Realm not shown in jdeveloper human workflow Identity Lookup window

I have a BPEL process with a human task. When a configure the human task and bring up the identity lookup window, select my SOA managed server, I get jazn.com in the realm list but the domain security realm's name is "myrealm" and does not show up in the pulldown realm list. I have the Red Hat LDAP configured in the security realm, and the admin server sees the LDAP users.
I saw a similar thread that mentioned the managed server hostname must be specifiied fully qualified. I modified the hostname configuration for my managed server to include the FQ hostname and this did not fix the above decribed problem.
Jdeveloper 11.1.1.3
Weblogic 11g
SOA Suite 11g
Read Hat Linux

I've got the same problem, does any one tell how to fix this? Thanks very much~!!

Similar Messages

  • I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    See if this helps:
    https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html

  • Why the word "secured" is not shown on my wireless network SSID in windows 7 ?

    hi friends
    i have a windows 7 installed on my laptop. i newly have deployed a Dlink access point.  i have setup  WPA/WPA2 PSK for authentication.
    when i click on wireless network list on the right button of the taskbar, system shows my SSID but it hasn't the orange exclamation mark which states "secured".
    what should i do so that the word "secured" appear there?
    thanks in advance

    It would be better to check settings in the Dlink access point.
    If there is an orange bubble or an exclamation mark it tells that your network is open or unsecured.
    Maybe, the settings are okay in the Dlink access point if there aren't any bubbles.
    hi . thank you very much.
    yes you are right, my question is wrong.
    when there
    is not an orange bubble or an exclamation mark, it tells that network is secured. so every thing is ok

  • Report Painter - data not shown at first selection

    Hello,
    we have a Report Painter report for cost centers.
    If we start the report with normal selection the values of the cost centers are not shown at the first look.
    The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
    "This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
    But there are values, but they are only shown if we switch to another cost center and then switch back.
    All rows that are selected the first time show no values, at the second time the values are there.
    Does anybody know the reason for this?
    Thank you & regards
    Britta

    Hello,
    starting the report with the selection of a cost center group.
    This group is shown on the left side, the values in sum of the right side.
    To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
    To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
    Clicking on the next cost center also the "no data" information is shown.
    Now switch back to the first cost center on the left side and then the values are shown on the right side.

  • Workflows not shown in the front end but exists in LDAP

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

  • JDeveloper 11.1.1.5.0 ADF Library task-flow not shown

    fyi
    Please consider the example application created using JDeveloper 11.1.1.5.0
    at http://www.consideringred.com/files/oracle/2011/TestsInADFLibraryApp-v0.01.zip
    (in the context of forum thread "JUnit test classes in ADF Library")
    At some point, working with that application in JDeveloper 11.1.1.5.0, I used the deployment profile "adflibTestsInADFLibraryApp-ViewController-dp" to create the ADF Library "adflibTestsInADFLibraryApp-ViewController.jar" wich seemed to have an issue.
    When in a File System Connection on the Resource Palette, that ADF Library did not show the task-flow(s) it contained.
    But, I can no longer reproduce this. If I now try to do the same, the ADF Library seems to be OK. The only thing I can think of that changed, is that JDeveloper has been restarted (a day later).
    Showing both ADF Libraries in File System Connections on the Resource Palette illustrates this
    at http://www.consideringred.com/files/oracle/img/2011/task-flow-not-shown-jdev111150.png
    When I looked inside the ADF Libraries, the respective "task-flow-registry.xml" files were somewhat different:
    - in the "broken" ADF Library there were lots of XML namespace declarations
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="WEB-INF/btf/browse-employees-btf.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="browse-employees-btf" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="task-flow-definition" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="true" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="META-INF/adfc-config.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="false" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    </task-flow-registry>- in the "ok" ADF Library there was only one XML namespace declaration
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
       <task-flow-descriptor path="WEB-INF/btf/browse-employees-btf.xml" id="browse-employees-btf" type="task-flow-definition" uses-page-fragments="true" library-internal="false" train="false"/>
       <task-flow-descriptor path="META-INF/adfc-config.xml" id="" type="" uses-page-fragments="false" library-internal="false" train="false"/>
    </task-flow-registry>- (q1) How can these not shown task-flows (or its different task-flow-registry.xml file) be explained?
    many thanks
    Jan Vervecken

