Really wavy footage when there's lateral movement? (looks like more than an interlacing issue)

So in the pic below, you can see when ever there is lateral movement (like the gentleman is doing moving from L to R, He gets really wavy... I'm not sure why that is... does anyone know (The footage is NTSC 29.97fps, 720x540
Thanks all!

Hi,
NTSC is usually 720x480, is 540 a typo? Please let us know the video source (DV tape?) and the Sequence Setting used in Premiere.
Right-click in the Program Monitor window and set fields to NONE and see how it looks, computers aren't that good at displaying interlaced video on their progressive displays and will give you a false impression. That said, it is possible your field order is reversed.
You can right-click a clip in the Bin and see what the Properties say, and there is the also the option of Modify > Interpret, which will allow you to change the field order if indeed there is a mismatch
But again, let us know as much as possible about the workflow that got you to this point
Jeff Pulera
Safe Harbor Computers

Similar Messages

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

Is there a way to "red eye" more than one photo at a time?

Is there a way to "red eye" more than one photo at a time?

No.
OT

Can rented movies be on more than one device at a time?

Can rented movies be on more than one device at a time?

No.
"You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time."
iTunes Store: Movie rental frequently asked questions (FAQ)

Is there a way to upload video more than 100 mb on...

100 mb is not a lot for a video taken with the N8. I have several videos much larger than this. I would like to upload them on Ovi, but I can't. Is there a way to upload video more than 100 mb on Ovi?

the space usage information is helpful, but I need to record longer. 9GB will not fill any of the new iPods. I'm trying to record longer than the 50 minute limit the current devices seem to have.

When i try to use my ipod it looks like the brightness was turned wayyyyy down. Like more than normal. I cant see anything. How do i fix it?

When i try to use my ipod it looks like the brightness was turned wayyyyy down. Like more than normal. I cant see anything. How do i fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

I don't load music, only audio books. When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2 are named 1a, 1b, etc.) , so when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

See this page from another forum member turingtest2. He might even chime in here if he sees it to offer any additional advice.
Audiobooks on iPods
B-rock

HT204380 Is there a way to talk to more than one person at a time on FaceTime?

Is there a way to talk to more than one person at a time on FaceTime?

No.
OT

HT1222 When there is a browser update like this Safari 5.1.4, Is there an article that instructs one the ideal way to update to a newer version of a browser like this newer version of Safari? Is it best to close Safari and all other apps, restart...

When there is an update to a newer version of a browser like this update to Safari 5.1.4, is there an article that goes over the best way to update to a newer version of a browser that one knows of? Is it best to close all apps, install the update, turn the computer off, turn it on and hold down the shift key until the gear and progress bar are showing, when this is finished, do a restart of the computer. I hav always wondered the best way (if there is a best way) to update to a newer version of a browser so you avoid potential problems. Is there a Support Article that goes over installing and updating to a newer version of one's browser, in this case Safari?
Thanks.

The following may or may not apply to Lion:
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Later versions of OS X.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

QUIKE TIME FROM FILE .MOV looks like tracking is messed up???????

HELLO I really need help with this i just started using quick time so i could view my videos file .mov i could'nt view before but now using quick time when i play it the sound is normal but the video it self it like jumps around and has lines through parts of it. It looks like when a vcr tape needs the tracking ajusted so its hard to view if anyone can help with this i would be so great full....Thanks so much

I have asked that your post be moved to the QuickTime Forum, where you will receive informed attention. Please read the information at the top of this Forum, it is only for comments and feedback about Discussions, not technical questions.

Exported movie looks like crap

I exported a 1080p home movie from iMove HD and it looks like garbage, pixelated and everything. The way I did this was: Share > Export using QuickTime. Then in the Options area I clicked on Size and selected 1920 x 1080.
After nearly 3 hours of export time, and a nearly 1 GB file size, it looked like crap.
So I tried it again, this time trying 1280 x 720, and it looked MARGINALLY better, but still not HD looking. What could be the problem?

