Really need help on finding whats wrong with my internet please
Ok I now have Sky BB (not fibre normal). I have a black Sky hub, connected to my Apple Time Capsule (the flat type, think its 3rd Gen), the TC is in bridge mode, the Sky hub has wireless switched off.
I also use Powerline adapters from the TC to my iMac, also use numerous WiFi devices, iPhones, Apple TVs, iPads etc.
I keep getting intermittent "blips", drop outs, no connection, slow use etc, and I just can't get to the bottom of it. Really really appreciate some solid advice and help. Overtime its dropped (or I think it is), I can check Airport utility on my iPhone or iMac and shows all green, and internet connected, physically iy shows green to. The sky hi also shows connection on the hub, and if I goto the home page.
I've just had a drop/connection loss now, I've been into the logs on sky hub and nothing is shown, only form yesterday. I can't check the TC logs now, I have the old Airport utility that did used to show you, but it won't open now on 10.10.3.
I've reset powerline etc, but it doesn't seem to be that, as although iPhone shows connected to WiFi it doesnt connect to internet.
I believe the actual Sky end is ok, I goto into the sky hub home page 192.168.0.1, and shows connected, Sky have ran tests etc and all seems ok. What I'm wondering is if its the TC? I've had a few times now where the TC says has to restart backup as been a problem
thanks
Why down grade the firmware? What will that do/give me?
On the older units i find the earlier firmware more reliable.. The 7.6.4 introduced a number of new functions that work poorly on older AE and TC so it is simple to revert to older firmware and see..
It is a 3min exercise.. and might do nothing.. but you are trying to prove where an issue is.. this is part of that testing.
If I factory restore what will that do? I take it I can't use the backup settings to restore afterwards?
All routers need the occasional reset. Wrong settings creep in.. and particularly in situations where there is power outages or OS that works poorly (read Yosemite) then strange and wonderful things happen.
A backup of settings is only useful if it was taken before the problems started.. did you?? If not forget it and configure from scratch.. that is a key part of getting things to work.
Not sure what is meant by the use LAN port instead, thought I had to use the WAN if I connect it to my Sky hub?
When the TC is bridged.. it has no WAN port. There is no routing.. but I have found the LAN ports are more reliable than the WAN port.
With you saying about "only lasts a while" is it worth buying a new shape one refurbished from Apple? Are the newer shape any better reliability?
I would not buy a refurbished.. I doubt this model is understood very well and its issues happen in some situations and not others.. I think a lot of them are put back in stock without any sort of repair. They are tested .. found working and hence resold.. but the situation in people's homes is not a test lab. When people connect them to modems and routers that the device has issues with it fails again.
I find it hard to recommend the new one.. especially as it has now been out more than a year.. and firmware has not improved.
It is about refresh time and I would wait to see if a new one is coming.
If you need wireless buy a wireless router.. if you need backup use a local USB drive.
Repair of the TC is complicated.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I figured this out long ago so they were already showing up with issues within 3 years.. if you get 4 or more years out of modern equipment.. that is beyond its design lifespan.
Similar Messages
-
I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet
There is nothing anyone can do.
Sorry.
You will have to keep looking for it -
i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help
The users guide says:
Spotlight searches the following:
Contacts—All content
Apps—Titles
Music—Names of songs, artists, and albums, and the titles of podcasts and videos
Podcasts—Titles
Videos—Titles
Audiobooks—Titles
Notes—Text of notes
Calendar (Events)—Event titles, invitees, locations, and notes
Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
Reminders—Titles
Messages—Names and text of messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsynce all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Need help finding whats wrong with my servlet
I've been trying to create a simple login page following the tutorial found http://www.roseindia.net/mysql/loginauthentication.shtml
There is a single JSP (AuthenticateLogin.jsp) and a servlet (LoginAuthentication.java). Basically what has to happen is the user enters the login information in the JSP which sends these info to the servlet. The servlet checks whether the username and password exist in the table and if they do it displays the user if not it says to that the username and/or password is invalid. I'm using IntelliJ IDEA as the IDE, Tomcat as the application server and MySQL 5.0.18 for the database. I'm also using Ant as a build tool.
