Really low sound from rear left spea

I have 5. headphones and when i have them pluged into my xtreamgamer i barly get any sound from my rear left speaker, i know it works because if i plug it in my basic MB soundcard it works fine. Is this a known problem or a fix for this?

I've installed the latest drivers, made sure the the jack is plugged in right (theres only one, that comes from the Monitor or the headphones). The CD only has an installation guide, and i know onboard sound is disabled because i never had one in the first place after a recent reformat. and before that reformat sound came out from both sides normally, so i know something is wrong with the sound card.
EDIT: i just did a random tests, and i found out that the right speaker is working, but it is playing extreamly low. i had to blare up my volume up to 00% and i bearly heard it. i've checked the playback control, and played around with it and still have same problem.Message Edited by Bigs80 on --200606:49 AM

Similar Messages

Installed NEW Soundblaster Audigy 2 ZS Drivers... No Sound from side left spea

I installed the NEW 2.8.4 Drivers for my Audidy 2 ZS and now I have to sound comming from my side left speaker. When I do the speaker tests, all the speakers work except this one.
Is anyone else having this issue. I even reinstalled the drivers again to no avail.
Urgghgh this is anoying. I get dead silence from my side left. I am using Creative T7800 7. Speakers too by the way.
If anyone can help, please let me know.
Thanks,
iLLz

JohnZS wrote:
Hi iLLz I do not have this issue with the new drivers, however may I suggest you uninstall the old drivers first. To do this. Locate the downloaded driver exe. SBAX_WEBUP_LB_2_08_0004.exe Extract this with an application called WinRAR http://www.rarsoft.com Once you have extracted the driver file run the .exe called setup.exe in your drivers folder. eg. SBAX_WEBUP_LB_2_08_0004\Drivers Select the uninstall option. Good Luck
As for additional info ...
When you update drivers by running the setup.exe found on \Drivers -folder, (or ctzapxx.exe found on it's \Support\i386 & amd64 sub folder ) --> select (tag) the "Overwrite existing shared ..." -checkbox --> you do not need to run this uninstall process at all.
jutapa

6.1 on X-Fi XtremeMusic - No Sound From Rear-Centre Spea

As the title states I have a Sony HT-DDW880 6. home theatre system. It has a multi channel out which comprises of pairs of RCA (phono) sockets L/R for Front, L/R for Rear and two outputs which appear the same for subwoofer. I connect those to the X-Fi with three seperate RCA - 3.5mm Stereo cables, into the appropriate sockets. All the sounds are emitted from the correct positions when played from my PC except the Rear-Centre. No sound comes through this at all. I do?have my PC setup for 6. in the Creative Audio Console. Is there anything I can do to enable this speaker or am I stuck with 5.

If it's a problem on the soundcard end then yes, maybe software will help but since the soundcard is able to output 6. channel and the problem is due to the limited connection on the HT end, I don't think there is any way a software will help. That's my view only, see if others have any advice for you.
Jason

Low sound from right head phone

Hi, I have been using iPod 5th generation for about 6 months.
But suddenly I get low sound from my right headphone than left headphone..
I didn't change any settings in my iPod and i have done rest too...
I am facing same problem.
Please Help me...
Thanks in advance

Hiya,
Yes, or you can put your serial number in here https://selfsolve.apple.com/GetWarranty.do
and they will send you a box to put your iPod in, which they will then either repair or replace with a new one.
Thanks
Mark

Soft sound from rear speakers while playing mov

Hi,?Gaming and music is done via all speakers (i'm using analogue connection) just fine, but when i play a movie (using powerdvd 6?deluxe) i get faint sounds from the rear speakers. I had contact with creative's help desk in my country and we ran thru all system settings (e.g. thnx console). Everything was configured correctly., tho still a weak sound from rear speakers. They could not help me further ?I'm using a x-fi fatality soundcard with a logitech z-5400 speakerset.
When running a movie it shows a logo near the system tray : dolby digital. I am hoping one of u has a solution to this problem. Greetz,?Nask

In most of the cases, movies with mutichannel soundtrack do not use constantly every speakers. I think your case is normal and that's only your DVD's mix (as many DVD) that concentrates more on the front. try some of the sample there: http://www.digital-digest.com/dvd/do...s/trailers.phpIf the first one sound at the same level for each speakers then it's alright.

Why no sound from rear speakers (Xfi X

Vista 32bit, CMSS enabled, why no sound from rear speakers with music? XP no problem at all, only in Vista. Using latest drivers (v2.5.0004).
I realize I'm hoping against hope to get a useful answer at the Creative forums, but I do believe in miracles and the odd one happening once or twice in a lifetime, lol.

