Really weird exporting problem, HELP!!!!

I can't figure this out at all...
I am exporting a high res SD file (uncompressed) after having added a 1.66 matte, and it seems to be causing me to degrade the image. Could be interlacing, or could be resolution. But it definitely looks worse.
In FCP it looks great. I did a test export WITHOUT the matte, and it looks great. Then, when I add the matte (or try to crop it, as an alternative), the export suddenly looks degraded. Literally the only thing I've changed is the matte/crop (both yield the same result). How could it be possible that the image would so drastically change?
Again, both of these were exported straight out of the same sequence in Final Cut Pro, using the same exact export settings. I have a side by side picture, but don't know how to post it...
Thanks in advance!!!
Nick

Thanks for the responses-- here is a link (from another forum) for the picture.
http://forums.creativecow.net/readpost/8/1039888
If you zoom in, you can see the pixelation is pretty different on the matted version.
My export setting is Uncompressed 10-bit 4:2:2. These are the settings native to the original footage (off of digibeta). My intention is to NOT compress anything (at this stage).
The weird thing is that it can't be an export setting, right? Because the non-matted version looks fine, and is using the same exact settings.
It's just when the matte is added to the equation that things get wonky...

Similar Messages

Really weird laptop problem, please help!

Hi,
I just got a new laptop this weekend, Lenovo S205, everything is perfect and so far I love it.
However, one really weird problem i cannot find an answer for anywhere.
When I shut the laptop down it instantly restarts. Doesnt matter if I hold the power button down either, as soon as I let go it boots back up.
I have no peripherals plugged in or anything.
I'm totally stumped!!
Its really annoying as the only way to turn my laptop off is to unplugged the battery, or just let it run down.
Any ideas much appreciated.
j

Hi and welcome,
did you prove your energymanagement & a few windows settings at the end of this EM Settings in knowledgebase...
as well something could provoke restart instead of shutdown ...
Best is to exclude software failure, restore to factory condition with dvds .. Create Factory Disc
after factory restore ... if your S205 have same behaviour ...call your local service..
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

