REALLY NEED URGENT HELP with typedef struct char in LabVIEW
Hi,
So I am calling a DLL inside my LabVIEW VI.
Inside the DLL, I have the following structure:
typedef struct
char string[21];
} Geo_Tuple;
Then I used it here in a function by calling:
set_Geo_Coordinates(const File_or_Interactive State, const Input_or_Output Direction, const Geo_Tuple coordinates)
(Note that File_or_Interactive and Input_or_Output are typedef enum.)
So now, I am trying to implement this function in LV using the Call Function Node.
However, it's not working --> const Geo_Tuple coordinates does not have the correct structure.
So my question:
How do I implement
typedef struct
char string[21];
} Geo_Tuple;
So that I can use it here: set_Geo_Coordinates(const File_or_Interactive State, const Input_or_Output Direction, const Geo_Tuple coordinates)
Thanks!
How have you configured your call library node? To get a representation in LabVIEW of your Geo_Tuple type you'll need to create a cluster that contains 21 U8 elements, which you can do by creating an empty U8 array and wiring it to "Array to Cluster" set to 21 elements. Connect this to the input side of the call library node. On the output side, convert back to an array, and from there convert it to a string.
Similar Messages
-
Need urgent help with HSDIO hardware timing
Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan. -
Need urgent help with Ifs1.1 on Solaris
We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
nullYes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null -
Need urgent help with RAID failure on Graphics server (running OSX10)
Hey.
Here's the deal... Our graphics department has a MAC G4 (fully upgraded. newest patches, OS, etc.) that's got a 4 port SATA RAID controller. They use this with four 750GB hard drives as an external RAID (the OS is on a seperate, 65GB hard drive). The way it's set up, through Apple's OS, is we have the four 750GBs in pairs... those pairs are striped, and then the two sets of striped 750s are mirrored. This has worked just fine for a number of months, but we recently had a power surge, and now we're unable to mount "Monkey" (the name of the 1.4TB array).
See the below screenshots for more clarification.
http://www.amcdoors.com/lorenzo/raidsetup.JPG
This shows the RAID card, and the four SATA cables coming out of it.
http://www.amcdoors.com/lorenzo/leftside1.JPG
As you can see in this and the below screenshots, this shows the 1.4TB Striped set as 'online', but the two below (the two 750GB hard drives) show up as "offline".
http://www.amcdoors.com/lorenzo/leftside2.JPG
this shows the actual drive i click on. same thing
http://www.amcdoors.com/lorenzo/leftside3a.JPG
If i click the entire array, you can see how it's set up (the Mirrored RAID set consisting of the two Striped RAID sets). The RAID sets (all 3 of them) are showing up as online, yet the drives are offline. No idea why. The drives are all powered, and are spinning, and plugged in.
http://www.amcdoors.com/lorenzo/leftside3b.JPG
when you click "Monkey Drive", nothing shows up in it. i don't remember if anything ever used to. if you click 'mount', nothing happens.
http://www.amcdoors.com/lorenzo/leftside4.JPG
http://www.amcdoors.com/lorenzo/leftside5.JPG
this shows the exact same problem as the first RAID set.
http://www.amcdoors.com/lorenzo/verifyRAIDset1.JPG
If you try to Verify the RAID set, it shows that no repairs are necessary
http://www.amcdoors.com/lorenzo/verifymonkey.JPG
If you try to verify Monkey, you get a "Volume Needs Repair" error... but when you try to repair it, you get this:
http://www.amcdoors.com/lorenzo/repairmonkey.JPG
Really need help; this is a pretty critical problem. Someone that's familar with RAID solutions on MACs please help me out. We can't risk losing any data if at all possible.
Thanks
~LorenzoYou might want to post this to the Server Products forums.
-
Need Urgent Help with Servlets!!!
I was just assigned a java project few days back and the thing is that i noe nuts abt JAVA!!! My first time and i admit i'm a slow learner.
I was tasked to develop a servlet for web based query of inventory status in FIFO storage from QIS database.
Basically, i heard according to my supervisor that this is a very simple project that may be completed in just days..but as i said this is my first Java program and i really need u guys to help me!!!! I have no idea how to start the entire coding process.
The main page where the option buttons are is actually a form. This program have a HTTP extension i think. Below i have indicate the System and User Requirements.
