REALLY BIG PROBLEM!!!!!!!!! HELP

So I got this Microsoft mouse with a zoom button on it and when I turn on my powerbook it just zooms all the way in and I have to click the zoom button to get the screen back to normal.
so I had the bright idea to go into preferences and disable the zoom button.
so now i restart my computer and it zooms all the way in, but the zoom button is disabled so I cant zoom out. And the screen is zoomed in so far that all I can see is the pointer, so i can not go to preferences to change it.
So I am in a very bad position and i need to submit a project first thing tomorrow morning. Someone please help!!!!!!!!!!!!!
things i have tried:
I tried starting it up as an external hard drive and deleting all the microsoft mouse files but this did not work 3 times in a row. Every time I started back up it was zoomed in all the way and some the microsoft mouse preferences kept on showing up on the hard drive.

allright, I got it to work by just deleting my whole preferances folder, then reinstalling the mouse. But that only worked for like two startups now it is doing the same thing again!!!!!
the camand option 8 worked but I don't want it to do it at all
screw microsoft

Similar Messages

  • I have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me

         i have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me apple.corp and please tell me if this is not possible to be done it almost a month that i cant use my iphone.
         thank you for those who read this
    <Email Edited by Host>

    Remove your email address.  This is a public website, and you are addressing thousands of strangers.
    After doing that, tell us what your issue actually is.  This is a user-to-user technical forum.  You are not addressing Apple here.

  • G'day, my name is allysa and I'm only 13 y/. I have a really big problem to my iPod, my home button doesn't work so I can't go back to any application everytime I want, what should I do ? Please help me

    G'day My name is allysa and I'm only 13 year old, I have a really big problem at my iPod touch. I'm really worried about my iPod touch home button doesn't work I'm not sure why is it broken,I never drop it or put water on it. Please apple support community please help me. I bought my iPod touch 2 years ago.

    Hi,
    You can use the alternative called assistive touch to enable assistive touch go to settings>general>Accessibility>scroll down to the bottom of the page and enable assistive touch a white dot at the bottom right of your screen will appear press the white dot and you will see the home button
    Hope this helps
    N.B. book an appointment with an apple genius although they will charge you if you get your iPod fixed by their repair services due to your warranty expiring 

  • Lenovo B590 big problem, HELP!!!

    Hello,
    I have big problem with my Lenovo B590 20206 laptop. [windows 7 pro 64 bit installed]
    After turn my laptop to standby mode (manualy or after 1 hour without use laptop) and when I want to wake up laptop all what I see is black screen and I must hold push power button for 5 second to force off.
    BTW when laptop is in standby mode everything looks good, led is blinking and after pushing any button I hear that fan and hard disk is starting but all what i got is black screen, even CTRL + ALT + DEL doesnt work.
    I've tried replace RAM, reinstalled alot of drivers but without success. Windows 7 of course works perfect, only sleep mode (standby] doesnt work.
    Another problem is that i cant update bios, my current is 1.10 which is not recent imho (maybe bios update would help with problem above?). Ive downloaded  BIOS Update Utility for Windows 7 from lenovo site but when i tried to update i ve got a warning like this:
    so i tried to update from Windows 7 and BIOS Update Utility for CD ISO image and i got error "THE SYSTEM PROGRAM FILE IS DAMAGED. THE PROCESS HAS BEEN CANCELED."
    My last question is about disk replacement in that lenovo b590, original 500gb disk is 7mm high, can I replace it with 9,5mm disk?
    Any help would be appreciated, sorry for my english btw.

    hi feeling,
    Welcome to Lenovo Community Forums!
    About the sleep Issue
       Can you try the solution on this article
             http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/u310-touch-Wakes-from-sleep-then-goes-back-...
    About the BIOs Update can you check and share what it says under your Bios with regards to the version installed
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HAVING A REALLY BIG PROBLEM

    I was using my Mac this afternoon, and it froze up, I turned it off, than back on and still doing the same thing. I than again turned it off for a couple of hours, and still cannot get into anything. Please help,
    Karen

    I really think you have some hardware problems. It may just be the hard drive, but I can't tell.
    When the disk came back out, did it try to read the disk before you restarted, and then spit it out?
    If so, try shutting down, restart and put the disk in immediately while holding down the c key.
    I will ask the moderators to move this post the Leopard forum.

  • Who wants a challenge? Really big problem!

