Realisticly:how much OC with my system?MSI GNB MAX

Ok, How much OC I can get, with my system, if I change the 1.5ghz 266DDR Value RAM to something better. Any suggestions.
I plan to ditch the ram for something better, but my mobo, and CPU aren't that fast compared to the C, and E, and the 64 stuff.
I am using the 2.8B, E7205/i7205 mobo.
Only fan cooling. Using the pipe101, will place the tornado on it. Does the vantec fan card improves my GF performance.
I am just able to OC my card from 350 to 388mhz, 1.09ghz, others got a 420mhz on a supperior system. All using the inno3d 6800gt.. Or I'm looking at an "old" system already.
The OC FSB is just up to 153. I read somewhere that it is useless/not worth to OC this system.
So what do you think?
my system is in the signature

I would not push further than 160 FSB, you can corrupt your disks since PCI /AGP are not locked. Usually PCI frequency above 38 MHZ is not considered safe and 150 FSB corresponds to 37.5 MHZ PCI frequency. I corrupted my 30 GB WD at 160 FSB.
I have GNB Max, P4 3.06HT, 2x 512MB KVR DDR333 (CAS2.5 rated). I oveclocked the system to 150 FSB, P4 is running as 3.45GHz@600FSB (HT is on), with dual channel DDR300 memory (2-3-3-6 timings). System is 100% stable after testing with Linux kernel compile, Prime 95, 3DMark benchmarks. The performance gain in CPU intensive benchmarks is almost the same as increase in FSB frequency, which is 12.5%, since RAM overclocks in sync with CPU.
If you settle at 150 FSB, your DDR266 will be running as DDR300. You can test it with its given SPD values and if not stable you can reduce CAS setting one step, i.e. from CAS2.5 to CAS3. If none of these are possible, you can upgrade with DDR400.
I use Vantec Fan card with my GF4, but it did not help me increase my overclock. However, I removed the fan on my GF4 (heat sink is not removed just the fan) after trying to increase the overclock. Vantec Fan card is much more silent compared to the Thermaltake fan and copper heat sink combo. I still can overclock as before but do not need to put up with the noise of Thermaltake fan.
Hope this helps
My Config:
MSI GNB Max FISR
P4 3.06 HT (SL6PG) (oc 3.45@600)
2X KVR DDR333 CAS2.5 (running as DDR300 2-3-3-6 timings)
Compro Personal Cinema GF4-Ti4200 64MB (oc 285/570)
SB Live!
DLink 802.11b wireless PCI
Seagate 80GB EIDE (Windows XP SP2)
WD 30GB EIDE (Slackware Linux current)
NEC 4X DVDR/RW
Sony 16X DVDROM
etc

Similar Messages

MOVED: I have problems with grafick motherboards MSI 845G max when i play games

This topic has been moved to Intel P4 & Celeron P4 based board.
I have problems with grafick motherboards MSI 845G max when i play games

There diff x4 agp and x8 agp.......... nothing!!!!!!!
Check you have INTEL application accelerator installed!!!!!!!
845GE-Max is very fast mainboard, only the single channel mem make's it slower than 865/875 chipset........ fact
Check ALL drivers are COMPAT with system NOT the latest............. Try older drivers
Del

MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help

Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.

Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....

How much RAM should my system utilise?

Hello,
Sounds like an odd question and maybe it is, so apologies i am utterly Newbie here.
I am running a i7 5930 with 64 gig's of DDR4, typically i am using 70% CPU but the RAM is seldom reaching over 30% usage? Is this odd, am i not applying the software setting correctly?
Any advise is very welcome
Simon Brumby

I've been searching for and reading web pages and white papers put out by Adobe all afternoon and can't find anything suggesting that large amounts of RAM specifically benefits Premiere users.
System requirements | Adobe Premiere Pro
4 GB of RAM (8 GB recommended)
How much Ram do I need? (getting a new laptop, help me please!)
Todd Kopriva, Adobe staff, says "16GB is plenty" for Premiere.
http://www.adobe.com/content/dam/Adobe/en/products/aftereffects/cc/pdfs/Configuring_Your_S ystem_20140312.pdf
It reads: "If you plan to use Adobe Premiere Pro, 4 or 6 GB of RAM is minimum, while 8 or 12 GB is suggested for most users. SpeedGrade is the least RAM-dependent of the applications discussed here; 4GB is the minimum recommended amount, with 8 GB preferred. Although Photoshop’s Minimum System Requirements states only 1 GB is needed, you should consider allocating 4 GB, with 8 GB allowing you to work on very large documents. Remember that each of these numbers are for the software running alone (along with the operating system); add at least their minimum requirements together if you plan on having them open at the same time."
From what I can gather, Premiere performance is dependent on processor speed, storage speed, and GPU mainly - RAM is not a major player as long as you have "enough" - adding a bunch more does not speed things up any more. The OP was not asking how to build a system, or if he should upgrade RAM, just wanted to know why Premiere was not using all the RAM he has installed. I think the answer is that the software architecture is not written to utilize RAM beyond a certain point. Maybe this is incorrect, then please show me the specs from Adobe.
I agree that more RAM never hurts - certainly will help if running multiple Adobe apps (or other software) at the same time, as I often do. I mentioned this in my first post, did not say 16GB was total anyone ever needs. After Effects can use gobs of memory!
Thanks
Jeff

How to work with file system in linux within a JSF app?

