Really urgent: Collective display of material changes made f
hi,
i had been assigned a work in which i have to display that from this time period 1.12.2007 to 31.12.2007, these are the materials in which these are the changes made by these persons.
can anybody provide me tcode for this ,as help will be definately rewarded.
plzzz its really urgent.
HI,
BUT IWANT TO HAVE COLLECTIVE DISPLY FOR IT.
PLZZ DAT TCODE . I KNOW DAT DIS TCODE MM04 BU TIT SHOWS FOR SINGLE MATERIAL BUT I WANT IT FOR COLLECTIVE MATERIAL.
Similar Messages
-
Regarding display of material changes- really urgent
hi,
i had assigned a work in which i have to collect information that in the period from 1.12.2007 to 31.12.2007 the number of materials had been changed and what changes had been made to them.
plzz tell me about it as help will be definately rewarded.Hi,
PAss cdhdr-objectclas = MATERIAL
cdhdr-udate = sel. screen value
get all changenr from cdhdr
pass all to the cdpos-changenr & objectclas = MATERIAL
from cdpos-chngind = 'U' means material changed
and if chngind eq 'I' means material entry created.
else, MSTA is already there to just know which mat. created pass ersda value
and for changed pass laeda value.
Reward points for the helpful answer....
Regards,
Brijesh Patel -
Collective Display of Material excluded form MRP
Experts,
I am looking for a T-code or report which displays the demands for materials which are set to a specific Sloc & excluded from MRP. I can see the demands for a single material in MD04 but I am looking for a way for a collective display e.g. grouped by MRP Ctr or Sloc.
Thanks in advance
JörgHi dear,
U can make use of Transaction code MM60.
After entering plant execute report in the displayed report you can see MRP type column.
Items excluded from MRP will have MRP type as ND (No planning) -
ALE distribution of planned material changes made using MM12
Greetings,
I have searched and come up empty-handed looking for an answer, perhaps someone in this forum can point me in the right direction. I am trying to find out if there is a tcode and idoc message type that will distribute a planned material change, prior to it's activation, while it is still in it's planned state. While in the source system, I can see these changes in mm14, I do not see the "future" values as part of the MATMAS generated by a BD10, nor as part of the ECMMAS generated by a CC92 transaction. Ideally we could allow material master changes in our source system on a future date using the same ECM number as a BOM change for example, and distribute these changes together to the target system, prior to the ECM effectivity, without further requiring a additional BD10 to be performed after the material change activation date. Does anyone have advice on this? Thank you for any info you can provide.1. Activate change pointers
2. Customize it to check for status before activation and trigger the distribution. (I think it should generate even if the material is not activated so no customization required - but just test and confirm. It's been a while I've looked at this).
3. Maintain this in your distribution model and distribute master data accordingly. -
[JS CS3] Display number of changes made
My script does a simple GREP find/change:
app.findGrepPreferences.findWhat = "grepstringtofind";
app.changeGrepPreferences.changeTo = "";
myDoc.changeGrep();
Is there any way to have the script display the "Search is completed. 121 replacement(s) made." dialog box that appears when "Change All" is clicked in the GREP find/change UI? Or alternatively, to somehow programmatically count how many changes were made?app.findGrepPreferences.findWhat = "grepstringtofind";
app.changeGrepPreferences.changeTo = "";
f = myDoc.changeGrep();
alert ("Search is completed. " + f.length + " replacement(s) made.")
Peter -
Report of changes made by user to a material on a purticular date
hi,
i am working on report in which i have to display the changes made by user to a material on a purticular date.
i am able to display he all fields but i want to 1 more field which is in tcode MM04 i.e. text field(which means discription of te action taken).
i want to display this field plzz help me out as help will be deinftely rewarded.
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 1:45 PMit's possible that there will be no change document for it and in this case you will have an issue because you will have to directly check in the database or enhance this transaction with adding a change document in some customer exit or BADI.
I wish you good luck
/wg -
Urgent : Material Changed in a purticular month
hi,
i have to make reoport in whihc i have to diplay the changes made in purticular month along with following deatils:-
1.) Name of d person who made change.
2.) Which Tcode had been used to make the change.
3.) Description of changes made.
Currnetly i am using tcode MM04 in whihc it use to display the changes for 1 purticluar material and also i am using the Tables MSTA and CDHDR.
PLZZ HELP ME OUT IN SOLVING THIS PROBELM AS HELP WILL BE DEFINATELY REWARDED.
Edited by: ric .s on Jan 22, 2008 5:18 AMHi ric,
1.) Name of d person who made change.
You will get it in CDHDR-USERNAME
2.) Which Tcode had been used to make the change.
