Reallocating telephone numbers between two BT line...
I have two BT lines coming into my house.
Let's call them A and B
Line A is currently used for both broadband and voice calls.
Line B is currently used for voice calls only.
The reason I have the broadband on line A is that line B can only provide a significantly lower broadband speed, although the lines are pairs from the same cable.
I would like to transpose the telephone numbers on the two lines, so that line A would become the number on line B and line B would become the number on line A
This would enable me to have calls and broadband on the number originally allocated to B, and calls only on the number allocated to Line A
I hope I have made that clear!
Can someone tell me if it's possible to do this, and if so what I need to do to get it done?
Hi Mac41
I have just sent you a private message, if you can send us an email using the contact us form in the private message we can take a look at this for you.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
Similar Messages
-
Swap phone numbers between two different accounts.
I currently have two phone plans and two phones. One is on my mother's account and the other is a new phone I just started on my Fiance's account. They are completely separate from each other. My mother has a plan she own's and my fiance has a plan she owns.
My question is; is it possible to swap numbers between the 2 phones? I want the number from my old phone that is on my mother's plan to be on my new phone that I just got. My mother plans on letting the other phone run out of contract and cancelling the line. I know I can swap the sim cards, but that would put my new phone on the wrong plan.Why didn't you perform an Assumption of Liability (AOL) to transfer your original line from your mother's account to your fiancé's account?
-
Can I switch phone numbers between two iPhones?
I have ordered a 3GS, replacing my wife's 2G model. She will now get my 3G model. Do we have to change phone numbers or is there a way to move my 3G number with the 3GS and vice versa. It would be much better if that was possible.
I also wish to switch phone numbers between phones. I just got off the phone with AT&T customer support. You can handle this over the phone. Need to have the two phones in hand at the time. I got through to customer support today with less than one minute on hold. I was quite surprised. AT&T must have really staffed up for the release.
-
Swapping Cell Phone Numbers Between Two Phones...
I hope someone can answer this question before I got ahead and order my iPhone 4 on the 10th.
Ok...right now I have my Incredible. I am adding the Family Share Plan in which I'm adding a second line to get the iPhone 4 for $299. My question is once I get the new iPhone 4 with the new number can I TRANSFER numbers where my original number I have NOW can be ported to the iPhone 4 and the NEW number goes back to the Incredible. Is that possible??? Thanks.Yes you can swap the numbers once you get it. You can do it online, via #228 or a call to Customer Service.
-
Swap numbers between two smartphones same account?
hi all I just upgraded to the htc m8 from the htc one, I need to move the old number to the new phone and the new number to the old phone, could you tell me the steps?
I'd be happy to review your options for processing this change jfaulk1111! Normally, you can make changes like this on My Verizon. However, in this case, it sounds like you're trying to trade phones between lines. You would need a Verizon Representative to process this change for you. You can call 1-800-922-0204, or you can Follow me on this message board, and I can get the details needed to help you complete everything.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Can we swap numbers between two activated phones
We added a line for my daughter but my husband wants the newer phone. Is there a way for him to keep his number on the new phone?
Yes you can. If the 2 phones use the same size SIM card, the easiest way would be to swap the cards between the 2 phones. You can also do so in the owners MyVerizon account. You can also call CS or stop by a Verizon store.
-
How to implement one to many relationship between two Document Line Table
Hi,
I want to implement the following relationship into user defined tables:
Example Situation:
There are tables A, B and C.
For one record of Table A, there could be multiple records in table B.
For one record of Table B, there could be multiple records in table C.
i.e. A(1) -> B(n) [One to many relationship]
B(1) -> C(n) [One to many relationship]
finally: A(1) -> B(n) -> C(n)
How can I achieve this? If I make Table A as Document and table B & C as Document Line and then make them UDO, will it work? Kindly suggest me a solution.
Regards,
Sudeshna.Hi,
I think that the database representation is exactly what you ask for. 3 tables, A, B, C. A should have a UDF that is linked to B table, and B should have a UDF that is linked to C table.
You should manage the database transactions, and the UI to support all this stuff.