I use this line in my backing bean to log some events:
FileHandler fhxml = new FileHandler("../webapps/MyWebApp/Log/MyWebAppLog.xml", append);
fhxml.setFormatter(new XMLFormatter());That works fine in windows but when I deploy it in my Tomcat 6 in linux It doesn't work. How can I work with file system in linux?

You should never use relative paths to access the filesystem. The path would be relative to the current working directory which is not per se the same in all environments. To convert a relative web path to an absolute file system path, you need ServletContext#getRealPath(). Use this absolute file system path in the java.io stuff. In a JSF application on top of Servlet API you can get the underlying ServletContext by ExternalContext#getContext().
Alternatively, if the file is located in one of the default paths of the classpath or if its path is added to the classpath, you can also just use ExternalContext#getResource() or even #getResourceAsStream() using just the file name.

How to integrate with RMS system

Hi experts,
I want to integrate RMS(Retail Management System) with SAP PI system.
Is it possible to integrate?
If possible, Can you give me Idea How to integrate with this?
Thanks & Regards,
Poonam.

> Want your more help. If I want to use SOAP adapter to integrate with RMS system.
> So, what are the prerequisites are required in RMS system to be integrate with SAP PI through SOAP adapter?
>
Fist you have to make sure that RMS system showuld accept SOAP messages, that means u will send payload to RMS in the form of SOAP meesage using SOAP receriver Adapter.
RMS system people have to provide URL , u will send data to address specified in URL.
using Adapter is compmetely depend on Source or Taget system, betetr to talk with RMS system people like how they will take data from other systems,besed on that you can decided.
Regards,
Raj

Can I upgrade to CS6 for how much and with fresh independent files.

I ordered Adobe Creative Suite 4 Web Premium a long time ago (I have the order number). I was wondering if I can get a download for CS6 and have a license to use on 2 computers.
I need to know how I can update to CS6 for how much and if I can get fresh files and not rely on old ones.

http://www.adobe.com/products/creativesuite/design-web-premium/buying-guide-upgrades.html
Mylenium

I have problems with grafick motherboards MSI 845G max when i play games

I ask about apology my English not so good but I try toexplains my problem
I bought about year ago this motherboard .:::: MSI 845G Max .::::..
and i have at home this grafick card
asus Geforce fx 5700 li 128mb
The problem is .............
the picture intermixes when i play this games
fifa 2005, need for speed, pro evulation ................ and many from the games decaying with high grafick
I asked many persons and the sa that the motherboard grafick AGP plats is 4x
Hill of the games needs strength follows mother boards with 8x AGP
I uppdated my mother board in this page http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=314&kind=1
to verion 1,6
But the update harbored is to old ::::::::: 2002::::::::::!!!!!!!!!!!!!!!!
Version 1.6 Update date 2002 - 12 - 17
I desire that you lice my problem with kind greeting of grateful with the respect and the estimate

There diff x4 agp and x8 agp.......... nothing!!!!!!!
Check you have INTEL application accelerator installed!!!!!!!
845GE-Max is very fast mainboard, only the single channel mem make's it slower than 865/875 chipset........ fact
Check ALL drivers are COMPAT with system NOT the latest............. Try older drivers
Del

How to communicate with different system on different network using WCF service

Hi,
I am using a WCF service that is accessed by different systems on same network. But systems on different networks are not able to access my WCF service. I have enabled tcp port also. But i can not resolve this issue. Please give the solution to the issue.
Regards,
Shanmugam M

Hi Vilas,
How you may communicate with you AIX server may very greatly depending on what is running on your server. Here is a link to another thread where Java calls and AppletView were discussed. It contains a link to the company that makes AppletView, so it may have some good information for you.
Also, if your customer suggested you use AppletView and they developed it, they would probably be your best bet for explaining it to you.
Hope this helps!
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

How to reconnect with previous system files

I recently had to reset my G4 and am now recovering my archived files. I'm at a loss for iPhoto(6), I reovered all my old files and I guess I have to re-import in to the library. The issue is that there are so many folders that I don't know what to import...orginals, modified, data.....????? Is there a "magic solution" that just reconnects the whole thing? I guess I could just re-import the "orginals" file but should I then rename it first? And should I then get rid of all the other "old" files first? This would be my least preferred option, as it would mean to re-adjust 3000+ pictures. Any help greatly appreciated! Frederic
Powerbook G4 and iMac 20inch dual core Mac OS X (10.4.9)

frederic
Have a look inside your iPhoto Library Folder. Is there a file in there called library6.iphoto? If so then you do not need to import anything. Simply hold down the option (or alt) key and launch iPhoto, then choose 'Locate' and from there navigate to the library6.iphoto file. This should open your library.
If 1) You do not have this file or 2) it will not open, then you will need to create a new library and populate it.
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

How much impact with 4G RAM?

