Real time speed change mixing

Wondering if a way exists for me to make on the fly speed changes in real time while doing a voice over. Would like to just play a clip while recording my voice over and be able to freeze the clip while I continue to talk, then hit another key to start the clip moving at regular speed again all while I continue to talk. I don't even necessarily have to do the voice recording using FC. Just would like a way to do this which is a lot like real time audio mixing, but with speed changes. thanks.

The VO tool in FCP requires real-time sync to the playhead, so that won't work that way.
SnapZ allows you to record an image of the desktop, system audio (FCP playback), and the Mac's built-in input all to separate tracks of a QT file. I have used this for software instruction videos. There is a quirkiy issue with snapZ and frame rates. I posted a good workflow to address this a few months back. You would only need to do this if you were going to use the video recorded with SnapZ.
Hope this helps - -
Max Average

Similar Messages

Need to monitor any file change in the system, in real time

Hi,
I am running a program that I suspect may be doing changes in the filesystem, but I do not know which ones. I would like to know if there is a daemon/program that could help me monitor those changes. I tried AIDE, however, it works by creating a database of checksums for each file and does not report in real time potential changes. I would rather use a program that logs changes and timestamp them. Furthermore, AIDE is not useable with /var files, since there are many of them and they change so often. Is there another good solution?
Alternatively I would like to run the program with monitoring. For instance, run the process as:
monitor_program my_program_to_monitor logfile
This would dump in logfile what my_program_to_monitor does to the filesystem.
Thanks in advance.
Last edited by zebulon (2011-08-24 15:44:10)

no, at least with inotifywait, it is not possible. once you know what file is being changed you can use "lsof" to see what process have opened that file.
i tried the following to search lsof output first thing when inotifywait finds a file change.
file=$(inotifywait -r /home/mang/watch --format %w | sed 's/.$//'); lsof | grep $file
while in another terminal running "vi /home/mang/watch/test"
the output is:
zsh 12574 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
vi 16790 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
try it!

Real time fan speed and temperature of the Thunderbolt Display

Is there software program that allows you to know the real time speed of the itnernal fan of the Thunderbolt display. Also I would like to monitor the internal temp of the TBD. I have Istat which allows me to do both but only for my MBPro not my montior.
Thanks.

Have you ever cleaned you machine? Since it's an iSight (which is actually 3rd generation, Ambient Light is the 2nd, Rev A the 1st), you can't open it but you can vacuum the air vents, which might help.

Cannot check real time access while creating infopackge

Hi all,
I am getting an error while trying to create a real time infopackage. I have made my datasource real time by changing the real time flag in ROOSOURCE but while creating the infopackage the real time check is greyed out.
I had read in some other message in SDN that you can make non-real time DS into real time by changing the flag in ROOSOURCE any ideas.
Also we are in content 7.0.3 and I dont see any business content either in ECC or BI in ROOSOURCE table with real-time flag marked X. Does SAP delivery any content which are real time or am I missing something here?
thanks for your input

Hi Raj,
You can create the Real-Time infopackage only after creating the info-package for Init Load. The check box for Real-Time is not enabled if Initialization load is not run. Though this check has to be made only after creating the Real-Time Datasource correctly.
Go to RSO2, enter the datasource name, and open it in edit mode. Then choose the option 'generic delta'. Give the field on which you want the Delta pointer to be set (The field you want to enter here should NOT be hidden from SAP BW). Importantly, check the option 'Real-Time Enabl'. save the datasource. It becomes Realtime. Replicate the datasource.
Hope this helps.
Thanks,
Praneeth.

How can I change a Mixer filter in real-time? (11.5)

Hi all,
I'm currently coding (or trying to code) an interactive soundboard that users can play with in their software. They can turn inputs on and off, increase the volume, change the EQ, etc. The nice is, and I was really pleased to discover this, Director already has a feature called an 'Audio Mixer' that has filters to satisfy all these functionalities! The bad thing, I can't figure out how to change these filters in real time.
For example, here's the code to MUTE a specific mixer (activated when the user toggles a button):
member("channelOneMix").mute()
But how do I tell it go INTO that mixer, find the existing High Pass Filter, and change the value of that High Pass Filter's 'highCutOffFreq' property? It's a classic case of knowing exactly what I need to tell the code to do, but I have no idea of the SYNTAX of actually telling it to do that.
I hate to be 'that guy', but it is somewhat urgent. This is for a college assignment due Wednesday (yikes!). I didn't quite know what I was getting myself into with this code, but the end is in sight if I can figure out how to write this particular code.
Many gratuitous thanks in advance for any assistance!
PS: It won't be enough to simply add a new filter to the list. The user needs to be able to turn a dial up or down to increase or decrease the High Pass Filter, in conjunction with several other dials manipulating other filters. I need to be able to actually change what the filter's value is.

