Real-time photo resolution info?

I had been using Quark 8 for a few months and now am back to ID CS 4. While using Quark, I noticed that when you re-size a photo by dragging its frame, Quark will tell you in real time what the effective dpi is of the current size of the photo. In ID, it seems I have to use the INFO panel, which doesn't update in real time. I have to resize the photo, then check out the INFO panel to see what my dpi is, then adjust some more. Is there any way to watch the photo dpi change in real time as I adjust the size?

If you wait a moment before you start to drag the info panel appears to update in real time. Showing effective ppi in the links panel is also pretty close to real time if you don't drag too fast.
Peter

Similar Messages

Gap resolution is not always happening with real time apply

Hi
I noticed a strange behavior in one of my 10.2.0.4 dataguards , and I am wondering if anyone else has encountered it :
When there is an archive gap that need to be resolved , the gap is NOT always being identified and acted upon , when the recovery is started as such :
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION.
its just sitting there doing nothing, and nothing is written to the alert log regarding the gap and nothing is being transferred from the primary as needed.
However, if I restart the apply , omitting the 'USING CURRENT LOGFILE' clause , the gap is identified and acted upon, as such :
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION.
At first I thought its merely due to me stopping and starting the apply process ( nothing like a "reboot" , right ? ) , but that is not the case.
if I restart , but still use the USING CURRENT LOGFILE clause , the gap is still not being identified .
Anyone had this issue ? any theories as to why that happens ?

Using Real-Time Apply to Apply Redo Data Immediately
http://docs.oracle.com/cd/E11882_01/server.112/e25608/log_apply.htm#i1022881
1.What is compatible parameter, it should be 11.1
2.Try to check parameters mentioned in below link:
http://easyoradba.com/2011/01/10/real-time-apply-in-oracle-data-guard-10g/
Regards
Girish Sharma
Edited by: Girish Sharma on Nov 15, 2012 12:37 PM

RAM Preview in real time with Matrox Mini

I followed this thread with interest. I upgraded from Production Premium CS5 to CS6 last month. I haven't been able to get Realtime RAM playback since. I'm also monitoring using a Matrox mini and am wondering if this is factoring into the problem. I recently replaced my mini because I was losing communication with the box. I did notice, with the box out of the equation, that RAM playback was in realtime. My test comp runs 5 seconds at 29.97 fps, just a photo moving from point a to b to c, with blur, over black. When I try RAM playback, the message I see is: fps 11.xxx (xxx because the frames vary slightly throughout playback)/29.97. Note: Zoom in not 100%. Interesting thing is that when I delete the photo layer and just keep the black, RAM playback seems fine.
I did adjust my RAM allocation a little, to no effect. Here are my specs:
Computer:
Windows 7 Professional, SP1
i7-4930k 3.4 GHz (6 cores, 12 with hyperthreading)
RAM: 32 GB
GPU: Nvidia GeForce GTX 770
Here are some memory settings:
Installed RAM: 31.9 GB
RAM for other applications: 6 GB
RAM shared by AE, Premiere, Prelude, Encore, Adobe Media Encoder, Photoshop: 25.9
Installed CPUs: 12
CPU reserved for other applications: 2
RAM per CPU: 2 GB
Actual CPUs that will be used: 8
Preview info:
Texture memory: 796 MB
Ray-tracing: GPU
Open GL
Vendor: NVIDIA Corporation
Versions: 2/1/2
Total memory: 1.94 GB
Shader model: 4.0 or later
Cuda
Driver version: 6.0
Devices: 1 (GeForce GTX 770)
GeForce GTX 770
Current Usable Memory: 1.68 GB (at application launch)
Maximum Usable Memory: 2.00 GB
Let me know what else I can tell you. Thanks for any suggestions.

