to be OK, since I manually sent a Cost Center data row using the /nbd16 transaction, SAP ECC displayed a message telling that an IDOC had been generated. Also, when I checked the IDOC status in BD87 it had status 03, meaning that it had been sent correctly.
 
 In Data Services when I clicked on 'View Data' in the local database table that I put in the dataflow I could see the rows that I manually sent from the ECC. However, after truncating the local table, it bothered me that when I tried to send manually a second IDOC with another row from the Cost Center Master Data table, my real-time job didn't receive the request and consequently didn't insert the desired rows. I didn't change anything in the configuration, so my first question to any of you is that if you know what could it be that causes my real-time job to not receive the request from ECC?. I tried making a third try, but at my company they had to shut down the ECC server, so it's going to be a while before I make another try.
 
 Now, the REAL question of this post is that after I sent the first IDOC successfully (and before sending manually the second one mentioned earlier), I changed a record in the CSKS table directly in the ECC, hoping that it would automatically generate an COSMAS01 IDOC and send all the data in the table to the Data Integrator. This didn't happen and no IDOC was generated, so do any of you know why the automatic change didn't trigger the sending of the IDOC with the data?
 
 As I said before, I made the configuration in ECC and DI following the steps in the link written at the start of the post, and it was tested OK by successfully sending a COSMAS01 IDOC once, manually using bd16.
 
 In advance I thank you all for your cooperation. This is my first thread in the SDN forum so also please excuse any mistakes in my english.
 
 Best regards...

You do not need to schedule this job every 10 min. Why?
If we can't schedule this job every 10 mints how can I able to retrive the delta records into Queue(RSA7)
What is your advice I mean how to schedule in order to get the delta?
Thanks

Webservices for real time job.

Hi all,
I have configured a real time job that is available as a web service. There was no problem for the first time. However I wanted to change some of the input and output fields on the real time job.
So i modified the real time job in the Designer.
I removed and created the Real time service in the administrator. I have also renamed the Real Time SErvice.
I recreated the webservice for the renamed real time service.
However I am still getting the "old" wsdl with the old real-time service name.
Seems like the WSDL is not updated.
Am i missing out any steps to "refresh" the wsdl?
Thank you.

which version if DI ?
the WSDL should get updated once you add the Real time Service to the Webservice
do you see the Real time service in the WebService status page ?
click on View WSDL, it will open the WSDL in IE, do a find for the service name in that

Real Time Job with no Message Target?

Hi All. I'm curious to know if anyone has built a real time job without an xml message target. I thought that any message source 'getting' from a Topic does not require a response. Well data services is not letting me get away with not having the message target.
The message I'm receiving is one that I want to insert into a table, it is not being used in a lookup to then send out a new record out to a message target.
Real Time jobs are still a new concept to me. Thanks in advance for your help.

Hi,
Try using a row generation transform, generate one row and pass a hard coded value as output message. You cannot do away with an output message in the case of real time.
Regards,
Suneer

File lock in real time job

Hi All,
I encountered an file lock error when creating a real time job.
After a dataflow, I have a script to move the processed file to archive folder. (e.g. move c:\source\order.xml c:\archive). When I test run it, I received a 50306 error. It saids "The process cannot access the file because it is being used by another process. 0 file(s) moved.". However, the df and script were running OK in batch job. Also, I can move the files manually after the job failed. Can anyone help me with that? Is it something to do with the setting of realtime services?
Many thanks!
Knight

hi,
Not sure but you can check in sm12 if there is any lock entry, if so than manually delete and than check again.
Ray

Triggering Real time job from Batch jobs..

Can we trigger real time jobs from the batch jobs. As soon as batch job completes we need to start real time job automatically. Is this possible with BODI XI?

Greetings Post Originator,
This post is older than 60 days and there are no entries in the past 30 days. Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible.
Thank you for being an active participant in the SAP Forums,
Rob Siegele
Forum Moderator
SAP Americas

Error while running Real Time Job through SOAP UI

Hi Experts,
I am using real time job for search the duplicates in the data base using attribute values. After running the job iam getting correct result in the xml message.
I configured real time job in management console and taking the WSDL and giving the in put in SOAP UI then iam getting the message like this after 2 timedouts.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Sender</faultcode>
<faultstring>Web Services is unable to process the request to call real-time service 'RT_SEARCH' using Access Server 'uplt-abk-052:4000'. Error: Server sent back error: Communication Error. See real time job log for details.</faultstring>
<faultactor/>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
In the real time job log file iam getting the message like this
(12.2) 06-01-10 09:37:41 (E) (0620:2732) Unknown: SP(RT_SEARCH, UPLT-ABK-052:3501)::flowThread() Flow became invalid while waiting for reply from real time job. (BODI-300136)

