Really missing the 7-row

When I bought the W530, I was concerned the the chicklet, island style keyboard was gonna be a problem. It turns out that its not so bad at all. Its not as responsive as my previous T61 keyboard, but still much better than most chicklet's that I've tried.
The real problem is the new 6-row keyboard. I do a bit of programming, and I'm finding that I'm really missing the 7-row. I was quite good with the HOME/END/INS/DELETE/PGUP/PGDN keys in the upper corner. Now, they've got them all on one line, making it hard to use, and they've also separated the PGUP/PGDN and moved it by the arrow keys. I'm not a fan of this at all.
Guess now I'll have to learn VIM

Seriously.

Similar Messages

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

The_Tiger92 wrote:
So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?
It appears the 15" 2.2 ghz isn't worth spending $400 more for, but you get the 1GB Radeon 6750M that has four times the VRAM than the 15" 2.0Ghz model and about 167% more performance. High settings on all current games with over 50 fps.
If your not into 3D gaming or just light weight, then the 2.0 Ghz (last years performance) will suffice on low-medium settings at about 30 fps.
The 13" is rather poor as it has integrated graphics. 30 fps on only some games.
The high res screen is a excellent choice and the anti-glare is great for viewing just about anywhere.
No messy films to replace at $30-$40 a pop.
A lot of people bring the glossy screens back once they hear about the anti-glare.
http://www.pcpro.co.uk/blogs/2011/05/23/glossy-vs-matte-screens-why-the-pc-indus trys-out-of-touch/
Here's my 17"
In my opinion the extra $400 for another 2-3 years of use out of the computer is worth it.
Quad cores are more than enough for most uses for most people for many years, it's just a slow card is going to make the machine feel slow in rendering graphics in the future.

Is Lock Titles / Rows / Columns really missing?

Please tell me it is not so. Is Lock Titles / Rows / Columns really missing from numbers? I'm not trying to make giant sheets, but even a page full doesn't fit on the screen on my MacBook so I need to see the headers. Even my good ole AppleWork did this well.
Dan Spence

Dan,
As a new Numbers user, and an old user of conventional spreadsheets from day-one, I felt as you do and submitted feedback to Apple about spreadsheet screen-splitting. That was over a year ago before I began building spreadsheets the Numbers way. Now I wouldn't bother submitting feedback on that item. Each new spreadsheet of mine has more tables per sheet and the average table size is a fraction of what I used to make. The way I build spreadsheets now, locking the first row is something that rarely enters my mind, and if I'm working in Print View with Header Rows and Columns, my titles are always on the screen anyway.
But what if I have really long tables and don't like to see them broken up with page margins? Well, that brings up a Numbers issue far more worthy of feedback. When tables become that large, Numbers becomes so lethargic that you will look for another application to solve your problem.
That's my perspective, for whatever comfort it may bring you.
Regards,
Jerry

After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Hi! I'm a Windows XP convert... switched to an imac about 4 months ago and am LOVIN' it As a graphics designer I did use a feature on my Windows machine which I really miss on my mac... beaing able to see a preview of one of the images in a folder on top

Hi! I'm a Windows XP convert... switched to an imac about 4 months ago and am LOVIN' it As a graphics designer I did use a feature on my Windows machine which I really miss on my mac... beaing able to see a preview of one of the images in a folder on top of the folder icon. In other words, in Windows, you can see the first image that is inside the folder as an icon on the folder itself. Is there a way to do this on the mac? Maybe some software program that will do it? Thanks for you help!

It would be brilliant if Apple could make picture folders behave like events in iPhoto. You could see a photo on the folder, and also mouse over it to change pictures.
But no, there's not an application I'm aware of that does this. You can manually make a picture the folder icon, but it's a tedious process.
Unfortunately this is another example of how dated and worn out the Mac's interface is. The concept of using a file folder as the icon for a directory of images is so 80's. You could use coverflow, but that only helps once you're in the directory itself. Or use iPhoto or Aperture, although they just do photos. Or try Lyn as an alternative: it has a sort of iTunes-like interface, and makes it easy to organize photos without having to put them in iPhoto. And it can display photos that are already in Libraries.
But you'd probably need a Finder alternative. I use Leap, which displays any type of document. It also does tagging, which is another huge omission in the Finder. More like Windows Explorer (although still no photo on folder icons).
Another very stylish Finder alternative, especially useful for pictures, is FileBrowse. I don't know why it hasn't gotten more attention. It DOES put photo previews on the folders it shows. And allows one-click expansion to show the photo enlarged. It's super fast, and even allow you to group/sort by camera or flash! It really has to be seen to be appreciated. It works in Lion, although it doesn't seem to be have been updated lately. http://www.filebrowse.com/index.html
Rob

Just got a new Mac Mini with Lion - where is the downloads folder in the Window tab that is at the top of the page in Safari? I used this a lot and really miss it!