The following are my code:
AuthenticateLogin.jsp
<head>
<title>Login Page</title>
<script type="text/javascript">
function validate() {
var user = document.frm.user
var pass = document.frm.pass
if ((user == null) || (user == "")) {
alert("Please enter a username")
user.focus()
return false
if ((pass == null) || (pass == "")) {
alert("Please enter a password")
pass.focus()
return false
</script>
</head>
<body>
<form name="frm" action="LoginAuthentication" method="post" onsubmit="return validate()">
Name: <input type="text" name="user"/>
<br/>
Password: <input type="text" name="pass" />
<br />
<input type="submit" value="Sign in"/>
<input type="reset" value="Reset"/>
</form>
</body>
</html>{code}
LoginAuthentication.java
{code:java}import java.io.*;*
*import java.sql.*;
import javax.servlet.*;*
*import javax.servlet.http.*;
public class LoginAuthentication extends HttpServlet {
private ServletConfig config;
public void init (ServletConfig config) throws ServletException {
this.config = config;
public void doPost (HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException{
PrintWriter out = response.getWriter();
String connectionUrl = "jdbc:mysql://192.168.0.95:3306/loginTester";
Connection connection = null;
ResultSet rs;
String userName = new String("");
String passwrd = new String("");
response.setContentType("text/html");
try {
Class.forName("com.mysql.jdbc.Driver");
connection = DriverManager.getConnection(connectionUrl, "root", "");
String sql = "select user, password from user";
Statement s = connection.createStatement();
s.executeQuery(sql);
rs = s.getResultSet();
while (rs.next()) {
userName = rs.getString("user");
passwrd = rs.getString("password");
rs.close();
s.close();
} catch (Exception e){
System.out.println("Exception thrown: ["+e+"}");
if (userName.equals(request.getParameter("user")) && passwrd.equals(request.getParameter("pass"))) {
// response.sendRedirect("http://localhost:8080/xplanner_reports/");
out.println("Hello"+userName);
} else {
out.println("Please enter a valid username and password");
out.println("<a href='AuthenticateLogin.jsp'><br/>Login again</a>");
}{code}
web.xml
{code:java}<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5">
<welcome-file-list>
<welcome-file>AuthenticateLogin.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>LoginAuthentication</servlet-name>
<servlet-class>LoginAuthentication</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>LoginAuthentication</servlet-name>
<url-pattern>/LoginAuthentication</url-pattern>
</servlet-mapping>
</web-app>
</web-app>{code}
The problem I'm facing is the validation (checking whether the username and password match to those in the database) isn't working properly. No matter what I enter as the username and password (even if it is the correct pair) it always shows as my username and/or password is invalid. When I check the tomcat (catalina) log the following entry was found:
{code:java}Exception thrown: [java.lang.ClassNotFoundException: com.mysql.jdbc.Driver}{code}
Could someone please show me what I could be doing wrong here? It would be a great help. Spent a day trying to figure this out :no:How could I add it to my classpath from Idea?