If you disable video preview in After Effects to the Matrox device, does RAM preview run in real time?
In After Effects CS6: Preferences > Video Preview, set Output Device to Computer Monitor Only. Matrox devices may also require you to disable WYSIWYG preview in their control panel.
When video preview is enabled, every frame is transcoded on the fly at display time to the format (dimensions, PAR, frame rate) requested by the device. This requires some memory and processor power and has an impact on performance. If having video preview enabled is in fact contributing to the issue, you can reduce the memory requirements of the frame (and therefore the processing power required) by reducing the RAM preview frame rate or resolution values in the Preview panel, reduce the project color depth, or disable color management in the Project Settings.
Worth noting here that After Effects CC 2014 (13.0) uses Mercury Transmit for video preview, instead of the older QuickTime and DirectShow technologies, and while it is still subject to the limitations above it provides better performance.

Issues with Real-time Playback?

Hello,
I am working on an animated film and I am having trouble getting my footage to playback real time in Premiere 6. It is making it impossible to edit.
It plays choppy. Will stop on a frame. Doesn't catch up on the edits.
Here are my computer Specs:
MacBook Pro
2.5 ghz intel core i7
8 gb mhx DDR3
AMD Radeon HD 6770M 1024 MB
OSX Lion 10.7.5
Sequence Specs:
24 fps
1980x1080
spuare pixels
progressive scan
24fps timecode
48000HZ
Footage Specs
24 fps
1980x1080
h.264
file size between 2MB - 300KB
Sequence length 4:18
I have trolled all of the forums to see if there was anything to change to no avail:
I tried both setting the Project set to MPE with GPU amd MPE with software. No difference either way.
Playback resolution is at 1/4
I've closed all applications.
Optimized my drive.
Restarted.
Updated to 6.0.2
Anyone have similar issues? Any ideas on my set-up?
Thanks,
sasha

I am sorry. I actually posted other questions here and I have always put my
computer info at the end of my questions. Yesterday I was browsing around
and I noticed that under the profile you created a specific place for the
computer info. So I thought that perhaps it would be the proper way to do
it . Apparently I did the vwrong thing. Also to ask a question on the web
is something that we all do without thinking anymore. Everything is free
and we take everything for granted with no intention whatsovere to take
advantage of anyone and neither did I in this instance. My apologies. I
will follow up with my computer specifications tonight when I get home from
work. Thank you.

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Updating a Real-time Infocube

Hi All,
In one of the requirements in BPS planning.
We are using the Exit function for validating the data.
In our function module we are fetching the data and two of the fields in the cube needs to be modified in the cube after completion of the validations.
I would like to know if there is any existing functionality or Function module in BPS planning for this for updating the Real-time Info cube.
Thanks
Prathish

Try this link:
www.geocities.com/cynarad/reference_for_bps_programming.pdf
In the chapter where table xth_data is described more detailed this can be one possibility to validate your realtime IC.
Have fun,
Clemens

How can I change a Mixer filter in real-time? (11.5)

Hi all,
I'm currently coding (or trying to code) an interactive soundboard that users can play with in their software. They can turn inputs on and off, increase the volume, change the EQ, etc. The nice is, and I was really pleased to discover this, Director already has a feature called an 'Audio Mixer' that has filters to satisfy all these functionalities! The bad thing, I can't figure out how to change these filters in real time.
For example, here's the code to MUTE a specific mixer (activated when the user toggles a button):
member("channelOneMix").mute()
But how do I tell it go INTO that mixer, find the existing High Pass Filter, and change the value of that High Pass Filter's 'highCutOffFreq' property? It's a classic case of knowing exactly what I need to tell the code to do, but I have no idea of the SYNTAX of actually telling it to do that.
I hate to be 'that guy', but it is somewhat urgent. This is for a college assignment due Wednesday (yikes!). I didn't quite know what I was getting myself into with this code, but the end is in sight if I can figure out how to write this particular code.
Many gratuitous thanks in advance for any assistance!
PS: It won't be enough to simply add a new filter to the list. The user needs to be able to turn a dial up or down to increase or decrease the High Pass Filter, in conjunction with several other dials manipulating other filters. I need to be able to actually change what the filter's value is.

Thanks for your help!
The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
I don't if this post is comprehensive. I'm not sure.
Thanks for your time!
Jordi

Error while data loading in real time cube

HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.

