Really need some help been stuck all day on this

ok i'm abit confused I've been stuck on this problem all day and would appreciate your help
Classes Animal, tiger, lion etc all have constructors that take values and work
I'm trying to create an array of animals eg different types and display them all together using a toString
All ive managed to do was get a memoryaddress of the object
I have multiple classes eg abstract base class Animal Tiger extends Animal Lion extends Animal etc
Animal is abstract and has an abstract String toString method
All the derived classes have String toString methods that returns a description
how do i put them all together in arrays and call the string toString for all the different animals
public void displayMethod()
println(objectname);
I have tested the constructors for all classes using a single instance and they work it's just puting them all together in an array and then displaying all the different animals using each classes toString

You are nearly there!
for (int i=0; i<animals.length; i++)
  System.out.println(animals.toString());
}Note the use of animals.length in the for loop. This guarantees you only loop over the number of objects in the array and prevents an ArrayIndexOutOfBoundsException.
Edit: Huh? Where did your previous post go? It seems to have disappeared!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Ok I REALLY need some help

    Please post anyhting you can to help me out, I've had this ipod for so long now... and recently itunes has just been being incredibly stupid for me. So here is how it all began, few days ago i connect my ipod... and it auto syncs it, even when that function was turned off... replacing all of my music with the ones in my library ( completely different) k few days later i turn it on again, i got a new HD recently since my old one busted and i redownload itunes v8 and i cant put songs on my ipod. I try and put one on and it automatically puts it in my normal Itunes library, then in the shuffle playlist all you see is this 1 song being duplicated 111 times.... so now this Itunes has deleted over 30 GB of info off my ipod... all movies and songs.. so its completely clean which really makes me angry. I can't fix this.. i dont know what this is.. please help me >< i have already tried reinstalling it, unless there is some sort of function in options to actually get my god dan songs on without them duplicated 100 times and get this ipod working agian please I need help... i've spent all my day trying to fix this.. thanks for your feedback

    I know this is a IPod forum
    Actually it's not. It's a forum for feedback about Apple's discussions forums, as the title implies. I suggest you post your message again here:
    http://discussions.apple.com/forum.jspa?forumID=800

  • Fried RAM slot?  Really need some help quick.

    Hi guys. I have a major problem on my hands, that I hope you may be able to help me solve...
    I have been working on a deadline for the production of a DVD that will be used as part of a mental health outreach program, and all had seemingly been going well, albeit slow with my OEM 512MB of RAM. I therefore decided to upgrade my RAM, first buying two 512MB DIMMS from macsolutuons, but these DIMMS produced crashes almost religiously after 5 or so minutes of uptime. After receiving a new shipment, ensuring they were from the same batch, all seemed to be well. The computer stayed up for days without crash - but when I put a load on it, namely video encoding to DV stream and to MPEG-2, poof - hard crashes.
    I decided the RAM from macsolutions looked generic and suspected if I bought some real RAM I'd be safe. I purchased Viking RAM form macmall, three 512MB DIMMS, overnighted so I can make this deadline.
    Here's the catch...
    If I use all three DIMMS, the computer crashes in less than 5 minutes of uptime religiously. If I use two of them, the computer seems to stay up without problems, but when it sees a load like video conversion places on the system, it locks up. When I remove all RAM, so only one 512MB DIMM is present, I can encode video, and I don't seem to get crashes.
    When I bought the machine from Apple some two years ago, it came with one 512MB DIMM. I'm only hypothesizing here, but is there a chance that I received a machine that has a RAM slot 1 that's fine, but there's something wrong with slot 2 (or even 2, 3, 4)? In theory, when just surfing or using standard apps, the first slot meets the RAM need, but when more RAM allocation is needed under hard processes, and the system feeds off of slots beyond #1, then I crash. MenuMeters is installed so I can monitor RAM use, and sure enough, I mainly get crashes as my used RAM approaches 480-500MB.
    It's really urgent that I get to the bottom of this issue sooner than later, so I can finish this project to meet my deadline. Assuming slot 2 and so forth are bad, could I use a single 1GB DIMM module?
    Any advice is greatly appreciated. If i can repay the favor in any way, I'd be glad to.