I just got a new Mac Mini with Lion - the Window tab at the top of the Safari Browser used to ahve a downloads folder in it along with Activity etc - but it is not there anymore. Any way to get it back or is there another location it sits in? I used it when I'd copy video info from the activity folder and then paste into the download folder and presto - I downloaded the video onto my computer. I really miss this capability!

Download activity is found by clicking on the gadget on the right:

Is there any way to bring back the font type and background of Safari reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

Is there any way to bring back the font type and background of Safari Reader from iOS6 in to the iOS7 ? I really miss it, the new design is awful, simple and has now class at all.

I agree with you, many things in the ios 6.x were more elegant. The reader was the most one of them. I think the ios7 wants to be the windows 8.

We were wondering how you stop some apps from running with out deleting them something like a task manager and in my settings im missing the application button in it how do i get it back and stop some apps its making it run really slow

how do you stop apps with out deleting them i have looked for something like a task manager and nothing and researched about it and it says to go into your settings and then click applications but i dont have one can someone please help[ me thank you

Double click the Home button. The bottom row shows the recently used apps. Touch and hold the app until they all start to wiggle then tap the circled minus sign by apps you want to remove. Press the Home button to return to normal.
However, that is recently used apps not apps doing something. Some apps will do things all the time/periodically like checking for Notification, new mail. Yu can turn those off in the apps themselves.
Just what are you trying to accomplish?

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Need help with a calculated column - is there any way to reference a value in the current row?

Hey guys,
I'm a bit of a DAX newbie, and I'm running into a block. I'm creating a Power View report about IT tickets. We are going to be creating a cube to automate the data soon, I'm currently working with a flat Excel Data Table of data to demonstrate the Power
View reporting capabilities to the team. I need the default display to show the top 4-5 items basked on the Ticket Count. The three applicable columns I'm using are the TicketID, the ContactReason, and the AssetCategory - all three are
text. One slide will show the top five Contact Reasons by Ticket Count, and the other will show the top five Categories by Ticket Count. The users will see this default view, but will be able to change it to see differently ranked items or can clear the
ranking slicer altogether.
What I've accomplished so far is to create the Calculated Field [Ticket Count] = COUNTA(Table1[TicketID])
And 2 other calculated fields:
[Contact Rank] = RANKX(ALL(Table1[ContactReason]),[Ticket Count],,,DENSE)
[Asset Rank] = RANKX(ALL(Table1[AssetCategory]),[Ticket Count],,,DENSE)
If I were creating a Pivot Table, this would be great. These fields calculate everything the right way. The problem is, I need to have a Rank slicer on each slide and the calculation by itself contains no data - with no data, there's nothing to slice. I
realized I need to actually have columns of data so I can create a slicer. I need each row of the table to show the same [Contact Rank] for every instance of a particular ContactReason (and the same for the [Asset Rank] and AssetCategory).
The RANKX formulas pasted into the Calculated Column section only show a value of 1 - with no Pivot table summarizing the fields, it's counting each row's ticket once, giving every line the tied Rank of #1.
I've solved the problem in Excel by creating 2 Pivot Tables on a separate sheet that have the data field and the calculated field for ContactRason and AssetCategory. Then on my Excel Data Table, I've added two columns that do a VLOOKUP and pull over a the
Calculated Rank from each Pivot Table that match the ContactReason and AssetCategory fields. This works on the flat Excel Data Table now, but will not be a solutions when we start pulling the data from the cube (and there is no flat table).
What I think I need is an Expression for the RANKX formula that can give me, for each row, the count of all of the times a ContactReason shows up in an entire column. There's only about 100,000 lines of data and each ContactReason or AssetCategory
may show up several thousand times. But if I can get the expression to return that count, then the RANKX formula should work in the Column. If it wasn't a DAX formula, I'd use a COUNTIF and say 'Count the entire ContactReason column anytime it's equal to the
ContactReason on THIS row', but in DAX I don't know how to reference a single value in a row. I've tried the CALCULATE() formula, but it seems like the filter needs a specific value, and doesn't work on a dynamic "cell" value.
Any help would be greatly appreciated! (I hope it all makes sense!)

If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

First Cell value in the first row of the structure not getting displayed

Hi Friends,
We've got one structure at rows level, there as per our requirement i've taken around 12 "New Selections", that's ok i'm getting everthing fine, but whatever the new selection i put on the top of that structure in that, the First Cell Value for the first column not getting displayed...
I'm really wondering, this is the first time that i'm facing this kind of problem... what might be the reason & what is the solution for that...
just awaiting for your inputs...
Regards,
Balaji Reddy K.