Thanks for your help!
The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
I don't if this post is comprehensive. I'm not sure.
Thanks for your time!
Jordi

Recording with audio playback slowed down 65% what speed do I need to speed the video back up to to get it into real time?

Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thanks

hey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting

How to change the default Real-Time Collaboration page?

Who can tell me how to change the default Real-Time Collaboration page?
If I want to add my corporation logo in the top of the default page.How to do?
Thanks!

Thanks for your help.
"Click the Sites tab to display all sites and their IDs for your system." But I clicked the sites tab ,it showed "http://hostname:7777/imtapp/app/home.uix". I could not find the siteID parameter from it. Why?
How to get it from command?

Real time job doesn't receive automatically changes in SAP ECC 6

Hi Experts,
 
 I'm trying to (using Data Integrator) automatically retrieve data from SAP ECC and store it in a local database table. I followed the steps written in this article: http://wiki.sdn.sap.com/wiki/display/BOBJ/Receiving+IDOCs. I'm modifying some records in the Cost Center Master Data (CSKS) and using COSMAS01 as the IDOC in which I'm trying to send the information.
 
 All seems to be OK, since I manually sent a Cost Center data row using the /nbd16 transaction, SAP ECC displayed a message telling that an IDOC had been generated. Also, when I checked the IDOC status in BD87 it had status 03, meaning that it had been sent correctly.
 
 In Data Services when I clicked on 'View Data' in the local database table that I put in the dataflow I could see the rows that I manually sent from the ECC. However, after truncating the local table, it bothered me that when I tried to send manually a second IDOC with another row from the Cost Center Master Data table, my real-time job didn't receive the request and consequently didn't insert the desired rows. I didn't change anything in the configuration, so my first question to any of you is that if you know what could it be that causes my real-time job to not receive the request from ECC?. I tried making a third try, but at my company they had to shut down the ECC server, so it's going to be a while before I make another try.
 
 Now, the REAL question of this post is that after I sent the first IDOC successfully (and before sending manually the second one mentioned earlier), I changed a record in the CSKS table directly in the ECC, hoping that it would automatically generate an COSMAS01 IDOC and send all the data in the table to the Data Integrator. This didn't happen and no IDOC was generated, so do any of you know why the automatic change didn't trigger the sending of the IDOC with the data?
 
 As I said before, I made the configuration in ECC and DI following the steps in the link written at the start of the post, and it was tested OK by successfully sending a COSMAS01 IDOC once, manually using bd16.
 
 In advance I thank you all for your cooperation. This is my first thread in the SDN forum so also please excuse any mistakes in my english.
 
 Best regards...

You do not need to schedule this job every 10 min. Why?
If we can't schedule this job every 10 mints how can I able to retrive the delta records into Queue(RSA7)
What is your advice I mean how to schedule in order to get the delta?
Thanks

Changes to Real-time cube through input-field entry

Hello,
I have created query on Real-time cube (which has some data ) and enabled input-entry field for one of the key figures.
2).Created a "Push-button" to save the changes made in query.
Issue : changes are not saved at cube level , when i press "Push" button.
For Push button Properties, I used "Planning -specific Command" --> "Save"
Pls. let me know possible reasons and solution to the problem.
Thanks
CP

Hi,
Check at first that you dont have a lock data issue (TCODE SM12).
If you are using WAD or Query Analyzer, please double check the following:
1) Your input-ready query must be created based on the aggregation level but not direct to the real-time infocube.
2) In the Query Analyzer look into the query properties and check that Change Mode is marked on and the key figure properties on the PLANNING tabstrip check that you have at least one method for ready-input.
3) In WAD Data Provider is linked to your input-ready query.
4) Check your Analyzer web item looking for data binding to Data Provider just mentioned.
5) Add a couple of push-buttons with SAVE_DATA command and RESET_DATA also.
Please check step by step and try again.
Hope this helps.

