Really need some !!HELP!! ALMOST 6 MONTHS WITH OUT BURNING A CD
I've posted before about my problem but but i still have not gotten an answer. This might be my last atempt to get any help before i end up taking my laptop to a repair shop so here we go.
I've recently ran a diagnostic with i tunes and here it is:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
TOSHIBA Satellite A75
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), ASAPIW2K (6.0.2.0), Pfc (2.5.0.204), MxlW2k (1.1.0.120), sscdbhk5 (1.0.0.1), Cdr4_xp (6.2.0.132),
UpperFilters: CDRDRV (6.0.0.0), Cdralw2k (6.2.0.132), GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9000 IGP\ATI MOBILITY RADEON 9000 IGP
IDE\DiskFUJITSUMHU2100AT______________________00000008
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-820S________________1.50___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomVOBID__InstantDrive_CD_14_, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: MATSHITA DVD-RAM UJ-820S, Rev 1.50
Audio CD in drive.
Found 11 songs on CD, playing time 33:12 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:20:15
Track 3, start time 05:07:42
Track 4, start time 06:13:12
Track 5, start time 08:31:30
Track 6, start time 13:17:17
Track 7, start time 17:34:35
Track 8, start time 20:47:57
Track 9, start time 23:22:25
Track 10, start time 25:16:60
Track 11, start time 28:56:22
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 8 12.
The drive DVDRW speeds are: 4 8 12.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
it apears to be something wrong with drive E but in the properties it says its working perfectly.
Every time i try to burn a cd i get the blue screen error.
i hade version 7 of i tunes kept getting the same thing, so i went back to 5.3 but still the same thing. It also happens when i try to burn a cd with nero, i have WMP but don't use it. so now i really hope to get an answer or i have no other choice but to take it to a repair shop. SO !!PLEASE HELP ME!!
no problems about the delay.
the 0x8E is reasonably generic. so let's try proceeding on two fronts.
1st front: we'll get a minidump to the Apple Engineers for a look
(the minidump can help identify the driver that seems to be causing the issue here.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
2nd front: checking on a few possibilities ourselves while waiting for feedback on the minidump
(a) device filter conflicts: blue screens with itunes while burning can be caused by device filter conflicts (i've seen 0x8Es before in cases of conflicts with old Roxio products). so perhaps try the techniques from the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters
(b) malware:
malware is a known cause of 0x8Es. try downloading fresh definitions and running vigorous virus and spyware scans. if your security software providers offer them, try running online scans too. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
if your security software providers don't offer online scans, try running the Symantec online virus check. (apologies in advance ... it takes an eternity to complete.)
Symantec Security Check
Similar Messages
-
I really need some help!!! ipod touch 4th gen 8g help needed
my ipod touch 4th gen wont let me turn on it's wifi, use video camera(although i can take pics with both cameras), play music/ no sound or bluetooth, it was dropped into a toilet a long time ago, and i dont have the money to buy new parts, plus its a hand-me-down... any suggestions, i noticed that the motherboard had some corrosion near the wifi antenna's solder location so i wiped it off, and cleaned everything with a dry napkin but i think there are some capaceters ruined. i put it back together and that didnt help. also the wifi is greyed out, there is no internet status bars whatsoever. its not slow, and the apps work just fine. please please help, i've been wanting an ipod for over two years now, and i finally got it, just not the way i wanted it... HELP!
could it be possible its only the motherboard that needs replacing, i'm good with tech' but i dont quite understand the ipod yet
-
I am the biggest "Newb" on this site, and I really need some help please..
Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AMAs this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it. -
Storage: I got a 32gig iPad for Christmas - I really need some help.
Storage: I got a 32gig iPad for Christmas, and literally I am already down to 2 gigs of storage left. I believe my iPad is a 4th generation, and currently on my device I only have a 10 apps, 6 photos, 3 personal family videos 10mins in length each, and about 10 disney channel tv shows for my kids. I also have my work email, but I set it to only go back two weeks.