    Okay I'm working on a web page here. This creates several problems becuase I've never built one with java interefaces before. I need to write a java interface with the html code. Like so:
    Title
    yadayada(html code)
    GUI
    yadayada
    GUI
    End of web page
    So i take in the information fromtwo different GUI's that are not connected for the simple reason that there is html code in between them. However, I need to take the information provided by both GUI's and move it to a separate application where the logical portion of the web page can work with it. Someone suggested a serlet might be necessary but I don't know how to write one. If you think I need one could you tell me how or tell where to find out?
    Anyway second problem. After taking in the information from the GUI I have to create a new page which would look something like this.
    Title
    yadayada
    yadayad
    variable reference from the GUI
    yadayada
    more html code
    etc.
    To simplfy it I need to take the information I obtained through the java GUI and place it in a small and very specific area of the next page. I have no idea how to do this. If someone could give me a hand! Need help!

    I guess you want to get values out of both applets (I assume you are using applets) into hidden fields. These would then be sent to the server during a http post for inclusion in the next page generated.
    My first approach would be to put the 'Post' button on one of your applets (or in a separate one). When it is clicked, transfer the values you want over to the html hidden fields using the Netscape LiveConnect package before posting the form.
    http://developer.netscape.com/docs/manuals/communicator/jsref/pkg.htm
    I have used LiveConnect to read fields from applets in this well flamed 5K entry: http://www.the5k.org/description.asp/entry_id=284 the sources for which are available on http://www.reg.clara.co.uk .
    Despite appearing to be Netscape only, this actually works in NS4, NS6, IE4 and IE5. However, you have to be careful as some of the LiveConnect in IE4 doesn't seem to work.
    The hard to spot detail is to add the MAYSCRIPT attribute to your APPLET tag, otherwise nothing happens.
    You can get hold of values from other applets through the using the AppletContext, which will return references to other applets on the page. (Never tried this bit though).
    A second but maybe simpler approach would to be to interrogate the applets from javascript. You can apparently call methods on your applets from javascript.
    http://developer.netscape.com/docs/manuals/communicator/jsguide4/livecon.htm#1007749
    But I haven't tried this myself and I don't know if it works in IE.
    Hope this helps
    Reg

  • Hi i have a really big problem with my icloud

    HI YA THIS PROBLEM IS A LONG TIME AGO i have deleted my very old account and i cant get access to my i cloud and even thought i can get the original receipt that i bought my phone.
    and one of my friend told me that i should make and new email address and when i do i still cant get access to it and its really important data on my whats app i need to back it up in other what what should i do

    Hi there mirchew85,
    Welcome to Apple Support Communities. 
    It sounds like you’re running into an issue accessing an iCloud account that you’ve previously stopped using. Take a look at the article linked below, it outlines the options available for resetting your Apple ID password.
    If you forgot your Apple ID password - Apple Support
    After you enter your Apple ID, there are three ways you can change your password:
    Answer your security questions. Use these steps if you know the answers to your security questions.
    Use email authentication. We'll send you an email that you can use to change your password.
    Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
    Ciao,
    -Jason

  • Z87 msi mpower big problem help me please auto turn off and never boot

    i had bought msi z87 mpower from amazon 2 weeks ago while trying to open it, it just turn on and leds light up but no beep/ no display= no signal , i tried to take it out of case the same problem tried it with 1 stick of ram g-skill 1600 mhz 4g same problem i removed the vga card same problem i removed the ram , the motherboard didn't recognize it and power on led on but no beep nothing debug led all the time 00 , with cpu i5 4690k only some people told me , mobo didn't recognize the cpu because it's haswell refresh need update for bios , but how when i can't see any screen and it can't even boot just fan spin and leds light up nothing else , i sent it to some msi technical support in egypt to try to make bios for it , he told me he could bot it and update it from windows normally without any problem and he sent it back to me , while i took it to try at my home with my cpu the same problem motherboard didn't recognize my cpu , i had connected everything and as well wifi card with the pin and the 4 kits of 16 giga ram trying to power on same problem i did 1 restart and the motherboard never turns on again like dead
    i get it out the case and removed everything except wifi card same problem no power i just removed the wifi card it turns on for 1 second the turn off automatically i connect it again, and mobo don't turn on again i just release this pin of wifi card out of mobo the leds turn on like if the pin of wifi card shorting the motherboard i don't know why i removed it at all and try to turn on the motherboard light up and fans works for 1 sec then turn off automatically like the motherboard shut down it self for safety i try to connect the vga card only with 1 ram and cpu but the motherboard don't turn on at all , so motherboard only turn on now with 1 ram and cpu just turn on for 1 sec and then off if i connect anything more it will not turn on at all same problem with other power supply i sent it back to technical shop they said it's just bios corrupted and nothing bad but they told me they can't make it because bios files on msi site doesn't work for some reason and they want to give me it back like that turn on/ off immediately what could i do , did they make something bad when i sent it to them at start because it was turn on normally and when i try it just 1 restart and full fail to power after that and they admit , they had work through it to windows and make normal bios update so what would be the issue , i feel like if wifi card made some short to the motherboard with it's pin or the bios failed ot recognize wifi card and failed after 1 restart i don't know where to start or what to do psu good cpu good ram is good tested what could make some motherboard no turn on , as well i have removed the battery for 5 minutes and try with it and i made clear cmos button still same and they said they didn't touch motherboard while making bios
    help me please
    pc spec:
    cpu i5 4690k
    mobo msi z87 mpower
    ram g-skill 1600 4giga
    vga zotac gtx 970 amp extreme edition OC
     psu seasonic 600 watt eco
    case corsair spec 03 gamming