Regards,
IBai Peñ -
I have just started using TB 31.4 and am planning to move contacts (about 1400 from Outlook) into the TB Address Book. Many of my contacts have multiple email addresses, more than five telephone numbers, and more than two street addresses.
In doing a small import test I noticed that TB only has space for five telephone numbers and two email addresses, two street addresses. Is there a way to add more so that I do not lose this data on the import?
Is there a way to rename telephone number fields (as almost no one has a pager anymore)?
Can you create a third street address location?
I understand the use of custom fields but that seems less than satisfactory method.There is an addon called 'MorefunctionsForAddressBook'. See link below.
* https://freeshell.de/~kaosmos/morecols-en.html
scroll down to the bottom to see the download link, which looks like this;
'''Download MoreFunctionsForAddressBook - 0.7.1 version (TB 3.0 or higher)'''
Download .xpi file to desktop or downloads file.
'''How to install addon:'''
In Thunderbird
* 'Tools' > 'Add-ons' OR 'Menu Icon' > 'Add-ons'
* Click on the gear wheel icon and select 'Install addon from file'
* locate the addon .xpi file you downloaded and click on 'Open'.
* Once installed it will appear in the list of Addon Extensions.
* You will need to restart Thunderbird.
This addon offers more fields etc and much more eg; importing etc. -
How to put separator in between the output lines
SELECT EMP_NO FROM EMPLOYEE
OUTPUT
0001
0002
0003
0004
0005How to have a dotted line or some separator in between two outpur lines ? (Like '----' between 0003 and 0004)
YogeshI want to have a dotted line after each EMP_NAMEThis?
SQL> var c number
SQL> exec :c := 1
PL/SQL procedure successfully completed.
SQL> select empno, ename
from (select rownum rn, to_char(empno) empno, ename from emp
union all
select level * :c + 1, '-----', '----------------'
from dual
connect by level <= (select count (*) / :c from emp)
order by 1, 2)
EMPNO ENAME
7369 SMITH
7499 ALLEN
7521 WARD
7566 JONES
7654 MARTIN
7698 BLAKE
7782 CLARK
7788 SCOTT
7839 KING
7844 TURNER
7876 ADAMS
7900 JAMES
7902 FORD
7934 MILLER
28 rows selected. -
Can I switch my phone number between two lines(not just between phones)?
I have 4 months left on my current plan. I would like to take advantage of current holiday sales to get the droid razr for cheap. I am considering adding an additional line to my plan to get the upgrade. The problem with this is that I either have to use the new number and let my other contract end or continue on with my current number and pay for 2 lines for the next 2 years. I noticed that verizon lets you switch the phone number that is associated with your line. Would I be able to add an additional line to my plan and then switch the numbers between these two lines? Essential line A has number A and ends in 4 months, line B has number B and ends in 20 months, and I want to make it so that line B has number A and then only pay for line A for the next 4 months. Is this possible?
Verizon does not allow you to switch numbers since they are tied to your contact. However, there's a work around, because Verizon does allow you to port a number from another carrier to overwrite the existing number without changing your contract. So here's what you need to do:
1. Get the Razr cheap like you wanted on a secondary line;
2. Wait for 4 months so your main line contract is up;
3. Port out your main line number to another carrier, for example, Pageplus;
4. Wait till your bill cycle is passed and port that number from Pageplus to Verizon, overwrite the number on secondary line.
After step 4 you will have your main number back on the line with the Razr. -
A few days ago I received a message saying I was the millionth visitor and had won a prize which included money and a disneyland visit. I was given a long code, two telephone numbers (one in Paris) and a timed count-down of a few seconds (when I picked up the message). This made me suspicious and I ignored the whole thing. Was this wise?
Yes, ignoring a message like that was wise.
Maybe you are interested in a deal on real estate in southern Florida, like about halfway between Naples and Fort Lauderdale just south of I-75? -
Unable to find line break between two lines in attachment file.
Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF; -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF; -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file. -
How to draw a line on ADF page between two nodes for mapping.
Hi everyone,
Does anyone have a solution that how can I wiring two points by drawing a line on ADF pages.
My scenario is user want to do a mapping between two xml files. We will build an ADF faces page. This page have two parts, left part contains one tree(base on the source xml), right part is the destination tree(target xml). User can drag an node from left and drop to right. Meantime, a line will be created to connect two node, it would be perfect that when user scroll down the page, or extend the tree node, the line between source and target will be remain connection two node.