System Requirements
* A Servlet
* 2 option buttons
* 1 for retrieving a Summarised Report
* 1 for retriveving an Detailed Report
* 1 command button for retrieval of data
* Retrieved data will be displayed on another frame
User Requirements
* Be able to view Summarised Report at a click of a mouse
* Be able to view Detailed Report also at a click of a mouse
PLS HELP!!!!!!!!Justa comment...
<< according to my supervisor that this is a very simple project that may be completed in just days
If your supervisor is so confident, then, maybe he/she should just get it done himself/herself. I really mean it. However, if that does happen, he/she should provide post-implementation support himslef/herself.
In the meanwhile you can continue thinking about doing it the right way. Which is to first get some grasp of sorts about the various Java and other technologies and concepts you are talking about. Then have some kind of plan and follow it.
I think at the end both you, and more importantly, your supervisor would see the difference in the result with respect to quality of work.
Forums such as these provide an excellent wealth of information mostly because they are a means to consolidate knowledge gained by individuals from their past experience.
However, in my opinion, it would be wrong to expect that one would be able to design and implement a real-life application just from information gathered from such forums. An example problem if you do it that way is: who will provide guaranteed support if something does not work in your real-life application. Your supervisor ?
Instead, do the study part systematicaly. Try to convince your supervisor that thats the way to do it. Then do it. And come back with specific problems you might have.
Best luck. -
Need urgent help with database startup
dear all,
i am using oracle 10g on windower server 32 bit.
i try to startup my database today, and it give me error, and it is my production database,
i need very urgent help from you.(i have no rman backup , and the data is not so necessory, since it is for student practice.)
SQL> startup open
ORACLE instance started.
Total System Global Area 524288000 bytes
Fixed Size 790180 bytes
Variable Size 250343772 bytes
Database Buffers 272629760 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
ORA-01115: IO error reading block from file 34 (block # 1)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 23) Data error (cyclic redundancy check).regards.Maahjoor wrote:
Hi dears,
i need further assistance from your side, i have restarted the server, but the same problem.
as there a way to drop and re-create a system tablespace? since the file 34 belong to system tablesapce.
regardsNo.
So just create a new database. That will take all of ten minutes. And tell your students to create new tablespaces. That will take them two minutes. -
Need urgent help with the query - Beginer
Hello - I need help with a query to populate data in a table.Here is the scenario.
Source1
MnthID BranchCod CustID SegCode FXStatus ProfStatus Profit
200712 B1 C1 20 Y Y 100
Source2
MnthID BranchCod CustID ProdCode ProdIndex
200712 B1 C1 12 1
200712 B1 C2 12 0
Destination
MnthID BranchCod SegCode ProdCode CountSegCust CountProdCust ProfitProdCust
Condition and Calculations:
1)Source1 customer are base customers.If Source2 has customers who is not in source1 then that customer's record should not be fetched.
2)SegCode, FX Status, ProfStatus is one variable in destination table. [ SegCode = SegCode+ FXStatus (if FXStatus = Y)+ ProfStatus (if FXStatus = Y) ]
3)CountSegCust = CountCustID Groupby MnthID,BranchCod,SegCode Only.
4)CountProdCust = CountCustID Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
5)ProfitProdCust = Sum of Profit of Customers Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
Apologies for bad formatting.
Thanks in advance!!A total guess indeed.
It's not clear whether some aggregation can be done (summing counts of grouped data might cause some customers being counted more than once)
insert into destination
select mnthid,branchcod,segcode,prodcode,countsegcust,countprodcust,profitprodcust
from (select s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end segcode,
s2.prodcode,
count(s1.custid) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
order by null
) countsegcust,
count(case proindex when 1
then custid
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) countprodcust,
sum(case proindex when 1
then profit
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) profitprodcust,
row_number() over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) the_row
from source1 s1,source2 s2
where s1.mnthid = s2.mnthid
and s1.branchcod = s2.branchcod
and s1.custid = s2.custid
where the_row = 1Regards
Etbin -
Need urgent help with communicating with the HP 4155B analyser with Labview
i folks,
I'm currently trying to communicate with our HP 4155B semiconductor pamaremter analyser. I do not have experience with GPIB yet. I have installed the NI VISA.
I was wondering if anyone could help with getting me started on how to start communicating with the device using Labview.
I'm not certain where to start.