BT NetProtect plus – Real time scanning and update...

I have posted this message as both a pointer in case others have the same issue as well as whether anyone has found a proper resolution.
I have recently experianced problems with my BT NetProtect plus indicating the Real time scanning has stopped and any attempt to restart it does not work. This is accompanied with it keep promptig that there is a new update and to restart the computer. This happened every time I logged on.
I had spent some considerable time with the BT support people who have now reinstalled the software about 6 time's after the 2 time I had already tried.
I run Windows 7 64 bit and recently installed an SSD drive. The key thing I have subsequently discovered in my upgrade is that I changed some registry settings to make my default installation location to be my D: drive. I followed this post :
The 64bit version has two versions of regedit. Make this change as well:
1.) Enter into Start>Run: %systemroot%\syswow64\regedit 2.) Go to: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion 3.) Change the Path in DWORDs ProgramFilesDir, ProgramFilesDir (x86) to the new path, probably just changing the drive letter
Everything works fine apart from BT NetProtect plus which when installed new has the above issue. If I change the default install location back to C: drive then it installs OK and works OK when I subsequently change the default install location back to the D: drive. When I say works OK, that is until BT NetProtect plus issues a major update when the same problem appears again.
I am waiting further contact from the 3rd line helpdesk but the 2nd line team did not seam to know of this problem.
Has anyone else experenced it or know of a proper solution ?

A full McAfee scan on my desktop PC can take about 2 hours or so and a full scan sometimes slows down my over 3 year old desktop PC. Thats why I only do a full McAfee scan every once in a while but I do a quick McAfee scan every 6 or 7 days.
I do like the McAfee shredder though and use that now and again. I also got McAfee quick clean set to run at lest twice a week.
I have used Norton in the past and that slowed down my last PC more than McAfee from BT. The free version of AVG is good but its only an anti-virus. Some say the windows firewall is ok but not the best.
I also have windows defender set to do a quick scan every evening around 9pm. As most nights I have my Desktop PC on at that time.
I also do a disk clean up at leat once a day.
Darren

Real time project Help

Hello
I've been given a new project to attempt which involves developing a java application which takes real time data from the internet, stores this data in a database and then allows manipulation of this data. Any info about how this could be acheived would greatly appreciated.
Many Thanks

I intend to design a system which takes seismic data
from specifc web sites and calculate the risk of aSo you have a program that runs periodically to collect the data from
different places, transform it to your format and store it to a database.
and your sources are Webservices OR you plan to get an html pages and
filter out what you want OR a mix of both.
the second program can take the data present in the database at that
moment and give the tsunami probability
tsuinami occuring from this. I would like to know
which database software would be the best to use.That depends on your design constraints. Firstly you need to decide what
kind of a database you want ( RDBMS, obj dbs, ..) and then lock on a db.
A relational db may be what you decide on and in the free domain you have
say MySQL
Also how can i set up the data transfer, could this
be done with the java.net api using the url
resource.In case you are picking htmls, yes. If webservices are available, check out
stuff like apache AXIS..

How to get last Build date of a dll in the real time target

Info On My Project
I am working on LabWindows CVI 12.0 for development . This project is a real time application for hardware, which is having Phar Lap ETS as RTOS...
I am facing some problems while checking Build date of my Application file( .dll)
I have tried to use GetFileDate API. But it is not supporting for realtime Target..
So i have tried __DATE__ macro.. That also having some problems..
How to get last Build date of a dll from the real time target ??
Please Help to solve this....
Thanks
Vaishakh A K

Please reply if any one have suggestion...

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

Getting video to play real time in an NTSC monitor question?

I’m trying to get video in my NTSC preview monitor to play real time. It will send a picture to the preview monitor but will not play real time even when timeline is rendered. I’m coming out of the back of my video card (ATI Radeon 9600) through a DVI cable to my HDTV monitor. Do I need a Firewire digital to analog converter box in order to see video in real time? I don’t want to use my camera as a pass through. Does FCE support a second monitor at all during editing?
Any info greatly appreciated!