I exported a 1080p home movie from iMove HD and it looks like garbage, pixelated and everything. The way I did this was: Share > Export using QuickTime. Then in the Options area I clicked on Size and selected 1920 x 1080. After nearly 3 hours of export time, and a nearly 1 GB file size, it looked like crap.
When you shared as "Export using QuickTime", did you then select the Export option "Movie to QuickTime Movie" and if so what Settings, for example, Apple Intermediate Codec, H.264, MPEG-4 Video or other. Perhaps you selected the Export option "Movie to MPEG-4" - not "Movie to QuickTime Movie". We need more details as to your Export options and format settings - there are many to choose from. Just saying that you used "Export using QuickTime" doesn't provide enough information unfortunately.
One critical consideration when exporting using QuickTime is the _Data Rate_. If this is set too low (when the option is presented) you will get poor results - "crap" as you say! I would suggest starting at a minimum of 5000 kbits/sec (5 megabits per second) and moving up from there until you see the quality you are seeking.
Anyway, if you are still there, please provide more information about your settings - particularly regarding the format (codec) and data rate if possible.
John

When in safari how can i have more than one window open?? New ios doesnt allow it.

Problem is when i updated to the newest ios 7. The dang thing doesnt allow me to have more than one window open at any time. This only makes things repetitive, complicated and slow. Moreover, the icons and overall view are probably designed to be in a kindergarden game, cos they look really stupid on iPad, whos gonna take apple seriously with this so called "improvements". If anyone knows how to open more than one window at at atime i,ll be really grateful to be told. Or if anyone can tell me how to uninstall the friking update i,ll be even more grateful. Thanx guys.
<Subject Edited by Host>

Tap "+" sign on top right.

Modbus Ethernet Slave seems to fail when the Master query information simultaneously for more than 16 Coils or Discrete Inputs.

I'm developing an control application by using the Modbus TCP/IP for communicating with the host computer.
I'm using the Modbus Library for LabVIEW
(http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_node=DZ52363&p_source=External).
The LabVIEW MB Ethernet Slave seems to fail when the MB Ethernet Master
query information simultaneously for more than 16 Coils or Discrete
Inputs.
The Modbus Application Protocol Specification (http://www.Modbus-IDA.org) state that:
1- The function code 0x01 'Read Coilsis' is designed to read from 1 to 2000 contiguous status of coils in a remote device.
2- The function code 0x02 'Read Discrete Inputs' is designed to read
from 1 to 2000 contiguous status of discrete inputs in a remote device.
To test the behaviour of the LabVIEW MB Ethernet Slave I have modified
the 'MB Ethernet Example Slave.vi' by adding more Coils and Discrete
Inputs. I have added up ONLY to 20 Coils and 20 Discrete Inputs.
By using the 'MB Ethernet Example Master.vi' the answer to the MB query
is correct for the first 16 Coils or Discrete Inputs. Starting from the
17th Coil or Discrete Input the MB Ethernet Slave doesn't give any
answer.
By shifting the start point address the answer remain correct for the first 16 Coils or Discrete Inputs.
I have tested the slave by using also a third part MB Ethernet Master and the behaviour is the same.
1) There is a reason for this behaviour?
2) There is a Modbus Library for LabVIEW that satisfy the 'Modbus
Application Protocol Specification' managing from 1 to 2000 contiguous
status of Coils or Discrete Inputs?
Thanks,
Asper

I have the same problem with the MB Ethernet.
I need 40 Outputs.
The first 16 work perfectly. The next 8 coils do not work, The next 8 work, The next 16 do not work,The next 8 work,The next 24 do not work And work for the last 8. Conclusion, to activate the 40 outputs, I needed 88 coils.
Because 48 coil, do nothing Can someone help me and i cant implemet the jim solution

DVD MOVIE LOOKS LIKE CRAP ON HD TV

Help!
My DVD movies look horrible on my 46" Samsung 1080p LCD television. I have made DVD movies featuring still images directly in iDVD as well as from iPhoto to iMovie to iDVD.
Many thanks.
Kristina

Thanks for replying! I am making these movies with
high resolution still images. These same images look
amazing on the screen shown through iPhoto. Can I not
maintain this quality in a DVD movie with the same
images?????
No.
NTSC DVD images are 640x480 pixels AT BEST - this is only 0.3 megapixels. There is absolutely no way such DVD images will match the quality of multi-megapixel digital cameras.
See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for more information about using still images in iDVD slideshows.

HT5731 Is there a new trick to buying more than one song at a time?

In the past I've bought more than one song at a time, its nit working though. Is there a new trick?

If by "in the cloud" you mean iTunes purchased tracks, deleting them from the device will not impact that. You will be able to redownload them later. To clear all tracks from the Music app: Settings app > General > Usage > Manage Storage [under STORAGE] > Music > All songs [swipe to the left] > Delete

Really wavy footage when there's lateral movement? (looks like more than an interlacing issue)

Similar Messages

Maybe you are looking for