Kind regards
RobHi,
Thanks for the help. I now have communication with the instrument.
I was wondering if it's possible to to setup a data measurement (I-V Sweep) and be able to read the measurement data in realtime as it is being measured. So I basically see the graph updating itself on the PC during the measurement.
Is this possible? Could anyone give advice on how I can go about this or are there any examples that can help me understand how to do this?
I'm not completely sure how to initialise the instruemnt for communication and handle VISA WRITEs and READs. within LabView
Best regards
Rob -
Need urgent help with exporting movie
I have a simple 7-minute project on FCP 7 that consists of still images from the internet and hand drawn images with a few animated elements.
It has only one audio track and two video tracks. I am using PAL DV size format. I am in the UK.
I exported it using quicktime conversion with H264 compression and good quality and the final file size was 125MB.
My urgent problem is that I need to upload this file to a university website for an online course in two days, and their file size limit is 50 MB.
I need to make sure that the teacher can play the file, and I need to get it down to a smaller file size for uploading.
I have tried all sorts of exporting from FCP. I tried avi, m4v (the setting said ipod and it produced the m4v file), and quicktime mov at different sizes like 1/4vga size. The best file size was 29 mb for the m4v ipod export, and 98mb for the qt mov file exported at medium quality. The avi file grew to 1.2gb!
I don't know if the m4v file is playable on the system that the teacher uses (she is on a windows computer).
Can anyone please give me some specific advice on how to create a smaller video file that is more universally compatible?
I have access to all of the FCP 7 suite and the Adobe CS6 suite which includes Premiere Pro, Prelude and Adobe Media encoder, if that helps.
Thanks a lot for any advice.Jonathan Rooper wrote:
Hi Luis
The advice you've been given is good for helping you to get a good quality video at a reasonable file size.
But it may be worth thinking more about which format will certainly play on your teacher's PC. The most likely player on any PC is Windows Media Player, which tens to be installed by default.
The most likely video to be viewed on a PC is one from YouTube... andH.264 is supported on all "modern" PCs. QuickTime Player is free and very available.
A disadvantage for Mac users is that yoou'll ned the Flip4Mac plugin to create WMV movies. I think the cheapest paid version of Flip4Mac costs around £30.
All you need on a Mac fis the free Flip4Mac player.
If you get that, and choose the web high I quality setting, you should have a file within 50MB that plays reliably and looks OK. (A cheaper way of doing this, if you have access to a PC, is to use the free Windows Media Encoder).
Best of luck
Jonathan -
Hi. I need urgent help with Adobe Premiere Pro CS3
Hello there. I am new to using Adobe Premiere CS3. As I have given up on Vegas. But I am stuck at the first hurdle! Please help.
When I load up Premiere, I select new project. Once I click that it asks me to load a preset. And I have no idea what to choose! And I have a project that needs to be edited, I am really anxious about it all.
My footage that I want to edit was shot on a 600D DSLR. And I dont know what preset to choose for the best quality when I render. (I cannot recall what shuitter speed I shot at I think it was varied).
Belowe is a picture that I am stuck on.
So IF YOU COULD PLEASE tell me what to select for my 600D footage I would be so grateful.!!!