My iPhone 5 has been acting really weird someone please help

This is some of what has been showing in my diagnostics and usage
timestamp: 1390634449681
crashReporterKey: "bd3144f45cc1a08d4ff3d80caedfa4e17fa998dc"
isAnonymous: true
deviceConfigId: 301
investigationId: 0
model: "iPhone5,1"
softwareBuild: "11B554a"
firmwareVersion: "iBoot-1940.3.5"
basebandVersion: "5.02.00"
buildtype: "User"
metriclogs {
triggerTime: 1390634444592
triggerId: 520198
profileId: 301098
captiveSession {
    timestamp: 1390630591106
    result: 14
    isDetectedCaptive: false
    durationOnNetwork: 9902
    durationNetworkNotCaptive: 9902
metriclogs {
triggerTime: 1390634444620
triggerId: 520197
profileId: 301053
profileId: 301054
cellularGsmWcdmaCellInfo {
    timestamp: 1390631563660
    rat: SYS_MODE_WCDMA
    srv_status: SYS_SRV_STATUS_SRV
    mcc: 310
    mnc: 410
    wcdma_band: SYS_BAND_WCDMA_V_850
    dl_uarfcn: 4384
    psc: 80
    srv_domain: SYS_SRV_DOMAIN_CS_PS
    hspa: SYS_HS_IND_HSDPA_HSUPA_SUPP_CELL
cellularLteScellInfo {
    timestamp: 1390631629440
    phy_cell_id: 265
    dl_freq: 5780
    ul_freq: 23780
    dl_bw: 50
    ul_bw: 50
    freq_band_ind: 17
    num_mnc_digits: 3
    sel_plmn_mcc: 310
    sel_plmn_mnc: 410
    allowed_access: 0
metriclogs {
triggerTime: 1390638629567
triggerId: 520197
profileId: 301053
profileId: 301054
cellularGsmWcdmaCellInfo {
    timestamp: 1390635129996
    rat: SYS_MODE_WCDMA
    srv_status: SYS_SRV_STATUS_SRV
    mcc: 310
    mnc: 410
    wcdma_band: SYS_BAND_WCDMA_II_PCS_1900
    dl_uarfcn: 4359
    psc: 80
    srv_domain: SYS_SRV_DOMAIN_CS_PS
    hspa: SYS_HS_IND_HSDPA_HSUPA_SUPP_CELL
cellularLteScellInfo {
    timestamp: 1390635777055
    phy_cell_id: 265
    dl_freq: 5780
    ul_freq: 23780
    dl_bw: 50
    ul_bw: 50
    freq_band_ind: 17
    num_mnc_digits: 3
    sel_plmn_mcc: 310
    sel_plmn_mnc: 410
    allowed_access: 0
metriclogs {
triggerTime: 1390643869605
triggerId: 520197
profileId: 301053
profileId: 301054
cellularGsmWcdmaCellInfo {
    timestamp: 1390635129996
    rat: SYS_MODE_WCDMA
    srv_status: SYS_SRV_STATUS_SRV
    mcc: 310
    mnc: 410
    wcdma_band: SYS_BAND_WCDMA_II_PCS_1900
    dl_uarfcn: 4359
    psc: 80
    srv_domain: SYS_SRV_DOMAIN_CS_PS
    hspa: SYS_HS_IND_HSDPA_HSUPA_SUPP_CELL
cellularLteScellInfo {
    timestamp: 1390642205358
    phy_cell_id: 265
    dl_freq: 5780
    ul_freq: 23780
    dl_bw: 50
    ul_bw: 50
    freq_band_ind: 17
    num_mnc_digits: 3
    sel_plmn_mcc: 310
    sel_plmn_mnc: 410
    allowed_access: 0
metriclogs {
triggerTime: 1390648354629
triggerId: 520197
profileId: 301053
profileId: 301054
cellularGsmWcdmaCellInfo {
    timestamp: 1390646844914
    rat: SYS_MODE_WCDMA
    srv_status: SYS_SRV_STATUS_SRV
    mcc: 310
    mnc: 410
    wcdma_band: SYS_BAND_WCDMA_II_PCS_1900
    dl_uarfcn: 4384
    psc: 80
    srv_domain: SYS_SRV_DOMAIN_CS_PS
    hspa: SYS_HS_IND_HSDPA_HSUPA_SUPP_CELL
cellularLteScellInfo {
    timestamp: 1390647503732
    phy_cell_id: 265
    dl_freq: 5780
    ul_freq: 23780
    dl_bw: 50
    ul_bw: 50
    freq_band_ind: 17
    num_mnc_digits: 3
    sel_plmn_mcc: 310
    sel_plmn_mnc: 410
    allowed_access: 0
metriclogs {
triggerTime: 1390653704649
triggerId: 520197
profileId: 301053
profileId: 301054
cellularGsmWcdmaCellInfo {
    timestamp: 1390652759246
    rat: SYS_MODE_WCDMA
    srv_status: SYS_SRV_STATUS_SRV
    mcc: 310
    mnc: 410
    wcdma_band: SYS_BAND_WCDMA_V_850
    dl_uarfcn: 4384
    psc: 80
    srv_domain: SYS_SRV_DOMAIN_CS_PS
    hspa: SYS_HS_IND_HSDPA_HSUPA_SUPP_CELL
cellularLteScellInfo {
    timestamp: 1390650755956
    phy_cell_id: 265
    dl_freq: 5780
    ul_freq: 23780
    dl_bw: 50
    ul_bw: 50
    freq_band_ind: 17
    num_mnc_digits: 3
    sel_plmn_mcc: 310
    sel_plmn_mnc: 410
    allowed_access: 0
