Realignment showing multilevel error propagation carried out and

While executing realignment table it is showing  following :-
Realignment showing multilevel error propagation carried out
Realignment of live cache time series aborted
Have seen all consistency checks and everything is fine no alerts received.
Please suggest
vikas

Hi Vikas,
I am assuming that you have maintained the Realignment table properly meaning you have only the necessary entries and removed all unwanted entries. Having assumed that the other reason why this error can come up is when you try to realign more than 1 Characteristic Value in the same table entry.
For Example.
Let us you have 3 Characterstics viz, product, location,customer.
If for Product P1, you are trying to change the location from L1 to L2 and customer from C1 to C2 then there is a possibility such an error might occure.
In such cases we need to create 2 entries as follows
1) P1 L1 C1 to P1 L2 C1
2) P1 L2 C1 to P1 L2 C2.
It is better to avoid Multiple characteristic changes in a single step.
Hope this helps.
Thanks
Mani

Similar Messages

  • CIF error-Multi-level error propagation carried out

    Dear ALL,
        When i am trying activate the integration model for Material transfer it generates queue with status SYSFAIL with message "Multi-level error propagation carried out".
    and the integration model is not activated.
      please help
    regards
    Kiran

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Multi-level error propagation carried out Error in APO

    Dear Experts,
    We had developed a custom program that is same as /sapapo/rrp3 report, but the issue is when we use planning version other then 000 the custom program is giving the error ""Multi-level error propagation carried out"" but the RRP3 report works fine with all the planning versions.
    Please help to find the cause and to solve the issue.
    Thanks.
    Regards
    Abhinav Nallani.

    Dear Arek,
          The problem is not yet resolved . we have raised an OSS note for the same.
    as the relevant notes are already implemented in our case.
    regards
    Kiran

  • Error "Multi-level error propagation carried out" when I run a report

    Hi All,
    When I run the report /SAPAPO/CDPS_REPT - Order and Resource Reporting with the below criteria I getting error "Multi-level error propagation carried out"
    Planning Version - Simulation Version XXX
    Evaluation Start - 05/03/2011
    Evaluation End - 12/31/2013
    Evaluation List - Extended Operation List
    I do not get error when I run the report with selection as Active version 000 and Evaluation List as Order List, Operation List.
    I have tried by ruuning Live cache consistancy check, but the issue is not fixed
    Please help me to resolve this issue
    Thanks & Regards,
    Rajkumar

    Hi Jack,
    Please do post the server log file here so that we can try and find a solution for the problem you are facing.
    I had a problem a while ago with the app server too. While trying to run an application, after a few times, it would give me an error message saying the Application Server cannot be started. I rebooted my machine and thankfully it worked again. Just try this too and see if it works.
    If it doesnt we can go through the server log and try to identify the cause of the problem.
    Cheers :-)

  • "Multi-level error propagation carried out" in SCM 5.0

    When I use the SNP PPM Generation With Lot Size Margin function in SCM 5.0, I got the following error:
    Multi-level error propagation carried out
    Message no. /SAPAPO/OM242
    Could you please give me this help?
    Thanks,
    Lian

    Hi,
    Thank you for the information, but the problem is still there though I de-activated all user-exits...
    I also saw the following error:
    Invalid planning version
    Message no. /SAPAPO/OM015
    Thanks,
    Lian

  • The sandbox of Unified Contact Center Enterprise always shows the error "Finesse is out of service."

    Hi guys,
    I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
    Does anyone meet the issue?
    William

    Hi DeveloperMax,
    According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
    As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
    only in 32-bit versions, so the job failed.
    To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
    select “32 bit runtime” in the Advanced tab.
    Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.

    Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.

    Hey dylanburks12,
    It sounds like you are seeing issues when attempting to sync videos to your iPod. I have an article that will help explain some possible situations regarding this issue:
    iTunes: Videos may be unable to sync to iPhone, iPad, or iPod - Apple Support
    http://support.apple.com/en-us/ts1497
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • My Apple TV gen 3 has stopped downloading Netflix shows. I have logged out and in from Netflix. All of my other Apple products work fine with Netflix.

    My Apple TV gen 3 has stopped downloading shows from Netflix. All I get is an error message. I have logged out and back into Netflix. All of my other Apple products work well with Netflix.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • I have recently Re-imaged my 24intel 2Gb Ram Leopard, after carrying out and checkign the time machine Backup., I have recently Re-imaged my 24intel 2Gb Ram Leopard, after carrying out and checkign the time machine Backup.

    I have been having issues with the iMac and so decided to Erase/Install from scratch after first carrying out a Time Machine backup (which I checked had worked)
    Once installed I tried to mount the USB drive and it didn't show.
    I checked all the usual features and Preferences but finally cheked Disc Utility.
    Disc Utility showed me the onboard drive with the Sectors/Partitions whilst the External WD Drive USB showed only as a single line with no sectors/partitions.
    After rebooting a few times the drive mounted once and I got 90gb of data off it but then it failed again never to return since.
    I still keep on getting the 'Virtual Drive' for backup software mounting every time though so it appears that the physical drive is ok.
    Any ideas on getting it to mount or getting my data back??

    I have been having issues with the iMac and so decided to Erase/Install from scratch after first carrying out a Time Machine backup (which I checked had worked)
    Once installed I tried to mount the USB drive and it didn't show.
    I checked all the usual features and Preferences but finally cheked Disc Utility.
    Disc Utility showed me the onboard drive with the Sectors/Partitions whilst the External WD Drive USB showed only as a single line with no sectors/partitions.
    After rebooting a few times the drive mounted once and I got 90gb of data off it but then it failed again never to return since.
    I still keep on getting the 'Virtual Drive' for backup software mounting every time though so it appears that the physical drive is ok.
    Any ideas on getting it to mount or getting my data back??