    Thanks for your reply Chris.
    Chris Muir wrote:
    a) When you say you've "used the deployment profile" I'm guessing you mean within JDeveloper and not via ojdeploy? ...That is correct.
    ... it seems you're doing the ADF Library generation inside JDev, not via ojdeploy via Ant correct? ...That is correct.
    ... (For reference the bug numbers are 10028879, 10028816, 913159). ...On My Oracle Support I have found:
    - bug 10028879, "OJDEPLOY FAILS TO COMPILE/GENERATE TASK-FLOW-REGISTRY.XML WHEN ${USER.DIR} USED" (having "Base Bug 10076058" which does not seem to be published)
    - bug 10028816, "OJDEPLOY FAILS TO GENERATE TASK-FLOW-REGISTRY.XML FOR CASE-INSENSITIVE WIN PATH" (and a patch)
    - for number 913159 I got "No results found" (which might be an unpublished bug, or a wrong number)
    ... by that stage I was sick of logging bugs against ojdeploy. ...Really, where did it hurt. ;-) ... logging bugs should not be a problem ...
    b) Regards the File System Connection in the Resource Palette, are you using an UNC mapping? ...No UNC mapping, just the local file system.
    ... The relating bug numbers are 9340973 and 12940696. ...On My Oracle Support I have found:
    - bug 9340973, "RESOURCE PALETTE FAILURE ON USING NETWORK PATHED FILE CONNECTIONS" (having "Base Bug 12940696" which does not seem to be published)
    - for number 12940696 I got "No results found" (which might be an unpublished bug, or a wrong number)
    So, about "I don't think these are related but let's rule them out", I think those are ruled out.
    regards
    Jan

  • Workflows are not shown in the OAM aplications front end but exists in LDAP

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

    Edit the targetNamespace to any name less than 60 chars and they try again
    Regards,
    Prateek

  • Workflow template not shown in list workflow setting

    I created a new list, a new site content type, and new reusable workflow. The site content type is added to the list.
    Worked fine at the Dev environment.
    Deployed the workflow to UAT environment as WSP file and list as a list template.
    In UAT, a new site content type is created and added to the list.
    The WSP was activated and feature enabled. But the workflow is not associated with the site content type, instead associating with all site content type.
    Then use copy and modify to associate the workflow with the right content type. It works. Save and publish the workflow.
    Go to List, Workflow settings, click on Add a Workflow, the workflow template is not shown in the workflow template drop-down. Even when the associated content type is all, the workflow should display in the workflow template drop-down in list workflow settings.
    Save and publish the workflow a couple of times, ususally the issue will be resolved. But not this time..
    Please help!! Thanks a lot!!
    Feng Wan

    Hi Prabhakar ,
    just give a try for following program .
    Use program RHMOVE30 - enter object type WS, and your WF number. Use eval path TASKHIER.
    Use the dropdown on the request parameter to create a transport request.
    When you get the result list, make sure your task is selected for transport then use the option to include it in the Transport.
    You should then be able to go to txn SE09 and see your task has been assigned to the transport.
    You can then transport your task.
    Regards,
    Shounak M.
    Message was edited by: Shounak  M

  • Own workflows not shown in trx. SWDM

    Hi,
    On a 4.7 was 6.20 level 59 own Workflows are not shown in trx. SWDM if they are assigned to a custom package.
    If I assign these to package Z001 they are shown in trx. SWDM.
    Any Ideas?
    Best regards
    Torsten