By the way the following is my build.xml (ant build file)
<project name="LoginForm" basedir=".">
<property name="app.name" value="LoginForm"/>
<property name="src.dir" location="src"/>
<property name="build.dir" location="build"/>
<property name="build.webinf.classes.dir" location="${build.dir}/WEB-INF/classes"/>
<property name="web.dir" location="web"/>
<property name="dist.dir" location="dist"/>
<property name="lib.dir" location="lib"/>
<property name="tomcat.home" location="/home/ruzaik/software/tomcat/apache-tomcat-5.5.20"/>
<property name="tomcat.url" value="http://localhost:8080/manager"></property>
<property name="tomcat.username" value="tomcat"/>
<property name="tomcat.passward" value="tomcat"/>
<property name="appserver.deploy.dir" location="${tomcat.url}/webapps"></property>
<property name="war.file" value="${app.name}.war"/>
<import file="${tomcat.home}/bin/catalina-tasks.xml"/>
<path id="project.classpath">
<dirset dir="${build.dir}"/>
<fileset dir="${lib.dir}">
<include name="**/*.jar"/>
</fileset>
</path>
<target name="clean" description="Cleans directories">
<delete dir="${build.dir}"/>
<delete dir="${dist.dir}"/>
</target>
<target name="init" depends="clean" description="Creates directories">
<mkdir dir="${build.dir}"/>
<mkdir dir="${build.webinf.classes.dir}"/>
<mkdir dir="${dist.dir}" />
</target>
<target name="compile" depends="init">
<javac srcdir="${src.dir}" destdir="${build.webinf.classes.dir}">
<classpath refid="project.classpath"/>
</javac>
</target>
<target name="copy" description=" : Copy the content of web in to build directoy">
<copy todir="${build.dir}" preservelastmodified="yes" overwrite="yes">
<fileset dir="${web.dir}">
<include name="**/*"/>
<exclude name="**/*.bak"/>
</fileset>
</copy>
</target>
<target name="war" depends="compile, copy" description=" : Create a war file for deploying">
<jar destfile="${dist.dir}/${app.name}.war" update="false" compress="true">
<fileset dir="${build.dir}">
<include name="**/*"/>
</fileset>
</jar>
</target>
<target name="install">
<deploy url="${tomcat.url}" username="tomcat" password="tomcat" path="/LoginForm"
war="${dist.dir}/${war.file}">
</deploy>
</target>
<target name="uninstall">
<undeploy url="${tomcat.url}" username="tomcat" password="tomcat" path="/LoginForm">
</undeploy>
</target>
</project>and my directory structure could be found here http://img407.imageshack.us/img407/1594/tempf.png
I think I"ve added it to the classpath. -
Need HELP to find Eclipse IDE with Oracle Portlet Factory.
I want to start to develop oracle portlets without coding and I found that Oracle Portlet Factory is right technology for that. But I do not the best place to get info about installation of Oracle Portlet Factory based in Eclipse or somewhere else.
Hi,
Error might have occurred due to selecting only the OSM related modules.
Try again by selecting all the "Oracle Communications Service Studio Modules" and it should work.
Thanks,
BR, Harry -
NO clue whats wrong with my Nano
I have no clue what is wrong with my first gen ipod nano. When i plug it in to my laptop (dell inspiron 6400) to a USB port it freezes up and all i see is the do not disconect sign. I look in itunes and my ipods not there to eject, so 1) i cant eject my ipod safely and 2) i cant get any songs on to it, because its not reconized by my computer. I have no idea whats wrong with it. Please please please help me.
When i got up to step 2, it said it was charging, i had the big battery icon flashing, so i know it wasnt frozen (wich was a first) but then i disconnected it and pluged it back in but it froze once i pluged it in and it did not appear in itunes.
-
I need help about my database! Please help me!!! I really need help!!!!!
Hey I done my database code through JCreator but it did not seemed to work. This is the buy ticket page whereby you buy the movie ticket online that i am creating.
The java file is called BuyTextBox.java with database by microsoft access called buy.db .
I will want the information that the user entered saved be stored in the database. I tried but it did not seemed to work!
Here is the code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
import java.io.*;
import java.util.*;
import java.sql.*;
public class BuyTextBox extends JPanel implements ActionListener {
//Instance Variables
private String FirstName = "fn";
private String LastName = "ln";
private String Address = "addr";
private String ContactNumber ="1234567";
private String CreditCardNumber ="111111";
private String Email="[email protected]";
private int NumberTickets;
public String getFirstName(){
return FirstName;
public String getLastName(){
return LastName;
public String getAddress(){
return Address;
public String getContactNumber(){
return ContactNumber;
public String getCreditCardNumber(){
return CreditCardNumber;
public String getEmail(){
return Email;
public int getNumberTickets(){
return NumberTickets;