I am not sure what I am doing to eat through this much space so quickly. I realized after downloading 4 tv shows for my daughter I was getting HD, so I did change the other 6 to SD which I know takes less space. However it hasn't really helped. Recently I started using the camera to take a few short movies of my kids 3 videos about ten mins in length each and that ate through space in no time.
My iPad is 32gigs but really only started with 28 gigs capacity.
Is there something I can do? Am I doing something wrong? Sorry I am not the most technically inclined, but a co-worker of mine has an older iPad with thousands of pics, hundreds of songs, plenty of movies, at least 20 apps, etc and her 32 gig iPad still has 12 gigs left. She has WAY more stuff on hers than mine.
I really appreciate any help someone can provide. Thank You.Ok. Do you know if I delete a show from iTunes on my device can I still redownload it for free? Seems that 13.7 gigs taken up are those disney channel shows. If I delete them I can always just redownload them no?
I appreciate your help. Thanks. -
Problems with the address book server! Really need some help here!
Hello everyone!
for about some time now, we're having some troubbles with the address book server located on our Mac Pro Server running SL Server. The connected clients somehow show multiple entries of groups, contacts and everything else address book can show. Sometimes you see one group or contact about 20-30 times or even more.
How can the addressbook server on SL Server be configured that these faults won't show up again. With this present, using address book server is useless. As far as my knowledge goes, I've tried everything I can. I deleted the address book account set up on each client, readded it, but no help. I stopped the address book server on the Mac pro, but no help either.
For your further information: we're connecting 14 clients. Moste of the rum Lion, three run ML and several iDevices connect via WiFi.
Please help me, as this really is frustrating!
Looking forward for your help.
Regards,
Moritzjames211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move. -
Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones
Hello,
I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6. I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio. It's as if no audio is going back and forth. When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.8.1 192.168.8.19
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
multilink bundle-name authenticated
isdn switch-type primary-ni
crypto pki server cme_root
database level complete
grant auto
lifetime certificate 7305
lifetime ca-certificate 7305
crypto pki token default removal timeout 0
crypto pki trustpoint cme_root
enrollment url http://192.168.8.1:80
revocation-check none
rsakeypair cme_root
crypto pki trustpoint cme_cert
enrollment url http://192.168.8.1:80
revocation-check none
crypto pki trustpoint TP-self-signed-2736782807
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2736782807
revocation-check none
rsakeypair TP-self-signed-2736782807
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
vpn-group 1
vpn-gateway 1 https://66.111.111.111/SSLVPNphone
vpn-trustpoint 1 trustpoint cme_cert leaf
vpn-profile 1
host-id-check disable
voice class codec 1
codec preference 1 g711ulaw
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice translation-rule 1
rule 1 /9400/ /502/
rule 2 /9405/ /215/
rule 3 /9410/ /500/
voice translation-rule 2
rule 1 /.*/ /541999999/
voice translation-rule 100
rule 1 /^9/ // type any unknown plan any isdn
voice translation-profile Inbound_Calls_To_CUE
translate called 1
voice translation-profile InternationalType
translate called 100
voice translation-profile Local-CLID
translate calling 2
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module sm 1
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-12,24
class-map type inspect match-any sslvpn
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-all router-access
match access-group name router-access
policy-map type inspect firewall-policy
class type inspect sslvpn
inspect
class class-default
drop
policy-map type inspect outside-to-router-policy
class type inspect router-access
inspect
class class-default
drop
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
service-policy type inspect firewall-policy
zone-pair security untrusted-to-trusted source internet destination trusted
service-policy type inspect outside-to-router-policy
interface Loopback0
ip address 192.168.17.1 255.255.248.0
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
zone-member security internet
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0
zone-member security trusted
ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
tftp-server flash:apps31.9-3-1ES26.sbn
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/1
associate ccm 1 priority 1
associate profile 1 register CME-CONF
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 4
associate application SCCP
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 10 pots
description Incoming Calls To AA
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
dial-peer voice 20 pots
description local 10 digit dialing
translation-profile outgoing Local-CLID
destination-pattern 9[2-9].........