And this under GPUrestart?
Date:2014-01-24 17:01:01 -0700
Incident ID:BFE069A2-EE20-4F1E-B02B-D205B9D03C5D
Hardware Model: iPhone5,1
OS Version: iOS 7.0.4 (11B554a)
System ID:
2014-01-23 19:48:39 -0700 ReportCrash[4150]: core1_power:0;core0_isp_status1:0;last_submitted_stamp5:0;core1_event_status:68 429312;core2_use1_dm_slot:-1431655766;core1_use2_serv_pixel:96736;core1_use_coun t:4;current_stamp2:0;core0_use3_serv_pixel:82805;master_slc_ctrl_bypass:67108864 ;last_submitted_stamp0:10128805;core2_bif_fault:0;core1_isp_status1:0;hang_type: 1;core1_use0_dm_slot:-1431655766;core2_use0_serv_event:65536;core2_use3_serv_ver tex:66534;dpm_ta_global_list:65698;core1_use1_serv_event:65536;core2_isp_status1 :0;master_event_status2:16;core0_use2_serv_event:65536;core2_bif_bank0:458759;co re1_use3_dm_slot:-1431655766;core1_bif_mem_req_stat:0;master_slc_ctrl:4505600;is p_rgn_base:-1740308480;core2_use0_serv_pixel:95535;current_stamp6:5;core0_use2_s erv_vertex:66521;core0_event_status2:160;core0_power:0;isp_zload_base:0;isp_zlsc tl:0;last_submitted_stamp6:5;core0_isp_status2:15910;core1_use1_serv_vertex:6688 7;core2_use2_dm_slot:-1431655766;core2_use3_serv_event:65536;core2_clkgatectl:27 96202;core0_event_status:605300224;core1_isp_status2:15906;last_submitted_stamp1 :10128805;core0_bif_ctrl:0;core2_bif_ctrl:0;core2_use0_serv_vertex:67330;core_co unt:3;core2_power:0;core1_use0_serv_pixel:100280;core2_isp_status2:15396;master_ clkgatestatus:11;core0_use1_serv_pixel:86320;core0_use_count:4;core2_event_statu s:68429312;core1_bif_fault:0;core2_use3_serv_pixel:88663;current_stamp3:515081;c ore0_use0_serv_event:71546;core1_bif_bank0:458759;core1_event_status2:176;core0_ pds_pc_base:0;last_submitted_stamp7:5;core1_use3_serv_pixel:93383;core2_bif_mem_ req_stat:0;core0_use3_serv_vertex:66521;core1_pds_pc_base:0;current_stamp7:5;isp _zstore_base:0;master_clkgatestatus2:3;last_submitted_stamp2:0;master_event_stat us:536870912;master_clkgatectl2:681;core2_use1_serv_event:65536;core1_use2_serv_ event:65536;isp_stencil_load_base:0;core1_use2_serv_vertex:66877;core0_use3_serv _event:65536;core0_clkgatectl2:176851626;current_stamp0:10128798;core2_pds_pc_ba se:0;core1_bif_ctrl:0;dpm_ta_page_threshold:178;core1_clkgatectl2:176851626;core 2_use1_serv_vertex:66544;master_isp_rgn:12288;core2_use1_serv_pixel:91888;master _bif_int_stat:524288;core2_clkgatectl2:176851626;core0_bif_fault:0;last_submitte d_stamp8:0;core2_event_status2:160;core2_clkgatestatus:0;current_stamp4:515081;m aster_slc_status:0;core0_bif_bank0:458759;last_submitted_stamp3:515085;core0_use 0_serv_vertex:67340;core1_use1_serv_pixel:96421;core0_use2_dm_slot:-1431655766;c ore0_use2_serv_pixel:86245;core0_clkgatestatus:0;core0_bif_int_stat:524288;isp_s tencil_store_base:0;core0_pds_debug_pc:0;core1_use0_serv_event:65536;current_sta mp8:0;core0_use1_serv_event:65537;core2_bif_int_stat:524288;core2_pds_debug_pc:0 ;master_bif_mem_req_stat:0;stamp_count:9;core1_use3_serv_vertex:66878;master_bif _fault:0;core1_use1_dm_slot:-1431655766;current_stamp1:10128785;core1_clkgatectl :2796202;core2_use_count:4;core2_use2_serv_vertex:66523;core0_use0_dm_slot:-1431 655766;core0_bif_mem_req_stat:0;core0_clkgatectl:2796202;last_submitted_stamp4:5 15085;core2_use2_serv_event:65536;core0_use3_dm_slot:-1431655766;core1_use3_serv _event:65536;core2_use0_dm_slot:-1431655766;current_stamp5:0;core2_use3_dm_slot: -1431655766;master_isp_status:1;core1_clkgatestatus:1572920;core0_use1_serv_vert ex:66538;dpm_pds_page_threshold:0;core0_use0_serv_pixel:89945;core2_use2_serv_pi xel:92196;core1_use2_dm_slot:-1431655766;core1_bif_int_stat:524288;core1_use0_se rv_vertex:67676;core1_pds_debug_pc:0;dpm_zls_page_threshold:128;core0_use1_dm_sl ot:-1431655766
Is there anyone that can tell me a little bit about what is going on?