(I also plan to put the edit onto a DVD - If that matters). (And Youtube).Or, if you don't have a 64bit computer and Win7 64bit to run CS6, take a look at Premiere Elements 10
I **think** it works with your camera, but check the PreElements forum before you buy
http://forums.adobe.com/community/premiere_elements -
Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones
Hello,
I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6. I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio. It's as if no audio is going back and forth. When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
clock timezone PST -8 0
clock summer-time PST recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.8.1 192.168.8.19
ip dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default-router 192.168.8.1
option 150 ip 192.168.8.1
lease 30
multilink bundle-name authenticated
isdn switch-type primary-ni
crypto pki server cme_root
database level complete
grant auto
lifetime certificate 7305
lifetime ca-certificate 7305
crypto pki token default removal timeout 0
crypto pki trustpoint cme_root
enrollment url http://192.168.8.1:80
revocation-check none
rsakeypair cme_root
crypto pki trustpoint cme_cert
enrollment url http://192.168.8.1:80
revocation-check none
crypto pki trustpoint TP-self-signed-2736782807
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2736782807
revocation-check none
rsakeypair TP-self-signed-2736782807
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
vpn-group 1
vpn-gateway 1 https://66.111.111.111/SSLVPNphone
vpn-trustpoint 1 trustpoint cme_cert leaf
vpn-profile 1
host-id-check disable
voice class codec 1
codec preference 1 g711ulaw
voice class custom-cptone jointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone leavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice translation-rule 1
rule 1 /9400/ /502/
rule 2 /9405/ /215/
rule 3 /9410/ /500/
voice translation-rule 2
rule 1 /.*/ /541999999/
voice translation-rule 100
rule 1 /^9/ // type any unknown plan any isdn
voice translation-profile Inbound_Calls_To_CUE
translate called 1
voice translation-profile InternationalType
translate called 100
voice translation-profile Local-CLID
translate calling 2
license udi pid CISCO2911/K9 sn FTX1641AHX3
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module sm 1
username routeradmin password 7 091649040910450B41
username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-12,24
class-map type inspect match-any sslvpn
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-all router-access
match access-group name router-access
policy-map type inspect firewall-policy
class type inspect sslvpn
inspect
class class-default
drop
policy-map type inspect outside-to-router-policy
class type inspect router-access
inspect
class class-default
drop
zone security trusted
zone security internet
zone-pair security trusted-to-internet source trusted destination internet
service-policy type inspect firewall-policy
zone-pair security untrusted-to-trusted source internet destination trusted
service-policy type inspect outside-to-router-policy
interface Loopback0
ip address 192.168.17.1 255.255.248.0
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Internet
ip address dhcp
no ip redirects
no ip proxy-arp
zone-member security internet
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.8.1 255.255.248.0
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 192.168.17.2 255.255.248.0
!Application: CUE Running on NME
service-module ip default-gateway 192.168.17.1
no keepalive
interface Virtual-Template1
ip unnumbered GigabitEthernet0/0
zone-member security trusted
ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/cme-gui-8.6.0
ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
tftp-server flash:apps31.9-3-1ES26.sbn
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
mgcp profile default
sccp local GigabitEthernet0/1
sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/1
associate ccm 1 priority 1
associate profile 1 register CME-CONF
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 4
associate application SCCP
dial-peer voice 500 voip
destination-pattern 5..
session protocol sipv2
session target ipv4:192.168.17.2
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 10 pots
description Incoming Calls To AA
translation-profile incoming Inbound_Calls_To_CUE
incoming called-number .
port 0/0/0:23
dial-peer voice 20 pots
description local 10 digit dialing
translation-profile outgoing Local-CLID
destination-pattern 9[2-9].........
incoming called-number .
port 0/0/0:23
forward-digits 10
dial-peer voice 30 pots
description long distance dialing
translation-profile outgoing Local-CLID
destination-pattern 91..........
incoming called-number .
port 0/0/0:23
forward-digits 11
dial-peer voice 40 pots
description 911
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 45 pots
description 9911
destination-pattern 9911
port 0/0/0:23
forward-digits 3
dial-peer voice 50 pots
description international dialing
translation-profile outgoing InternationalType
destination-pattern 9T
incoming called-number .
