Really long spinning beach balls when trying a video chat

I just migrated from an older Mac to a brand new Mac Pro 2.66. I plugged in my iSight and tried to do a video conference, only to get a spinning beach ball for >1 minute before the video chat commenced.
Later I tried to access my own camera (by clicking on the camera button at the top of my buddy list) and likewise, >1 minute of spinning beach ball, THEN it worked OK.
Going to the Preferences > Video tab, likewise, spinning beach ball.
Any ideas on how to diagnose and fix this?
Already repaired permissions, and tried unplugging/replugging the iSight.

Hi David,
In iChat > Preferences > Video section you should have a drop down to Pick the camera (either Internal or External).
Have you done this ?
By default iChat will use the Firewire one as first choice (to the extent of changing mid chat if connected.
2:52 PM Sunday; November 26, 2006

Similar Messages

Spinning Beach Ball when trying to install CC

Help, help, help me pleeeeeze? I have job to do before the end of the weekend... I'm getting desperate!
I got the dmg file and tried to use the Creative Cloud Installer to start my free trial, but double clicking on the installer icon only produces a DLOG that says "Initializing Installer" with an empty progress bar and "Retry" and "Cancel" buttons. Neither of which is available, as the cursor turns into a spinning beach ball immediately, and nothing happens.
I have shut down and rebooted; repaired permissions and verified the hard drive. Nothing is working. Here is my system (yes, I know I barely meet the minimum requirements):
OSX Version 10.9.1
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB52.0088.B05
SMC Version (system):          1.38f5
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0866
Revision ID:          0x00b1
ROM Revision:          3384
Displays:
ACER X233H:
Resolution:          1920 x 1080 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Firewall Settings:
Mode:          Allow all incoming connections
Firewall Logging:          Yes
Stealth Mode:          No
Any ideas? Thanks for your input in advance.
Mandolynda
Message was edited by: Mandolynda

Unfortunately, the fix didn't stick. When the CC app told me it needed an update last night, I downloaded the update (because it wouldn't let me run AI unless I did), opened the .dmg file. It opened the DLOG (Initiating) and then wham: spinning beach ball forever. I have already tried:
Activity Monitor & canceled the task
Repaired permissions
Restarted computer
Re-downloaded the CC app
--no good, same outcome
so, I...
Canceled the task in the Activity Monitor
Plugged in the ethernet and turned off the WIFI (which is what fixed it, finally, the FIRST time this happened
Shut down and restarted the computer
Ran the Cleaner program [http://www.adobe.com/support/contact/cscleanertool.html] (uninstalled *every* Adobe program on my computer)
Re-downloaded the CC app and attempted install
--no good, same outcome
Frustrated out of my mind at that point, I shut off the computer and walked away. I don't know how the hell I'm ever going to get any work done! I'm sure not convinced I should buy a subscription at this point. I think I'll have to let my trial expire and just do all my free-lance work at my daytime job! Adobe won't be making any more money from me that way.

Spinning Beach Ball When Trying To Capture

Upon trying to capture, using a new camcorder (Canon HV20), in the small black window where the capturing footage would appear, it is black, and in the caption area below it says
"Waiting for timecode.
Device must be in VTR when device control is enabled.
Press Esc to abort."
I pressed Esc and got the spinning beach ball. It's been spinning for 5 minutes or so. What do I do? Thanks.

Please give FULL information of your entire system, OS version, QT version, FCE version, computer, drives, how everything's connected, settings on the media and settings used in FCE.

Spinning Beach Ball when trying to access Oct. and Nov.

I can't quite figure this one out. Every time I try to access Oct. or Nov. 2010 on my ical, I get a spinning beach ball that lasts for 20 minutes. I have tried erasing my ical and replacing it with my MobileMe data, but it still doesn't work. Any thoughts?

Your profile says you are running 10.5.5. Are you up to date at 10.5.8?
Try reseting your sync history: http://docs.info.apple.com/article.html?path=iSync/2.0/en/isc39.html
If the issue still persists follow this article: http://support.apple.com/kb/TS1627
If the issue STILL persists, export out each of your calendars one at a time using File > Export.
Add 1 new calendar to your iCal.
Import each calendar back in one at a time to a new calendar testing after each import to see if the issue persists.
Once all the calendars are re-imported you can delete the extra calendar.
Hope that helps