I've restored it several times with no backup at all and it doesn't seem to help. Almost all of my apps crash I have deleted almost all of them hoping if it was a memory prob it would be fixed but no the main one is safari it crashes all the time. It also just acts really weird. When I am typing anything on safari the letters will drag and then slowly catch up when I'm typing. It will also go to a different kind of screen format like its trying to figure out if it's a computer or phone when I rotate the screen. I have go in and delete the website data and clear everything almost everyday and it still does this. Hope that helps, if you have any idea on what's going on or any other advice on how to fix I'd love the help thanks

Really weird WiFi problem with original iPad, please help!!!

Hey everyone so I recently inherited an original iPad from my uncle who stopped using it because of WiFi issues. Unfortunately he didn't do much to try to figure out the problem and there's no warranty on it but I'd really like to fix it!
The problem is that it doesn't display nearly any available networks under the WiFi settings, but it DOES seem to show and connect to unsecured networks (and works really well...I'm in a hotel typing on it right now). But at home, in the hotel room, at my uncles place, etc...no networks show up. Also I can't connect to them if I enter manually.
So far I've tried a hard reset, fully restoring, resetting network settings, and resetting all settings...I would take it to Apple but there's no warranty
Any ideas of how I can fix this potentially?
Thanks!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Really weird network problem... Please help!

This is really starting to tick me off, so I hope you can help me. This isn't exactly Archlinux related, but the problem persists on the whole network regardless of OS being used.
Ok, so I got my new D-Link 5-port switch home a few days ago. I wanted to hook up my laptop so it could access the internet.
I'll try to illustrate how the layout of the network is made up in my home:
Internet -------> Router -------> Switch -----------> My dad's computer
|
-----------> My switch -------------> My main desktop
|
-------------> My laptop
As you see, we split the internet between our 3 computers, where 2 of them are mine, and 1 is my dad's. The problem is, that we can't run more than 2 computers online. DHCP just won't function.
If I have both of my computers online, my dad can't connect to the internet. If my dad has his computer online, I can't connect with 1 of my computers. So we are constantly only able to be 2 on the internet. I see no logical explaination for why this is happening, because the internet is split on the first switch, to my dad and me, then from my own switch, I split my connection between my 2 computers.
Please help me, this is really giving me an edge. I REALLY hope you can help