    I suspected the RAM as well, however when I use only one DIMM I get zero crashes. I have used each of the three DIMMS for one day each now, and no crashes, but the second I add another ino the configuration crashes occur. While I agree that cheap RAM is often the culprit, to me all signs point to a faulty slot 2.
    I think I'll try getting a 1G RAM DIMM and only use slot 1 and see how that goes. Too bad, because I could really use more than 1G.

  • I am the biggest "Newb" on this site,  and I really need some help please..

    Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
    When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
    That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
    UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
    Edited by: user11033020 on Apr 14, 2009 11:41 AM

    As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
    Forms
    The Community Feedback forum isn't meant for product-related questions (as it says in the title).
    Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

  • Storage:  I got a 32gig iPad for Christmas - I really need some help.

    Storage:  I got a 32gig iPad for Christmas, and literally I am already down to 2 gigs of storage left.  I believe my iPad is a 4th generation, and currently on my device I only have a 10 apps, 6 photos, 3 personal family videos 10mins in length each, and about 10 disney channel tv shows for my kids.  I also have my work email, but I set it to only go back two weeks. 
    I am not sure what I am doing to eat through this much space so quickly.  I realized after downloading 4 tv shows for my daughter I was getting HD, so I did change the other 6 to SD which I know takes less space.  However it hasn't really helped.  Recently I started using the camera to take a few short movies of my kids 3 videos about ten mins in length each and that ate through space in no time.
    My iPad is 32gigs but really only started with 28 gigs capacity. 
    Is there something I can do?  Am I doing something wrong?  Sorry I am not the most technically inclined, but a co-worker of mine has an older iPad with thousands of pics, hundreds of songs, plenty of movies, at least 20 apps, etc and her 32 gig iPad still has 12 gigs left.  She has WAY more stuff on hers than mine.
    I really appreciate any help someone can provide.  Thank You.  

    Ok. Do you know if I delete a show from iTunes on my device can I still redownload it for free?  Seems that 13.7 gigs taken up are those disney channel shows.  If I delete them I can always just redownload them no? 
    I appreciate your help.  Thanks.

  • Getting error in Itunes need help been trying all day!

    I'm getting error when I connect my ipod to computer and bring up iTunes error states
    An Ipod has been detected, but it could not be identified properly. Please disconnect and reconnect iPod, then try again.
    if the problem persists, uninstall iTunes, then install iTunes again.
    I have uninstalled and reinstalled iTunes 4 times... made sure my software for computer was up to date... switched usb iPod cords.. restarted computer followed a forum with same error happening to someone else.. i'm getting no where was working great yesterday purchased some new songs and now wont work any help would be great I have no idea what im doing!!

    dana1322,
    I had the same problem and found a different response elsewhere in help that worked for me.  On Jan 29, 2014 at 3:37 PM "ifyoucouldpleasehelpme" asked this questions and got the following answer, which I tried and it solved the problem for me.
    You need to remove a number of Apple programs, not just iTunes and then when you install ITunes again it will install all the up to date software you need.
    a) Remove the following program in the following order:
    ITunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    5Apple Applications Support (I actually had 2 versions of this a 32 bit and a 64 bit - so I removed them both)
    b) Then restart your computer (I have Windows 8 on a Dell)
    c) Then install the latest version of iTunes (it installs all 5 of the programs above)
    d) Restart you computer.
    I hope it works for you as well as it did for me.
    Best of Luck
    Greg

  • I really need some help here....Please?

    Hey guys i have posted numerous threads regarding this issue but to no avail so im going to try one last time.
    Basically, Itunes works fine UNTIL i start to sync, Then it freezes up for a while then starts to sync a little bit...Then freezes and syncs a little bit..And so on..
    It took me 2 WHOLE days to sync 15 episodes of southpark.
    I transfered some movies and songs to my wifes laptop and it sync'd everything in around 50 seconds flat, So its now obvious that it must be my PC.
    I have USB 2 and i have 6 slots, I have tried ALL the different USB slots and it stays the same.
    Does anyone have ANY idea what this could be?
    I spoke to the guy who built my PC and he is changing the USB ports, He also said if that doesn't work he will change my motherboard..
    Is there a simple solution to this? Am i going to have to change Motherboard? ANY help would really be greatful.

