Really Need Help ! (Two things)

First off, i am trying to open a project in Final Cut, but can't find the project file itself. I go into finder, type the name, and I find all the sequences, all the clips and everything, but there is nothing I can specifically open. I really need to be able to open this project, so any help would be appreciated.
Also, whenever I try to export anything I get an "Error : Out of Disc Space" message. I have checked all my scratch discs, and all of that and made sure it was going to my hard drive that has 300 some GB on it. I have also tried trashing the preferences without any success.
plEASE HELP!

FCE project files are normally located in your +Final Cut Express Documents+ folder. If it's not there, it could be anywhere. You might be better off looking in your +Final Cut Express Documents > Autosave Vault+ folder for a backup copy of your project file - if you do that, copy the project file to another folder (preferably your Final Cut Express Documents folder) and rename it before you open it.)
+" ... whenever I try to export anything I get an "Error : Out of Disc Space" message ..."+
This usually indicates that the drive you are trying to export to is formatted as FAT32. It needs to be formatted as Mac OS Extended. Don't reformat the drive unless you backup anything you need to keep first. Reformatting erases the entire drive.
A lot more specific details from you would be helpful.

Similar Messages

I really need help - two problems are occuring

when trying to sync my ipod, i get the following error msg. "ipod cannot be synced, the required file cannot be located"
also, I am unable to downloan itunes 8

1. You probably can't, but some people have been able to redownload their songs for free; you can use this form to submit a request.
2. Follow the instructions in this article.
(17886)

REALLY need help about two accounts, 1 Mac

I really really need help.
Back ground. I have a bought my daughter an itouch 4th gen for Christmas. I have set up a new user account on the macbook pro, Set her up a new Apple ID, but I want to share the music. So i did what was said, moved the media folder to a shared folder.
Got the music shared onto her itunes libary, although when I added to Library it transfered all my apps, which I deleted.
I did a trial run of downloading an app, and its not showing in the library? WHY??
Please can someone help me before it goes out the window.
Thanks

If you want a true streaming server, you'll need to be running software such as QuickTime Streaming Server. QTSS only comes with Mac OS X Server, but there is an open-source version called Darwin Streaming Server available for Mac OS X, Linux, and Windows 2000/2003 Server.
To get started learning how to stream your content, start with the Streaming & Delivery tutorials on this web page.
Hope this helps.

Really need help with MSI R7970-2PMD3GD5/OC:(

Greetings to all,
I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.

Quote from: Svet on 24-August-12, 18:13:26
what PC case you use exactly?
have you tried to open PC case side door and to retest?
Hi,
it's open case. If i close it the temps get even worse:(
They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
П.С. Поздрав Свет
да ли сте ви са наших простора да не куцам на енглеском?

All Web Dynpros are down... I really need help.

Hi. I really need help because our portal has serious problems since yesterday. All of them seem to be related to missing Jar files.
After installing several SCA files using SDM (Software Deployment Manager) yesterday, all Web Dynpros stopped working (even SAP Dynpros such as User Management).
I've been looking for solutions all day and can't find anything. Any help would be greatly appreciated. Here are the errors I get:
All homemode Dynpros show the following error:
java.lang.NoClassDefFoundError
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:168)
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:178)
    at com.sap.tc.webdynpro.services.sal.sl.core.SystemLandscapeInternal.getJCOClientConnectionUnMapped(SystemLandscapeInternal.java:62)
    at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:77)
    at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:437)
    ... 61 more
For SAP's Dynpros, I get the following error:
   java.lang.NoSuchMethodError: com.sap.portal.activitydatacollector.ICollectorHook.isActive()Z
    at com.sap.portal.activityreport.ActivityReportHookInterface.updateADCAfterInteraction(ActivityReportHookInterface.java:176)
    at com.sap.portal.activityreport.ActivityReportHookInterface.onAfterInteraction(ActivityReportHookInterface.java:145)
    at com.sap.portal.activityreport.wdp.InternalActivityReportHookInterface.onAfterInteraction(InternalActivityReportHookInterface.java:128)
    at com.sap.portal.activityreport.wdp.InternalActivityReportHookInterface$External.onAfterInteraction(InternalActivityReportHookInterface.java:167)
    at com.sap.portal.pb.hook.PortalHooksManager.updateHooks(PortalHooksManager.java:58)
    ... 34 more