Well, I think I have an answer, from Catherina-CL's Audio in Windows Vista post. 2.The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this
Issues that may be encountered:
CMSS no longer works on audio streams from the OS.
Status:
Features based on Windows XP architecture must be rewritten to conform to the new Vista architecture, and we have a team of software engineers, project managers and testers dedicated to this task in order to provide our customers the same seamless audio experience under Windows Vista that they enjoyed under Windows XP. However, I found a somewhat crappy solution, at least with my old Altec Lansing 4 speaker/ subwoofer system. Unplug the surround cable from your subwoofer (unplugging it from the card itself has no effect). That at least will make all the speakers work, even if it's not true surround. Good for listening to music loud.

Iphone 4s really low sound

Hello,
From some months I experience the problem with the sound of the iPhone 4s. The sound is really low. You can only hear it if you put your ear very near to the speakers. I've tried everything. Settings -> Sounds to max. Restarting the iPhone. Once I've played Flappy Bird, the sound like fixed itself for 2-3seconds. From low sound it turned very loud but for 2-3 seconds. Then I've tried Restoring the iPhone to its factory settings - nothing again. I lost and my Flappy Bird...
So my Question is - can we fix the sound problem and return my flappy bird? I can't download it from the gamecenter.

vikAy,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
All my best,
Allen

No sound from rear speakers in 5.1 in mov

I have the Creative X-Fi XtremeGamer card. When I use the channel test in the Audio Console (Game Mode), I hear everything just fine. Sounds come from the correct speakers. But when I'm watching a movie (like right now, Sin City bluray version), I can only hear sounds from the front left, center and right. In games like Battlefield 2 the sounds works just fine. What could be the problem? I would really appreciate any help. A good movie is so much more with good sound.

You were right. I neglected the slider on the right in Stereo Surround mode. It should have been set to Surround. As soon as I did it the sound appeared. Thanks for your reply

Inspire T7700 7.1 + Audigy 2 ZS - NO SOUND IN REAR LEFT SPEAKER

can u help me please? after a new position of my speakers my rear left speaker didn`t work.i try all
i try 2 change this speaker in other position(center, left, right...) all fine ,but when i put in rear left this and other speakers don`t work((((((( what can i do??
win xp sp 2

Unplug the minijack connectors (orange, green, black, and gray/white) from the subwoofer's amp. Leave them connected to the soundcard. Plug the green connector into the minijact port that's meant for the rear speakers. This should make the sound meant for the front come from the rear instead.
Now play some music or run some tests. Does the Rear Left speaker work? If so, then it's a software problem. You would just have to wait for an update or you could try uninstalling the drivers (run CTZAPZZ.exe on the driver CD; in Drivers directory) and reinstalling them and the updates.
If it still does not work, then it sounds like a problem with the amplifier in the subwoofer. In this case, you'd have to return the speakers for repair.
Message Edited by TheJ on 05-26-2005 11:38 PM

4.1 Speaker Setup - No sound from rear speak

Opsys: Windows 2000 (just installed)
Card: Audigy 2 ZS Platinum
Software: Installed full sets of Creative software, everything runs
I'm trying to set up a 4. system where I'm using 2 set sets of stereo speakers plugged into line outs # and #2.
The problem is that I get sound only from line out #. All attempts at plugging the second set of speakers into the other line outs doesn't do anything for sound. I have switched the 2 sets around and they both work from lineout #.
The speaker calibration program only works for the front left and right speaker (i.e. no rear speaker output). I have tried more than just the 4. option, but none of them produce any sound to the rear speakers.
I have enabled EAX and CMSS, but this hasn't done any good. Still no sound from the rear speakers.
I checked the speaker set up and the volumes are midway for all speakers, both front and back.
Soooo. My guess is driver problems or maybe the 2 way stereo plug doesn't work with the 3 way plugs of line out #2 and #3.
Any ideas?
Rick

Okay, I get the stupid award for this one. I didn't notice that I was plugging my rear speakers into to the mic instead of the lineout 2. Well, in my defense, they are symetrically located around lineout and they do fit.
I would suggest people with sound issues to look at the other utilities. The one that helped was the Thx Setup console. This displays all info about the speakers, analog/digital settings, and even a picture showing the card plugs (that got the noodle thinking).
Also the Surround Mixer showed the correct configuration of the 4 speakers but without a sub hooked up. This fits my 2 stereo connections exactly.
Cheers.