    Hi Torsten,
    Your own workflows only show up in local objects if they are assigned to a package that is NOT linked into the application hierarchy.  Once they use a package in the application hierarchy you need to use that hierarchy area in the search range instead.
    The quickest way to see what hierarchy a workflow has been assigned to is to display the workflow in PFTC_DIS - the initial screen should show you the hierarchy area assigned, e.g. PA-ER.
    The other way to reliably get a list of your own workflows is to put them in your own task groups - and then put the task groups in the search range.  This also has the advantage of working in all environments (as local objects also only works in the development environment, i.e. the local system/client of the workflows).
    Task groups have the advantage of greater control - i.e. you can make sure only your own workflows and tasks are in there and are not mixed up with standard workflows/tasks.
    Regards,
    Jocelyn

  • Identity Lookup Dialog (JDev) doesn´t found the realm

    Hi
    I´m creating a BPEL process with a Human Task. When I edit the .task file, open the Identity Lookup Dialog on JDeveloper (to choose the task owner) and select a Integration Server Connection (which points to a BPEL Server on a Linux box), no realms are retrieved from the BPEL Server.
    It sounds like the Identity Provider is not configured on the BPEL Server, but when I open the Worklist I am able to logon using "jcooper"/"welcome1", which is a sample user in the jazn.com provider...
    Any help?
    Thanks.

    Hi
    Thank you, in fact there was no IdentityService WebService running, it was a BPEL server instalation mistake. The folowing applications are installed on the "home" container, instead of "bpel" container":
    hw_services
    orabpel
    orainfra
    ruleauthor
    rulehelp
    I don´t know if it is possible to install them in a different container other than "bpel", but in this way it is not working...
    I will check about it with support.
    Thank you again.

  • 10.1.2. to 10.1.3 Human workflow task migration issue

    Hi all,
    I am currently looking at the possibility to migrate our 10.1.2 bpel processes, containing human workflow task, to 10.1.3.1.0 Everything seems to migrate smoothly except the human workflow functionality.
    The initateTask invoke action returns the following error in the 10.1.3.1 console when I ran an 10.1.2. bpel process containing a human workflow task:
    [2006/12/04 03:01:00]
    "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown.
    - <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    - <part name="code">
    <code>
    WSDLReadingError
    </code>
    </part>
    - <part name="summary">
    <summary>
    Failed to read wsdl.
    Failed to read wsdl at "http://xesoa1.iteye.local:8894/orabpel/default/TaskActionHandler/TaskManagerService.wsdl", because "Failed to read WSDL from http://xesoa1.iteye.local:8894/orabpel/default/TaskActionHandler/TaskManagerService.wsdl:WSDL not found".
    Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.
    </summary>
    </part>
    </remoteFault>
    I know that in 10.1.3 the human workflow mechanism is heavily changed and now is invoked by using other services (TaskService) than the services used (TaskActionHandler process)in 10.1.2. In 10.1.2 the TaskActionHandler was a separate build-in bpel process used for interaction between a bpel process and the human workflow. This process is not present in the 10.1.3.1 installation, so that is causing my error. Moreover, in 10.1.3 the interaction between a bpel process is and the human workflow is not done by invoking a separate bpel process (TaskActionHandler) but by invoking a java wsif service TaskService..(Correct me when I'm wrong or not complete)
    My question now is how can I migrate my 10.1.2 human workflow task to 10.1.3.1 without manually rewrite the task scopes to 10.1.3...According to the fragment below copied from the JDeveloper 10.1.3.1 help files it should be possible. Maybe, there's is a way to deploy the needed processes manually?
    Oracle BPEL Process Manager Workflow Services 10.1.2 and 10.1.3.1.0 Compatibility
    For release 10.1.3.1.0, the workflow wizard has been replaced by a Human Task editor. This editor enables you to specify task settings such as task outcome, payload structure, task participants, assignment and routing policy, expiration and escalation policy, notification settings, and so on. You cannot use the Human Task editor to edit 10.1.2-based workflows. To use any new 10.1.3.1.0 functionality, the task scope of the workflow must be manually migrated to use the new workflow metadata. Note also that this is the last release in which you can deploy workflows designed with 10.1.2.
    Kind regards,
    Tom Hofte