private JLabel movieLabel = new JLabel("Select movie ticket:");
private JLabel blankLabel = new JLabel(" ");
private JLabel blank2Label = new JLabel(" ");
private JLabel blank3Label = new JLabel(" ");
private JLabel blank4Label = new JLabel(" ");
private JLabel blank5Label = new JLabel(" ");
private JLabel FirstNameLabel = new JLabel("First Name:");
private JTextField FirstNameTextField = new JTextField();
private JLabel LastNameLabel = new JLabel("Last Name:");
private JTextField LastNameTextField = new JTextField();
private JLabel AddressLabel = new JLabel("Address:");
private JTextArea AddressTextArea = new JTextArea();
private JLabel contactLabel = new JLabel("Contact number:");
private JTextField ContactNumberTextField = new JTextField();
private JLabel creditLabel = new JLabel("Credit card number:");
private JTextField CreditCardNumberTextField = new JTextField();
private JLabel emailLabel = new JLabel("Email:");
private JTextField EmailTextField = new JTextField();
private JLabel numberLabel = new JLabel("Enter number of tickets:");
private JTextField NumberTextField = new JTextField();
private JButton saveButton;
private JButton resetButton;
public BuyTextBox() {
JPanel inputPanel=new JPanel();
inputPanel.setBorder(new TitledBorder("Please enter your informations:"));
inputPanel.setLayout(new GridLayout(0,4,40,40));
inputPanel.add(FirstNameLabel);
inputPanel.add(FirstNameTextField);
inputPanel.add(LastNameLabel);
inputPanel.add(LastNameTextField);
inputPanel.add(AddressLabel);
inputPanel.add(AddressTextArea);
inputPanel.add(contactLabel);
inputPanel.add(ContactNumberTextField);
inputPanel.add(creditLabel);
inputPanel.add(CreditCardNumberTextField);
inputPanel.add(emailLabel);
inputPanel.add(EmailTextField);
inputPanel.add(movieLabel);
inputPanel.add(new Checkbox("Chicken Little"));
inputPanel.add(new Checkbox("King Kong"));
inputPanel.add(new Checkbox("Elizabeth Town"));
inputPanel.add(blankLabel);
inputPanel.add(new Checkbox("Curse Of Were Rabbit"));
inputPanel.add(new Checkbox("Derailed"));
inputPanel.add(new Checkbox("In Her Shoes"));
inputPanel.add(new Checkbox("Proved"));
inputPanel.add(new Checkbox("Family Stone"));
inputPanel.add(new Checkbox("TinMine"));
inputPanel.add(new Checkbox("Narnia"));
inputPanel.add(blank2Label);
inputPanel.add(numberLabel);
inputPanel.add(NumberTextField);
JPanel confirmPanel=new JPanel();
saveButton=new JButton("Save");
resetButton=new JButton("Reset");
confirmPanel.add(saveButton);
confirmPanel.add(resetButton);
setLayout(new BorderLayout());
add(inputPanel, BorderLayout.PAGE_START);
add(confirmPanel, BorderLayout.PAGE_END);
resetButton.addActionListener(this);
saveButton.addActionListener(this);
public void actionPerformed(ActionEvent e) {
if (e.getSource() == resetButton)
resetButtonClicked();
else if (e.getSource() == saveButton)
saveButtonClicked();
public BuyTextBox(String aName){
name = aName;
public boolean insertDetails(){
boolean success = false;
DBController db = new DBController();
// buy db = new buy();
db.setUp("buy");
String sql = "INSERT INTO buy(FirstName,LastName, Address,ContactNumber,CreditCardNumber,Email,NumberTickets)";
sql += "values("+FirstName+", '"+LastName+"', "+Address+"', "+ContactNumber+
"', "+CreditCardNumber+"', "+Email+"', "+NumberTickets+");";
db.updateRequest(sql);
db.terminate();
success = true;
return success;
private void resetButtonClicked()
FirstNameTextField.setText("");
private void saveButtonClicked()
FirstName = FirstNameTextField.getText().trim();
LastName = LastNameTextField.getText().trim();
Address = AddressTextArea.getText().trim();
ContactNumber = ContactNumberTextField.getText().trim();
CreditCardNumber = CreditCardNumberTextField.getText().trim();
Email = EmailTextField.getText().trim();
NumberTickets = NumberTextField.getText().trim();
if (FirstName.length() == 0)
JOptionPane.showMessageDialog(this ," Name cannot be blank" , "Invalid Field", JOptionPane.ERROR_MESSAGE);
else
JOptionPane.showMessageDialog(this, "Record added.", "Confirmation", JOptionPane.INFORMATION_MESSAGE);
if (insertDetails())
System.out.println("DB Update OK");
else
System.out.println("DB Update Failed");
public static void main(String args[]) {
JFrame app=new JFrame();
//Container contentPane = getContentPane ();
BuyTextBox p=new BuyTextBox();
app.getContentPane().add(p);
app.setTitle ("Buy tickets ");
app.setSize(1050,740);
app.setBackground (new Color(0,160,198));
app.setResizable (false);
app.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
app.setVisible(true);
If you know whats wrong with the code, please teach me what to do to make my databse successful!and now that one try to hack my icound but i set password so strong cuz it associat me just i little bit you will check me cuz i have your product all i used to use my username nerdseery but ha hacked me all every email addrese i used username nerdsery but now i must changed to nerrdsurery
-
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.