There is no declarative way to do this as the table rows are stamped. This means there is no way to can access a value like (row+1).attributename
So there is some coding needed. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html which might help you to implement your case.
Timo

How can I get Numbers to return the first row in a group of VLOOKUP query results instead of last one?

I'm trying to query from one table (call it Table1) a batch of rows in another table (Table2) using VLOOKUP on a date specified in the first table (Table1). My problem is it's returning the last incident in Table2 of the requested date instead of the first incident. This really breaks the OFFSET scheme I'd like to use to collect the rest of the items for that date. Is there some way to compel VLOOKUP to return the first row of query results, not the last?
NOTE: I see I've asked this before, but forgot to go back and look at responses given. It's been a while and I've limped along until now with the way things were. I'm actually trying to delete this questions, so if you see it, ignore it. I suppose if someone can tell me real quick how to delete a stupid question, that might be helpful.

you cannot delete a post yourself. You can flag the post an request a moderator remove.

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

Files disappeared from library, "missing" files not really missing

I had a folder with 3 files in different formats for each image. These were imported several days ago, grouped into stacks, captioned, tagged, etc. and synced to the files. They continued to exist in the library some time afterward, but today when I opened lightroom all of the jpg versions of all of the images and all 3 formats of one image in particular had vanished from the library. It did not claim that it could not find them on disk (and in fact the files *do* still exist on disk right where they should), they just didn't show up. I was able to re-import all of the jpg images without trouble, but for the other two formats of the one missing image, importing one of them fails because it "already exists in the library," and the other one is willing to import but then doesn't show up in the folder or the recently imported files list. When I try to synchronize the folder, it suggests that I import that file, but it never actually does. Since importing the jpgs, it also suggests that I remove 53 "missing" files, the number of jpgs imported. When I view the missing files in the library, it shows only 2 of the jpgs, one of which belongs with the files that will not import and neither of which is actually missing--they can both be synchronized just fine by clicking the little synchronize icon on the actual photo.
Does anyone know what's going on here and how I might be able to get the files that won't import back into the library? And how to be sure that files won't just go away on their own again?
Edit: to be clear, missing versions of files were definitely not stacked with the other ones and the "don't import duplicates" box was not checked when re-importing the ones that won't re-import

I managed to get the photos that wouldn't import back in by deleting them directly out of the database and then reimporting them into lightroom. I'm a little concerned that they disappeared in the library view in the first place, though. Does this sort of thing happen often, and under what circumstances? I'm still in the free trial period and was very close to buying the program, but now I'm not so sure. If I'm using an application to manage my photos, I want to know that it's actually managing all of the photos I put into it and not randomly forgetting about them.
I'm still having the not-really-missing files problem, though. I think it may actually be because they got associated as "sidecar" files somehow and are now in there twice, once as the sidecar file and another time as a separate jpg image. I'm not really sure why only one of them shows up in the missing images view, I think it might be because I edited that one so it's in a slightly different state from the others? If there are any tips on how to resolve that state, I'm all ears, I'd like it to stop telling me I have 53 missing files when I don't.

Get only the first row for duplicate data

Hello,
I have the following situation...
I have a table called employees with column (re, name, function) where "re" is the primary key.
I have to import data inside this table using an xml file, the problem is that some employees can be repeated inside this xml, that means, I'll have repeated "re"'s, and this columns is primary key of my table.
To workaround, I've created a table called employees_tmp that has the same structed as employees, but without the constraint of primary key, on this way I can import the xml data inside the table employees_tmp.
What I need now is copy the data from employees_tmp to employess, but for the cases where "re" is repeated, I just want to copy the first row found.
Just an example:
EMPLOYEES_TMP
RE NAME FUNCTION
0987 GABRIEL ANALYST
0987 GABRIEL MANAGER
0978 RANIERI ANALYST
0875 RICHARD VICE-PRESIDENT
I want to copy the data to make employees looks like
EMPLOYEES
RE NAME FUNCTION
0987 GABRIEL ANALYST
0978 RANIERI ANALYST
0875 RICHARD VICE-PRESIDENT
How could I do this?
I really appreciate any help.
Thanks

Try,
SELECT re, NAME, FUNCTION
FROM (SELECT re,
               NAME,
               FUNCTION,
               ROW_NUMBER () OVER (PARTITION BY re ORDER BY NAME) rn
          FROM employees_tmp)
WHERE rn = 1G.

Really missing the 7-row

Similar Messages

Maybe you are looking for