incoming called-number .
port 0/0/0:23
forward-digits 10
dial-peer voice 30 pots
description long distance dialing
translation-profile outgoing Local-CLID
destination-pattern 91..........
incoming called-number .
port 0/0/0:23
forward-digits 11
dial-peer voice 40 pots
description 911
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 45 pots
description 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
dial-peer voice 50 pots
description international dialing
translation-profile outgoing InternationalType
destination-pattern 9T
incoming called-number .
port 0/0/0:23
dial-peer voice 650 pots
huntstop
destination-pattern 650
fax rate disable
port 0/3/0
gatekeeper
shutdown
telephony-service
protocol mode ipv4
sdspfarm units 5
sdspfarm tag 1 CME-CONF
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-3-1SR4-1S.loads
load 7936 cmterm_7936.3-3-21-0.bin
load 7942 SCCP42.9-3-1SR4-1S.loads
load 7962 SCCP42.9-4-2-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
softkeys connected Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
button-layout 7931 2
ephone-template 2
softkeys idle Dnd Gpickup Pickup Mobility
softkeys connected Hold Park Confrn Mobility Trnsfer TrnsfVM
button-layout 7931 2
ephone-dn 1 dual-line
number 200
label Lisa
name Lisa Ziomkowsky
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 2 dual-line
number 201
label Dylan
name Dylan Elmer
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 3 dual-line
number 202
label Kimberly
name Kimberly Krueger
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 4 dual-line
number 203
label Randy
name Randy Buresh
mobility
snr calling-number local
snr 915035042317 delay 5 timeout 15 cfwd-noan 500
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 5 dual-line
number 204
label Mark
name Mark McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 6 dual-line
number 205
label Susan
name Susan Sundin
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 7 dual-line
number 206
label Rebecca
name Rebecca Vaught
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 8 dual-line
number 207
label Ronnda
name Ronnda Daniels
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 9 dual-line
number 208
label Matthew
name Matthew Creswell
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 10 dual-line
number 209
label Nate
name Nate Couture
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 11 dual-line
number 210
label Sarah
name Sarah Smith
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 12 dual-line
number 211
label Janis
name Janis McFerren
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 13 dual-line
number 212
label Val
name Val McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 14 dual-line
number 213
label Shorty
name Arlene Haugen
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 15 dual-line
number 214
label Ruta
name Ruta Wells
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 16 dual-line
number 215
label 5415489405
name OWH Sales
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 17 dual-line
number 216
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 18 dual-line
number 217
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 19 dual-line
number 218
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 20 dual-line
number 219
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 21 dual-line
number 220
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 22 dual-line
number 221
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 23 dual-line
number 222
label Pam
name Pam Buresh
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 24 dual-line
number 223
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 25 dual-line
number 224
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 26 dual-line
number 225
label Elaine
name Elaine Mahan
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 27 octo-line
number 250
label Shipping
name Shipping
ephone-dn 28 dual-line
number 251
label Eli
name Eli Nourse
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 29 dual-line
number 252
ephone-dn 30 dual-line
number 253
ephone-dn 31 octo-line
number 100
label Customer Service
name Customer Service
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 32 octo-line
number 101
label Sales
name Sales
call-forward busy 214
call-forward noan 214 timeout 12
ephone-dn 33 dual-line
number 260
label Conference Room
name Conference Room
call-forward busy 100
call-forward noan 100 timeout 12
ephone-dn 100
number 300
park-slot timeout 20 limit 2 recall
description Park Slot For All Company
ephone-dn 101
number 301
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 102
number 302
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 103
number 700
name All Company Paging
paging ip 239.1.1.10 port 2000
ephone-dn 104
number 8000...
mwi on
ephone-dn 105
number 8001...