    Hi Clemens,
    Thanks for your quick response. The Taskmanager and the Taskactionhandler are indeed not deployed so I will do that automatically.
    Still one question/remark left:
    You noticed that you still have to complete the tasks using the old worklist app. . So if i'm correct, you have to use the deprecated 10.1.2 worklist api or build-in worklist app. The 10.1.2 worklist app is not deployed in my 10.1.3 installation. However, 10.1.3 only contains the new worklist app. Is there also a way to deploy it manually?
    Writing this down it al looks a bit clumsy to me. Is it not a better option to invest some time in migrating all tasks scopes manually to 10.1.3, because as far as I can see the human tasks are causing the main issues concerning migration? After this you have a 10.1.3 compliant system. I wonder what your opinion is on this issue.
    Kind regards,
    Tom

  • Not able to access human task form (11.1.1.4)

    I installed SOA Suite with BPM Suite 11.1.1.4. I ran into quite a few issues. The biggest one is I am not able to access the human task form in BPM workspace even for the new application created in 11.1.14.
    Do you have such issue? I am not sure if it is a bug or is related to my specific installation. I followed the document “Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.4.0) Version 1.6” for the installation. The only difference is that I installed the generic version of WebLogic and JDev and configured them to use JDK 64-bit version since my OS is windows 7 (64-bit). Before, I had installed 11.1.1.3 with 64-bit and it was working fine. The only tool installed with 32-bit is the JDev 11.1.1.3. Since JDev 11.1.1.4 is supporting 64-bit, I installed everything with 64-bit for this time.
    The details of the error are the following:
    With JDev 11.1.1.4, I created a new application which has a simple BPM process with 3 flow objects: start event-user activity-end event. The human task has the auto-generated task form. I deployed the application to the SOA server.
    When testing the application, the task was created and listed in the BPM workspace. But when I clicked the task link to open the task form, the web page was hanging. I noticed the following log was REPEATED again and again in the access.log:
    140.98.125.168 - - [20/Apr/2011:10:28:08 -0400] "GET /workflow/TestpsUI/faces/adf.task-flow?bpmWorklistTaskId=2a5b4ad1-823f-4615-8a7e-c5449a7be814&bpmWorklistContext=12aa4934-991a-487c-b7f3-5159808c399a%3B%3BtbcZXSd1E1LVZv8OIaLZGd21meLUMNkYSMsmz60kNKoEaJ1N53wy3zyRYA%2BunyKF9UNi50fPHKtaXY6IqKbh%2Fu68WebTan3zCwGsUNmNMaw8aLEygS5qb2cOGx2qGal86F%2FgiRka874PYLXhohFdDPCQyoxre2p7IgpsloLHq2rh7T3zWGnyOjLdC7Qw0Geb20Kfp8XA2UUIoxaxTHS6YFPQqqs%2FzIkyEsgMNQJMDbYYGdceRL2sT8rMkBXpmQ0r&bpmWorklistHttpURL=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces&bpmWorklistHome=home.jspx&bpmWorklistReassign=reassignTask.jspx&bpmWorklistRoute=routeTask.jspx&bpmWorklistRequestInfo=requestInfo.jspx&bpmWorklistSecurity=signTask.jspx&tz=America%2FNew_York&lg=en&cy=US&vr=&dispNameLg=en&dispNameCy=US&dispNameVr=&df=medium&dt=both&tf=short&bpmWorklistSessionTimeoutInterval=900&soaUrl=http%3A%2F%2F140.98.125.168%3A7001&bpmBrowserWindowStatus=taskFlowReturn&adf.tfDoc=%2FWEB-INF%2FHumantask_TaskFlow.xml&adf.tfId=Humantask_TaskFlow&_task-flow-return=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces%2Fadf.task-flow-return%3F_adf.ctrl-state%3De1i6yi1gq_35&_adf.winId=e1i6yi1gq_26&_afrLoop=7156779026094&_afrWindowMode=0&_afrWindowId=null HTTP/1.1" 200 5478
    Please help if you know what is going on for the issue.
    Thanks a lot,
    Helen