-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this? -
Need help understanding whats wrong with ASP checking for empty fields.
Can anyone tell me whats wrong with these if statements: If i
sumbit the
form providing everything except the dream_inscript field it
gives me this
error:
=================================================
Microsoft OLE DB Provider for ODBC Drivers error '80040e57'
[Microsoft][ODBC Microsoft Access Driver]Invalid string or
buffer length
/purch_confirm_mail.asp, line 67
=================================================
If i submit the form and provide just that field along with
the first 4
which are automatically passed from the DB the form submits
fine and no
problem.. I know it has something to do with my If
Statements..
Basically i want to check the 4 fields:
dream_inscript If this one is -1 then pass N/A to the db
dream_price If dream_inscript <> -1 then pass 45 to the
db
dream_comm if dream_comm is empty then pass N/A to the db
custom_inscript if custom_inscript is empty then pass N/A to
the db
custom_wanted if this is Y then pass 45 to the db
custom_comm if this is empty then pass N/A to the db
MM_editCmd.CommandText = "INSERT INTO tbMailOrders
(item_number,
item_summary, item_price, shipping_cost, dream_price,
dream_inscript,
dream_comm, custom_comm, custom_price, video_wanted,
video_price,
grandtotal, cs_name, pp_email, c_email) VALUES (?, ?, ?, ?,
MM_editCmd.Prepared = true
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202,
1, 10, Request.Form("item_number")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param2", 202,
1, 255, Request.Form("item_summary")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param3", 202,
1, 10, Request.Form("itemprice")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param4", 202,
1, 10, Request.Form("shippingcost")) ' adVarWChar
If cStr(Request.Form("dream_inscript"))<> "-1" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param5", 202, 1,
10, "45") ' adVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param5", 202,
1, 10, "0.00") ' adVarWChar
End If
If cStr(Request.Form("dream_inscript"))<> "-1" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param6", 203, 1,
1073741823, Request.Form("dream_inscript")) ' adLongVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param6", 203,
1, 1073741823, "N/A") ' adLongVarWChar
End If
If Len(cStr(Request.Form("dream_comm")))= "0" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param7", 203,
1, 1073741823, "N/A") ' adLongVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param7", 203,
1, 1073741823, Request.Form("dream_comm")) ' adLongVarWChar
End If
If Len(cStr(Request.Form("custom_inscript")))= "0" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param8", 203,
1, 1073741823, "N/A") ' adLongVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param8", 203, 1,
1073741823, Request.Form("custom_inscript")) ' adLongVarWChar
End If
If Request.Form("custom_wanted")= "Y" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param9", 202,
1, 10, "45") ' adVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param9", 202,
1, 10, "0.00") ' adVarWChar
End If
If Request.Form("video_wanted")= "Y" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param10", 202,
1, 10, "Yes") ' adVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param10", 202,
1, 10, "No") ' adVarWChar
End If
If Request.Form("video_wanted")= "Y" Then
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param11", 202, 1,
10, "15") ' adVarWChar
Else
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param11", 202,
1, 10, 0.00) ' adVarWChar
End If
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param12", 202,
1, 10, Request.Form("grand")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param13", 202,
1, 255, Request.Form("name")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param14", 202,
1, 255, Request.Form("email")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param15", 202,
1, 255, Request.Form("email2")) ' adVarWChar
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
ASP, SQL2005, DW8 VBScript, Accessissue corrected.