    Hold your horses....
    Have you done some "rule out" testing? How do you know that the USBs are bad? How do you know that the MB is bad?
    1/ do all ports work when you plug a mouse in them?
    2/ what is a throughput when you plug a flash drive into these USBs (try 1 at a time) and copy a large file onto it? Test all the ports and compare speeds - are they at least 5-10 MB per sec? If yeah, then they are OK - system wise.
    If the USBs don't work and it's a PCI card, look for drivers and if no luck, buy a new card.
    If the USBs are built into the MB, then you have no other choice but to replace it, but only as the very last resort. Seems to me that he's trying ot hose you, my friend.....
    IN any case, it could be the drivers! Or..iTunes. Did you try to remove & reinstall?

  • GS60 2PE Hopeless really need some help here!!!

    Hey MSIer, I just did a complete wipe on my hard drive and  now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
    Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_T

    Quote from: Syrellaris;112053
    You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
    Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
    Quote from: JakeSully;112055
    Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
    I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?

  • Really need some help here!!

    Right chaps. Been with bt 16 months now(contract due to run out in dec) been paying my bills on time and not running up high bills..my monthly base cost is around 47 pound per month..
    Direct Debit is around 62 pound per month and ive just recieved an email saying its going p to 82 per month!!!!1
    how can my direct debit be nearly double my monthly bill when we hardlys use the phone (mobiles all the way)
    im on unlmited inf 2 (so no extra bb charges),never misses any bills,always bee on time.
    Im just stumped as to why my direct debit is going up and not down.
    Any help?

    Welcome to the forum. The Monthly Payment Plan strikes again! There's no point in trying to guess how the payments are determined as the system works (if that's the correct word) in unfathomable ways. It might be possible to get them amended, or even do it yourself in MyBT, but surely enough it will go wrong again at some point.
    Do yourself a favour and switch to monthly billing. It's very reliable in my experience, and once it's up and running you're simply billed each month for the next month's standing charges plus any one-offs (eg call charges) incurred during the previous month. There are a couple of downsides in that any substantial one-offs can't be spread over several months and that you can't change your direct debit date (which is fixed at 8 days after the bill) but that's a small price to pay for the reliability. If you switch while you are in credit, the balance will be set against subsequent bills until it's used up.
    You can click the white star next to this message if you think it was helpful.

  • Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones

    Hello,
    I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6.  I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
    The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio.  It's as if no audio is going back and forth.  When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
    Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
    clock timezone PST -8 0
    clock summer-time PST recurring
    network-clock-participate wic 0 
    network-clock-select 1 T1 0/0/0
    no ipv6 cef
    ip source-route
    ip cef
    ip dhcp excluded-address 192.168.8.1 192.168.8.19
    ip dhcp pool owhvoip
     network 192.168.8.0 255.255.248.0
     default-router 192.168.8.1 
     option 150 ip 192.168.8.1 
     lease 30
    multilink bundle-name authenticated
    isdn switch-type primary-ni
    crypto pki server cme_root
     database level complete
     grant auto
     lifetime certificate 7305
     lifetime ca-certificate 7305
    crypto pki token default removal timeout 0
    crypto pki trustpoint cme_root
     enrollment url http://192.168.8.1:80
     revocation-check none
     rsakeypair cme_root
    crypto pki trustpoint cme_cert
     enrollment url http://192.168.8.1:80
     revocation-check none
    crypto pki trustpoint TP-self-signed-2736782807
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-2736782807
     revocation-check none
     rsakeypair TP-self-signed-2736782807
    voice-card 0
     dspfarm
     dsp services dspfarm
    voice service voip
     allow-connections h323 to h323
     allow-connections h323 to sip
     allow-connections sip to h323
     allow-connections sip to sip
     fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
     vpn-group 1
      vpn-gateway 1 https://66.111.111.111/SSLVPNphone
      vpn-trustpoint 1 trustpoint cme_cert leaf
     vpn-profile 1
      host-id-check disable
    voice class codec 1
     codec preference 1 g711ulaw
    voice class custom-cptone jointone
     dualtone conference
      frequency 600 900
      cadence 300 150 300 100 300 50
    voice class custom-cptone leavetone
     dualtone conference
      frequency 400 800
      cadence 400 50 200 50 200 50
    voice translation-rule 1
     rule 1 /9400/ /502/
     rule 2 /9405/ /215/
     rule 3 /9410/ /500/
    voice translation-rule 2
     rule 1 /.*/ /541999999/
    voice translation-rule 100
     rule 1 /^9/ // type any unknown plan any isdn
    voice translation-profile Inbound_Calls_To_CUE
     translate called 1
    voice translation-profile InternationalType
     translate called 100
    voice translation-profile Local-CLID
     translate calling 2
    license udi pid CISCO2911/K9 sn FTX1641AHX3
    hw-module pvdm 0/0
    hw-module pvdm 0/1
    hw-module sm 1
    username routeradmin password 7 091649040910450B41
    username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
    redundancy
    controller T1 0/0/0
     cablelength long 0db
     pri-group timeslots 1-12,24
    class-map type inspect match-any sslvpn
     match protocol tcp
     match protocol udp
     match protocol icmp
    class-map type inspect match-all router-access
     match access-group name router-access
    policy-map type inspect firewall-policy
     class type inspect sslvpn
      inspect 
     class class-default
      drop
    policy-map type inspect outside-to-router-policy
     class type inspect router-access
      inspect 
     class class-default
      drop
    zone security trusted
    zone security internet
    zone-pair security trusted-to-internet source trusted destination internet
     service-policy type inspect firewall-policy
    zone-pair security untrusted-to-trusted source internet destination trusted
     service-policy type inspect outside-to-router-policy
    interface Loopback0
     ip address 192.168.17.1 255.255.248.0
    interface Embedded-Service-Engine0/0
     no ip address
     shutdown
    interface GigabitEthernet0/0
     description Internet
     ip address dhcp
     no ip redirects
     no ip proxy-arp
     zone-member security internet
     duplex auto
     speed auto
    interface GigabitEthernet0/1
     ip address 192.168.8.1 255.255.248.0
     duplex auto
     speed auto
    interface GigabitEthernet0/2
     no ip address
     shutdown
     duplex auto
     speed auto
    interface Serial0/0/0:23
     no ip address
     encapsulation hdlc
     isdn switch-type primary-ni
     isdn incoming-voice voice
     no cdp enable
    interface Integrated-Service-Engine1/0
     ip unnumbered Loopback0
     service-module ip address 192.168.17.2 255.255.248.0
     !Application: CUE Running on NME
     service-module ip default-gateway 192.168.17.1
     no keepalive
    interface Virtual-Template1
     ip unnumbered GigabitEthernet0/0
     zone-member security trusted
    ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
    ip forward-protocol nd
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http path flash:/cme-gui-8.6.0
    ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
    ip access-list extended router-access
     permit tcp any host 66.111.111.111 eq 443
    tftp-server flash:apps31.9-3-1ES26.sbn
    control-plane
    voice-port 0/0/0:23
    voice-port 0/3/0
    voice-port 0/3/1
    mgcp profile default
    sccp local GigabitEthernet0/1
    sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0 
    sccp
    sccp ccm group 1
     bind interface GigabitEthernet0/1
     associate ccm 1 priority 1
     associate profile 1 register CME-CONF
    dspfarm profile 1 conference  
     codec g729br8
     codec g729r8
     codec g729abr8
     codec g729ar8
     codec g711alaw
     codec g711ulaw
     maximum sessions 4
     associate application SCCP
    dial-peer voice 500 voip
     destination-pattern 5..
     session protocol sipv2