I bought the base model 13" MBP (with 2G RAM). My use is pretty plain vanilla (Web, email, iPhoto, MS Office, Skype, etc) with no heavy video or gaming. What's the general view of the value of going to 4G? And if yes, what about doing it myself? What does Apple charge to do it?
Thanks,
Picman

I agree that for many users, 2 gig of RAM is plenty. For those of us who run Windows 7 in a VMware Fusion partition and want to leave it open while we are running OS X programs, though, more RAM is better. I just upgraded my MBP from 2 to 6 gig with modules I bought from OWC, Macsales. Now I can have Safari, Mail, iCal and Windows 7 in a Fusion virtual machine running simultaneously with no noticeable slowing down of any processes. I have assigned 3 gig of the RAM and one of the two processors to Fusion and Windows 7 is performing far better now than it ever did when I had only 1 gig of RAM for it. The total cost of the OWC modules was $189.99.

How are people with older systems supposed to enjoy ITunes?

I have Windows ME, yes I need a new PC but can't now. Is there an ITunes that works for ME, or will there be one????

No. Not the answer you wanted hear, but that's it.

How much RAM can my Macbook Pro hold MAX?

Can my Macbook Pro hold a MAX of 8GB or is it just 4GB? I'm getting different answers online and I'm a little annoyed at this point. My computer specs currently are:
15 inch Laptop
MacBook Pro 2.6 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM.
Got my computer in 2009.
At Crucial.com it says it can hold up to 8GB when I select my computer processor speed from their list, but I noticed it saying DDR3 (and I don't know what that means to be honest). Here's the link:
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=7F3A5584A5CA7304
To the best of my knowledge I selected the correct computer, which I own, from their list.
Under "About This Mac", on my computer, it says DDR2 for the memory, on Crucial.com it says DDR3. As a result I'm confused and will that cause problems?
I'll be getting my RAM kit from Crucial.com, so do I buy the 4BG kit, because that's all my laptop can handle, or is it OK to get the 8GB kit, which says DDR3?
I do a lot of video and audio, so I would like to get my RAM up to 8 GB if it will.
Thanks

One more question friend....You've been so helpful
Will these two sticks work together on my machine?
2GB, 200-pin SODIMM, DDR2 PC2-5300 memory module
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=B54C51B4A5CA7304
along with a...
4GB 200-pin SODIMM DDR2 PC2-6400 Memory Module
http://www.amazon.com/Crucial-CT51264AC800-200-pin-SODIMM-PC2-6400/dp/B001RB21JE
So these two would add up to 6GB total. Now the ONLY DIFFERENCE that I see is the 2GB stick is PC2-5300(667Mhz)speed and the 4GB stick is PC2-6400(800Mhz)speed. I understand that my machine won't run at the 800Mhz speed that the PC2-6400 stick is designed for, cause my machine says 667 under the memory info. From what I read online, it's ok to put a higher Mhz stick in there, it will just cap at 667Mhz speed? But.......both sticks are DDR2, which is right for my computer, but will the 667 MHz with a 800 Mhz be a huge no-no to run together? At this point I think that is my main concern! If I can't do this, than I think I'll have to go with the 2x2GB kit for 4GB total, but I REALLY would like to run 6GB.
Shew.... :P
Thanks again!

MSI GNB Max and P4 3.06 with 56C Idle (Bios)

is that ok or to high, i know about some bugs with the Temp Sensor so there are my 2 cents ! :D
Please give me some feedback thx. !

I had the exact same problem. I bought a Cooler Master IHC-H71 CPU cooler and it brought me down to 40-44 at idle. Ordered it from http://www.phamcomputer.com

Anybody have ANY ideas? MSI GNB MAX FISR

Does anybody have any knowledge of when MSI's next updated BIOS will be with the AGP/PCI frequancy selector and AGP/PCI Lock will be bought out? I look forward with anticipation! Anybody have release dates atall?

aint that just stupid?,
would it cost them more to make it with agppci lock?
If it was with that i would have bought it 8)

Realisticly:how much OC with my system?MSI GNB MAX

Similar Messages

Maybe you are looking for