Spinning Beach Ball When Trying to Login from Screensaver

This has been an ongoing problem for a couple of years on this Mac Pro, through all versions of OS X 10.4.5 or so to the current 10.4.6. I actually get the same sort of thing, without the beach ball, on my MacBook Pro when trying to bring it out of sleep mode.
Using just the Apple Computer Name screensaver (or any other), a couple of times per month, when I hit the mouse or keyboard to login, there'll be a long delay, and then the beach ball of death appears. Nothing happens after that, but if I don't touch anything, the beach ball eventually goes away, but the screensaver never comes back. Move the mouse and the beach ball comes back.
I can ssh into the system and run terminal commands, including TOP and PS, but nothing revealing in those, but admittedly, I am not sure what to be looking for.
The only way to recover the system is to hold the power key and force a reboot. Usually a sudo reboot or shutdown over ssh will kill the system, but today even that wouldn't work.
My theory is that something running has stalled and the login screen can't activate until that stall is cleared or killed, but what's frustrating is I can't figure out what's stalled, assuming that's even a correct theory. Another possibility is maybe a network share that's mounted is hanging things up for some reason.
These intermittent kinds of problems are maddening.
Is there a console log or ssh terminal command that might be revealing in this circumstance?
Any ideas?
Message was edited by: DSA1

Wow, I'd forgotten that this thread was even open. Surprised to see responses. I forgot to subscribe to it, so I missed the recent discussions.
The link posted by dhkumd above has a post that talks about deleting some preference files via terminal. I haven't tried that yet, but it looks like I've found a similar solution (deleting a particular preference file) on my system for the time being:
I found this post on MacRumor's forums: http://forums.macrumors.com/showthread.php?t=541964
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Seems to have worked for me with short runs of screensaver enabled. I will have to see what happens overnight before I declare the problem solved. This seems a bit safer than using terminal to rm files. Dragging a copy to the desktop preserves a backup, using terminal to rm them does not.

Spinning beach ball when changing length of midi region

I am get a spinning beach ball when trying to change the length (with mouse) of a midi region in the arrange window.
also when the beach ball stops spinning, the midi region hasn't changed its length at all.
Any ideas?
Thanks in advance
Marcel
G4 mirror door DP 1Ghz Mac OS X (10.3.9) Logic Pro 7 Kontakt 2

Do you have ProApps 3.1 installed?

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

You can quit Preview by selecting it in Activity Monitor and then clicking on the red octagon 'Quit Process'. That does not solve the issue of the beach ball' as such. Perhaps. a reinstall of the OS might sole the problem. That is simply a guess on my part.
Ciao.

Spinning Beach Ball when turning off Airport WiFi. SL Issues, many! Help!

I performed a clean installation of Snow Leopard on my new 13 inch late 2009 MBP on release date. All of a sudden, I am getting the infamous spinning beach ball when attempting to disable my Airport wifi. It's so bad, that I am not able to gracefully restart my system. Seriously this is getting out of hand. Snow Leopard was supposed to make Leopard even more stable.
Steps I have taken, not in any particular order.
Verified and repaired permissions.
Ran HW test, no issues found
Reset PRAM
Deleted wifi related plist files from /lib/prefs/sysconfig and rebooted;
The only thing I can think of next is to perform and Archive and Install or....
...As much as I would hate to go back, Install Leopard.
I would appreciate feedback or suggestions as what to do. Looks like 10.6.1 may be worth waiting for. Oh how I miss Tiger.

HI,
If you use an Airport Base Station or Airport Express, try resetting.
If that doesn't help...
Boot from the 10.6 disk and verify the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
If necessary, do an Archive an Install. It's the only install option available for Snow Leopard.
Carolyn

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Spinning beach ball when quitting Logic and loading projects

Hello,
Whenever I load a Logic project I get the spinning beach ball. After a while, the project is loaded and it all works, but it is taken way too long to load the plugins. I'm not even talking about big projects, and I have an SSD, so it should be much faster.
The same happens when I quit Logic. Not when I close the project, but when I actually quit Logic. The "Logic Pro" menu in the top left corner of the menu bar in OS X would light up in dark blue when I press CMD + Q, and it would stay like this for 30 seconds or so. The spinning beach ball would appear again during this time. Then it would finally quit.
I have reinstalled OS X and reinstalled Logic Pro X. But the problem was still there. It sounds like a core audio problem, but the problem occurs no matter what my sound output is set to. It happened when the audio output was set to the built-in speakers of my Mac Pro (yes Mac Pro have that!), when it was set to the speakers of the Cinema Display (LED one) and when it was set to my RME Babyface.
I don't think it's a Driver problem because it happened as well when I reinstalled OS X and Logic, and when I tested it on the Macs/Cinema Displays speakers, without the RME Babyface, basically without having installed any drivers or anything yet. So everything was fresh and untouched.
This is a very weird issue. I'm wondering if someone knows what I could do next.
My specs:
Mid 2010 Mac Pro 12-core 2,92 GHz
32 GB RAM
27" LED Cinema Display
OS X 10.9.5 Mavericks
Logic Pro 10.1.1
Thanks a lot