I do have access to it.
Here are two examples of errors/warnings we got a lot during the upgrade:
Caused by: com.sap.engine.frame.core.locking.LockException: Cannot lock [2010112417061085000000portail......................3814850, DEPLOY_LOCK_AREA, sap.com/com.sap.lcr, X]; it is in use by the same owner. In case of lock mode "R" the lock propagation failed, because the optimistic lock is gone.
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Already started operation with application sap.com/com.sap.lcr in the cluster. No other operation with this application is allowed at the moment..
Another thing that could help you understand my problem: when I log into Portal and go to Content Admin / Web Dynpro / Main JCO destinations, even if my destination's status is set to OK (green light), I get this Java error if I click on "test":
   java.lang.NoClassDefFoundError
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection (SystemLandscapeFactory.java:150)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.getJCOClientConnection(WDSystemLandscape.java:30)
    at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.onActionTestConnection(JCOConnectionsDetails.java:226)
    at com.sap.tc.webdynpro.tools.explorer.wdp.InternalJCOConnectionsDetails.wdInvokeEventHandler(InternalJCOConnectionsDetails.java:303)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
Thanks again.
Edited by: Mathieu St-Gelais on Nov 29, 2010 3:13 PM

Hello, i really need help. I had just updated my iphone 3gs to 6.0.1, and after I updated, it won't activate.

Hello, i really need help. I had just updated my iphone 3gs to i.o.s. 6.0.1, and after I updated, it won't activate.I tried it in itunes and it always says " We cannot activate your iphone at this time..." and when I activate using Wi-Fi, it says, "Your iPhone cannot be activated because the activation server is temporarily unavailable." I could swear that my Wi-Fi is fine, and my Itunes is on the latest version. Is this a bad thing or does this normally occurs? Can I still fix this ? I'm so desperate to use my iphone cause I use it everyday for personal purposes. I sure would appreciate any tip or help . PLSSSS ! Thank you for that wonderful being that can help.

Do not take it to a third party repair shop - downgrading causes problems and voids your warranty.
I had to unlock it so that i could really use it as a phone.
And that is the root of the problem. Unless you had your carrier unlock it, it was hacked and cannot be legitimately activated. Even if you don't care about warranty or problems, downgrading simply will not help an activation issue.

'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!

Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!

I REALLY NEED HELP WITH MY CURVE 9300'S WIFI!

HI !
i have a blackberry curve 9300, OS5. I got it secondhand. It worked really great, but the problem started when I've done that thing within the host routing table. Though my wifi is connected, I can't use the internet. whenever I tried the BB browser and any other application (e.g. facebook, opera mini, etc.) i get a message that says 'i am not in an area that supports blah blah...' or 'unable to connect to internet please try again later'. I checked the browser under browser config and it is set to my local network provider. i changed it to hotspot browser, saved it. But whenever I go back it also goes back to my local network provider. i have tried almost EVERY troubleshooting I've read on this forums and in other forums but still no luck. The problem worsened when I did a security wipe on the emails, contacts, etc.
-APN settings are disabled
-default browser set to hotspot browser
-firewall disabled
-data services are on
Everyone said that it has nothing to do with that activation enterprise so I did not configured it after wiping.
I also tried doing a hard reboot (pulling the battery out and waiting for 5 minutes before turning it on) but it will only fix the problem for sometime and it will go back again.
Calling my network provider would just suggest to get a plan when in fact, I was able to use the device's wifi well before without any plan.
I don't want to upgrade my BB to OS6 coz it easily drains the battery of device and I cannot afford doing that because I go out a lot.
I also tried changing my sim card and network provider but wasn't successful.
I also tried deleting the name of my local network provider in the service book under options.
What do you think could be the problem? Any suggestions? I really, really, REALLY, need help.
PLEASE ! THANK YOU VERY MUCH IN ADVANCE!

Hi miochan984,
Welcome to the support community!
A supported data plan from your mobile network provider may actually be required to use the Facebook for BlackBerry smartphones application as well as the browser. I would recommend verifying with them which services they support over a Wi-Fi connection without a data plan.
Let me know if you have any other questions.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Where's a smart person when you need one? My iphoto just will not open for no reason at all(I REALLY NEED HELP)

I have not done anything strange like changing something in my computer or IPhoto. One day it just decided not to open. I dont have my photos backed up from IPhoto and I really need the photos on there and Iphoto itself to graduate in two weeks.
I will click on Iphoto and it'll jump twice, open but it will be totally blank white and immediately have the spinning rainbow wheel and it never loads. I'll then put my mouse over the icona nd it'll say "IPhoto not responding" and everytime I have to force quit. I really dont understand what happened.
I have googled for days variations of "My Iphoto will not open" and none of what people are saying helps at all because all of them have done something to mess up their apps. I really really need help, please, its got to be something so simple because I didnt change anything on my computer.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Really need help (motor control using labview)

hi all readers,
im new beginner. really need help for my project. i've been assigned to monitor/control motor using labview 8.5 (using NI DAQmx). the problem is, the techinician told me that i cant use 3phase motor with this card. things that i need to displayed using labview is :
torque
power
current
voltage
speed
really appreciated if readers can help me with this:
wut type of motor shud i use that compatible with NI DAQmx
thanks a lot.