SomeoneWithAPurpose wrote:IP-Address: 87.58.149.226
That confirms my suspicion.
I think I can explain the problem. Every computer that connects to a network needs an IP address. Normally you connect a router to the internet and the router gets a public IP address from the ISP's server. This is the address that people see when you connect to their sites. When you connect your computer to the router, the router gives you a different IP address. that only people on your LAN can see. The router can give several addresses because they are only used on the LAN, so you can connect multiple computers to it and each one can get a unique IP address. When you connect to the internet, your computers communicates with the router using private IP addresses on the LAN, then your router communicates with computers on the internet using public IP addresses.
In your case, your router is not configured to give out IP addresses. Instead, when you connect you are getting a public IP address directly from the ISP's server. Your ISP only has 2 public IP addresses that it can give you so that is why you cannot connect more than 2 computers at a time. You need to configure your router to act as a gateway between your LAN and the internet. To do this, you have to access the router's menu and set up a dhcp server (which gives out IP addresses on the LAN) along with a firewall and whatever else you need (your current setup makes your computer directly accessible from the internet which can be unsafe, especially when running Windows).
Oh damn.
I went downstairs to find out where the manuals for the router were... Turns out we don't have a router ...
All we have is 3 boxes; A internet phone adapter, a ethernet xDSL modem and a switch. Maybe this is why it's all ****ed up? Sorry for the misleading, but my dad always told me that we had a router. =\
Ah... yeah, that's a problem. What brand is the modem? Maybe it has some router functionality anyway.
Last edited by Xyne (2009-04-26 00:43:04)

Really weird sound problem with rhythmbox[SOLVED]

Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
Last edited by klohs (2009-05-15 13:34:46)

I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

Really weird jvm problem...

Hi,
I just deployed a webapp of mine in Weblogic 10.0 and I get this very weird error when I try to acces a specific part of my webapp.
java.lang.AssertionError: FIXME andyp 1-Jan-04 -- unreplaced JVMID: 6344131804612400084S::dads11644:myserver
at weblogic.rjvm.JVMID.writeExternal(JVMID.java:846)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1282)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
Truncated. see log file for complete stacktrace
What does this means? The exact same code was working fine under Weblogic 8.1 SP5 with jdk 1.4.2_013. It seems to be related to the jvm (Weblogic 10 now uses jdk150_06), but I really dont know what to do with this error. The code that throws this error is a serialization of a bean object (writeObject method of ObjectOutputStream throws this to be specific), but it was working fine before, so I really doubt there is anything wrong with my code. the bean that is serialized is quite simple and everything that is not a String is declared transient.
I also tried launching WLS with jrockit90_150_06, but I get the same error.
Any help would be greatly appreciated.
Thanks

You may need to look into the System Preferences> Network control pane
and see what the configuration(s) are; the order of preference to use
dialup, ethernet, and airport/wireless. Also you may need to see how the
network controls "see" your local wireless connection once you select to
have the AirPort at the top of the list and set to connect via airport; plus
with the Airport icon set to appear in the menubar.
The "Network Port Configurations" is where you can see and checkbox
some of these items, and for others you'd need to look a little further and
wider. I seldom look into mine, even though I run between wireless and
ethernet and sometimes have dialup, airport and ethernet all active in this.
But only use one at a time, and primarily am using one means of connecting
to the internet active at once; chosing to uncheck boxes and/or drag the
order of them accordingly in the configuration panel.

Really weird connection problem

Hi, I'm having a really strange problem here - at least I think so. Recently one of my roommates bought a new wireless adapter (802.11g), which I would really like to use as it's faster than my old Airport Snow basestation (802.11b). I'm using a Powerbook G4 with an Airport Extreme card running OS X 10.4.7. Here's the actual issue: Whenever I try to connect to my roommates network my PB tells me everything's fine. I get full signal strength in the menu bar and Iternet Connect tells me that I#m connected to the network. When I try to use mail or a webbrowser, however, it doesn#t work. Mail tells me I#m not online and Safari comes up with an error message: #You are not connected to the internet.'
I know my Airport card works as I can use my own slower network. In addition, my roommates network also works as he has no problems using it. I should probably mention that he's using a PC notebook (Dell). If that works a Mac should too. Any ideas what's going on? What should/could I do? Do I have to change any settings/preferences? I know PCs give you a million things to change in order to go online.
Thx a lot for your help.

