Reallly Really Annoying,- Please some one help! ?

Hey well basicly ive got the curve 8900 and regularly when i go to play music its showing headphones plugged in so i have to click the blackberry button and switch it to handset, But the worst thing is when i get a call its doing the same thing by the looks its switchin from headset, speaker and handset therefore i cannot hear my phone call this is really annoying please can some one help.
Regards,
James,

Unless you haven't already done so... reload the device with latest software from your carriers site, look for funky apps you may have installed (sound/music/games), and then call your carrier for support - it should have a 1 years warranty where they ship you a new one!
peace and love

Similar Messages

  • HT5085 Please some one help me! i bought a album 24hours ago and it douwnloaded bout doe not play. i'm trying to re-douwnload it but doesnt want to do any thing. please help??

    hi, could some one please help me? i bought a album 24hours ago and it does not play. so i deleted it and tryed to download it again, but it says its already downloaded. what can i do? PLEASE HELP?!

    Make sure you delete all the tracks from within iTunes itself, not just the track files. Once you remove the tracks from iTunes' library listing, then you should be able to download the tracks again from your Purchases list.
    Regards.

  • I really need help so today morning ithis notifacation pop up saying i could use the ios 6 so i press allow after my ipod keep on showing the apple over and over so please some one help thanks.

    some please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Why when I store a number to my iphone 5 don't it show up in my contacts , but will show the name on my call list , please some one help as it's driving me nuts

    Can any one please help me as I can't find numbers I store to my contact unless I go throu my call history or text messages

    What no one can help me seriously

  • Photo files willnot show in iT for my iPod.........Please some one help me!

    When I load the photos from the file or files i want from my computer, it will not display the file or files on the iTunes work area for my iPod. so i can arange my photos, but it dose load it in to my iPod. When I sync the file it says "up dateing iPod do not unplug" when it is done it will say complete and there will be photos on my iPod but no display on the computer of the files.
    Thanks
    WT

    If the folder you are syncing from has sub folders they will show in the box. This allows you to use the selected folders option and choose one or more of the sub folders. For example you may choose to sync from My Pictures and inside My Pictures you have folders for different subjects. You can then choose which of those subject folders you want to update to the iPod or you might want to make a folder in there especially for iPod photos. You can drag these folders into an order of your choice.

  • I have ipad2 it using wifi 3g how can i use my iphone4 network to browse on it please some one help

    i have ipad2 that have wifi+3g , and i want to use my iphone 4 net work to use the ipad wifi please how can i download it so that i can use the iphone 4 network on the ipad

    You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
    You can read about how it works here.
    iOS: Understanding Personal Hotspot - Support - Apple

  • I just got my ipod and i have networks but it wont let me make a password i have tried to find my wi-fi password but i can't is there an app where i can get wi-fi off of it please some one help me i can't do anything on my ipod

    i just got a ipod and i can't find my wi-fi password im so mad i have alot of networks but it wont let me make a password and i have tried to find my wi-fi password is there an app or something that can help me get wi-fi on my ipod i feel so sad knowing that i cant even do anything with it

    You need to contact the people who administer the networks to get the passwords for the networks. If there was such an app as you are asking for then passwords for wifi networks would be worthless.

  • Report Scripts - Please Can Some One Help Me

    Hello Gurus,
    Is it possible to display 2 members of the same dimension in adjacent columns using Report Scripts? if not what is the best available option?
    Consider this Sample Outline
    +Product
    +-Cofee
    +---Cafined
    +-------1100
    +-------1200
    +---Decafined
    +-------1300
    +-------1400
    +-Soda
    +---Coke
    +-------1500
    The format of the desired report is
    ======= Jan Feb Mar
    1100 Cofee 8 8 8
    1200 Cofee 8 8 8
    1300 Cofee 7 7 7
    1400 Cofee 7 7 7
    1500 Soda 6 6 6
    ================
    Please Can some one help me in this regard!
    Thanks In Advance

    If I remember correctly when I wanted to do something similar I imported the report with the level 0 members into SQL Server and then joined on a mapping table (was a parent/child table in our case) to get the other column. In our situation we already had the mapping table readily available because this is where the dimension was built from!

  • HT1338 i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created.

    i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.

    You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
    Hope that helps.