mwi off
ephone-dn 106 octo-line
number A00
description ad-hoc conferencing
conference ad-hoc
ephone-dn 107 octo-line
number A01
description ad-hoc conferencing
conference ad-hoc
ephone-dn 108 octo-line
number A02
description ad-hoc conferencing
conference ad-hoc
ephone 1
device-security-mode none
mac-address 001F.CA34.88AE
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:2 2:31
ephone 2
device-security-mode none
mac-address 001F.CA34.8A03
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:12
ephone 3
device-security-mode none
mac-address 001F.CA34.898B
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 4
device-security-mode none
mac-address 001F.CA34.893F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 5
device-security-mode none
mac-address 001F.CA34.8A71
ephone-template 1
max-calls-per-button 2
username "susan"
paging-dn 103
type 7931
button 1:6
ephone 6
device-security-mode none
mac-address 001F.CA34.8871
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:7 2:31 3:32
ephone 7
device-security-mode none
mac-address 001F.CA34.8998
ephone-template 1
max-calls-per-button 2
username "matthew"
paging-dn 103
type 7931
button 1:9
ephone 8
device-security-mode none
mac-address 001F.CA36.8787
ephone-template 1
max-calls-per-button 2
username "nate"
paging-dn 103
type 7931
button 1:10
ephone 9
device-security-mode none
mac-address 001F.CA34.8805
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:5
ephone 10
device-security-mode none
mac-address 001F.CA34.880C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:14
ephone 11
device-security-mode none
mac-address 001F.CA34.8935
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:3
ephone 12
device-security-mode none
mac-address 001F.CA34.8995
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:8 2:31
ephone 13
device-security-mode none
mac-address 0021.5504.1796
ephone-template 2
max-calls-per-button 2
paging-dn 103
type 7931
button 1:4
ephone 14
device-security-mode none
mac-address 001F.CA34.88F7
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:23
ephone 15
device-security-mode none
mac-address 001F.CA34.8894
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:26
ephone 16
device-security-mode none
mac-address 001F.CA34.8869
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:28 2:27
ephone 17
device-security-mode none
mac-address 001F.CA34.885F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:11
ephone 18
device-security-mode none
mac-address 001F.CA34.893C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 19
device-security-mode none
mac-address 001F.CA34.8873
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 20
device-security-mode none
mac-address A456.3040.B7DD
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:13
ephone 21
device-security-mode none
mac-address A456.30BA.5474
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:15 2:16 3:32
ephone 22
device-security-mode none
mac-address A456.3040.B72E
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:1
ephone 23
device-security-mode none
mac-address 00E0.75F3.D1D9
paging-dn 103
type 7936
button 1:33
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 216.228.192.69
webvpn gateway sslvpn_gw
ip address 66.111.111.111 port 443
ssl encryption 3des-sha1 aes-sha1
ssl trustpoint cme_cert
inservice
webvpn context sslvpn_context
ssl encryption 3des-sha1 aes-sha1
ssl authenticate verify all
policy group SSLVPNphone
functions svc-enabled
hide-url-bar
svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
svc default-domain "bendbroadband.com"
virtual-template 1
default-group-policy SSLVPNphone
gateway sslvpn_gw domain SSLVPNphone
authentication certificate
ca trustpoint cme_root
inservice
endI think your ACL could be the culprit.
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly. If they work fine then we know that we need to open som ports there.
Please remember to select a correct answer and rate helpful posts -
I really need some help with rendering
I am creating a video for a client, and he is going to stream it through his own player. He requires the video to play using dimentions of 430 x 242.
He wants to keep the file sizes as small as possible.
I am currently creating his videos using a 1280 x 720 composition, as this is the same aspect ratio as his specific dimentions.
I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB, and I'm also trying MPEG4 but getting blurry, washed out results that look nothing like the preview in AE. I've tried Flash and it stutters.
My questions:
1. Should I render in 1280 x 720 and just ask him to re-size them through his player? (I assume most players can do this?) or should I render to the dimensions of 430 x 242? He doesn't have too much knowledge of video.
2. What is the best file format and settings?
3. Is it possible to re-set the render option defaults? I've played around with all of the setting so much that I can't remember how each file format was set before I started this project. I've tried re-starting AE but it still leaves me with the same settings as when I closed it.