Thank you so much for the reply! I just purchased a Firewire Datavideo DAC-6 DV to Analog Video Converter and it even has component out to the NTSC monitor. It will be here on Wednesday! Good to know I can run a preview monitor while editing. Thanks again for assisting me.

Basic 24" iMac 2.8GHz (Penryn) Captures HDV As ProRes In Real Time.

It's OK I'm not claiming any records.
It's just that I have been reading a lot about capturing ProRes from HDV and there are lots of warnings that capture will lag behind real time even with PowerMacs etc.
I was therefore pleasantly surprised to find that my unmodified iMac captured everything in Real Time even though I had 5 other apps open at the same time.
People often ask whether an iMac is suitable for FCP. This in no way is a definitive answer but it does suggest the iMac is certainly no slouch!

Ian R. Brown wrote:
People often ask whether an iMac is suitable for FCP. This in no way is a definitive answer but it does suggest the iMac is certainly no slouch!
Fantastic, Ian!!
Love the photos and I'll wager that pig was awesome. I'm a lifelong carnivore/omnivore and can't imagine a day without bacon.
Yeah, the iMac. No one here has ever doubted it's processing capabilities at all. Where the iMac lacks is with it's abject lack of expansion beyond it's firewire ports and if one goes into that limitation eyes wide open, then there is no reason at all one can't be productive with an iMac.
For whatever it's worth, I'm too timid to capture video with any other application save FCP working.
Zeb

How to implement the Transfer Function in Real Time VIs?

Hi all,
I'm relatively new to Labview Real Time modoule and want to implement one Controller(not PID one) in Deterministic Loop! I have already designed discrete Transfer Function and searching for the way to build one Controller with it! Is it right to use the Simulation Loop instead of Timed Loop (in this case Deterministic loop) and implement the controller in it?! If it's correct so, should I use the same clock and Priod as Timed Loop?!
It would be very helpful, if there is an Example about using transfer function in Real Time Loops!
thanks for your help,
Mohsen

Hello mhmdi,
Sorry I can't open your VI (looks like it is a new version of LV than I have installed).
You're right - you don't need to convert to a difference equation if you have the CD&SIM Module which can take discrete time transfer functions directly. You don't need shift registers with this function, as it is effectively done internally. If you don't have CD&SIM discrete TF's can be implemented easily just in a timed (or while) loop with feedback nodes or shift registers to replicate each z-1 you need.
Some more ideas:
There are many configuration parameters and options with the Discrete TF VI - which you need to understand for your application and make sure are correct. Sometimes implementing in a basic form (timed loop and shift registers) allows you to see what is happening without any confusing options you might not need.
Are you using the Discrete TF VI in a Simulation Loop ? You might need to think if the loop being used is appropriate for a Real Time application. Maybe the timing of the TF, the loop and the DAQmx data are not all suitable for each other.
I'm not familar with DAQmx, so not sure about any specific real-time aspetcs of that.
"if the sample frequency of the discrete transfer function in the timed-loop is at multiple integers of the sampling rate (e.g. 12000 Hz for tranfer function and 4000 Hz for sampling rate, 12000=3*4000), would it somehow improve the resolution of the controller command?"
This could actually make things worse - but depends on your transfer function if it is a problem. Think about it this way - in the scenario you state the input signal going into the Discrete TF will only change once in every three samples, that means if your transfer function includes a 1-z^(-1) factor (i.e. a derivative) - that will be zero for two samples then jump up for the next sample. You'll observe a very jittery/noisy signal, but the noise is due to samples not being correct. This will also occur if the sample times are very similar but go in and out of sync where you may get the occassional sample that is the same and hence the occassional zero in the TF.
In an application I had we had problems trying to get the data coming into a timed loop and the timed loop itself synchronise, and before it was fixed the control signal was very jittery.
Consultant Control Engineer
www-isc-ltd.com

Real-time photo resolution info?

Similar Messages

Maybe you are looking for