    Go to OEM, select the SOA Composite application you deployed.
    Under Component Metrics … click the link of the Human Workflow Component that you have the issue
    The settings of the Human Workflow Component would be displayed
    Click the Administration tab, you will get the URI setting for the human task
    update the Host name etc. as you want and click "OK" then click "Apply"
    Please note: this is just a shortcut for my own dev-env. I have not got the time to figure out why this happens. It is sure not the right solution for the production if we have the issue in the prod-env, I think.

  • Bpm process is not shown on bpm workspace but i see exception on the server

    Hi Gurus,
    When i try to deploy a simple BPM composite i am getting below exception.
    deployment goes fine but when you open BPM workspace to initiate a instance , bpm process is not shown on bpm workspace instead i see below below error can anybody help me on this
    ===================
    ttp://www.omg.org/bpmn20}task>,<{http://www.omg.org/bpmn20}terminateEventDefinition>,<{http://www.omg.org/bpmn20}text>,<{http://www.omg.org/bpmn20}textAnnotation>,<{http://www.omg.org/bpmn20}throwEvent>,<{http://www.omg.org/bpmn20}timerEventDefinition>,<{http://www.omg.org/bpmn20}transaction>,<{http://www.omg.org/bpmn20}userTask>
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.handleEvent(UnmarshallingContext.java:642)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:254)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:249)
         at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportUnexpectedChildElement(Loader.java:116)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext$DefaultRootLoader.childElement(UnmarshallingContext.java:1049)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext._startElement(UnmarshallingContext.java:478)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.startElement(UnmarshallingContext.java:459)
         at com.sun.xml.bind.v2.runtime.unmarshaller.SAXConnector.startElement(SAXConnector.java:148)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1329)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:211)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
         at javax.xml.bind.helpers.Abstrac
    2013-05-19T03:09:26.301-05:00] [soa_server1] [TRACE] [] [] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: e44dcdbf35e56301:-9a14728:13ebbc2239d:-8000-00000000000016a2,0] [SRC_CLASS: oracle.bpel.services.workflow.client.config.ClientConfigurationUtil] [APP: OracleBPMWorkspace] [SRC_METHOD: getClientConfiguration] WorkflowServiceClientContext: Cannot find client configuration file: wf_client_config.xml
    [2013-05-19T03:10:40.511-05:00] [soa_server1] [ERROR] [] [oracle.bpm.common] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: e44dcdbf35e56301:-9a14728:13ebbc2239d:-8000-0000000000001815,0] [APP: OracleBPMWorkspace] [[
    javax.xml.bind.UnmarshalException
    - with linked exception:
    [org.xml.sax.SAXParseException: <Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.]
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:315)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:514)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:215)
         at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:184)
         at oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader.load(BPMN20Loader.java:110)
         at oracle.bpm.project.io.serializers.model.DefaultModelFormat.loadBPMN20CompliantModel(DefaultModelFormat.java:383)
         at oracle.bpm.project.io.serializers.model.DefaultModelFormat.loadInternal(DefaultModelFormat.java:399)
         at oracle.bpm.project.io.serializers.model.DefaultModelFormat.load(DefaultModelFormat.java:62)
         at oracle.bpm.project.io.serializers.model.DefaultModelFormat.parse(DefaultModelFormat.java:182)
         at oracle.bpm.project.io.fs.loader.ProcessesLoader.loadObject(ProcessesLoader.java:89)
         at oracle.bpm.project.io.fs.loader.ProjectModelLoader.loadObject(ProjectModelLoader.java:63)
         at oracle.bpm.project.io.fs.loader.ProjectModelLoader.loadObject(ProjectModelLoader.java:29)
         at oracle.bpm.project.io.fs.FileProjectLoader.createFromXml(FileProjectLoader.java:148)
         at oracle.bpm.project.FuegoProject.createFromXml(FuegoProject.java:901)
         at oracle.bpm.client.internal.processmodel.marshalling.ProcessModelLoader.parse(ProcessModelLoader.java:137)
         at oracle.bpm.client.internal.processmodel.marshalling.ProcessModelLoader.unmarshall(ProcessModelLoader.java:72)
         at oracle.bpm.client.internal.processmodel.ProcessModelServiceRemoteClient.getProcessModel(ProcessModelServiceRemoteClient.java:50)
         at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcess(SessionProcessManager.java:317)