No sound from rear 5.1 speakers plz h

hi all,
i have a audgity 2 zs card and i have 5. speakers, im not reciving any sound from the 2 rear speakers, i've tryed downloading the lastest drivers, checked all the wirering everything is in its rightful place but why am i getting no sound? i know the speakers work coz i've swaped where there pluged in and thay play no problem.. i've looked at the back of the pc and you have the 3 coloured holes where the clour coded wires go in all it seem that u dont get any sound form the black hole.. is the card fautly? this is really winding me up, i just cant figger it out! plz help me.. woman in distress!!LOL
thanks,
legacylady

Catherina-CL wrote:
I (hopefully) clarified some of this in the other thread, but this is not the way it works. Read the other thread for a more detailed rundown.
When you're playing anything that isn't a true Dolby Digital 5. source (with an encoded AC3 stream), like a game or music, you will only get stereo over a digital connection. That is normal, that is not a bug or a mistake, but that is normal. No coaxial wire is capable of passing over a 5. signal that isn't an encoded AC3 stream. If you're playing a DVD, that will work, as it's an encoded AC3 stream, but as I mentioned the card and DVD software have to be set to bypass the signal, to the encoded AC3 stream goes over the cable untouched, and your external decoder can process the signal.
Cat
Message Edited by Catherina-CL on <SPAN class=date_text>0-7-2006 <SPAN class=time_text>09:2 AM
Yes I know all that.But even if it's not a AC3 signal, like when you play a stereo MP3 file, shouldn't the Dolby Digital led on th external decoder be on anyways? Since it does transfer from a Digital out to a Digital in. I say this, because when using my internal Dolby Digital feature (nVidia Soundstorm) from the coaxial SPDIF out to the Inspire 5500's coaxial digital in, the Dolby Digital led is always on. I know it's no real 5. DD, but it is a digital signal, so it detects it and triggers the led.So I expect this to be the case with the Audigy 2 SZ too.

Get Sound From Rear Speakers with X-Fi XtremeMusic card

Have the SB X-Fi XtremeMusic soundcard combined with the Digital I/O Module so i can get digital sound through my 6. Sony Amp. I have the Digital I/O module connected to my amp via a Coaxial cable. I have set the speaker set up to 6., and have run the channel test in the Creative Console Launcher. Now heres the problem im having, i get the correct sounds coming from the front left, center, and right speakers, but when it tests the rear left speaker, the sound comes from the front left instead on the rear left, for the center rear the sound comes from the front center, and for the right rear the sound comes from the front right speaker. Can someone tell me how i get the correct sound come from the rear speakers please?

The Xbox encodes the sound on the fly to form a DD stream. No PC game encodes DD by itself, even when the game is DD certified it needs a soundcard capable of encoding it, like the soundstorm on the nforce2. If your receiver supports analog inputs use them, the DD compression would probably degrade the sound at least to the same degree than an analog connection.

X-Fi Fatal1ty No sound from rear or center in speaker tests?

I just installed the X Fi Fatalty Xtreme Gamer and cannot get sound from the rear, center or subwoofer in the speaker tests. All the speakers (Logitech G-5 Gamer)?work playing MP3's but that's it. Installed latest drivers uninstalled an reinstalled card etc?Can anyone help with this before I box everything up and ship it back to newegg? Running Vista 64Message Edited by ovrclkd on 0-23-200807:6 PM

After carefully checking this again, it turns out clicking front left or right the sound comes out BOTH the front and rear. To make things more confusing when all but the line (green) 3.5 jack was unplugged ALL the speakers would work. LONG STORY SHORT I SENT THIS P.O.S. BACK TO NEWEGG FOR REFUND. Every thing works great with the onboard audio, I'm in the market for a 7. that works.Maybe Auzentech? Any suggestions?!! With all the issues the peeps are having someone must be using a card that works out of the box in Vista 64

After Windows XP clean re-load and SB Live installation, getting no sound from rear speake

I had to re-load my Sound Blaster Li've! Value but now I don't have any sound from my rear speakers. I have set the SB settings for four speakers and my Sound and Audio setting is for Quadraphonic. I registered for auto SB updates but the system could not find any updates for my installation.
Thanks

After reading some threads I come away with some ideas and thoughts. I haven't tried everything, and there are a lot of unhappy customers out there. Creative, take note. In today's competiti've markets, you must look at yourself from the customer's viewpoint. Right or wrong, you must stri've to delight your customers, and resolve issues. Read about "Six Sigma", this is the way business will be successful in the coming years.

5.1 system, only sound from front left & ri

I'm running a x-fi platinum on vista home premiumif you need/want more specs than that, just let me know. my problem is thus, I've set the system up for 5. surround sound, I've tested the speakers and I'm only able to recieve sound to the front left and right speakers. No sound is being sent to the center, rear left or right. I'm unsure of what to do, I've read that there are other users who arent having any problems with their 5. systems and I'm hoping someone here can give me some advice on what to do. Thanks

lol wow I Just fixed it by accident. heres a screenshot of how.basically, whatever speakers were not getting sound, you uncheck them. its crazy but it works?*edited twice trying to get the pics to show up in the post *http://img.photobucket.com/albums/v4...nxx984/prt.jpghttp://img.photobucket.com/albums/v4...xx984/prt2.jpg?Message Edited by FleshWound on 02--2007:34 AM

Really low sound from rear left spea

Similar Messages

Maybe you are looking for