Hi,
thanks for your reply.
Like I said, this is a complete fresh install – I installed OS X Mavericks 10.9.5 from a USB installer, and re-downloaded Logic Pro X from the App Store. That's all. That means there's no 3rd party plugins, no 3rd party drivers, nothing, just the stock OS X system.
However, I just installed the RME Babyface drivers. But this makes no difference, as the problem was present before as well. I'm just saying that, because it appears in my EtreCheck Report which I will post an the end of this message, so you may be wondering.
I tried to delete the preference files and such before – no change.
Logic started normally (= no message or appeared or anything) while holding down Shift + Control, and also while holding down the Option key. The issue is still there. What would or what should it do if I hold these keys while starting? When I hold only the Control key however, it asked me if I wanted to start Logic without the Core Audio. I clicked to start without it, and then obviously everything worked.
So here's my EtreCheck report. Everything looks normal I'd say?
EtreCheck version: 2.1.8 (121)
Report generated 09. April 2015 16:30:01 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac Pro (Mid 2010)
    Mac Pro - model: MacPro5,1
    2 2.93 GHz 6-Core Intel Xeon CPU: 12-core
    32 GB RAM Upgradeable
        DIMM 1
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 2
            Empty
        DIMM 3
            Empty
        DIMM 4
            Empty
        DIMM 5
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 6
            Empty
        DIMM 7
            Empty
        DIMM 8
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en2: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 7950 - VRAM: 3072 MB
        LED Cinema Display 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 4:52:33
Disk Information: ℹ️
    HL-DT-ST DVD-RW GH61N
    HL-DT-ST DVD-RW GH61N
    Samsung SSD 850 PRO 512GB disk0 : (512,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh SSD (disk0s2) / : 511.25 GB (494.58 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    ST2000DM001-1ER164 disk1 : (2 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HDD (disk1s2) /Volumes/Macintosh HDD : 2.00 TB (2.00 TB free)
USB Information: ℹ️
    General UDisk
    Apple, Inc. Keyboard Hub
        Logitech Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. Apple LED Cinema Display
    Apple Inc. Display iSight
    Apple Inc. Display Audio
    RME Babyface (23483046)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    de.rme-audio.driver.RMEFirefaceUSB (2.05 - SDK 10.9) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
Launch Agents: ℹ️
    [running]    de.rme-audio.RMEfirefaceUSBAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         1%    WindowServer
         1%    Logic Pro X
         1%    coreaudiod
         1%    fontd
         1%    sysmond
Top Processes by Memory: ℹ️
    241 MB    Logic Pro X
    137 MB    mds_stores
    137 MB    Safari
    103 MB    com.apple.WebKit.WebContent
    103 MB    WindowServer
Virtual Memory Information: ℹ️
    29.92 GB    Free RAM
    2.07 GB    Active RAM
    573 MB    Inactive RAM
    1.77 GB    Wired RAM
    491 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 9, 2015, 11:37:27 AM    Self test - passed
EDIT:
Okay, apparently there *is* a little problem. This part here:
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
I believed this was normal because my audio output was set to the external USB audio interface when I ran the test, but I ran it again with the sound output set to the Cinema Display, and this message still appeared. When I click the Information symbol, it says:
These are low-level parts of your operating system, usually provided by Apple, that run in the background while a user is logged in. Any failure that appears here may indicate a problem with your system.
I can't tell if there's a link to my Logic problem, however.
PS: I just remembered that I installed a system update for the LED Cinema Display which I downloaded from the Apple Support page. Maybe it has to do with that. It may have been an old update that was not needed.

Spinning beach ball when connecting to iTunes 10.5

My 3Gs getting spinning ball when trying to synch with iTunes. My phone shows up, but then the spinning ball appears after a few seconds.