  • ITunes on win 8 shows unknown error -42110 on startup and video-audio don't sync

    I tried updating and unistalling and reinstalling itunes on windows 8 and also deleting the Application data files.  Still get unknown error -42110 on every startup.
    Don't know if it's related but on every movie the audio and ideo drift badly out of sync.
    Apple support have just wasted my time on this.

    If your iTunes is up to date, remove the SC Info folder.

  • HT1414 an error 1015 popped out and it stopped restoring my iphone 3g. Please help

    error 1015 stopped restoring iphone 3g. Please help find solution here

    This most often means  that you previously hacked your phone to downgrade the iOS or jailbreak, and the modem baseband (firmware) was altered.  In that case, SOL - there is no way to restore or update to a stock iOS again. 
    There are some "alternative" methods that will get the phone out of recovery mode and usable again, but it will remain in a hacked and unstable state.  Google to find these. 
    "Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state."

  • Multi-level error propagation during the execution of CFM2 transaction

    Hi,
    We are implementing SAP SCM 5.0 integrated to SAP R/3 Mills IS.
    During the execution of CFM2  transaction, while  trying to activate the integration model for the object u201COrdersu201D for the very first time, the following error message appears:
    *"Multi-level error propagation carried out".*
    There are also messages related to inbound queues blocked. In the case of maintenance orders, CIF_MNT_INBOUND message shows up. While working with Production orders, CIF_ORDER_INBOUND message emerges.
    The items listed below should be taken into account:
    -The production orders that are meant to be transferred to APO are regular production orders corresponding to several products.
    -We are working with configurable materials.
    -We are working with the active model (000) and for each plant we are using 2 different planning versions.
    Regards,
    Analía Nahmías

    Dear Analía,
    The corresponding error messages issued when executing //CCR indiacted the peg-ids are missing in liveCache.
    Recommendations:                                                      
    -Run transaction /SAPAPO/OM17 to check the internal consistency between database and liveCache within SCM system. Correct the inconsistencies                                                       
    -Execute report /sapapo/cif_deltareport3 to correct the inconsistencies between ECC and SCM system                            
    Regards,
    Tibor

  • HT201210 ITUNE IS SHOWING AN ERROR WHILE RESTORING AND UPDATING MY IPHONE 3G 8GB

    Itune is showing n error while restoring and updating my iphone please tell me now what to do

    usama1133 wrote:
    Itune is showing n error...
    And this ERROR would be...?

  • Document Cancellation can not be carried Out

    Dear SAP experts,..
    I met a problem when carry a document cancellation..
    We had a material which incidentally exist without batch management and so, the material don't have batch number and so its Shelf Life Expiration Date.
    The material was used as usual. (Used for production process by Goods Issue for Production Order)..
    The condition keep going for about 3 weeks until the end user had a mistake with her data entry and so the document must be cancelled.
    The cancellation can't be carried out, and the message shows "Enter Shelf Life Expiration Date".
    My Question :
    - Why was Goods Issue transaction could be carried out without SLED and the cancellation must be carried out with SLED ..??
    - What is the best action to solve this problem...
    Regards,
    Hachi

    Dear,
    Are you getting message 12019?
    Have you maintained the SLED in Plant storage view 1 in material master?
    Set customizing so that it is not necessary to enter such a date for the used movement types. Maintain the data by using Transaction SM30 in View V_156_MHD.
    Or
    Deactivate using Customizing
    Customizing via the following path:
    Materials Management --> Inventory Management/Physical Inventory  --> Goods Receipt --> Set expiration date check.
    You should  deactivate the check for the used movement types,
    Regards,
    R.Brahmankar

  • System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

    Hi Experts,
    We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
    I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
    Also, I checked the SAP Note : 858671 and 1094948.
    As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
    Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
    Thank you everyone for further assistances
    With Best Regards,
    Molly

    Hi Molly ,
    A per my experience and and observation. Message_type_x issue will occur in two scenarios.
    1) When ever Sytesm copy happend.
    2) Triggering of info package twice at a same time.
    Case1:
    When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
    Thsi can be resolved by reinitilization of source request.
    Note: Make sure that Init reqiuest is same in both Source and Target systems.
    Case 2:
    Message_type_x  May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
    With respect to the following blog:
    Kindly check the request in RSMDATASTATE.
    1) Request SID for which all requests are technically o.k.
    2) Request SID for which all requests checked for quality.
    3) Request SID, up to which aggregates are to be rolled up.
    Best Regards,
    Maruthi

Maybe you are looking for

  • Why no feature to organize my many mail accounts in the sidebar?

    I have many email accounts in my sidebar of Thunderbird. They are listed from top to bottom according to when I added them on the account settings. But, once they are added, there is no way to organize them from top to bottom. The only way is to dele

  • Populate the URL for popupURL from a Table/Page Item?

    Dear all, Would someone please tell me if the URL to run a BIP report can be populated from a table/page item when using popupURL and if so, how? Background: I have a Table called TBL_LETTERS with a varchar2 column REPORT_URL I have a Page (Pg 303) w

  • Weird Excel File appearing on my desktop

    Hey guys, twice now this week an excel file appears on my desktop. This is what it looks like: It won't open in MS Excel. When I tried to trash it, I get the following message: What is this? And how do I get rid of it? Thanks.

  • HOW TO TRANSFER FILE USING SOCKET

    HI.... My project is backup sever I want to take backup of any number of file and of any size please tell me solution how i can do this for this i done the zip file of backup. I done this but i face some problem... regards Ahire sharad

  • I am not able to use my facetime account on my I-Pod

    i am not able to use my facetime account on my I-Pod