Does anyone have a solution for this, thanks in advance.
Hongfu.so you want to do something like. xsl mapper in soa
http://www.haertfelder.com/images/pSoaBPEL3.png
i can think of using javascript.. not sure... neeed extra programming.. -
Polar equation of a line between two points
I am trying to make a method to output the points (in polar coordinates (r, theta)) along a line between two given polar coordinates.
This will mimick the path of an object traveling across a radar screen.
Is this possible?Java does not plot in polar coordiantes, you'll have to convert to rectangular to get a plot. If you're just doing a sweep on a screen, then it's fairly simple to do:
r is the radius of your screen,
(0,0) is your Origin translated as (Xmax/2, Ymax/2)
when you draw the line you just start at your Origin and get your end values as
X1=X0+r*cos(Theta) and
Y1=Y0+r*sin(Theta),
I've not seen, nor do I think there is any other support to do what you want--you have to convert to (x,y) coordinate system.
This will leave a ragged edge so make a border around your screen.
import java.awt.Color;
import java.awt.Dimension;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
import java.awt.Point;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.Timer;
public class JRadar{
public JRadar(){
JPanel p = new MyJPanel();
JFrame f = new JFrame("ForumJunk: JRadar");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.add(p);
f.pack();
f.setVisible(true);
public static void main(String[] args){
new JRadar();
class MyJPanel extends JPanel implements ActionListener{
Timer t = new Timer(10, this);
Dimension d = new Dimension(512, 512);
BufferedImage bi = new BufferedImage(d.width, d.height, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bi.createGraphics();
double theta = 0;
int r = d.width/2 - 16;
Point origin = new Point(d.width/2, d.height/2);
public MyJPanel(){
g.setColor(Color.RED);
this.setPreferredSize(d);
t.start();
public void actionPerformed(ActionEvent e){
g.clearRect(0, 0, d.width, d.height);
g.drawOval(16, 16, 480, 480);
g.drawLine(origin.x, origin.y, (int)(origin.x+r*Math.cos(theta)), (int)(origin.y+r*Math.sin(theta)));
theta += 0.01;
if(theta>=Math.PI*2) theta = 0.0;
repaint();
public void paintComponent(Graphics g){
super.paintComponent(g);
g.drawImage(bi, 0, 0, this);
}Edited by: morgalr on Mar 3, 2010 4:59 PM: code example added -
Dont want to show the divided line between two rows in a Grid.
Hello Friends,
I want a Grid in which I want multiple rows but i dont want to show the divided line between two rows.
It is just like a grid on Territories form(Administrator->SetUp->General->Territories)
Thanks.Mithun,
The component you're talking about is not a grid, and that component is not exposed by the UI API so you cannot use it.
Regards,
Vítor Vieira
Maybe you are looking for
-
Well, my utterly horrible Abit AV8 finally locked up the PCI/AGP buses (or so I thought) two nights ago, so I started doing some decent overclocking. I upped the FSB to 250MHz with a 4x HT multi and a 9.5 CPU multi. Ram was running well at 1:1 at 2.5
-
Is there a fix to the scrolling bug in Dreamweaver on Surface Pro 3?
On my SP3 with the latest update of Dreamweaver CC I experience the code window merging lines over each other when scrolling. This is hard to explain but say I pull the scroll bar down the lines of code appear to stay where they are but the line num
-
Creating a Form in Acrobat 9.4.4
I created a nice tidy PDF fill-in form to use in my office. When I open, use and print, it looks great. My boss opens it on her computer, fills it out, and saves it. When I open it, all the fields are blank. If I click on some of the fields, the text
-
Hi, In my mapping programs the buttons "Map selected field and substrucutres if Names are identical", "Clear Mapping", "Data Flow editor"...... " are all disabled. These buttons are just below the Design, Test, Message Tabs. Ofcourse i am in Edit Mod
-
How to start grounding for the architecture role?
Hi , I would like to change to an architect role from developer. I am having 5 year of experience in developing the application using MS Technology. So need information on the same. Regards, Amit