Every time I post a question like this I get people telling me to 'read the basics' or 'we get asked this time and time again etc'. Please note that I have a disability and am finding this very tough - if it isn't too much trouble I'd just appriciate someone giving the information so that I can learn in from here. It will need to be explained simply as yes I am fairly new to AE.
I just can't seem to find anything which works. MPEG4's are giving me a suitable file size but then look blurred and washed out.
Many thanks for any help.First question: What player is your client going to be using to play this? Everything depends on that. For example, if he's going to be playing the file using QuickTime Player, then the answer is pretty easy: create a QuickTime movie (.mov).
> Should I render in 1280 x 720 and just ask him to re-size them through his player?
No, not if you've been told that he wants a 430x242 file. If you make a big movie (in terms of frame dimensions) and have him resize it, then you're going to create much larger files than necessary.
> I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB
The QuickTime movie (.mov) format is just a container format. It can contain video encoded using any of a large number of codecs, with any of a range of quality settings. The default is a lossless compression (using the Animation codec) that creates perfect images at the expense of larger files.
After you've added your composition to the render queue, choose QuickTime as your format in the Output Module Settings dialog box and then click the Format Options button in the Output Module Settings dialog box. You can choose a compression type, set quality, et cetera. People seem to like the H.264 codec for a good balance of size and quality.
See "Encoding and compression options for movies" for more information. -
REALLY need some help with transparent background
This is really starting to bug me now as I have searched the forums and the web for hours and still cannot get this to work.
I am creating a simple one page site at http://freeselfhelpebooks.org/50ofTheBestPDProducts/
I want the header and footer image to have a transparent background with only the text showing, so that the text shows on the background image.
So far I have created the header image with a transparent background Modify > Canvas > Canvas Colour > Transparent all good so far. I have added some text. Then I save as file type PNG 32, however I still get the background as white as you can see above.
I have tried PNG 8 with alpha transparency, no transparency but to no avail. I have even downloaded Photoshop CS6 and have the same issues. What am I doing wrong here?First of all, your header graphic is fine; it's a transparent PNG. Your footer is a JPEG, which does not support transparency, so you need to resave that file into a different format (like PNG32, or PNG8 w/alpha transparency).
As I was trying to suggest, if you're confused about your graphics, check them in a graphics editor or viewer, not in a web page inside a web browser. Web development is a complex beast, and a lot can go wrong.
In the HTML of your web page, there is a class called "content" being applied to tables and images. This class has a background image being applied to it, which is responsible for the white background on those elements. -
REALLY need some help with my problem (Netgear and...
Hi everyone,
Well... where to start really.
This morning around 5am, I lost connection to the net, yet my Netgear (DG834 wired) showed an uptime of 117 hours, so it showed no reboot. It seems my IP profile was raised (As it was low before for my sync).
I had no reboot it seems, but my noise margin went up to 9db from 6db. This is fine as it means I should be getting around 6.5meg IP profile going by the sync. Anyway (This is complicated to explain but bear with me).
My current IP profile is now 7.15K. I know this will come down now to match my sync at 9db (Which should be 6.5meg).
What is happening, is that any change made to my broadband (Like my IP profile being raised this morning) means that I cannot then connect to the net, and anything connected (Like Xbox Live etc) disconnects, even though the router shows no disconnect, and all the lights are green.
The only way for me to reconnect to the internet then is to MANUALLY reboot the router, because no matter what website etc I try to view, it just says "Looking for..." in the bottom left corner of the browser, and I can't connect to anything like Xbox Live etc.
Can anyone explain why this is happening with the Netgear router? Shouldn't any change, like an IP profile increase not affect my broadband connection? It seems whenever a change is made BT side, I have to then manually reboot the router to get online.
I wondered if anyone with a netgear, or anyone with some knowledge on this could tell me why. This could save me a lot of headaches down the line and stop me having noise margin raised etc because I have to manually reboot the router to get it working again. I just thought that any change, like an increase in IP profile etc, shouldn't affect my connnection and force me to have to manually reboot the router to get it up and running again.
