Really need some help here to try and get Fios services in my building

I have been trying to convince my landlord for months to get Fios in the building.  Here is a recent email exchange with him.  Does anyone know if any of this is true, about the install damages?  If it is true, then Verizon needs to get their act together! 
Here is the email exchange. 
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios?  I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference.  As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner.  On top of that, I can't even watch HD
movies on demand.  I've had TWC out here twice in the last four months and
every time they claim nothing is wrong.  Its very frustrating.  I'll do
almost anything I can to assist in this.  Please let me know if you can do
anything.
Thank you as always!

james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.   
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move.

Similar Messages

  • Problems with the address book server! Really need some help here!

    Hello everyone!
    for about some time now, we're having some troubbles with the address book server located on our Mac Pro Server running SL Server. The connected clients somehow show multiple entries of groups, contacts and everything else address book can show. Sometimes you see one group or contact about 20-30 times or even more.
    How can the addressbook server on SL Server be configured that these faults won't show up again. With this present, using address book server is useless. As far as my knowledge goes, I've tried everything I can. I deleted the address book account set up on each client, readded it, but no help. I stopped the address book server on the Mac pro, but no help either.
    For your further information: we're connecting 14 clients. Moste of the rum Lion, three run ML and several iDevices connect via WiFi.
    Please help me, as this really is frustrating!
    Looking forward for your help.
    Regards,
    Moritz

    james211 wrote:
    I have been trying to convince my landlord for months to get Fios in the building.   
    If your landlord doesn't want FIOS in the building, then it's not going to happen.
    Vote with your wallet and move.

  • Really need some help here.  My G5 keeps putting itself to sleep and more..

    Just out of the blue my mac doesn't turn on. I turned it on a few more times and it still wouldn'tt power up, my screen was just not recognizing anything. So I open up my mac unplug everything, than turn it back on and it works again. But the fan is very loud, I hear grinding noises every now and than, and the weirdest thing is it would not power up unless I took the cover off my mac and removed the plastic bay that protects the inside from dust.
    Now it keeps putting itself to sleep. Over and over it's so frustrating.
    I'm very concerned here, is this a hard drive problem? I even formated my hard drive, but that did nothing.
    What is going on here?

    Have you checked the PRAM battery?
    I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
    Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.
    I believe this is the battery for a Late 2005 G5 2.5 dual. Yours is near the age it should be replaced.
    DALE

  • GS60 2PE Hopeless really need some help here!!!

    Hey MSIer, I just did a complete wipe on my hard drive and  now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
    Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_T

    Quote from: Syrellaris;112053
    You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
    Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
    Quote from: JakeSully;112055
    Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
    I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?

  • I really need some help here....Please?

    Hey guys i have posted numerous threads regarding this issue but to no avail so im going to try one last time.
    Basically, Itunes works fine UNTIL i start to sync, Then it freezes up for a while then starts to sync a little bit...Then freezes and syncs a little bit..And so on..
    It took me 2 WHOLE days to sync 15 episodes of southpark.
    I transfered some movies and songs to my wifes laptop and it sync'd everything in around 50 seconds flat, So its now obvious that it must be my PC.
    I have USB 2 and i have 6 slots, I have tried ALL the different USB slots and it stays the same.
    Does anyone have ANY idea what this could be?
    I spoke to the guy who built my PC and he is changing the USB ports, He also said if that doesn't work he will change my motherboard..
    Is there a simple solution to this? Am i going to have to change Motherboard? ANY help would really be greatful.

    Hold your horses....
    Have you done some "rule out" testing? How do you know that the USBs are bad? How do you know that the MB is bad?
    1/ do all ports work when you plug a mouse in them?
    2/ what is a throughput when you plug a flash drive into these USBs (try 1 at a time) and copy a large file onto it? Test all the ports and compare speeds - are they at least 5-10 MB per sec? If yeah, then they are OK - system wise.
    If the USBs don't work and it's a PCI card, look for drivers and if no luck, buy a new card.
    If the USBs are built into the MB, then you have no other choice but to replace it, but only as the very last resort. Seems to me that he's trying ot hose you, my friend.....
    IN any case, it could be the drivers! Or..iTunes. Did you try to remove & reinstall?

  • Alright guys I need some help here with itunes and my music files

         Basically, I've had two apple accounts in the past like 4 years.  One day I connect my Ipod touch to my computer and downloaded an update from Itunes, not knowing that it erases all your content.  I didnt have my music files backed up either, so I ended up losing over $300 worth of music and apps.  Ever since then I never updated my touch, from the fear of losing my music.  Now that I have my own apple account, I have music files from the first account and my account.  My question is how can I back both of these groups of files up and update my ipod without losing any of this content!?  I would really appreciate a step by step process etc.  Thanks guys for helping me out!
    -Colin Wagner

    You can always redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You can transfer iTunes purchases to your computer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • Really need some help here!!

    Right chaps. Been with bt 16 months now(contract due to run out in dec) been paying my bills on time and not running up high bills..my monthly base cost is around 47 pound per month..
    Direct Debit is around 62 pound per month and ive just recieved an email saying its going p to 82 per month!!!!1
    how can my direct debit be nearly double my monthly bill when we hardlys use the phone (mobiles all the way)
    im on unlmited inf 2 (so no extra bb charges),never misses any bills,always bee on time.
    Im just stumped as to why my direct debit is going up and not down.
    Any help?