         at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcess(SessionProcessManager.java:119)
         at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcesses(SessionProcessManager.java:142)
         at oracle.bpm.papi.ora.ProcessServiceSessionAdapter.processesGet(ProcessServiceSessionAdapter.java:1359)
         at oracle.bpm.workspace.model.common.PapiBean.getProcesses(PapiBean.java:3099)
         at oracle.bpm.workspace.adf.model.common.BaseViewBean.initProcesses(BaseViewBean.java:600)
         at oracle.bpm.workspace.adf.model.common.BaseViewBean.getAvailableProcesses(BaseViewBean.java:316)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at javax.el.BeanELResolver.getValue(BeanELResolver.java:261)
         at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
         at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
         at com.sun.el.parser.AstValue.getValue(Unknown Source)
         at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
         at org.apache.myfaces.trinidadinternal.taglib.ForEachTag.doStartTag(ForEachTag.java:117)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag12(__search_jsff.java:750)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag11(__search_jsff.java:712)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag10(__search_jsff.java:650)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag3(__search_jsff.java:310)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag2(__search_jsff.java:250)
         at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag0(__search_jsff.java:139)
         at jsp_servlet._jsf._view._search.__search_jsff._jspService(__search_jsff.java:100)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag23(__viewpresentationnormal_jsff.java:1194)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag22(__viewpresentationnormal_jsff.java:1131)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag12(__viewpresentationnormal_jsff.java:734)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag5(__viewpresentationnormal_jsff.java:383)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag4(__viewpresentationnormal_jsff.java:326)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag3(__viewpresentationnormal_jsff.java:281)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag2(__viewpresentationnormal_jsff.java:233)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag0(__viewpresentationnormal_jsff.java:133)
         at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspService(__viewpresentationnormal_jsff.java:94)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
         at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag6(__viewpresentationfixed_jsff.java:407)
         at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag5(__viewpresentationfixed_jsff.java:353)
         at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag2(__viewpresentationfixed_jsff.java:238)
         at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag0(__viewpresentationfixed_jsff.java:133)
         at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspService(__viewpresentationfixed_jsff.java:94)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag23(__masterdetails_jsff.java:1180)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag22(__masterdetails_jsff.java:1120)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag21(__masterdetails_jsff.java:1072)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag20(__masterdetails_jsff.java:1027)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag19(__masterdetails_jsff.java:982)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag18(__masterdetails_jsff.java:938)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag6(__masterdetails_jsff.java:414)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag5(__masterdetails_jsff.java:367)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag2(__masterdetails_jsff.java:252)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag0(__masterdetails_jsff.java:139)
         at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspService(__masterdetails_jsff.java:100)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)

    The above issue is seen when we don't have proper FP patchset. after applying a patchset all issues sloved

  • My i phone 4 is water damaged and it is working but network not shown so please help me

    my i phone 4 is water damaged and it is working but network not shown so please help me

    A replacement iPhone is usually a refurbished iPhone that has received new battery and case and repair of anything that may have been faulty.  The refurbished iPhone is indistinguishable from a new iPhone.  A number of the regulars on here prefer the refurbished Aplle products because they have been so thoroughly tested.
    A replacement iPhone is identical to the original, same color, capacity, and so on.