  • Please does anyone knows how to delete the "others" on the iphone becuase it take me a lot of spaace and i cant have anything i have 5 GB of othres coan some one help me please?

    please does anyone knows how to delete the "others" on the iphone becuase it take me a lot of spaace and i cant have anything i have 5 GB of othres coan some one help me please?

    If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup.

  • Please some one can help me to fix the special char issue

    Hello,
    Please some one can help me to resolve the issue.
    I was try to load data from PSA to DSO,where it was got failed.
    error message is saying that "Value 'Blythewood' (hex. '0042006C00790074006800650077006F006F0064') of characteristic ZSHPTOCIT contains invalid characters".
    Please advise me to resolve the issue.

    Hi Aryan,
    Change your info-object ZSHPTOCIT to accept Lower Case Letters(it is in General tab of the Info-object definition screen. Check the Lower Case Letters Box) and then load the data. I dont know why you are using the info-object but you may want to check what "Blythewood" means to business users. If it makes sense to them then its fine or esle ask the R/3 team to correct the data.
    Regards,
    Nikhil

  • My i phone 4 got locked by my small sister plus my laptop was formatted i dont have itunes back up to unlock thei phone what should i do i am puzzeled?? i tried passcode it says i phone is disabled .. some one help please

    My i phone 4 got locked by my small sister plus my laptop was formatted i dont have itunes back up to unlock thei phone what should i do i am puzzeled?? i tried passcode it says i phone is disabled .. some one help please

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414  ( https://discussions.apple.com/message/20025416 - "A restore erases the iPod. If you restore from backup the iPod will be like it was IF the iTunes library includeds [sic] all the synced media like apps and music since those are not included in the backup.")
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
    If none of the above work, try:
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

    In the attempt of updating my ipod touch, i am  faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones  in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

    See if placing the iPod in Recovery mode will allow a restore via iTunes
    Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer to help determine if you have a computer or iPod problem.

  • HT201232 itunes will not recognise my device iphone 5s, pls can some one help???

    itunes will not recognise my device iphone 5s, pls can some one help???

    Hello Tantoh,
    Welcome to the Apple Support Communities!
    I understand that your iPhone is not being recognized by iTunes when you connect it. To help resolve this situation, please read over and work through the steps outlined in the attached article. 
    If you don't see your connected device in iTunes for Mac - Apple Support
    Have a great day,
    Joe

  • Please some one can explain about some complex queries

    BW Guru's,
    please some one can explain about some complex queries which was created while working on Reporting.
    I need to create profit and loss query as per requirment on the FL-Gl cube.
    Answer would be appreciate in advance.
    Regards
    Krish

    HI Aryan,
    No need to create FM on your own. You can copy the FM from Function Group RSAX.
    The procedure to create FM extractor is as follows:
    1) Create an extract structure.
    2) Go to SE80. Select Function Group RSAX , right click and then copy.
    3) Give your own name to the function group to copy.
    4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
    5)Specify the name of new FM you want to create.
    6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
    7) no need to change the import tab.
    8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
    9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
    I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
    Regards,
    Geetanjali

Maybe you are looking for

  • Download stops saying it is corrupt

    Hi, Im trying to install/download cs6 production premium I have my serial number, but in the original download it gets about 15 minutes into the download and stops saying something about corrupt. I then thought maybe I have to install the software th

  • Can you swap an SSD from a MacBook pro C2Duo to an MacBook pro unibody

    I have a very trusty 17" MacBook pro core 2 duo that's due for an upgrade. Is it possible to swap my current SSD from my MBP C2D to my new 17" MacBook pro unibody? Im thinking there might be a problem with drivers? It will save me a lot of hassle try

  • No signal in my Samsung tv when I use HDMI connector?

    Hi. I have a problem with the Hdmi connection to my iPad 3. It doesn't work in my Samsung tv, it says " there is not signal". I have tried it  in another one, same brand and it works. Does anyone know what the problem could be? Thanks Ladysnow

  • Very important information: No access, but Static IP set and port forwarded?

    Here is some important information I just learned, and I hope it will benefit the entire community. So, I have a WRT54G router, and I was trying to make a webserver. Everything should have been working fine, but I could not access it when I tried to

  • Reordering columns of two dimensional matrix

    Hello all, How to reorder the columns of a two dimensional matrix as per the conditions given below 1. The front panel should contain a string  control. when supplied a list of indices of column  in  the string control. The ordering of the columns sh