Mac OS X 10.5.8 on an Intel iMac
iPhone 3GS
iTunes 10.5
If you encounter the spinning ball, it may suffice to just wait (and wait and wait), as in my experience, eventually the spinning ball went away and my iPhone was properly connected to iTunes.
Tried to upgrade to iOS 5, and when I initially connected the iPhone to iTunes, I got the spinning ball. I found if I waited a long time, then it would connect. So I installed iOS5, which involves a very time consuming 'restore' step. At the end, none of the non-Apple apps would launch and no songs/podcasts/etc were on the iPhone.
So then I disabled 'auto-sync' in iTunes, connected my iPhone to iTunes, got the spinning ball, left it overnight, and in the morning it had connected to iTunes. Then I did a 'Restore', which involved resetting the phone and restoring from a previous backup made yesterday morning. Strange thing is that during the restore, the phone did not have 'Syncing now' or 'Restoring now' message on its screen. Seems to me that it should have.
Now, many hours later, it looks like everything is working on the phone now. And when I try to reconnect it to iTunes, it connects quickly without starting the spinning ball.
This whole process was very time-consuming and not fun...
However, after reading about how iOS 5 tends to dramatically reduce stand-by time on the 3GS, I am wondering if there is a way to go back to the previous iOS version?

Spinning Beach ball when accessing screensaver

I am getting the continous spinning beach ball. Mine ocur whenever attempting to access any of the iphoto screensavers. The first set of screensavors that are colored green wt the picture of the ladybug. There are 14 of them, labeled Floating to Clasic. Does anyone have any ideas as to what the problem wt these maverick screensavers?

Wow, I'd forgotten that this thread was even open. Surprised to see responses. I forgot to subscribe to it, so I missed the recent discussions.
The link posted by dhkumd above has a post that talks about deleting some preference files via terminal. I haven't tried that yet, but it looks like I've found a similar solution (deleting a particular preference file) on my system for the time being:
I found this post on MacRumor's forums: http://forums.macrumors.com/showthread.php?t=541964
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Seems to have worked for me with short runs of screensaver enabled. I will have to see what happens overnight before I declare the problem solved. This seems a bit safer than using terminal to rm files. Dragging a copy to the desktop preserves a backup, using terminal to rm them does not.

ITunes - new iMac freezes & beach balls when trying to sync iPhone 3

I have a new iMac running Lion. When I try to sync my old iPhone 3g, iTunes freezes with the dreaded spinning beach ball for ever! When I do connect the iPhone, iTunes recognizes my phone in the list, but does not ever give me the option to even erase all my old content. Stranger still - when I get tired of the beach ball spinning and disconnect the iphone, the itunes list briefly displays all my iphone content (playlists, etc.) and then goes away. We have successfully synced a very old ipod shuffle (after wiping its contents) to new Imac, so cables, etc are not the issue. we did have to de-authorize all computers to get new Imac going, perhaps a clue? I have backed up the iphone to both an old mac mini (where it still syncs flawlessly) and have migrated data to new imac so I could recover. I am willing to lose iPhone data so I can sync. I am too cheap to buy newer iphone as it still works great.
my thoughts:
1. erase all content on iphone and then try to sync?
2. grumble and get new iphone?

do you guy's fix the problem?

No more spinning beach ball when you click on get mail?

Hi
I just bought a new iMac.
I did not have M/L on my old machine. In the mail program in it (it had Lion) when you clicked on the Get Mail button, a beach ball would spin to let you know that it was looking for mail. There is no spinning beach ball in the M/L mail program. So, how do I know that it is working? Other then when an email shows up in the in box?
Thanks
rlmslo

OS X 10.8 Mountain Lion
Mail 6.2
The "spinning gear" activity indicator is no more available in Mountain Lion.
Apple removed it.
There is a "MAIL ACTIVITY" progress bar available in the left sidebar.
Best.

Spinning beach ball when waking up from screen saver or sleep

A few months ago, my ancient (Quicksilver G4) Mac started giving me a spinning beach ball for a few seconds every time I wake it up from sleep or from the screen saver. It lasts anywhere from about 5 to 20 seconds. It never used to do this. The problem has continued despite a recent upgrade form 10.3.9 to 10.4.10. Repairing permissions and resetting PRAM hasn't helped. Any ideas?

Well... I tried many of those things in the search results, and nothing changed initially... i.e. after changing desktop backgrounds (which is all it seemed to take on my mini), and then changing passwords, I continued to not be prompted for my password until I restarted. Logging out might've worked as well, but I just went gung ho and went right for the restart.

Really long spinning beach balls when trying a video chat

Similar Messages

Maybe you are looking for