     session target ipv4:192.168.17.2
     dtmf-relay sip-notify
     codec g711ulaw
     no vad
    dial-peer voice 10 pots
     description Incoming Calls To AA
     translation-profile incoming Inbound_Calls_To_CUE
     incoming called-number .
     port 0/0/0:23
    dial-peer voice 20 pots
     description local 10 digit dialing
     translation-profile outgoing Local-CLID
     destination-pattern 9[2-9].........
     incoming called-number .
     port 0/0/0:23
     forward-digits 10
    dial-peer voice 30 pots
     description long distance dialing
     translation-profile outgoing Local-CLID
     destination-pattern 91..........
     incoming called-number .
     port 0/0/0:23
     forward-digits 11
    dial-peer voice 40 pots
     description 911
     destination-pattern 911
     port 0/0/0:23
     forward-digits all
    dial-peer voice 45 pots
     description 9911
     destination-pattern 9911
     port 0/0/0:23
     forward-digits 3
    dial-peer voice 50 pots
     description international dialing
     translation-profile outgoing InternationalType
     destination-pattern 9T
     incoming called-number .
     port 0/0/0:23
    dial-peer voice 650 pots
     huntstop
     destination-pattern 650
     fax rate disable
     port 0/3/0
    gatekeeper
     shutdown
    telephony-service
     protocol mode ipv4
     sdspfarm units 5
     sdspfarm tag 1 CME-CONF
     conference hardware
     moh-file-buffer 90
     no auto-reg-ephone
     authentication credential cmeadmin tshbavsp$$4
     max-ephones 50
     max-dn 200
     ip source-address 192.168.8.1 port 2000
     service dnis dir-lookup
     timeouts transfer-recall 30
     system message Oregon's Wild Harvest
     url services http://192.168.17.2/voiceview/common/login.do 
     url authentication http://192.168.8.1/CCMCIP/authenticate.asp  
     cnf-file location flash:
     cnf-file perphone
     load 7931 SCCP31.9-3-1SR4-1S.loads
     load 7936 cmterm_7936.3-3-21-0.bin
     load 7942 SCCP42.9-3-1SR4-1S.loads
     load 7962 SCCP42.9-4-2-1S.loads
     time-zone 5
     time-format 24
     voicemail 500
     max-conferences 8 gain -6
     call-park system application
     call-forward pattern .T
     moh moh.wav
     web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
     dn-webedit 
     transfer-digit-collect orig-call
     transfer-system full-consult
     transfer-pattern .T
     fac standard
     create cnf-files version-stamp Jan 01 2002 00:00:00
    ephone-template  1
     softkeys connected  Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
     button-layout 7931 2
    ephone-template  2
     softkeys idle  Dnd Gpickup Pickup Mobility
     softkeys connected  Hold Park Confrn Mobility Trnsfer TrnsfVM
     button-layout 7931 2
    ephone-dn  1  dual-line
     number 200
     label Lisa
     name Lisa Ziomkowsky
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  2  dual-line
     number 201
     label Dylan
     name Dylan Elmer
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  3  dual-line
     number 202
     label Kimberly
     name Kimberly Krueger
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  4  dual-line
     number 203
     label Randy
     name Randy Buresh
     mobility
     snr calling-number local
     snr 915035042317 delay 5 timeout 15 cfwd-noan 500
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  5  dual-line
     number 204
     label Mark
     name Mark McBride
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  6  dual-line
     number 205
     label Susan
     name Susan Sundin
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  7  dual-line
     number 206
     label Rebecca
     name Rebecca Vaught
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  8  dual-line
     number 207
     label Ronnda
     name Ronnda Daniels
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  9  dual-line
     number 208
     label Matthew
     name Matthew Creswell
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  10  dual-line
     number 209
     label Nate
     name Nate Couture
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  11  dual-line
     number 210
     label Sarah
     name Sarah Smith
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  12  dual-line
     number 211
     label Janis
     name Janis McFerren
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  13  dual-line
     number 212
     label Val
     name Val McBride
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  14  dual-line
     number 213
     label Shorty
     name Arlene Haugen
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  15  dual-line
     number 214
     label Ruta
     name Ruta Wells
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  16  dual-line
     number 215
     label 5415489405
     name OWH Sales
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  17  dual-line
     number 216
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  18  dual-line
     number 217
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  19  dual-line
     number 218
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  20  dual-line
     number 219
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  21  dual-line
     number 220
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  22  dual-line
     number 221
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  23  dual-line
     number 222
     label Pam
     name Pam Buresh
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  24  dual-line
     number 223
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  25  dual-line
     number 224
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  26  dual-line
     number 225
     label Elaine
     name Elaine Mahan
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  27  octo-line
     number 250
     label Shipping