You may need to look into the System Preferences> Network control pane
and see what the configuration(s) are; the order of preference to use
dialup, ethernet, and airport/wireless. Also you may need to see how the
network controls "see" your local wireless connection once you select to
have the AirPort at the top of the list and set to connect via airport; plus
with the Airport icon set to appear in the menubar.
The "Network Port Configurations" is where you can see and checkbox
some of these items, and for others you'd need to look a little further and
wider. I seldom look into mine, even though I run between wireless and
ethernet and sometimes have dialup, airport and ethernet all active in this.
But only use one at a time, and primarily am using one means of connecting
to the internet active at once; chosing to uncheck boxes and/or drag the
order of them accordingly in the configuration panel.

Export problems - HELP!!

I've got an irritating problem with my first FCP movie that I have just completed. After exporting the project as a QT Movie and burning it to DVD I sat down to watch it on my TV only to find that the bottom of the screen had been cut off. Which meant that none of the subtitles I had created in FCP were visible on TV. HELP PLEASE!!
Mac OS X (10.4.5)

My guess is that you didn't use the TV safe guides in the CANVAS...nor did you monitor your cut on a TV attached to your systems. Both pretty big musts.
There is a drop down menu above the Canvas that looks like a box. Click on that and select TITLE SAFE. You might have to choose SHOW OVERLAYS...I am not sure.
TVs all have what is known as OVERSCAN...part of the plastic of the TV that overlaps the tube in order to keep it in place. This is why the TITLE safe guides exist. The TITLE safe consists of two boxes. The outer one is the TV safe area. Meaning that anything within that is guarenteed to show up and not be cut off. The inner box is TITLE SAFE...where you keep your titles and subtitles inside of...so that there is space between them and the edge of the monitor.
Shane

Subreport Export Problem - Help !

I've developed a report viewer application using Visual Basic 6 and Crystal Report 8.5.
The application has a problem when using report with sub reports. The application always export a blank report (no data) although i have set a parameter value programmatically.
Here is the code to export sub report :
Set crSubReport = crMainReport.OpenSubreport("Test")
Set crSubReportParamDef = crSubReport.ParameterFields("InsertLocation")
crSubReportParamDef.AddCurrentValue "ALL"
crSubReport.EnableParameterPrompting = False
crSubReport.Export True
If i check IsCurrentValueSet property value after AddCurrentValue, the value is always False.
Is my code have a problem ?
The sub report successfully exporting the report, when i use parameter prompting features.
Please help ...
Regards

I don't think I'm getting the full story here. I can not level this:
crSubReport.Export True
with this;
"Method 'ReportSource' of object 'ICrystalReportViewer5' failed"
How can you get the viewer failing on an export call?
Not knowing how the two above relate, I'm not sure what to recommend...
Try to create a new app and see if you get the viewer error? Or if it will let you export?
Also, I do not think you sent the full export code? E.g.; report.export true. How do you set the format and destination?
Ludek

Premiere Pro CS3 Export problem. help please.

is it normal when i try to export in H.264 Blu-Ray format, there's 3 files created when finished?
Sequence 01.m4v
Sequence 01.m4v.xmpses
and Sequence 01.wav.
and when i try to open m4v there's no sound?
maybe its really for Blu-Ray.
there's really no way to export it with good image quality for youtube and ESPECIALLY, best sound quality ( at least PCM 16-bit 48-Khz or higher )
im REALLY surprise it can't export in AVI.

Welcome to the forum.
In your Export setting, go to Multiplex Settings, and chose anything except "None." Then, you will get a multiplexed file, with both the Audio & Video Streams in one file. See this article for more detail: http://forums.adobe.com/message/3557964#3557964
Good luck,
Hunt

Really weird ipod problem that i cant find info on

Okay, so i took my ipod to my dad's house over the weekend and his computer messed it up. Now when i import songs, they appear to convert to the ipod when I'm in itunes, but once i unplug the ipod from the computer (and yes i do eject it first) the songs disappear. For some reason i can't ad any songs to my ipod anymore. Earlier some weird message about a corrupted file chklis/file7 or something along that line at least came up. And well, I have no idea what to do. Ive been searching for help all night and i havent found any yet.