    Quote from: bassam.mohamed20 on 13-April-15, 02:46:28
    okay tomorrow i will try another processor chip but what if doesn't work , same here i suspect it's bios so what could let some motherboard turn on and off immediately?
    Bad CPU? bad Motherboard? Other stuff.
    The only way to know is testing parts.
    You said it already worked with another CPU. Did you check CPU socket pins?

  • URGENT, Big Big Problem, HELP

    Hello MSI gaming forum
    Motherboard: Z87-G45
    I am posting on this forum because my main pc has been effected and i cant do my course work. I turn on my pc and everything seems to be running. But on my display it says no signal. i've tried taking out the graphics car and using the integrated graphics and that didn't work. Tried taking my ram out and that didn't work. The hard drives sound like they are being read but there but my HDD Light on my case doesn't flash like it did before. And the on button one the case is supposed to tight up but now it isn't. I've tried resetting the CMOS but i cant even boot up into the bios because my display says "no signal". 
    Literally was working one day and then the next day it just didn't display anything.
    Please can someone help me out because i have no clue what is wrong with my pc and struggling to do my coursework and now maybe falling behind on my work.

    Quote from: reissjanda on 04-February-15, 22:31:23
    Thanks for replying, I've done what you have said but it's hasn't worked, the fans still spin but again says no signal
    So that means even using the integrated video on the motherboard (no video card installed) produced anything on the screen?
    At this point, it can only be 2 things. Motherboard or CPU. Hard to say which it is without having something to swap into the system and find out.

  • Stupid Question but BIG problem - Help!

    I recently transferred all my music files from an external USB drive to my new internal hard drive. Now when I launch iTunes, it can't find find my music. I've tried consolidating the library but its no use. Maybe I'm doing it wrong? If I click on a song it asks me to find it myself, which is easy but I have over 700 albums in there! What <edited by host> have I done! Please help!!

    Glad to help both of you!
    H a p p y H o l i d a y s !

  • Big problems help plz

    Since upgrading to a MSI K8N Neo Platinum nForce3 250 (Socket 754)  and a A64 3000..the rest of my system is in sig
    i didnt think it was running that fast..and when i did a benchmark with 3d mark 01 it showed up with 17700...and that was with the gfx card overclcoked
    i tried messing about with memory timings and overclocking the rig a bit but was still far from impressed....anyway
    i bought a new heatsink/fan and a raptor grive to use for my O/S after i had put it all together and switched on the comp it just didnt boot ....all i got was one longish beep the a pause followed by another and so on .
    i tried reseating the cpu and heatsink tried the memory in different slots checked gfx card etc still nothing...
    anyway i went back to my n/force 2 and barton 2500@3200 with the same memory and gfx card i used on the A64 and it works fine....i benchmarked it with 3d mark 01 and got a score of about 16700...without the gfx card overclocked.....
    so have i got a borked mobo or borked chip the new system should be a lot faster than a barton 2500..can anyone tell me what the beep means off this mobo....
    cheers in advance for any replies Bram

    You can find BIOS beep codes at: http://bioscentral.com/beepcodes/awardbeep.htm
    It's not clear to me whether any of those apply to you...are you having a repeating long beep or is it long then short?
    Does your CPU fan appear to be running at its full speed? Did you make sure to clean off the old thermal compound fully? Is the new thermal compound applied properly? (don't use too much!)
    Have you tried clearing the CMOS? Unplug, and remove the battery for a minute or two. Try also to startup with nothing connected but the CPU, graphics card, and 1 stick of RAM. Before anyone else says it, as it seems to be the answer to end all answers for any problems in this forum, what is your power supply rated at? Not just watts but each rail...for example my PSU: 3.3v 30A 5v 38a 12V1 18A 12v2 15A
    Finally, you're not going to see much of an increase in 3dMark tests just because you're on a faster CPU. It's almost completely based off your graphics card. I have a 9800PRO that tests at about 2% faster going from 200mhz to 220mhz for example on my A64 3200+.
    Just some general ideas to try based on my recent experiences...in the last month or so I've built 3 PCs, 2 for relatives and 1 for myself. I think about every problem you can have I encountered but it was a great learning experience and a lot of fun!

  • My big problem Help me plz?