     name Shipping
    ephone-dn  28  dual-line
     number 251
     label Eli
     name Eli Nourse
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  29  dual-line
     number 252
    ephone-dn  30  dual-line
     number 253
    ephone-dn  31  octo-line
     number 100
     label Customer Service
     name Customer Service
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  32  octo-line
     number 101
     label Sales
     name Sales
     call-forward busy 214
     call-forward noan 214 timeout 12
    ephone-dn  33  dual-line
     number 260
     label Conference Room
     name Conference Room
     call-forward busy 100
     call-forward noan 100 timeout 12
    ephone-dn  100
     number 300
     park-slot timeout 20 limit 2 recall
     description Park Slot For All Company
    ephone-dn  101
     number 301
     park-slot timeout 20 limit 2 recall
     description Park Slot for All Company
    ephone-dn  102
     number 302
     park-slot timeout 20 limit 2 recall
     description Park Slot for All Company
    ephone-dn  103
     number 700
     name All Company Paging
     paging ip 239.1.1.10 port 2000
    ephone-dn  104
     number 8000...
     mwi on
    ephone-dn  105
     number 8001...
     mwi off
    ephone-dn  106  octo-line
     number A00
     description ad-hoc conferencing
     conference ad-hoc
    ephone-dn  107  octo-line
     number A01
     description ad-hoc conferencing
     conference ad-hoc
    ephone-dn  108  octo-line
     number A02
     description ad-hoc conferencing
     conference ad-hoc
    ephone  1
     device-security-mode none
     mac-address 001F.CA34.88AE
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:2 2:31
    ephone  2
     device-security-mode none
     mac-address 001F.CA34.8A03
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:12
    ephone  3
     device-security-mode none
     mac-address 001F.CA34.898B
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
    ephone  4
     device-security-mode none
     mac-address 001F.CA34.893F
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
    ephone  5
     device-security-mode none
     mac-address 001F.CA34.8A71
     ephone-template 1
     max-calls-per-button 2
     username "susan"
     paging-dn 103
     type 7931
     button  1:6
    ephone  6
     device-security-mode none
     mac-address 001F.CA34.8871
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:7 2:31 3:32
    ephone  7
     device-security-mode none
     mac-address 001F.CA34.8998
     ephone-template 1
     max-calls-per-button 2
     username "matthew"
     paging-dn 103
     type 7931
     button  1:9
    ephone  8
     device-security-mode none
     mac-address 001F.CA36.8787
     ephone-template 1
     max-calls-per-button 2
     username "nate"
     paging-dn 103
     type 7931
     button  1:10
    ephone  9
     device-security-mode none
     mac-address 001F.CA34.8805
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:5
    ephone  10
     device-security-mode none
     mac-address 001F.CA34.880C
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:14
    ephone  11
     device-security-mode none
     mac-address 001F.CA34.8935
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:3
    ephone  12
     device-security-mode none
     mac-address 001F.CA34.8995
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:8 2:31
    ephone  13
     device-security-mode none
     mac-address 0021.5504.1796
     ephone-template 2
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:4
    ephone  14
     device-security-mode none
     mac-address 001F.CA34.88F7
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:23
    ephone  15
     device-security-mode none
     mac-address 001F.CA34.8894
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:26
    ephone  16
     device-security-mode none
     mac-address 001F.CA34.8869
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:28 2:27
    ephone  17
     device-security-mode none
     mac-address 001F.CA34.885F
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:11
    ephone  18
     device-security-mode none
     mac-address 001F.CA34.893C
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:27
    ephone  19
     device-security-mode none
     mac-address 001F.CA34.8873
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:27
    ephone  20
     device-security-mode none
     mac-address A456.3040.B7DD
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:13
    ephone  21
     device-security-mode none
     mac-address A456.30BA.5474
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:15 2:16 3:32
    ephone  22
     device-security-mode none
     mac-address A456.3040.B72E
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:1
    ephone  23
     device-security-mode none
     mac-address 00E0.75F3.D1D9
     paging-dn 103
     type 7936
     button  1:33
    line con 0
    line aux 0
    line 2
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
     stopbits 1
    line 67
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    line vty 0 4
     transport input all
    scheduler allocate 20000 1000
    ntp master
    ntp update-calendar
    ntp server 216.228.192.69
    webvpn gateway sslvpn_gw
     ip address 66.111.111.111 port 443  
     ssl encryption 3des-sha1 aes-sha1
     ssl trustpoint cme_cert
     inservice
    webvpn context sslvpn_context
     ssl encryption 3des-sha1 aes-sha1
     ssl authenticate verify all
     policy group SSLVPNphone
       functions svc-enabled
       hide-url-bar
       svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
       svc default-domain "bendbroadband.com"
     virtual-template 1
     default-group-policy SSLVPNphone
     gateway sslvpn_gw domain SSLVPNphone
     authentication certificate
     ca trustpoint cme_root
     inservice
    end