In Management Console,
PLease take a look at websevices-> partciular JOB-> historyLog-> errorlog and tracelog to see the more details of the error. It should definetly whats the cause of the error.
-Subhadra

WSDLXML error in Web services for real time job

Hi Experts,
I want to use Data Services as a web services.
I have configured a Batch job and Real time job that is available as a web service.
Web services for Batch job is no problem. but Real time job is problem
I get the following error message in the WSDLXML
<tns:documentation>Web Services published by BusinessObjects Data Services Version 12.1.0.0, using Apache Axis 1.1The following errors and warnings were found during WSDL generation. Please refer to the Data Services Administrator for detailed explanations. *** Unable to create WSDL for service: job_testconnectivity.</tns:documentation>
Version is DATA SERVICES XI (12.1.0.0)
Edited by: moon bum cho on Dec 1, 2008 3:00 PM
Edited by: moon bum cho on Dec 1, 2008 3:15 PM

check whether the Access Server for which this service is configured is running
the real-time service configuration is saved with Access Server, management console will get the information from Access Server while generating the WSDL
to check the status of access server
click on administrator -> Access Servers
click on the Access Server and click on Ping

Introductory DI real-time job materials?

Hi, Has anyone come across any useful real-time "getting started" guides/ presentations/ reference materials / etc? We are on version 12.2.2.0. Up through today, we have used DI only for batch jobs but need to get familiar with the real-time side...
Thanks in advance!

Hi
This was written for Data Integrator, but the material is still valid.
http://www.sdn.sap.com/irj/boc/ds?rid=/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08
Michael

Real time jobs Deadlock issue in edq-cds-9.0.4.(645)

Hi,
I have installed EDQ(edq-9_0_8_(1103)) and EDQ-CDS pack (edq-cds-9.0.4.(645)).
I have imported the edq-cds project after completign the initialization of refrence data.But when trying to run the Job Start All , only few jobs gets started and others are in deadlock waiting for process to be released.
When i debugged it seems like same process
Match Results - Prepare
Cluster Realtime
are used by both Rela time individual and entity jobs.
Is anyone facing the same issue?
Thanks

Hi,
Apologies for the late response. All forum watch notifications were disabled in the forum migration and we were not made aware.
The reason for this is that the jobs have to be run with a run profile and run label in order to ensure the various jobs that share processes do not lock each other out. This is in the documentation. The Director UI is for design and jobs should not be started from here except by scheduling. Please run the jobs with the right run profile and run label from the Server Console UI following the CDS documentation.
Regards,
Mike

Unable to Run Real Time Job Idoc Processing.

hi experts,
i am trying to run a job in which i m trying to process a SAP IDOC.
my source is an MATMAS03 type IDOC MESSAGE.
I m running it through Management Console.
the RFC is working fine, but when the idoc is getting processed, at the end i m getting the below error.
*(12.2) 12-28-11 18:11:08 (E) (6132:5932) Unknown: R3RfcClient(DI_CLIENT) ActaIDocFunc::Process() encountered processing error for Requeste(1) (Processing timeout.) (IDOC
                                                  0000000000650143+/T90CLNT090). (BODI-300129)*
here DI_CLIENT in my RFC, which i have maintained using the below link:
http://wiki.sdn.sap.com/wiki/display/BOBJ/ConfigureSAPtosendIDOCstoDI
please help me share if u have any other link or sample document to transfer data from SAP ECC using IDOC.
thanks

Hello Sasha,
     I am also getting the same problem but apart from error 300129 i am also gettiing 300137.
     Is it that way that i have to use "R3RfcClient" only as the Program ID.?
    Do you have any clue to solve other error also?
Thanks in Advance.

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

Best practice for Near Real time with Oracle

Hi,
We plan to run a scenario to demonstrate DS ability for real time or near real time scenario.
We identified different solutions and we are trying to choose the most appropriate :
- Oracle 11g + Sybase Replication server + Data Services
- Oracle 11g + Data services : real time jobs ( xml messages )
- Oracle 11g + Data Services : CDC scenario
I need to load data into a SAP Sybase IQ database : is there any known issue with one of the previous solution ?
The challenge is to load a set of 10 tables, for more than 5 millions rows,
Thanks for your advices,
Guillaume

Hi!
Didn't anyone have this requirement for migrations? I have tested with the mysql select into file clause. Seems to work for simple data types - we're now testing with blobs...
Markus

Real Time Job

Similar Messages

Maybe you are looking for