How to Create an Epic Rap Battle of History in After Effects (Compositing, VFX, Green Screen, Audio), or Fix Audio, Speed, and Real Time Problems

Hello. As a film project, I am creating an "Epic Rap Battle of History", a parody video of a popular series on YouTube. In my film/video, I would like to use compositing so that there will be two of one character in one shot. I have used Premiere Pro CC for the main character sequences, but when I imported this project in After Effects, there was no audio at all from the song, and the canvas displaying the composition was moving very slowly, at about 50% of the video's actual speed. Also, in the top right corner, it says, "Not Real Time", and displays something like 7.39/29.96. I have looked at different web pages, and nothing seems to work.
I would appreciate it if someone could explain how to fix this all up for me, or especially if someone who has had experience creating an Epic Rap Battle could actually list a step-by-step process on how to create one.
If this helps, I am a beginner to Adobe, and work on a iMac tower. Thank you for your feedback.

Start here to learn After Effects: http://adobe.ly/AE_basics

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

Log for Change of Real-Time Load Behavior

Hi experts,
is there a log for the change of the real-time load behavior?
I checked SLG1, but I did not find any object / subobject that seemed to be helpful.
Angie

Firstly,
How are you changing the real-time load behavior, are you using any process chain variant,in that case you can look at the process chain log..

NI-DAQmx 7.4 Changes for LabVIEW Real-Time

Hello LabVIEW Real-Time and DAQmx users,
National Instruments has recently released NI-DAQmx 7.4. Changes introduced in NI-DAQmx 7.4 provide increased flexibility when performing hardware-timed single-point operations on real-time platforms. The Developer Zone Tutorial: DAQmx Hardware-Timed Single Point Lateness Checking has been created to help explain these changes. Information is also available in the NI-DAQmx Help.
In order to provide these changes in NI-DAQmx 7.4, the behavior of 'DAQmx Is Read or Write Late.vi', used in previous versions, had to be changed. In NI-DAQmx 7.4, the 'DAQmx Is Read or Write Late.vi' has been obsoleted and no longer performs any lateness checking. Applications being upgraded to NI-DAQmx 7.4 are recommended to use one of the lateness checking options discussed in the above tutorial.
Regards,
JR Andrews
NI

Hello,
I changed the program and added a case structure to configure each channel according their type. In order to go through all the channels in the configuration file, I put a for structure.
It seems it is working, however, when I start acquisition, I only see one channel and that is last one which is configure.
Here is the original file, configures all, but only works for AI Voltage:
Here is the modified one:
What I am doing wrong?
Thanks!
Attachments:
ConfigureFor Channels.PNG ‏131 KB

Real Time Module needed for hi speed digitizer PCI 5911 ?

Rookie question :
I run LV 7.1 , LV Run Time 8 ( whatever this Run Time Engine may be ) , MAX 4.0.0 , NiDaq 8 ( for my two Multi Function PCI Daq's ).
Question : does the PCI 5911 work under NI-Scope 3.3 ( supporting PCI 5911 ) without a Real Time Module ?
i.e. is the Real Time Module a separate ( hardware ? ) device, not necessarily needed for PCI 5911 ?
Sorry for this utter basic question.
I have not used a hi speed digitizer before, only multifunction NiDaq's.
Thanks for any help or reference.

You are probably referring to the LabVIEW Real-Time Module described here.
This is an extension to LabVIEW that allows you to run VIs on a
real-time, deterministic environment, usually on remote hardware. One
common configuration is to use a Windows system as your host, and
communicate to a remote PXI controller running LabVIEW RT.
The PCI-5911 is fully supported for "standard" LabVIEW running on Windows. You don't need LabVIEW RT to use it.
In fact, the PCI-5911 is not supported under LabVIEW RT.
Message Edited by psisterhen on 10-16-2007 09:50 AM

Changing time scale for mixed signal graph

I want to change time scale for mixed signal graph 1 day or 5 day of realities?

And what exactly are you having problems with? If you want to use a property node, it's Xscale.Maximum.

Real time speed change mixing

Similar Messages

Maybe you are looking for