ASP, SQL2005, DW8 VBScript, Visual Studio 2005, Visual Studio
2008
"Daniel" <[email protected]> wrote in message
news:[email protected]...
> Can anyone tell me whats wrong with these if statements:
If i sumbit the
> form providing everything except the dream_inscript
field it gives me this
> error:
> =================================================
> Microsoft OLE DB Provider for ODBC Drivers error
'80040e57'
> [Microsoft][ODBC Microsoft Access Driver]Invalid string
or buffer length
>
> /purch_confirm_mail.asp, line 67
> =================================================
> If i submit the form and provide just that field along
with the first 4
> which are automatically passed from the DB the form
submits fine and no
> problem.. I know it has something to do with my If
Statements..
>
> Basically i want to check the 4 fields:
>
> dream_inscript If this one is -1 then pass N/A to the db
> dream_price If dream_inscript <> -1 then pass 45
to the db
> dream_comm if dream_comm is empty then pass N/A to the
db
>
> custom_inscript if custom_inscript is empty then pass
N/A to the db
> custom_wanted if this is Y then pass 45 to the db
> custom_comm if this is empty then pass N/A to the db
>
>
>
>
> MM_editCmd.CommandText = "INSERT INTO tbMailOrders
(item_number,
> item_summary, item_price, shipping_cost, dream_price,
dream_inscript,
> dream_comm, custom_comm, custom_price, video_wanted,
video_price,
> grandtotal, cs_name, pp_email, c_email) VALUES (?, ?, ?,
> ?, ?, ?, ?, ?, ?)"
> MM_editCmd.Prepared = true
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202,
> 1, 10, Request.Form("item_number")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param2", 202,
> 1, 255, Request.Form("item_summary")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param3", 202,
> 1, 10, Request.Form("itemprice")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param4", 202,
> 1, 10, Request.Form("shippingcost")) ' adVarWChar
> If cStr(Request.Form("dream_inscript"))<> "-1"
Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param5", 202, 1,
> 10, "45") ' adVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param5", 202,
> 1, 10, "0.00") ' adVarWChar
> End If
> If cStr(Request.Form("dream_inscript"))<> "-1"
Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param6", 203, 1,
> 1073741823, Request.Form("dream_inscript")) '
adLongVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param6", 203,
> 1, 1073741823, "N/A") ' adLongVarWChar
> End If
> If Len(cStr(Request.Form("dream_comm")))= "0" Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param7", 203,
> 1, 1073741823, "N/A") ' adLongVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param7", 203,
> 1, 1073741823, Request.Form("dream_comm")) '
adLongVarWChar
> End If
> If Len(cStr(Request.Form("custom_inscript")))= "0" Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param8", 203,
> 1, 1073741823, "N/A") ' adLongVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param8", 203, 1,
> 1073741823, Request.Form("custom_inscript")) '
adLongVarWChar
> End If
> If Request.Form("custom_wanted")= "Y" Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param9", 202,
> 1, 10, "45") ' adVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param9", 202,
> 1, 10, "0.00") ' adVarWChar
> End If
> If Request.Form("video_wanted")= "Y" Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param10", 202,
> 1, 10, "Yes") ' adVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param10", 202,
> 1, 10, "No") ' adVarWChar
> End If
> If Request.Form("video_wanted")= "Y" Then
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param11", 202, 1,
> 10, "15") ' adVarWChar
> Else
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param11", 202,
> 1, 10, 0.00) ' adVarWChar
> End If
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param12", 202,
> 1, 10, Request.Form("grand")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param13", 202,
> 1, 255, Request.Form("name")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param14", 202,
> 1, 255, Request.Form("email")) ' adVarWChar
> MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param15", 202,
> 1, 255, Request.Form("email2")) ' adVarWChar
> MM_editCmd.Execute
> MM_editCmd.ActiveConnection.Close
>
> --
> ************************************************
> ASP, SQL2005, DW8 VBScript, Access
> -
Really need help with MSI R7970-2PMD3GD5/OC:(
Greetings to all,
I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.Quote from: Svet on 24-August-12, 18:13:26
what PC case you use exactly?
have you tried to open PC case side door and to retest?