You will get it in CDHDR-TCODE
3.) Description of changes made.
You will get it in CDPOS-VALUE NEW(Changed Value)
You will get it in CDPOS-VALUE OLD (Old Value) -
Urgent: track changes made in qp02
hi all
i want to track the changes made in qp02
like we did in purchase order or req in the environment menu
i know the tables but i want to know
whether it can b shown in somewhere in tcode.
its very urgent
regardsHi,
Look for the change history in change header and change positions.
The tables are CDHDR and CDPOS.
Regards,
Renjith Michael. -
Tcode for displaying the changes made to sales order
hi,
i want to know is dere any tcode which displays how many times and by whom and what are the changes made to sales order.hiii
use VA03 for display..
also refer to following link
Regarding 'display of changes in the sales order'.
regards
twinkal -
Collective report on materials changes history
HI,
CAN ANY BODY TELL ME HOW TO GET THE REPORT IN COLLECTIVE MANNER FOR THE CHANGES HAPPENED IN THE MATERIAL MASTER(CHANGES IN DIFFERENT VIEWS WITH DATE & CHANGED BY) FOR A PARTICULAR MATERIAL TYPE.
REGARDS
R SEHGALDear Mr.Rakesh,
As explained by another friend Mr.Ram use MM04 or else,u can get this details in MM02,
or MM03.
<b>After entering the part no and selecting the views and after going to the display
mode or in change mode for a view,then in top click on environment menu -
Display Changes.</b>
You will be able to see the changes made,along with the used ID,Change number if ECM is used,time etc.
<b>If useful reward points and close the thread.</b>
Thanks & Regards
Mangal
Message was edited by:
Mangal
Message was edited by:
Mangal -
Really urgent: reagrding alv format for like (internal tables)
Hi,
I making a report in which i am using the concept of 2 internal tables and i am usnig the concept of likes in a internal table .
for instance,
DATA : BEGIN OF ITAB OCCURS 0,
ITEMID LIKE CHVW-MATNR,
WERKS LIKE CHVW-WERKS,
CHARG LIKE CHVW-CHARG,
SHKZG LIKE CHVW-SHKZG,
MENGE LIKE CHVW-MENGE,
MEINS LIKE CHVW-MEINS,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
MATNR TYPE BSEG-MATNR,
LIFNR TYPE BSEG-LIFNR,
AUGDT TYPE BSEG-AUGDT,
WRBTR TYPE BSEG-WRBTR,
END OF IT_BSEG.
and i am able to create ALV for 1 itab only as i had declared all fields in a 1 itab ,but now i have to declare 1 more itab and i dont know how to perform ALV with 2 itabs..
Plzz help me out as it is really urgent to me.
Edited by: ric .s on Apr 22, 2008 11:45 AM
Edited by: ric .s on Apr 23, 2008 7:21 AM
Edited by: ric .s on Apr 23, 2008 7:55 AMHi Ric,
Yes, You can .
Check the sample ALV program which helps u in displaying output using ALV . Comments have been made everywhere .
report zvenkat_alv_2_grid_description.
types:
begin of t_mard,
werks type mard-werks,
lgort type mard-lgort,
matnr type mard-matnr,
insme type mard-insme,
einme type mard-einme,
speme type mard-speme,
end of t_mard.
data:
w_mard type t_mard.
data:
i_mard type standard table of t_mard.
" ALV Declarations
" ALV internal tables and Structures
" To refer ALV tables(slis tables) and structures.SLIS must be
" declared under TYPE-POOLS(see below).SLIS is a Type group which is
" defined in Dictionary.Internal tables and structures and constants
" are defined under type group.(Double click on SLIS).
* Types Pools
type-pools:
slis.
* Types
types:
t_fieldcat type slis_fieldcat_alv,
t_events type slis_alv_event,
t_layout type slis_layout_alv.
* Workareas
data:
w_fieldcat type t_fieldcat,
w_events type t_events,
w_layout type t_layout.
* Internal Tables
data:
i_fieldcat type standard table of t_fieldcat,
i_fieldcat1 type standard table of t_fieldcat,
i_events type standard table of t_events.
*& START-OF-SELECTION
start-of-selection.
perform get_data_from_database .
" END-OF-SELECTION
" Steps to create simple ALV program
" 1. Pass an internal table with the set of output information
" 2. Pass a field catalog as an internal table
" 3. Pass a structure with general list layout details
end-of-selection.
perform build_fieldcatalog.
perform build_events.
perform build_layout.
perform display_data.
" Form build_fieldcatalog
" Fieldcatalog Internal table
" 1. It contains descriptions of the list output fields
" (usually a subset of the internal output table fields).