    I think your ACL could be the culprit.
    ip access-list extended router-access
     permit tcp any host 66.111.111.111 eq 443
    Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly.  If they work fine then we know that we need to open som ports there.
    Please remember to select a correct answer and rate helpful posts

  • I really need some help with rendering

    I am creating a video for a client, and he is going to stream it through his own player. He requires the video to play using dimentions of 430 x 242.
    He wants to keep the file sizes as small as possible.
    I am currently creating his videos using a 1280 x 720 composition, as this is the same aspect ratio as his specific dimentions.
    I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB, and I'm also trying MPEG4 but getting blurry, washed out results that look nothing like the preview in AE. I've tried Flash and it stutters.
    My questions:
    1. Should I render in 1280 x 720 and just ask him to re-size them through his player? (I assume most players can do this?) or should I render to the dimensions of 430 x 242? He doesn't have too much knowledge of video.
    2. What is the best file format and settings?
    3. Is it possible to re-set the render option defaults? I've played around with all of the setting so much that I can't remember how each file format was set before I started this project. I've tried re-starting AE but it still leaves me with the same settings as when I closed it.
    Every time I post a question like this I get people telling me to 'read the basics' or 'we get asked this time and time again etc'. Please note that I have a disability and am finding this very tough - if it isn't too much trouble I'd just appriciate someone giving the information so that I can learn in from here. It will need to be explained simply as yes I am fairly new to AE.
    I just can't seem to find anything which works. MPEG4's are giving me a suitable file size but then look blurred and washed out.
    Many thanks for any help.

    First question: What player is your client going to be using to play this? Everything depends on that. For example, if he's going to be playing the file using QuickTime Player, then the answer is pretty easy: create a QuickTime movie (.mov).
    > Should I render in 1280 x 720 and just ask him to re-size them through his player?
    No, not if you've been told that he wants a 430x242 file. If you make a big movie (in terms of frame dimensions) and have him resize it, then you're going to create much larger files than necessary.
    > I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB
    The QuickTime movie (.mov) format is just a container format. It can contain video encoded using any of a large number of codecs, with any of a range of quality settings. The default is a lossless compression (using the Animation codec) that creates perfect images at the expense of larger files.
    After you've added your composition to the render queue, choose QuickTime as your format in the Output Module Settings dialog box and then click the Format Options button in the Output Module Settings dialog box. You can choose a compression type, set quality, et cetera. People seem to like the H.264 codec for a good balance of size and quality.
    See "Encoding and compression options for movies" for more information.

  • REALLY need some help with my problem (Netgear and...