Hi fauziana,
NI data acquisition devices are primarily designed to take measurements, so it's a good idea to measure the signals that you have mentioned with a DAQ device.
You also can use DAQ devices for control tasks, but for reliable and deterministic control behavioryou typically need to use a real-time operating system (not Windows!). If you want to learn more about the pros and cons of using DAQ devices for motion control tasks, please refer to these threads. Still for standard motion control tasks it's much more efficient in terms of development time, to use a dedicated motion control device for the motion control part of your application.
In general the control part is independant from the motor type, as these devices only generate control signals (+/- 10 V). There are many power drives available, that accept this type of control signal and you should select your motor according to the requirements of your application.
For a more detailed system consulting, please contact your local NI branch. To select the products that fit best to your application requirements a face to face discussion is much more efficient than a discussion forum thread, because there are a lot of parameters that need to be taken into consideration. If you tell me in which country you are living, I can provide appropriate contact data to you.
Thanks and kind regards,
Jochen Klier
National Instruments

My Iphone 4 goes off after tried to instul ios 7.0. I 'm onlu seeing the sing of iTune and USB plug right on the phon's screen. I really need help because I all i got

My Iphone 4 shuted down after tried to instul ios 7.0. I 'm only seeing the sing of iTune and USB plug right on the phon's screen
I really need help because that's only phone i got.

Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

My songs can't play..I REALLY NEED HELP..

my songs somehow,cannot be played..i was in the bus listening,den suddenly my ipod,30GB ipod vid,stop playing,so i thought was low batt,so i wen to checked,but i was wrong,it got hanged or something..,it jus stopped there,eventhough,they play sign is on..
So i tried to off and on my ipod again,same thing,i shuffle my songs again,still to no avail,it jus wouldn't play at all,so i tried playing my vids,well it was okie..
I REALLY NEED HELP..!!

try these steps here http://www.apple.com/support/ipod/five_rs/
I had the same problem, i restored mine now it works fine (restoring erases all contents on iPod)

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

open an app and click help>activate.
if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Error in deploying my spring web app, really need help?!

I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
And I get this error while deploying.
Can anyone tell me where it is comming from and what i should do to fix it?
If you need any more info please ask that too, I really need help..
I have browsed all over the internet, but found nothing really helpful..
In my browser I get a Http status 500 error:
exception
javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
root cause
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
And this is what I see in the console:
10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 4312 ms
10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
log4j:WARN Please initialize the log4j system properly.
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /SCWCD threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/187 config=null
10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3578 ms
Many Thanks in advance for any help!!
Grz Barbera

hi istvan,
we are also migrating from websphere to netweaver.
But in spring framework we r facing problems.
We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
clent-config.xml file contains :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
<beans>
     <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
          <property name="location">
               <value>conf/service-client/client.properties</value>
          </property>
     </bean></beans>
But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
Wat is the problem ?
Kindly help.
We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
Regards,
sagar.

I have an iPod Nano 7th generation, and I keep getting an error saying that iTunes could not recognize my device. I have tried nearly everything,except I don't have admin rights on the computer, and really need help.

I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.

Hi Dawson777,
Thanks for visiting Apple Support Communities.
It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Best Regards,
Jeremy

In testing 9 and X, "Compare Docs" we have a critical issue and really need help!

For years we have used Acrobat 7 to do PDF compares and we love it! However, the company recently advised we must upgrade to 9 and then eventually to X. In testing 9 and X, Compare Docs we have a critical issue and really need help. Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs; however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running! Version 7 runs the compare of the same PDFs beautifully, pointing out all the differences, as usual! Has this every happen to anyone? Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results? Why is 9 treating these non-scanned PDF docs as such? Thanks so much for any help or insight you can give me on this issue!

(Moved the discussion to the correct forum)

Really Need Help ! (Two things)

Similar Messages

Maybe you are looking for