" 2. A field catalog is required for every ALV list output.
form build_fieldcatalog .
clear :
w_fieldcat,
i_fieldcat[].
perform build_fcat using:
"Field Int.Table Column headings
'WERKS' 'I_MARD' 'WERKS',
'LGORT' 'I_MARD' 'LGORT',
'MATNR' 'I_MARD' 'MATNR',
'INSME' 'I_MARD' 'INSME',
'EINME' 'I_MARD' 'EINME',
'SPEME' 'I_MARD' 'SPEME'.
endform. " build_fieldcatalog
*& Form display_data
form display_data .
data :program like sy-repid value sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = program
is_layout = w_layout
it_fieldcat = i_fieldcat
it_events = i_events
tables
t_outtab = i_mard.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " display_data
*& Form get_data_from_database
* text
form get_data_from_database .
clear :i_mard,
i_mard[].
select werks lgort matnr insme einme speme
from mard
into corresponding fields of table i_mard
up to 100 rows.
endform. " get_data_from_database
*& Form top_of_page
* text
form top_of_page.
data :
i_header type slis_t_listheader,
w_header like line of i_header.
data:l_date1 type datum,
l_date2 type datum.
w_header-typ = 'S'.
w_header-info = sy-title.
append w_header to i_header.
clear w_header.
w_header-typ = 'H'.
w_header-info = sy-repid.
append w_header to i_header.
clear w_header.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_header
i_logo = 'ENJOYSAP_LOGO'.
endform. "top_of_page
*& Form BUILD_FCAT
form build_fcat using l_field l_tab l_text.
w_fieldcat-fieldname = l_field.
w_fieldcat-tabname = l_tab.
w_fieldcat-seltext_m = l_text.
append w_fieldcat to i_fieldcat.
clear w_fieldcat.
endform. " BUILD_FCAT
" Form build_events
" Events
" 1. When we use ALV,certain events TOP-OF-PAGE ,END-OF-PAGE,
" AT LINE-SELECTION,AT USER-COMMANDs are not triggered.
" 2. To perform those Functions ,we have to build Events table and
" pass this table through REUSE_ALV_LIST_DISPALY Function.
form build_events .
clear :
w_events,i_events[].
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'TOP_OF_PAGE'.
append w_events to i_events.
clear w_events.
endform. " build_events
"& Form build_layout
" Layouts
" Use :We change the display of our list using layouts.
" ===
" Features
" ========
" The layouts that you can use vary according to the type of list:
" 1-->In all lists, you can do the following:
" (a).Choose one of the std layouts supplied with the std system.
" (b).Change the current layout of the list .
" 2-->In lists that use only the standard layouts in the std system
" you cannot save your changes to the current layout.When you
" choose the layouts, only the standard layouts will be proposed.
" 3-->In some lists, you can also save the layouts that you have
" defined as our own layouts.
" User-defined layouts are generally saved for all users. They can
" then be used by all users. All users will be able to choose from
" the user-defined layouts as well as the standard layouts.
" 4-->In some lists, you can also save user-specific layouts that you
" have defined . When you choose the current layout,only these
" layouts are available to you.
" 5-->You can delete or transport layouts, or define them as initial
" layouts
" 6-->STRUCTURE :SLIS_LAYOUT_ALV.
form build_layout .
clear:
w_layout.
w_layout-colwidth_optimize = 'X'.
endform. " build_layout
Regards,
Venkat.O -
Regarding MSC2N and MSC3N: Batch Display and Batch Change
Hello Guys,
I have faced a problem regarding batch display and batch change.
Scenario:
I have created a Process Order in COR1.
Using MIGO i made the goods receipt of that Process Order.
Now when i want to display for that particular material document number Details data..
In Batch --> Classification (you can check it also from MSC3N using the batch number of the particular material) there is a field named Availability Date its coming 0000/00/00.
But when i checked it from MSC2N in cange mode its coming with desired data.
Any valuable idea..
Regards,
SayakHi,
This looks like a SAP Functional Query. Please post this in MM forum for quicker replies.
Forums->SAP Solutions->ERP - Logistics Materials Management (MM) -
Hi all,
How can we check all the changes made to material as well as time and date of changes made to material
in mm60 it is showing date of last change but it is not showing what change has been made?