port 0/0/0:23
dial-peer voice 650 pots
huntstop
destination-pattern 650
fax rate disable
port 0/3/0
gatekeeper
shutdown
telephony-service
protocol mode ipv4
sdspfarm units 5
sdspfarm tag 1 CME-CONF
conference hardware
moh-file-buffer 90
no auto-reg-ephone
authentication credential cmeadmin tshbavsp$$4
max-ephones 50
max-dn 200
ip source-address 192.168.8.1 port 2000
service dnis dir-lookup
timeouts transfer-recall 30
system message Oregon's Wild Harvest
url services http://192.168.17.2/voiceview/common/login.do
url authentication http://192.168.8.1/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-3-1SR4-1S.loads
load 7936 cmterm_7936.3-3-21-0.bin
load 7942 SCCP42.9-3-1SR4-1S.loads
load 7962 SCCP42.9-4-2-1S.loads
time-zone 5
time-format 24
voicemail 500
max-conferences 8 gain -6
call-park system application
call-forward pattern .T
moh moh.wav
web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
dn-webedit
transfer-digit-collect orig-call
transfer-system full-consult
transfer-pattern .T
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
softkeys connected Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
button-layout 7931 2
ephone-template 2
softkeys idle Dnd Gpickup Pickup Mobility
softkeys connected Hold Park Confrn Mobility Trnsfer TrnsfVM
button-layout 7931 2
ephone-dn 1 dual-line
number 200
label Lisa
name Lisa Ziomkowsky
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 2 dual-line
number 201
label Dylan
name Dylan Elmer
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 3 dual-line
number 202
label Kimberly
name Kimberly Krueger
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 4 dual-line
number 203
label Randy
name Randy Buresh
mobility
snr calling-number local
snr 915035042317 delay 5 timeout 15 cfwd-noan 500
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 5 dual-line
number 204
label Mark
name Mark McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 6 dual-line
number 205
label Susan
name Susan Sundin
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 7 dual-line
number 206
label Rebecca
name Rebecca Vaught
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 8 dual-line
number 207
label Ronnda
name Ronnda Daniels
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 9 dual-line
number 208
label Matthew
name Matthew Creswell
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 10 dual-line
number 209
label Nate
name Nate Couture
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 11 dual-line
number 210
label Sarah
name Sarah Smith
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 12 dual-line
number 211
label Janis
name Janis McFerren
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 13 dual-line
number 212
label Val
name Val McBride
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 14 dual-line
number 213
label Shorty
name Arlene Haugen
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 15 dual-line
number 214
label Ruta
name Ruta Wells
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 16 dual-line
number 215
label 5415489405
name OWH Sales
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 17 dual-line
number 216
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 18 dual-line
number 217
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 19 dual-line
number 218
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 20 dual-line
number 219
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 21 dual-line
number 220
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 22 dual-line
number 221
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 23 dual-line
number 222
label Pam
name Pam Buresh
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 24 dual-line
number 223
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 25 dual-line
number 224
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 26 dual-line
number 225
label Elaine
name Elaine Mahan
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 27 octo-line
number 250
label Shipping
name Shipping
ephone-dn 28 dual-line
number 251
label Eli
name Eli Nourse
call-forward busy 500
call-forward noan 500 timeout 10
ephone-dn 29 dual-line
number 252
ephone-dn 30 dual-line
number 253
ephone-dn 31 octo-line
number 100
label Customer Service
name Customer Service
call-forward busy 500
call-forward noan 500 timeout 12
ephone-dn 32 octo-line
number 101
label Sales
name Sales
call-forward busy 214
call-forward noan 214 timeout 12
ephone-dn 33 dual-line
number 260
label Conference Room
name Conference Room
call-forward busy 100
call-forward noan 100 timeout 12
ephone-dn 100
number 300
park-slot timeout 20 limit 2 recall
description Park Slot For All Company
ephone-dn 101
number 301
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 102
number 302
park-slot timeout 20 limit 2 recall
description Park Slot for All Company
ephone-dn 103
number 700
name All Company Paging
paging ip 239.1.1.10 port 2000
ephone-dn 104
number 8000...
mwi on
ephone-dn 105
number 8001...
mwi off
ephone-dn 106 octo-line
number A00
description ad-hoc conferencing
conference ad-hoc
ephone-dn 107 octo-line
number A01
description ad-hoc conferencing
conference ad-hoc
ephone-dn 108 octo-line
number A02
description ad-hoc conferencing
conference ad-hoc
ephone 1
device-security-mode none
mac-address 001F.CA34.88AE
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:2 2:31
ephone 2
device-security-mode none
mac-address 001F.CA34.8A03
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:12
ephone 3
device-security-mode none
mac-address 001F.CA34.898B