    Hi everyone,
    Well... where to start really.
    This morning around 5am, I lost connection to the net, yet my Netgear (DG834 wired) showed an uptime of 117 hours, so it showed no reboot. It seems my IP profile was raised (As it was low before for my sync).
    I had no reboot it seems, but my noise margin went up to 9db from 6db. This is fine as it means I should be getting around 6.5meg IP profile going by the sync. Anyway (This is complicated to explain but bear with me).
    My current IP profile is now 7.15K. I know this will come down now to match my sync at 9db (Which should be 6.5meg).
    What is happening, is that any change made to my broadband (Like my IP profile being raised this morning) means that I cannot then connect to the net, and anything connected (Like Xbox Live etc) disconnects, even though the router shows no disconnect, and all the lights are green.
    The only way for me to reconnect to the internet then is to MANUALLY reboot the router, because no matter what website etc I try to view, it just says "Looking for..." in the bottom left corner of the browser, and I can't connect to anything like Xbox Live etc.
    Can anyone explain why this is happening with the Netgear router? Shouldn't any change, like an IP profile increase not affect my broadband connection? It seems whenever a change is made BT side, I have to then manually reboot the router to get online.
    I wondered if anyone with a netgear, or anyone with some knowledge on this could tell me why. This could save me a lot of headaches down the line and stop me having noise margin raised etc because I have to manually reboot the router to get it working again. I just thought that any change, like an increase in IP profile etc, shouldn't affect my connnection and force me to have to manually reboot the router to get it up and running again.
    I hope you understood what I was trying to explain, and thanks in advance for any responses.

    Hi John. Thanks for responding.
    I have been through the options on the router and can't find one that says auto connect at all.
    It seems the router is not disconnecting though (Like this morning when the IP profile raised), as the uptime on both WAN and LAN were showing 117 hours, and all green lights were on, on the router. It's just when a change on the BT side is made, it won't let me get on the net until I do a manual reboot. It's all very baffling to me really.
    I tried googling my problem to no avail also.

  • REALLY need some help with transparent background

    This is really starting to bug me now as I have searched the forums and the web for hours and still cannot get this to work.
    I am creating a simple one page site at http://freeselfhelpebooks.org/50ofTheBestPDProducts/
    I want the header and footer image to have a transparent background with only the text showing, so that the text shows on the background image.
    So far I have created the header image with a transparent background Modify > Canvas > Canvas Colour > Transparent all good so far.  I have added some text.  Then I save as file type PNG 32, however I still get the background as white as you can see above.
    I have tried PNG 8 with alpha transparency, no transparency but to no avail.  I have even downloaded Photoshop CS6 and have the same issues.  What am I doing wrong here?

    First of all, your header graphic is fine; it's a transparent PNG. Your footer is a JPEG, which does not support transparency, so you need to resave that file into a different format (like PNG32, or PNG8 w/alpha transparency).
    As I was trying to suggest, if you're confused about your graphics, check them in a graphics editor or viewer, not in a web page inside a web browser. Web development is a complex beast, and a lot can go wrong.
    In the HTML of your web page, there is a class called "content" being applied to tables and images. This class has a background image being applied to it, which is responsible for the white background on those elements.

  • I really need some help on burning a CD please...

    Hi All,
    I have been having real problems recently with iTunes trying to burn a playlist onto a CD.
    Take into account I have never had any problems in the past and this is the first time this issue has arisen.
    I have read all the posts about changing preferences and also taking the tick off CD Text and it still has not made a difference.I have also put the Audio CD option on too.
    My problem arises when I put the CD in the drive and then it allows me to burn a CD and then it tells me at the end that it has burned the tracks onto the CD in the usual manner, but when I try listening to the CD after either on my laptop or in a stereo it is BLANK and there are no tunes on there.
    Has anyone please got any ideas what the problem might be as I have wasted about 10 cds on this and have come up with no answer - PLEASE HELP!!
    Fujitsu Siemens Intel Celeron   Windows XP  

    Did you select Data Cd? What did you play it on? Some
    data cd's don't work on certain players. When did it
    start? did you install a program or
    something?
    Sony Vaio
    Windows XP
    Hi,
    Thanks for the reply but it was not a data CD and the wierd thing is that it worked on a cd prior to this playlist.
    I have also not installed anything else, it is just bizarre and I just do not know what to do!

  • Really need some help

    I am having trouble trying to delete Quick Times off of my computer. Everytime I go to control panel, add/remove programs, it will not let me do anything. I need help! I need to know how to go about fixing that problem and how to get it off my computer!!! If you can help at all please!!!!! I just need to delete the program and even when i try to open it up it will not let me, it keeps giving me some error message! Help me if you can!

    thank you! ok I am sorry that I am slow when it comes to computer porblems, but I installed the cleanup program and need help what to do next. I wne back and tried to delete the program and still the same problem. if you can help it would be great! thanks and have a great night, go bears!

Maybe you are looking for