Really weird problem while Print to Video

Hi.
I've tried to fix this problem by searching this forum but I couldn't find any solution so I have no choice but to ask for help.
Basically when I'm trying to Print my NTSC DV project to tape through firewire enabled camcorder, I can see video with weird gray block all over with no sound. Same thing happens when I'm trying to preview the project through my camcorder.
I even exported my project and imported it into imovie hd 6 and tried to export to tape but same result.
My camcorder is Sony HDR-HC5 (HDV) and the setting in both my camera and Final cut pro 6.0.2 is correctly set up.
Strange thing is, when I'm using HDV1080i60 preset in Final cut pro, log and capture works flawlessly, but somehow I can't even choose HDV device under video playback. I can see all the HDV settings but they are all gray and can't select any of them.
I remember being able to print DV project to my camcorder with same settings using Final Cut 5.1.4 so I really can't figure out what is wrong with all these.
Any kind of input would be appreciated.

Just curious. How do you get your computer too see the HVR. I am using I movie HD and it does not see anything. Is there a camera setup procedure? I looked at the vague manual which was no help.
Thanks in Advance
Thom

Similar Messages

I'm having a problem while recording a video

'm having a problem while recording a video
When the memory card and the highest quality ..
Stop and is working
I recorded video works normally on the memory card.

Nokia C5-00 5MP

Really weird problem -- won't download mail from one sender

I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.

I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
Ernie

Font problem while printing russian characters

Hello,
I have a weird problem. When I print an exported crystal report document which has been exported by Crystal Reports for Eclipse 2.0 as PDF document, the printout misses a lot of russian characters. This area with the missing characters just stays blank, not even question marks or something similar is shown. It seems that the half of all characters of the document is not shown.
(But the document does not contain any missing characters when you just open it in Adobe Acrobat. You only see this behaviour when you print it. That's why we didn't recognize this error for a long time because we didn't print it but just opened it with Acrobat Reader)
I have an original document with russian characters which is saved as docx. When I export this document with MS Word to PDF and print this document, no characters are missing. So it's no printer problem.
There is a difference in both documents:
This document, where all characters work, has the following properties set in the font information tab:
Arial
   type: TrueType
   encoding: Ansi
   original font: ArialMT
   original font type:: TrueType
The document which has been created with Crystal Reports for Eclipse 2.0 just contains the following data:
Arial
   type: TrueType
   encoding: included
(I hope the right translation for this option set is "included" because my version of Adobe Acrobat is a non english version).
What exactly happened to this document. How can I solve this that russian fonts will be print correctly?
Regards,
Markus

By the way. I create the files in this way:
   private void createFile(String outFileName) {
      try {
         ByteArrayInputStream result = clientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
         File newFile = new File(outFileName);
         FileOutputStream output = new FileOutputStream(newFile);
         int bytesRead = 0;
         byte[] byteArray = new byte[10000];
         while ((bytesRead = result.read(byteArray)) != -1) {
            output.write(byteArray, 0, bytesRead);
         output.flush();
         output.close();
      } catch (Exception e) {
         e.printStackTrace();

Problem with Print to Video in FCP 6.0

In the past I have been able to print to video with FCP 5, now not working with FCP 6. My Sony HVR A1U is seen by FCP, I can log & capture no problem. When I go to print to video, the sequence does not show up on my camera LCD and I cannot capture it. I have checked the system profiler and under firewire the camera is listed. In the print to video window I have checked Automatically Start Recording, but this has no effect.
Thank you for your advice

Just curious. How do you get your computer too see the HVR. I am using I movie HD and it does not see anything. Is there a camera setup procedure? I looked at the vague manual which was no help.
Thanks in Advance
Thom

Problem while printing 132 col. report....

We have one report of width 132 columns. But when we print this report,
it prints only upto half width (Approx. upto 70 characters.)
We are using Reports 6i on Red Hat Linux server.
I tried to modify report width at developing time. But it is of no
use.
Which parameters needs to be changed to solve this problem?
Thanks...
Kiran.

Hello Abid,
I tried as you suggested. But problem is not solved.
But when I run this report in Windows environment, it prints ok. i.e. I am getting full width of report. What I notice here that while printing thru Windows, I am geeting 'US STD FANFOLD' paper size . But in Red Hat Linux (Advanced Sever 2.1) I am not getting this page size. SO I think if I have this page size in Red Hat then my problem may get solved. Have you any idea how can we get this page size in Red Hat ?
Thanks.... Kiran

Problem while printing in ukraine language using smart form

Hi All,
Am facing an issue while printing the quality certificate in Ukraine language. I have created the smartform in English,later I maintained the transalations in Ukraine. I will execute the print program by passing the delivery number in selection screen.
The problem is in print preview every thing is coming fine in Ukraine language except the ship-to party address,But when I issue the print only the ship-to party address in coming in UK rest all are coming as junk characters. Am using HELVCYR font. I have tried creating form in UK as well but same result.
Other Ukraine documents are printed correctly using the same printer.
Please tell me what could be the problem here?
Thanks in advance.
Regards
harris

Hi Harikrishna,
Which printerdevice you using .Is it supports uk language.Try to findout proper printer device for this.

Really weird problem with Usage Tracking!