I hope you understood what I was trying to explain, and thanks in advance for any responses.Hi John. Thanks for responding.
I have been through the options on the router and can't find one that says auto connect at all.
It seems the router is not disconnecting though (Like this morning when the IP profile raised), as the uptime on both WAN and LAN were showing 117 hours, and all green lights were on, on the router. It's just when a change on the BT side is made, it won't let me get on the net until I do a manual reboot. It's all very baffling to me really.
I tried googling my problem to no avail also. -
Really need some help with this low earpiece volume issue.
I'm taking my iPhone to an Apple Store Genius tomorrow to check out the low volume in the earpiece. Has anyone else taken their phone in to an Apple Store and had the issue addressed? Are Geniuses just saying it is within spec? Has Apple published an article on this?
I realize that people are also frustrated over the low speakerphone volume, but the low volume in the earpiece is particularly concerning.
While traveling down the road it is very difficult to hear the person on the other end of the phone when using just the earpiece (no earbuds, no BT headset). The volume while using the earbuds is plenty loud.
Can anyone please shed some new light on this? I have had my iPhone for one week and I've got a bad feeling in my gut that this is a hardware issue and the earpiece speaker can't go any louder. Bummer.
(Obviously, all of my volume settings are maxed out).
-JoeWhen the iPhones were first released, some people reported on their posts that they were able to take them to the Genius Bar, have a tech test it out, the tech would agree that the volume sounded low, and get their phone swapped right away. Unfortunately, there is no cut and dry answer because people have reported all sorts of different things- that the various software updates have fixed their volume, messing with the volume setting within iTunes, etc.
Personally, I think it is a software glitch. Why? I did this: I was playing the iPod without the earbuds and the volume was only set midrange. I covered the speaker on the bottom, cranked up the volume, and the sound coming out of the receiver was MUCH louder than it ever is when I am using the iPhone on a call. That to me indicates that the low volume it just a glitch that can be fixed, because it CAN obviously sound louder, just within a different function. Hope that makes sense.
Good luck tomorrow. -
HELPE ME OUT I REALLY NEED SOME HELP ON MOTION!!!
Hi I'm a high school student and I'm having a problem on motion. I need help on page 350 on step #6. Well my problem is that the lesson book tells me to select the sweep behavior and duplicate it, But there is no disclosure triangle to see the behaviors from. but the weird thing is that the the behavior is still working in the project when I play it, I just cant select it to duplicate it. so can you please help me. =)
Is it one of these?
http://www.google.com/search?client=opera&rls=en&q=motion3book&sourceid=opera&ie=utf-8&oe=utf-8
-DH -
Really need some help here to try and get Fios services in my building
I have been trying to convince my landlord for months to get Fios in the building. Here is a recent email exchange with him. Does anyone know if any of this is true, about the install damages? If it is true, then Verizon needs to get their act together!
Here is the email exchange.
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios? I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference. As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner. On top of that, I can't even watch HD
movies on demand. I've had TWC out here twice in the last four months and
every time they claim nothing is wrong. Its very frustrating. I'll do
almost anything I can to assist in this. Please let me know if you can do
anything.
Thank you as always!james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move. -
Please post anyhting you can to help me out, I've had this ipod for so long now... and recently itunes has just been being incredibly stupid for me. So here is how it all began, few days ago i connect my ipod... and it auto syncs it, even when that function was turned off... replacing all of my music with the ones in my library ( completely different) k few days later i turn it on again, i got a new HD recently since my old one busted and i redownload itunes v8 and i cant put songs on my ipod. I try and put one on and it automatically puts it in my normal Itunes library, then in the shuffle playlist all you see is this 1 song being duplicated 111 times.... so now this Itunes has deleted over 30 GB of info off my ipod... all movies and songs.. so its completely clean which really makes me angry. I can't fix this.. i dont know what this is.. please help me >< i have already tried reinstalling it, unless there is some sort of function in options to actually get my god dan songs on without them duplicated 100 times and get this ipod working agian please I need help... i've spent all my day trying to fix this.. thanks for your feedback
I know this is a IPod forum
Actually it's not. It's a forum for feedback about Apple's discussions forums, as the title implies. I suggest you post your message again here:
http://discussions.apple.com/forum.jspa?forumID=800 -
Fried RAM slot? Really need some help quick.