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 4
device-security-mode none
mac-address 001F.CA34.893F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
ephone 5
device-security-mode none
mac-address 001F.CA34.8A71
ephone-template 1
max-calls-per-button 2
username "susan"
paging-dn 103
type 7931
button 1:6
ephone 6
device-security-mode none
mac-address 001F.CA34.8871
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:7 2:31 3:32
ephone 7
device-security-mode none
mac-address 001F.CA34.8998
ephone-template 1
max-calls-per-button 2
username "matthew"
paging-dn 103
type 7931
button 1:9
ephone 8
device-security-mode none
mac-address 001F.CA36.8787
ephone-template 1
max-calls-per-button 2
username "nate"
paging-dn 103
type 7931
button 1:10
ephone 9
device-security-mode none
mac-address 001F.CA34.8805
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:5
ephone 10
device-security-mode none
mac-address 001F.CA34.880C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:14
ephone 11
device-security-mode none
mac-address 001F.CA34.8935
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:3
ephone 12
device-security-mode none
mac-address 001F.CA34.8995
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:8 2:31
ephone 13
device-security-mode none
mac-address 0021.5504.1796
ephone-template 2
max-calls-per-button 2
paging-dn 103
type 7931
button 1:4
ephone 14
device-security-mode none
mac-address 001F.CA34.88F7
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:23
ephone 15
device-security-mode none
mac-address 001F.CA34.8894
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:26
ephone 16
device-security-mode none
mac-address 001F.CA34.8869
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:28 2:27
ephone 17
device-security-mode none
mac-address 001F.CA34.885F
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:11
ephone 18
device-security-mode none
mac-address 001F.CA34.893C
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 19
device-security-mode none
mac-address 001F.CA34.8873
ephone-template 1
max-calls-per-button 2
paging-dn 103
type 7931
button 1:27
ephone 20
device-security-mode none
mac-address A456.3040.B7DD
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:13
ephone 21
device-security-mode none
mac-address A456.30BA.5474
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:15 2:16 3:32
ephone 22
device-security-mode none
mac-address A456.3040.B72E
paging-dn 103
type 7942
vpn-group 1
vpn-profile 1
button 1:1
ephone 23
device-security-mode none
mac-address 00E0.75F3.D1D9
paging-dn 103
type 7936
button 1:33
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
transport input all
scheduler allocate 20000 1000
ntp master
ntp update-calendar
ntp server 216.228.192.69
webvpn gateway sslvpn_gw
ip address 66.111.111.111 port 443
ssl encryption 3des-sha1 aes-sha1
ssl trustpoint cme_cert
inservice
webvpn context sslvpn_context
ssl encryption 3des-sha1 aes-sha1
ssl authenticate verify all
policy group SSLVPNphone
functions svc-enabled
hide-url-bar
svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
svc default-domain "bendbroadband.com"
virtual-template 1
default-group-policy SSLVPNphone
gateway sslvpn_gw domain SSLVPNphone
authentication certificate
ca trustpoint cme_root
inservice
endI think your ACL could be the culprit.
ip access-list extended router-access
permit tcp any host 66.111.111.111 eq 443
Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly. If they work fine then we know that we need to open som ports there.
Please remember to select a correct answer and rate helpful posts -
Need Urgent Help With Getting Intl Service from Bangkok
Before I arrived in Bangkok, I spoke with Verizon CS from the US because I needed Intl Service on my Iphone 4. My boyfriend has an Iphone 5 and was able to add a calling plan in 5 minutes of calling Verizon CS. I then called Verizon CS, and was told that my Iphone 4 cannot be used in Thailand. I told the CS Rep that my boyfriend just added the service on his Iphone 5, and did the same on a trip to Thailand last year with an Iphone 4. She told me that with an Iphone 5 he also cannot use the service in Thailand without a Sim Card or Global Phone? I then put him on the phone with her, and they spoke for ten minutes about this before my plane departed.
I have been in Bangkok since 04MAR14 trying to reach Verizon by web, Instant Chat, phone, and even called Verizon 611 from my boyfriend's handset. he call Failed! He then gave me this number to call Verizon Global Support: 908-559-4899. I have called this number numerous times from the hotel. The recording does not recognize when I "Press 1" or "Press 2", and proceeded to hang up on me several times. Is there no human at Verizon that help me????? I have spent approx 3 hours now trying to contact Verizon since 04MAR14. I am supposed to be enjoying my vacation here. Can someone please address these questions immediately?
1. Am I currently being charged to use WIFI in Thailand?
2. I transited Tokyo on 03MAR, and tried to call Verizon Support from my Handset, which Failed. Am I being charged for that?
3. What message do my contacts receive when they text me in the US?
4. Can I activate message response to contacts in the US now telling them that I am out of the country until the evening of 11MAR14?
Please help me, I am extremely frustrated, as I desparately want Phone service here in Thailand, and I am transiting back to Tokyo on 10MAR14, arriving there at 245pm, and I will need Phone service there as well.
Sincerely,
Nancy
Private info removed as required by the Terms of Service.
