Really annoying problem, can't get past 'getting started' screen!

Hi,
Can't get ipod and itunes working for the first time!
Ipod is plugged in and appears in the itunes menu, click on ipod and a screen appears on the right hand side saying something like 'getting started'. The problem is that the type runs over the edge of the window (can't read all the info) and there's no link/tickbox to set up the ipod. Tried widening window but moves about an inch then stops. Is there any way to get things working without this annoying problem?
I'm trying to get this working for a friend and don't know much about Windows as I use a mac (which worked first time with my ipod!).
Any replies appreciated, Steve.
Ipod classic 80 gig/win XP/itunes 7.5

I have the EXACT same problem. I own a first generation iPod nano and I loved it so much that I bought my boyfriend the 3rd generation. I downloaded iTunes for him and everything was going great until I went to register. The screen is doing exactly what you described. You can tell there is something on the right side that needs to be clicked but you can't scroll over there to do it. I'm frustrated because he wanted to sync all his music before we started to travel for the holidays and now we can't! Please let me know if you figure anything out or find out anything. Thank you!!
FYI - I tried to register online to see if that would help but it didn't make a difference. Also, you can still put songs onto your iPod by dragging them into the iPod section but once they are there you can't manipulate them or take them back off.
Message was edited by: clp320

Similar Messages

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

My husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

my husband has 1 of the newer macbook pros that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

Hi...
Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
he cant use his key board
You'll need to use a wired (USB) keyboard.

MacBook Pro won't get past gray start screen - RunTime corruption error

Hi, I am a novice when it comes to fixing things, so I will make a Genius Bar appointment, but I thought I would consult this community first in case anyone has experienced this same issue:
I was using my 13 in. MacBook Pro this morning after not using it for a couple weeks. (It was running fine last time.) It started up fine, and the few applications I was using worked OK. Then I got an error saying I needed to update my Java in order to access my work VPN. I didn't think twice about downloading the Java upgrade. Once the Java download was complete, I thought I might need to restart to get the VPN to recognize the update. And that was the last time I was able to see my desktop. I restarted, and the could not get past the gray screen. I did this twice. Then I did a safe boot (showing the status of the progression), and that when I saw this message over and over and over:
hfs: RunTime corruption detected on MacIntosh HD, fsck will be forced on next mount.
hfs: BlockMarkFreeInternal () trying to free unallocated blocks (10865570,8) on volume MacIntosh HD
(I snapped a pic with my phone - that's how I transcribed it.)
This ran for about 20 minutes before I suspected it wasn't actually doing anything, and I forced it to shut down by pressing the power button.
I just tried to start it again (fingers crossed, hoping for a miracle), but no such luck. Does anyone have any ideas? Is all lost? Thank you in advance for any recommendations!
Jennifer

I should add that I don't know if the Java download is responsible - could just be a coincidence that it was the last thing I did/downloaded before restarting.

When i start up my Ipad it says I don't have enough storage in icloud to do a backup. Goto settings and alter it or something. However it wont let me get past the starting screen to access settings.

When I start up my i-pad it says "This ipad cannot be backed up because there is not enough iCloud storage available. You can manage your storage in settings." it has 2 buttons 'cancel' and 'settings', neither do anything and slide to un lock does nothing. Help

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
I can get into safe mode. But no regular startup.
I tried disabling bluetooth, thinking that might be related. It didn't help.
I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
But I still get hung on the blue screen when trying a normal startup.
All help would be appreciated.

Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem.

My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Help! I can't get past the blue screen

I was having problems with my iMac last week with it freezing while doing my normal stuff. I force quit everything and restarted. This went on 3 or 4 times in one night. I shut it down for the night. The next morning, I started it up and it wouldn't get past the blue screen. It first got to the screen with the progression bar on the blue screen. So i did the troubleshooting in the manual. I had to go buy the USB mouse because I couldn't do it with my bluetooth mouse. Then I got so frustrated I did an archive and install. But it still would hang on the blue screen. So being more frustrated I erased my 160 gig hard drive since most of it is on my iBook G4, music, pix etc. Plus i have most of the stuff on my iDisk too and jump drives. I need to know what I can do before I have to drive 45 minutes to the nearest authorized Apple repair and reseller. My only days off to drive down are Wed and Fri. I would like to be able to load Leopard because all the problems started occurring the day Leopard arrived in the mail.. HAHA.

Hi there,
Have you booted off the Install Disk by holding the *d key* down at boot-up, (not the c key), and run the extended Apple HW Test? Some Install disks require holding the Option key at bootup to select the AHT. Some Macs came with separate AHT CDs.
It sounds like either HDD problems, or Logic Board naybe.
Before you try another Install, Erase the HDD with the Zero Data Option...
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, then chose MacOS Extended Journalled.
6. Click Erase & look for Options. choose Zero 1 pass.

My new iMac had the old data transferred in-store but now it won't accept the password on the first screen. How can I reset this? I can't get past the first screen as a result.

I cannot get past the initial screen on my new iMac. Data was transferred from my old computer so when I turned it on It automatically had my name in the window and asked for the password, but none of my old passwords seem to be accepted. How can I fix this?? It's a new IMac with osx.

Which password isn't working? The one to access the iPad or the one to get your hotmail?
If hot mail, you go into the settings, mail, contacts and calendars and edit your hot mail account. Of if it won't edit, delete it off the iPad, then re-add it with the new password.

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Can not get past log on screen

I am having trouble logging on to our macbook when it boots up a window comes up log in unsuccessful error has occured. I have tried starting up in safe mode and resetting power management.
Help please???

Thanks, Andrew for your help. Not sure if you will see this, but I did the above and it said the HD was okay. Rebooted it and still won't go past login page. Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified. I once more rebooted, but it still won't get past the login screen. Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously. Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed? TIA again.

I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

MacBook Pro
MacBook Pro Apple Support
Apple Support Lion
Lion Mac OS X Communities

How can I get past the white screen?

When I start my iMac I see a message that my start up disk is full and that I need to delete files. After I type in my user name and password, all I see if a white screen. This problem started today. The error message about the start up disk started two days ago, and when I looked at the disk, I saw that over half of it has files described as "other". The hard drive is 250 GB. I have Time Machine backups but I don't know how to get to them to help me. So, I guess that I have two questions: how do I get past the white screen, and what are the files that are catogoraized as other? Thanks.

I did not put the OS info in my question because I am not sure what I have. I upgraded to Lion so that I could use the cloud between my devices, however I do not know the number.
Apple menu item->About this Mac and the version is listed there. Click on that and get the build number. Click again and get the machine's serial number.
I am stuck on the white screen. Any other advice?
Start with a google search for white screen mac. This one might do the trick: http://www.mac-forums.com/forums/apple-desktops/138137-imac-wont-get-passed-whit e-screen.html

Can't get past the white screen at start up

I can not get past the white screen when it starts up. It will chime and then stay at the white screen. I have replaced the hard drive, memory, battery. I have reset the PRAM and the SMC.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Really annoying problem, can't get past 'getting started' screen!

Similar Messages

Maybe you are looking for