Assuming that your computer recognizes the iPod is connected, check out the instructions/suggestions here.
Music from iPod to computer.
There's also another method I've seen posted. I've successfully tested this across several different Windows PCs.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
However it appears that no playlists or any other info such as ratings/last played etc will transfer.
If this is important to you, you may want to use other options.
There's Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer.

Really weird sound problem

I have a 1st gen 32 GB iPod touch running iPhone os 3.1.3. and I am having a very strange problem where I cannot hear any vocal track on movies or music. I can hear any sound effects or music just fine, but talking or singing cannot be heard. On some songs I can hear some echoing vocals but it is clearly not right. I have gone to the Apple Store where we performed a full reset. I have used multiple headphones, and tried many different files and the problem persists. If I connect the iPod to an external stereo with the ipod connector everything works fine. the problem is limited to headphones. Have any of you run into this problem? If so was there a fix?

I have the same problem with my Ipod touch 8GB running the new os 4.0 (the newest update..cant remember it exactly). Its really irritating, i've had it since december and it just happened yesterday with the dodgy vocals. My sound fixes itself if i press down on the front of the ipod touch on the right of the home button, so my guess is a loose connection in the headhphone jack which is reconnected upon pressure being applied, but releasing pressure means the problem occurs again. I;ve reset, restored and even cleaned out the headphone jack with no results.
Im going to be taking my Ipod to an apple store to get this probelm resolved as i am still under the warranty so lets hope it gets fixed or replaced.

Really Weird CS5 problem?

I have an action which resizes and sharpens for printing.
I have used it all through CS4 without problem.
I saved it out of CS4 and loaded it into CS5.
It works fine in CS5.
A file produced by the action in CS5 is identical in all respects that I can see to a file produced by the action in CS4. Same pixel dims, same actual size, same profile, same ppi.
All exactly as expected.
BUT my Shiraz RIP server sees the CS5 file as a different size (4.17 x bigger linear) and rejects it as too big.
So there is something about the CS5 produced file which is different.
I have tried this on different images, always the same.
Perhaps I am doing something daft, but what?!
(Mac Pro 2006, 4x 2.66, 8 Gb RAM, CS5 running in 32 bit mode.
Shirax 6.4, Epson 4800)
Thanks for any help!

More investigation and I can re-state the problem:
1.Starting point a PSD file which CS4 and CS5 report in Image Size as:
Width 4879 pixels
Height 6903 pixels
Width 16.263 inches
Height 23.01 inches
Resolution 300 pixels/inch
2."Save as" jpeg in CS4 and CS5 produces jpegs of same dimensions of course.
3. Submit the CS4 created jpeg to Shiraz and it is reported with same dimensions as 1.
4. Submit the CS5 created jpeg and it sees it as:
Width 4879 pixels
Height 6903 pixels
Width 67.764 inches
Height 95.875 inches
Resolution 72 pixels/inch
5. Save original PSD as a TIFF and submit to Shiraz and it sees it correctly as 300 ppi.
Something about CS5 jpegs is causing Shiraz to see the res as 72 ppi.
I have tried all different jpeg save options.
Hope this restatement may trigger some other ideas.

Really weird keyboard problem with my macbook.

Hi Everyone,
I've been having an unexplainable keyboard problem all day now. The keyboard on my Macbook is unresponsive, and the trackpad is stuck on right click. BUT when I plug in a USB keyboard, both my macbook keyboard and my trackpad work after I restart. They continue to work for a little while, but a couple minutes after I unplug the USB keyboard, the both stop working again. I can't seem to figure out what the problem is. Is there anyone out there that has any experience with something like this?
Thanks!

If cleaning your keyboard does not help, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
How to remove and clean your Macbook Pro Keyboard
Cleaning Macbook keys after a spill

Really weird exporting problem, HELP!!!!

Similar Messages

Maybe you are looking for