Regards,
SAGAR NEMANIHi,
Goto the Transaction MM02 -Change mode of material master
Enter the Details of the Organisation data and the Views
And in ENVIRONMENT---DISPLAY CHANGES you can get all the changes
regards,
santosh -
How to Track the changes made to the custom table field value
I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
KrantiHi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan -
My account was accessed and unauthorized changes made by We R Wireless
I recently became a ware of a very serious issue and have been getting little assistance from Verizon. My account was password protected and had only 3 people identified as having the ability to make changes on my account. I received a notice from Verizon regarding a change made on one of my lines. Upon review it was an unauthorized change to add "Total Mobile Protection" to one of my lines for $9.00 a month. Also in this notice was a credit which I was entitled to for a $10.00 Active Promotion. I believe this credit was placed on the account so that the change might slip by unnoticed. When I looked into the change it was made by a Representative from We R Wireless in Ship Bottom NJ. I have never been to this store nor have I spoken with anyone ever at this store.
After calling the store and confirming my account was accessed and unauthorized changes made, I was told by the manager that an employee had in fact accessed my account and made those changes. I still could not understand how it was possible for the changes to have been made without my password. The activity certainly looked very suspicious and I figured it had to do with commission to the representative for adding the insurance plan. This was denied multiple times by the manager of the store as well as the District Manager. In the meantime I had received multiple emails from We R Wireless in their attempts to "Make this go away"
What came next was the most disturbing and upsetting part of this situation. I was told by the District Manager of WE R Wireless that my information they had collected years ago during a purchase of a phone and activation INCLUDING MY PASSWORD and that they had kept it in their system!!
WE R Wireless had shared my personally identifiable information and Password to my account with Sales representatives at the Ship Bottom WE R Wireless store and that was how they accessed my account!!
As you can imagine I have now been receiving multiple calls from The Director of Retail Operations, Musafa as well as the Director of Operations, Jimmy. They are attempting to sweep this under the carpet and it is inexcusable and unacceptable. The reason for this post is to WARN others who may have made purchases at anytime at a We R Wireless store that they KEEP YOUR PASSWORD and employees are given the Passwords and have made changes to accounts. I cannot believe that I am the only one that this has happened to and I am concerned this is a widespread breech and more importantly is ILLEGAL.
I will keep this Board updated with developments but can tell you so far Verizon has not been very responsive to my concerns but this is unacceptable and I am thinking of contacting the FCC as well as an Attorney. In this day and age of Identity Theft this situation must be addressed by Verizon whether or not this was one rogue employee or not our PASSWORDS and other Information should never be shared nor kept without our knowledge.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon ModeratorI can only tell you that the Verizon rep from the Fraud department as well as Verizon's legal department contacted me and said under no circumstances are these companies to retain Customer Passwords. As you can see look at the potential for issues as evident in this situation.
As far as the FCC and their responsibilities this is directly from the website
The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories. An independent U.S. government agency overseen by Congress, the commission is the United States' primary authority for communications law, regulation and technological innovation. In its work facing economic opportunities and challenges associated with rapidly evolving advances in global communications
The agency investigates consumer issues such as Cramming which has occurred here if you go to the site you will see some of the recent fines for cramming levied by the FCC and it is a huge issue. A consumer does not get involved in legal fees the FCC is responsible to investigate consumer claims of fraud and regulates the industry. The Attorney General also takes this very seriously as well.
Cramming - Unauthorized Charges on Your Phone Bill
Cramming Settlement for Consumers Announced
Dec. 19, 2014: The FCC, along with the FTC and state attorneys general, announced a $90 million settlement with T-Mobile regarding unauthorized charges - commonly known as "cramming" - on phone bills.
Current and former T-Mobile wireless customers should review their bills and apply for refunds if they suspect third party charges were wrongly added to their bills at www.t-mobilerefund.com/
Sent from my iPad
Maybe you are looking for
-
How can I keep Mail in sync on two Macs?
One of the beauties of .mac seems to be that you can work on your email from various computers. Both my wife and I each have a Mac laptop, which we sometimes want to use interchangeably (webcam, size, portability reasons). We each have an individual
-
URGENT: Need help reading URL of current page
Hello kind people! I need help, and its very simple: How do i read the URL of a web page? For example, the URL of this page is: http://forums.sun.com/thread.jspa?threadID=5327796 So how can i be able to read in this URL in my java program? thanks SO
-
Is there any performance difference in the order of columns referencing index?
I wish to find out if there is any performance difference or efficiency in specifying those columns referencing index(es) first in the WHERE clause of SQL statements. That is, whether the order of columns referencing the index is important???. E.g. i
-
Why is the battery so short on the iphone 5, why is the battery so short on the iphone 5
Why is the battery so short on the iphone 5, why is the battery so short on the iphone 5. Is there a solution coming guys? I am getting a day at best from mine is that normal?
-
USB3 ports stopped working on MSI GE60 0ND-042US Notebook
That's it, the two USB3 ports on the front of the left side were working and now they don't work at all, no matter what I plug into them, USB3 drive, USB2 drive, USB mouse, etc. Nothing. Please help. I have rebooted checked the ports in the device mg