Hi guys. I have a major problem on my hands, that I hope you may be able to help me solve...
I have been working on a deadline for the production of a DVD that will be used as part of a mental health outreach program, and all had seemingly been going well, albeit slow with my OEM 512MB of RAM. I therefore decided to upgrade my RAM, first buying two 512MB DIMMS from macsolutuons, but these DIMMS produced crashes almost religiously after 5 or so minutes of uptime. After receiving a new shipment, ensuring they were from the same batch, all seemed to be well. The computer stayed up for days without crash - but when I put a load on it, namely video encoding to DV stream and to MPEG-2, poof - hard crashes.
I decided the RAM from macsolutions looked generic and suspected if I bought some real RAM I'd be safe. I purchased Viking RAM form macmall, three 512MB DIMMS, overnighted so I can make this deadline.
Here's the catch...
If I use all three DIMMS, the computer crashes in less than 5 minutes of uptime religiously. If I use two of them, the computer seems to stay up without problems, but when it sees a load like video conversion places on the system, it locks up. When I remove all RAM, so only one 512MB DIMM is present, I can encode video, and I don't seem to get crashes.
When I bought the machine from Apple some two years ago, it came with one 512MB DIMM. I'm only hypothesizing here, but is there a chance that I received a machine that has a RAM slot 1 that's fine, but there's something wrong with slot 2 (or even 2, 3, 4)? In theory, when just surfing or using standard apps, the first slot meets the RAM need, but when more RAM allocation is needed under hard processes, and the system feeds off of slots beyond #1, then I crash. MenuMeters is installed so I can monitor RAM use, and sure enough, I mainly get crashes as my used RAM approaches 480-500MB.
It's really urgent that I get to the bottom of this issue sooner than later, so I can finish this project to meet my deadline. Assuming slot 2 and so forth are bad, could I use a single 1GB DIMM module?
Any advice is greatly appreciated. If i can repay the favor in any way, I'd be glad to.I suspected the RAM as well, however when I use only one DIMM I get zero crashes. I have used each of the three DIMMS for one day each now, and no crashes, but the second I add another ino the configuration crashes occur. While I agree that cheap RAM is often the culprit, to me all signs point to a faulty slot 2.
I think I'll try getting a 1G RAM DIMM and only use slot 1 and see how that goes. Too bad, because I could really use more than 1G. -
GS60 2PE Hopeless really need some help here!!!
Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_TQuote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?
Maybe you are looking for
-
How to use functional module in crystal report
Hi all, I have imported my functional module to crystal report, but when i am previewing it i am not getting data in that, according to my functional module. how to run my functional module through crystal report. thanks in advance
-
Image Sequencing in Quick Time Pro
Since upgrading to Snow Leopard I have been unable to get Quick Time Pro to created an Image Sequence. I'm wondering if this is an issue created by Quick Time Pro being moved to its new location in Snow Leopard. Can anyone, who's recently upgraded, t
-
Want to get rid of annoying Media Center Deluxe II
during install, I foolishly asked it to run at startup. So, every time I boot up, the Media Center starts itself, and I have to shut it down. I cannot see anywhere that I can change it to only run when I want it to. Anyone know how to disable it fr
-
Unable to delete the dynamic attribute of a VO
Hi, I'm trying to create Dynamic attributes to the VO(view Object) in AMImpl.java with below code: Step 1: OAViewObjectImpl personCompVO = this.getEDPersonListVO(); String attrName = "Attribute Test"; personCompVO.addDynamicAttribute(attrName); Step2
-
I can't connect me iPhone to my hands free car kit
Hi I am having a problem connecting my iPhone to me car hands free I would be greatfull if someone could help me Thanks Allan