    Hi,
    My question is,
    How to make a jar file or an executable file for swing programs,
    please help me.
    Thanks a lot.
    Mr.John...

    You just use the jar tool that comes with your sdk and to make it self-running u simply place i line like:
    Main-Class: yourclassname
    but don't add a .class extension to your main class name
    also, for more information on using the jar tool go to:
    http://java.sun.com/j2se/1.4.2/docs/tooldocs/solaris/jar.html
    if your using solaris or linux
    or
    http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/jar.html
    if your using windows

  • REALLY BIG PROBLEM

    I bought my ipod (30b classic) a year ago last tuesday, and a few weeks ago it broke, it wasnt recognized on a computer (i tried three) and it shows a sad face then turns off and it makes A clicking sound whenever i try to turn it on. i took it to the apple store a few days before my warraty would run out (because of the one year warranty) but when they looked at it they said it was purchased in JUNE and therefore my warranty had run out a few months back. i am 100% sure i bought it october last year, and the reciept is long gone. so i have a depressed ipod, no warranty, and no proof that the date is wrong.
    i am at a loss of what to do..

    Without the receipt there is nothing you can do about the warranty. I think the system is usually pretty close to when it was purchased. Did you do the online registration when you set up your iPod?
    Read the post by Mitch in this thread: http://discussions.apple.com/message.jspa?messageID=2369954#2369954
    ...and try the steps he suggests. If that doesn't work you can try a 3rd party repair site, such as http://www.iresq.com or Google for more.

  • Very big problem: all titles deleted

    hey!
    i hope you can help me because i´ve got a really big problem (as my ipod is part of my life, haha)
    so..
    my ipod was nearly full when i added some more titles to my library. that was too much for my ipod nano (2 gb). it asked me whether i´d like to add just an selection (that itunes would automatically choose for me) to the ipod. i chose yes. itunes created a playing list (?) named "itunes auswahl" (itunes selection?) so far everything went well - all "old" titles plus some of the new ones were on my ipod. but that playing list blocked all my other ones (e.g. top 25, my favorites...) so i deleted the "ipod auswahl"-list. that was the big error, i guess. because after then, none of the titles (except 3 podcasts) existed on my ipod anymore (but in the library, phew!). what a shock. i tried to update my ipod, but it didn-t work - there´s always this message saying that the ipod can´t be updated because the playlist for that doesn´t exist anymore. then i keep on switching the options from "ausgewählte wiedergabelisten" (update only chosen playlists) to "alle titel und wiedergabelisten" (update everything). then i try to update it again, but then it says: "der ipod "ipod" kann nicht aktualisiert werden. dieser datenträger ist weder lesbar noch beschreibbar." (this ipod can´t be updated. this data medium is neither readably nor recordably.) so - what to do? i tried to put back the ipod, to install it new (i´ve got the newest version of itunes now), but nothing worked.
    please help me really quick. would be so nice.
    and please don´t look at my mistakes - i´m just a pupil from germany.
    thanks and with best wishes
    hannah
    ipod nano   Windows XP  

    thanks.
    but it doesn´t work yet!! it´s the same problem. when i put the ipod in, in the music settings there´s the setting that it shall just sync the titles from selected playlists. but there isn´t any playlist ticked. so i tick the playlist "-ipod" which i created and try to sync it then. but then there´s always the message which says that the ipod isn´t recordably nor readably.
    i think the problem is that my pc can´t remember the music settings because everytime it´s switched to what it was in the beginning. and after changing that the ipod can´t be synced (?) well you know what i mean i guess
    sorry it´s really hard to explain but i hope you understand.
    thanks so much for helping me - i´m nearly despaired. :-s

  • Really, really weird problem involving iPhone and Exposé

    Hey Mac users, try to figure this one out, this started happening to me today:
    My iPhone is rarely near my Mac Pro, but today I set it on top of my Mac Pro to let it charge. When it's connected to the Edge network, and there's network activity, I get the usual "beepbeepbeep" through my system's speakers, except now there's a twist. Whenever I hear the network activity interference, Exposé on my Mac Pro flips out, and acts as if I pushed the "Show/Hide Desktop" button a whole bunch of times. It stops when the activity stops.
    It's not reproducible all the time, and only happens every once in a while. But it definitely only happens during Edge network activity. I've never gotten it while in 3G or Wifi modes.
    I am guessing that the Edge signal is interfering with my Apple Bluetooth Keyboard, or something. I don't have any keys mapped to "Show Desktop," though.
    If anyone has any thoughts on this, I'd love to hear it. This isn't a really big problem, I just keep my phone away from my Mac Pro now.

    If you go into settings - general - about it will give you the version, the latest one is 2.0.1. Updating your phone may solve the problems. Failing that, take it to your nearest Apple store for advice.

Maybe you are looking for