Hi,
it's open case. If i close it the temps get even worse:(
They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
П.С. Поздрав Свет
да ли сте ви са наших простора да не куцам на енглеском? -
'Easy Set-up' Option - Problem with edit canvas/windows - really need help!
Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated! -
I REALLY NEED HELP WITH MY CURVE 9300'S WIFI!
HI !
i have a blackberry curve 9300, OS5. I got it secondhand. It worked really great, but the problem started when I've done that thing within the host routing table. Though my wifi is connected, I can't use the internet. whenever I tried the BB browser and any other application (e.g. facebook, opera mini, etc.) i get a message that says 'i am not in an area that supports blah blah...' or 'unable to connect to internet please try again later'. I checked the browser under browser config and it is set to my local network provider. i changed it to hotspot browser, saved it. But whenever I go back it also goes back to my local network provider. i have tried almost EVERY troubleshooting I've read on this forums and in other forums but still no luck. The problem worsened when I did a security wipe on the emails, contacts, etc.
-APN settings are disabled
-default browser set to hotspot browser
-firewall disabled
-data services are on
Everyone said that it has nothing to do with that activation enterprise so I did not configured it after wiping.
I also tried doing a hard reboot (pulling the battery out and waiting for 5 minutes before turning it on) but it will only fix the problem for sometime and it will go back again.
Calling my network provider would just suggest to get a plan when in fact, I was able to use the device's wifi well before without any plan.
I don't want to upgrade my BB to OS6 coz it easily drains the battery of device and I cannot afford doing that because I go out a lot.
I also tried changing my sim card and network provider but wasn't successful.
I also tried deleting the name of my local network provider in the service book under options.
What do you think could be the problem? Any suggestions? I really, really, REALLY, need help.
PLEASE ! THANK YOU VERY MUCH IN ADVANCE!Hi miochan984,
Welcome to the support community!
A supported data plan from your mobile network provider may actually be required to use the Facebook for BlackBerry smartphones application as well as the browser. I would recommend verifying with them which services they support over a Wi-Fi connection without a data plan.
Let me know if you have any other questions.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Hi I really need help with re-activating my little sisters iPad
Hi
I really need help with re-activating my little sisters iPad, i already set it up a couple of months ago when i bought it,but unfortunately she disabled it by forgetting her password. i followed the necessary steps to reset it again, when the iPad came back on and we put the apple id and password it kept refusing it, i even reset the password, which sent the verification the email account, i followed the steps to reset, But then i noticed the message at the top of the activate screen with the message “this iPad is currently linked to the following apple ID _______ with a a few hidden dashes, but at the end of the email it says co.uk, but the problem is the email ends with .com. I have no idea how this happened, and its driving me insane and my little sister only used her iPad for a month before this happened. for some reason the the iPad email address ends in co.uk when the actual email ends with .com
I also set up the software find my ipad
Please helpYou will probably have to contact Apple to see if they can help.
Contact Us -
I need help to remove the wrong email on my Iphone. the represnter who set up my phone put in the wrong email, and now I can't down loand apps on my phone because the apple ID does not match
So sign out of the Apple ID under Settings > iTunes & App Store, then sign in with your own.
Maybe you are looking for
-
Help with logging in to MacBook Pro.
I Got a MacBook Pro today and i was abler to log in fine. But when I changed the password to something personal to me so no one could get in it, after entering it, I wAsnt able to log in. So I put in the installation disk and reset everything and cha
-
How do I remove my own copyright from a photo
How do i remove my own copyright and or watermark from a photo please
-
My daughter and I both have an Iphone 4S. We use Friend finder to locate each other when we are in different parts of the state. It worked wonderfully for like a year, until we downloaded IOS 7, and now it barely works. Whenever she drives out of
-
Drag Files from iTunes to iOS apps disappeared
I'm using iTunes 12.0, iOS 8.1.1, and Windows 8.1. Previously when my iPad was attached to the computer via USB there was a panel in iTunes that would allow me to access files on the computer and copy them to the iOS apps on my iPad which supported
-
Help changing AS3 -- AS2 please
I was following a tutorial in AS3 with a MouseEvent but really want to use it in AS2. There is an Input Text box named boxOne that a user enters their name You click on myButton and in then in boxTwo should appear the test "Welcome to our class" and