    Welcome to the forum. The Monthly Payment Plan strikes again! There's no point in trying to guess how the payments are determined as the system works (if that's the correct word) in unfathomable ways. It might be possible to get them amended, or even do it yourself in MyBT, but surely enough it will go wrong again at some point.
    Do yourself a favour and switch to monthly billing. It's very reliable in my experience, and once it's up and running you're simply billed each month for the next month's standing charges plus any one-offs (eg call charges) incurred during the previous month. There are a couple of downsides in that any substantial one-offs can't be spread over several months and that you can't change your direct debit date (which is fixed at 8 days after the bill) but that's a small price to pay for the reliability. If you switch while you are in credit, the balance will be set against subsequent bills until it's used up.
    You can click the white star next to this message if you think it was helpful.

  • Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

    Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

    sounds like the cable or the iphone connector are somehow damaged

  • Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

    need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

    What are the existing settings iMovie?
    Al

  • System won't boot. Could really use some help here.

    I have the K8T-Neo FISR2 mobo. When I set up the system, the SATA drive was set up as drive F: (onto which I installed Windows XP Home). I added a 2nd SATA drive later, and it became C:. Both drives are plugged into the Promise SATA ports. The system has been running fine for about a year now.
    I was having a problem with a program not running properly. I stopped the process and tried to restart it, but it didn't work. It was a program that drives my Logitech gaming keyboard (with LCD screen). After I rebooted, the system would load windows, then after Windows was loaded, it would load up a program when I went into it and crash. It looked like it would crash on PXHELP.DLL (something like that). I booted up into safe mode, renamed the file so it wouldn't load, and now it won't boot at all. It starts to show the Windows logo and then instantly reboots. I can't even get into Safe Mode as it does the same thing.
    I tried booting from an XP CD to do a repair, but when it boots, it doesn't see the hard drives. I downloaded the Promise drivers, put them onto a floppy, and load them as Windows is booting from the CD. It seems to load the drivers, but when I choose to do a repair (or even a new install), Windows comes back and tells me that I have no hard drives attached to the computer. I just can't seem to get Windows to see those hard drives!
    I could really use some advice here......

    Quote from: Tiresmoke on 04-January-06, 01:36:35
    Try swapping the Drive Cables. You may have one that is not engaging as well as it should.
    When I let the PC boot up like normal (without booting from the CD), it sees the drives and Windows tries to load, so I don't think it's the cables. I'll make sure they're reset, but I really don't think that's it.

  • Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen.  Need some help here.

    Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor.  Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen.  Need some help if anyone else has run into this problem.

    You should contact Microsoft for Mac Support  and/or post in their forums.

  • I am the biggest "Newb" on this site,  and I really need some help please..

    Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
    When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
    That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
    UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
    Edited by: user11033020 on Apr 14, 2009 11:41 AM

    As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
    Forms
    The Community Feedback forum isn't meant for product-related questions (as it says in the title).
    Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

  • Hey I need a code for an Itunes 25$ gift card because when I scratched with a coin like it says it scratched the code right of and its unreadable. I need some help here.

    What I want is a code so I can buy my Lord of the Rings Extended Edition Videos because its upseting to see how easy it is to ruin these codes. The code was for 25$ for Itunes and now its ruined please help me its Christmas and I just got my Ipod Touch.

    iTunes Store: Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • Midi novice - frustrated, and really need some help!

    Hi there,
    I'm really frustrated, because I want simplicity and I'm finding that it's taking a very long time to learn all the ins and outs of using Logic.  I have spent hours every weekend trying to learn how to use it. 
    What I want to do, but can't seem to figure out how, is connect my Kawai MP5 (digital stage piano) via USB, and actually use the internal sounds of my piano within Logic.  Is there a way to do this using the external instrument within Logic?  Or is there another way?  I realize I could probably connect it using an audio interface and an audio cable from the piano directly into my macbook, but at this time I don't have an interface.  Could somebody just tell me if there is a way to use the internal sounds of my piano within Logic via a USB connection?  How to set it up? AND, how to actually hear my piano coming through the speakers once it is connected?
    I'd appreciate whatever assistance I can get with this.
    Thanks!

    MIDI - musical instrument digital interface, and I'm confused because USB is another way to transmit midi data (see wikipedia article which states, " In the years since, MIDI over USB is increasingly common on musical instruments. As other interfaces that used to be used for MIDI (serial, joystick, etc.) disappeared from personal computers, USB became the common interface for connecting MIDI devices."
    AND, according to the documentation included with Logic Pro 9 it does appear that this is something I can do.
    External Instrument
    You can use the External Instrument to route external MIDI sound generators through the Mixer, which you can then process with effects.
    You can also use the External Instrument to transmit and receive MIDI information through the instrument channel strip that it is inserted in. This enables you to control an external module—both MIDI and audio—from within one element."
    I'm just not sure how to set it up, and get it working.

  • Ok I REALLY need some help

    Please post anyhting you can to help me out, I've had this ipod for so long now... and recently itunes has just been being incredibly stupid for me. So here is how it all began, few days ago i connect my ipod... and it auto syncs it, even when that function was turned off... replacing all of my music with the ones in my library ( completely different) k few days later i turn it on again, i got a new HD recently since my old one busted and i redownload itunes v8 and i cant put songs on my ipod. I try and put one on and it automatically puts it in my normal Itunes library, then in the shuffle playlist all you see is this 1 song being duplicated 111 times.... so now this Itunes has deleted over 30 GB of info off my ipod... all movies and songs.. so its completely clean which really makes me angry. I can't fix this.. i dont know what this is.. please help me >< i have already tried reinstalling it, unless there is some sort of function in options to actually get my god dan songs on without them duplicated 100 times and get this ipod working agian please I need help... i've spent all my day trying to fix this.. thanks for your feedback

    I know this is a IPod forum
    Actually it's not. It's a forum for feedback about Apple's discussions forums, as the title implies. I suggest you post your message again here:
    http://discussions.apple.com/forum.jspa?forumID=800

Maybe you are looking for