Hi guys
We are running OBIEE 11.1.1.6.5 on Exalytics and allmost all is fine and dandy. We have though one weird problem. When we first enabled usage tracking, we sudddenly got some errors on some of our dashboards, saying that we didn't have the privilegies to create temporary tables. Allright we got our user (which is a shared user) the privilegies to create temporary tables, and the reports with the problems started working again! Awesome! But low and behold - then Usage Tracking stopped working, not a single mentioning in the logfiles about it. Maybe an error or, the acknowledgement that Usage Tracking has started, which is the normal.
So basically we are running without Usage Tracking because the reports that gives us the problems are deemed more important... which they might be, but thats different story...
Any ideas to what is going on here? We have collected Usage Tracking data, while the reports were broke, so im quite confident that the setup is correct. But why would it stop, when giving "create table" privilege to our shared user?
Best regards, Jacob

What is the setting for UsageTrackingDirectInsert?
Have you tried chaging the output to file instead of database?
Please see:
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/usage_track.htm#i1017237
Section 9.3, "Setting Up a Log File to Collect Information for Usage Tracking"
Michael
PS:
Hi Christian! :)

Really, really weird problem involving iPhone and Exposé

Hey Mac users, try to figure this one out, this started happening to me today:
My iPhone is rarely near my Mac Pro, but today I set it on top of my Mac Pro to let it charge. When it's connected to the Edge network, and there's network activity, I get the usual "beepbeepbeep" through my system's speakers, except now there's a twist. Whenever I hear the network activity interference, Exposé on my Mac Pro flips out, and acts as if I pushed the "Show/Hide Desktop" button a whole bunch of times. It stops when the activity stops.
It's not reproducible all the time, and only happens every once in a while. But it definitely only happens during Edge network activity. I've never gotten it while in 3G or Wifi modes.
I am guessing that the Edge signal is interfering with my Apple Bluetooth Keyboard, or something. I don't have any keys mapped to "Show Desktop," though.
If anyone has any thoughts on this, I'd love to hear it. This isn't a really big problem, I just keep my phone away from my Mac Pro now.

If you go into settings - general - about it will give you the version, the latest one is 2.0.1. Updating your phone may solve the problems. Failing that, take it to your nearest Apple store for advice.

REP-1849: Failed while printing : Problem while printing on network printer

I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Problem while printing through citrix

Dear Gurus ,
We are facing the problem during printing through citrix .
When we print locally without using citrix were able to get the proper print as it displayed in the spool .
But When we try to take the printout of document having say 12 colum , only 10 colums r coming asthe print out .
Please suggest as the views on this issue are valuable
Thanks in advance .
Chirag Kohli .

Hi
I am facing same problem
Please let me know if you get any solution
Thanks
Rakesh Patel
[email protected]

Problem while printing

I am using adobe acrobat professional 8.1. while printing the printout will be jumbled. For this if i use print as image option an advanced, i will get the correct printout, if i give print as image the file size will be heavier, and printing gets slow. i am using windows xp professional, and thosiba E studio200 printer. please help me. thank u
vijay

hi! Krishna Kumar
Check whether the Print immediately option is checked in Print properties.
else
if you have created a new print format for you Program , check whether that format has been Transported to Production.
Regards,
Nagulan

Page number problem while printing

We are unable to get the page number while printing from SAP, we are trying to print a word document from SAP and when it prints the page numbers do not appear properly. if we save the document to the desktop and print, it prints properly.
We print to a Xerox 7345 printer...we have loaded the exact driver, but still does not print. Can anything be done from UNIX side for this.
the page number appear as 0/9 0/9...where it should appear as 1/9, 2/9..etc..
Any help is highly appreciated, Hope there are some good Basis guys out here.

Hi Aakash,
Is it from report or SAP Script?
Regards,
Atish

I am having some really weird problems with my Iphone with photos and music!

I am having some really strange problems with my Iphone with photos and music. In my photos icon I have a bunch of albums but the pictures are all synced to the wrong albums. The pictures are just all mixed up and in the wrong albums. As far as my music problem. In my playlists for my music I am trying to rearrange my songs in a particular order of listening. It lets me do it but when I hit done it randomely changes them in puts them in all different orders. Can anyone help?

This indicates a corrupt file(s). A restore should resolve.

Really Weird Problem AIM account won't let me video

Here is the weird situation I'm dealing with. Hope this makes sense.
I have an iMac, three MacBooks and a MacBook Pro.
For...each member of our family.
So, we are enjoying video chatting. Everything fine, but....my son can't video chat. He can log in with AIM and we can text chat, but no video.
Hardware problem?
Nope. I logged him with his AIM account to another computer under guest mode. No dice.
AIM issue?
Maybe? I created a new AOL screen name and password for him! Still no dice, from any computer.
He doesn't even show up in iChat's buddy list when we add him.
Everyone else in the family is just fine. And we are video chatting back and forth across all of our computers.
My son however does not show up when we add him as a buddy. His name comes up, fades in and out, then just disappears.
So....what could it be? I set him up in .Mac and....of course...no problems! Video chatting works like a breeze.
Does anyone have any clue what could be going on???
I'm about to go nuts.

Five computers EACH ??!! Now that is just greedy.
However on you Son's Mac User Account (Users/(his account)/Library/Preferences get him to delete com.apple.ichat.AIM.plist and com.apple.ichatAgent.plist and restart iChat.
We need him to get a full login before looking at the rest of you.
This is the first post that suggests nthat a Buddy not staying in the list is a problem at their end.
He should also check the View Menu of iChat and see that he has Show Video Status active (ticked).
5:20 PM Friday; December 28, 2007

Really weird problem while Print to Video

Similar Messages

Maybe you are looking for