Message was edited by: Admin ModeratorI'm so sorry you haven't been able to get any service while traveling NancyStuckInThaiWithNoService, as well as for not being able to get a hold of anyone to assist you. I'm happy to answer your questions here. As you mentioned, the iPhone 4 is not a Global phone. Therefore, you can only use on a CDMA network, (not GSM). Thailand is GSM/Global, Japan/Tokyo is CDMA; therefore, you can use phone there. (It could be settings were not set correctly to use in Tokyo.
1. If you're using WiFi, there is no charge. Its best to turn Mobile Data off in Settings to avoid any International charges.
2. Japan/Tokyo calls are $1.99/minute. However, if trying to reach Global Support, you will not be charged.
3. Your contacts don't receive any notification when they text you. They may get some alert days later, that the message was not received by you/ or it has been timed out, but it won't say why.
4. If you're able to use another phone, and call your mobile number, you can press # when you hear your voice mail greeting, enter password, then # again, to change personal greeting. You're able to update greeting with notification that you're traveling.
** When back in Tokyo, you can go to Settings & make sure Airplane Mode is OFF. Also, you can go to General, (from Settings),> Network> Cellular Data- ON> Data Roaming- ON.***
Here are rates while in Japan/Tokyo http://vz.to/18TRKVE
Lastly, it may be easier to reach us on Facebook at Verizon Wireless, or on Twitter at @VZWSupport
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport -
Need urgent help with query....
i need to print loc field with it but the logic is get ti loc code where the month is maximum...
Need output like this
K Loc M_1 M_2 M_3 M_4 M_5 M_6
A 1 2.5 4.5 0 0 0 0
B 4 0 0 0 0 2.5 0
C 3 2.5 2.5 2.5 2.5 2.5 2.5
drop table y;
create table y( key char(1),
loc number,
month char(2),
amnt number);
insert into y values('A',2,'01',2.50);
insert into y values('A',1,'02',4.50);
insert into y values('B',4,'05',2.50);
insert into y values('C',2,'01',2.50);
insert into y values('C',8,'02',2.50);
insert into y values('C',3,'03',2.50);
insert into y values('C',3,'04',2.50);
insert into y values('C',3,'05',2.50);
insert into y values('C',3,'06',2.50);
commit ;
select key
,sum(decode(month,'01',amnt,0)) m_1
,sum(decode(month,'02',amnt,0)) m_2
,sum(decode(month,'03',amnt,0)) m_3
,sum(decode(month,'04',amnt,0)) m_4
,sum(decode(month,'05',amnt,0)) m_5
,sum(decode(month,'06',amnt,0)) m_6
from y
group by key;
SQL> select key
2 ,sum(decode(month,'01',amnt,0)) m_1
3 ,sum(decode(month,'02',amnt,0)) m_2
4 ,sum(decode(month,'03',amnt,0)) m_3
5 ,sum(decode(month,'04',amnt,0)) m_4
6 ,sum(decode(month,'05',amnt,0)) m_5
7 ,sum(decode(month,'06',amnt,0)) m_6
8 from y
9 group by key;
K M_1 M_2 M_3 M_4 M_5 M_6
A 2.5 4.5 0 0 0 0
B 0 0 0 0 2.5 0
C 2.5 2.5 2.5 2.5 2.5 2.5Well, maybe I'm lucky to understand here ?
SQL> select
2 key
3 ,max(loc) keep (dense_rank last order by
amnt,month) loc
4 ,sum(decode(month,'01',amnt,0)) m_1
5 ,sum(decode(month,'02',amnt,0)) m_2
6 ,sum(decode(month,'03',amnt,0)) m_3
7 ,sum(decode(month,'04',amnt,0)) m_4
8 ,sum(decode(month,'05',amnt,0)) m_5
9 ,sum(decode(month,'06',amnt,0)) m_6
10 from y
11 group by key;
K LOC M_1 M_2 M_3
M_4 M_5 M_6
A 1 2,5 4,5 0
0 0 0
4 0 0 0 0
2,5 0
3 2,5 2,5 2,5 2,5
2,5 2,5Nicolas.