  • Programatical checking of checkbox is not working in Jdeveloper 11.1.1.3.0

    Hi,
    I've a table whose first column is a checkbox bound to a ViewObject attribute(SelectFlag).
    I've another checkbox placed on column header for Select-All feature.
    The functionality is that when we check Select-All checkbox, it should check checkboxes for all the rows(first column) and when we uncheck Select-All checkbox, it should uncheck checkboxes for all the rows.
    I've the partial trigger on table for the Select-All checkbox.
    Here is the ValueChangeListener code for Select-All checkbox:
    public void checkAll(ValueChangeEvent valueChangeEvent) {
    Boolean isSelected = ((Boolean)valueChangeEvent.getNewValue()).booleanValue();
    System.out.println("New Check Value:"+isSelected);
    ViewObject vo = getIteratorBoundVO("KrcCapabilitiesVO1Iterator");
    vo.clearCache();
    vo.reset();
    vo.setWhereClause("KrcCapabilitiesEO.ACTIVITY_ID = 446");
    vo.executeQuery();
    while(vo.hasNext())
    Row row = vo.next();
    if(isSelected){
    row.setAttribute("SelectFlag",true);
    System.out.println("Checked Value for CapabilityId :: " + row.getAttribute("CapabilityId"));
    else{
    row.setAttribute("SelectFlag",false);
    System.out.println("Unchecked Value for CapabilityId :: " + row.getAttribute("CapabilityId"));
    This code is not working in latest Jdeveloper version 11.1.1.3.0 which uses WebLogic Server Version: 10.3.3.0
    It's working fine in Jdeveloper version 11.1.1.1.0 which uses WebLogic Server Version: 10.3.1.0
    Is this a bug? Can anyone help me on this please.
    Thanks,
    Bhaskar

    Hi Frank,
    Thanks for your response.
    You are right, the selection state is not shown in the table.
    I'm taking the ViewObject from Iterator Binding.
    Here is the entire code:
    public static Object evaluateEL(String el){
    FacesContext facesContext = FacesContext.getCurrentInstance();
    ELContext elContext = facesContext.getELContext();
    ExpressionFactory expressionFactory = facesContext.getApplication().getExpressionFactory();
    ValueExpression exp = expressionFactory.createValueExpression(elContext,el,Object.class);
    return exp.getValue(elContext);
    public static ViewObject getIteratorBoundVO(String voIterator)
    DCBindingContainer dcb = (DCBindingContainer)evaluateEL("#{bindings}");
    DCIteratorBinding dciter = dcb.findIteratorBinding(voIterator);
    dciter.invalidateCache();
    ViewObject vo = dciter.getViewObject();
    return vo;
    public void checkAll(ValueChangeEvent valueChangeEvent) {
    Boolean isSelected = ((Boolean)valueChangeEvent.getNewValue()).booleanValue();
    System.out.println("New Check Value:"+isSelected);
    ViewObject vo = getIteratorBoundVO("KrcCapabilitiesVO1Iterator");
    vo.clearCache();
    vo.reset();
    vo.setWhereClause("KrcCapabilitiesEO.ACTIVITY_ID = 446");
    vo.executeQuery();
    while(vo.hasNext())
    Row row = vo.next();
    if(isSelected){
    row.setAttribute("SelectFlag",true);
    System.out.println("Checked Value for CapabilityId :: " + row.getAttribute("CapabilityId"));
    else{
    row.setAttribute("SelectFlag",false);
    System.out.println("Unchecked Value for CapabilityId :: " + row.getAttribute("CapabilityId"));
    Thanks,
    Bhaskar

Maybe you are looking for