This should be more a question for SQL and PL/SQL
Forum :
PL/SQL
start=0
Message was edited by:
N. GasparottoPerfect..... many thanks... and i am sorry i put this in this forum rather than in SQL/PLSQL... but you are the best!!
thanks to all of you.. -
Need Urgent Help with Curve 8520 Backup
Help urgently. I need to backup my Curve but the BB manager would not accept my pin. I am keying it in but the cursor is not showing any sings that it is being typed in. The phone is not accepting the password and it is one try away from cleaning the phone. I need to backup before that happens
Are you typing in your PN or your Password? If you're connected to the BlackBerry Desktop Software, you should be entering the device security password.
Often users who have multiple numerals in their password will only press the ALT key for the first numeral and not those following, so for instance, if your password were "1234", you might have been pressing "Alt 1234" on the device, which makes the actual password to be "1ers".
Does that make sense? Does it sound familar to your usage?
So check the way you enter your password on the device... do you think you are entering multiple numbers but actually are not?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I really need some help with rendering
I am creating a video for a client, and he is going to stream it through his own player. He requires the video to play using dimentions of 430 x 242.
He wants to keep the file sizes as small as possible.
I am currently creating his videos using a 1280 x 720 composition, as this is the same aspect ratio as his specific dimentions.
I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB, and I'm also trying MPEG4 but getting blurry, washed out results that look nothing like the preview in AE. I've tried Flash and it stutters.
My questions:
1. Should I render in 1280 x 720 and just ask him to re-size them through his player? (I assume most players can do this?) or should I render to the dimensions of 430 x 242? He doesn't have too much knowledge of video.
2. What is the best file format and settings?
3. Is it possible to re-set the render option defaults? I've played around with all of the setting so much that I can't remember how each file format was set before I started this project. I've tried re-starting AE but it still leaves me with the same settings as when I closed it.
Every time I post a question like this I get people telling me to 'read the basics' or 'we get asked this time and time again etc'. Please note that I have a disability and am finding this very tough - if it isn't too much trouble I'd just appriciate someone giving the information so that I can learn in from here. It will need to be explained simply as yes I am fairly new to AE.
I just can't seem to find anything which works. MPEG4's are giving me a suitable file size but then look blurred and washed out.
Many thanks for any help.First question: What player is your client going to be using to play this? Everything depends on that. For example, if he's going to be playing the file using QuickTime Player, then the answer is pretty easy: create a QuickTime movie (.mov).
> Should I render in 1280 x 720 and just ask him to re-size them through his player?
No, not if you've been told that he wants a 430x242 file. If you make a big movie (in terms of frame dimensions) and have him resize it, then you're going to create much larger files than necessary.
> I am unsure of the best settings to use for the best quality. I've tried MOV but am getting files that are 600+ MB
The QuickTime movie (.mov) format is just a container format. It can contain video encoded using any of a large number of codecs, with any of a range of quality settings. The default is a lossless compression (using the Animation codec) that creates perfect images at the expense of larger files.
After you've added your composition to the render queue, choose QuickTime as your format in the Output Module Settings dialog box and then click the Format Options button in the Output Module Settings dialog box. You can choose a compression type, set quality, et cetera. People seem to like the H.264 codec for a good balance of size and quality.
See "Encoding and compression options for movies" for more information.
Maybe you are looking for
-
Db2ldif with DS5.2 patch 6
I recently patched my DS with patch 6 so I am now at Sun Java(TM) System Directory Server/5.2_Patch_6 B2007.221.1746 (64-bit) starting up I used to run ./db2ldif -s o=education.ucsb.edu and get a nightly ldif dump of the root suffix. This ( after pat
-
Does anybody know the Big-Oh runtime notation for a Stack using an array. I need to find the runtime notation for each operation (push, pop, top, poAndTop) if the Stack has n items in it. Also the same for each Queue operations( enqueue, dequeue).. T
-
I'm having the same problem. My iPhone 5 has been "searching" for 24 hours. During that time, I've flown to different states with someone else who has an iPhone 5 with Verizon and who has not experienced any issues at all. Given that, location can be
-
Final Cut Express Crashes during rendering.
I am trying to render a series of mp4 video files. I have 86.5 GB free space, and when I try to render, after a few seconds, the Final Cut Express 3.5.2 Crashes. I have checked the update site, and I have installed the latest updates. This also occur
-
I have the thinkpad helix for two months. The front facing camera works fine, but rear facing camera is very slow: focus slow, and if move the camera a little, picture refreshes very very slow. I thought this was the problem of driver, so I updated