Realtek alc850 problem

I don't know what's happening. Yesterday the sound was ok . after a change to bios i ve restarted my pc and the sound card wasn't recognized and it was enabled in bios! couldn't figure out why so a used jbat jumper to clean bios configuration...after that realtek was regognized by windows and drivers are instaled properly but i still have no sound. in windows media player the playback starts but i can't hear anything.. also jaud jumper is set to 5,6 9,10 ... can anyone help me ?

Dear Deathstalker
well just in case you can help me here it is
K8N Neo-FSR MS-7030
Athlon64 2800+ (1.8Ghz)
Nvidia Geforce FX5200
2x WD S-ATA 80GB 7200rpm 8MB
Pioneer DVR 109 DL dvd-rw 16x
Realtek 7.1 (alc850)
Win Xp Pro SP1
T&P-IT IT-400W ATX
Also i believe that every single hope never dies... the only one who dies it's you expecting things go better
so i hope that telling my hardware will help at this kind of problem , and i hope i won't die before it's solved
thanks for your attention
P.S. Tell your friend to go to church and pray... you never know

Similar Messages

Realtek RTL8188CE problem

Hi all,
I'm running into problems with the wifi card on my new Christmas present. It's a Realtek RTL8188CE. When I booted the Arch netinstall image I could get it to associate to the access point but it wouldn't pick up an address. I ended up doing the base install using a Mint live cd. Had no wifi problems at all in Mint. When I booted back into the Arch base system I again had no problem associating with the access point and picked up an address after 2 or 3 attempts. However, the network still disappears every few seconds. When I try to ping google I'll get 8 or 10 returns and then 15-20 lines of network unavailable then a few returns again and so on.
Any ideas?
Thanks...

On my laptop, I cannot get an IP adress...
root@theodore:~|⇒ lspci -nnk | grep -iA2 net
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196]
Kernel driver in use: rtl8192ce
03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05)
Subsystem: CLEVO/KAPOK Computer Device [1558:4140]
Kernel driver in use: jme
root@theodore:~|⇒ rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
root@theodore:~|⇒ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
root@theodore:~|⇒ cat /var/log/everything.log | grep -e rtl -e firmware -e wlan -e wpa -e etwork | tail -n55
Jan 9 19:43:11 theodore kernel: [ 5728.251545] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:17 theodore kernel: [ 5734.516618] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:23 theodore kernel: [ 5740.782225] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:30 theodore kernel: [ 5747.050581] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:39 theodore kernel: [ 5756.443892] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:40 theodore kernel: [ 5756.942751] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 19:43:41 theodore kernel: [ 5758.231396] wlan0: authenticate with 'MAC2' (try 1)
Jan 9 19:43:41 theodore kernel: [ 5758.233104] wlan0: authenticated
Jan 9 19:43:41 theodore kernel: [ 5758.233154] wlan0: associate with 'MAC2' (try 1)
Jan 9 19:43:41 theodore kernel: [ 5758.241721] wlan0: RX AssocResp from 'MAC2' (capab=0x401 status=0 aid=1)
Jan 9 19:43:41 theodore kernel: [ 5758.241730] wlan0: associated
Jan 9 19:43:55 theodore dhcpcd[7382]: wlan0: broadcasting for a lease
Jan 9 19:46:54 theodore kernel: [ 5951.426319] wlan0: deauthenticating from 'MAC2' by local choice (reason=3)
Jan 9 20:14:17 theodore kernel: [ 7591.439953] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 20:14:17 theodore kernel: [ 7591.939273] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Jan 9 20:14:19 theodore kernel: [ 7593.214648] wlan0: authenticate with 'MAC2' (try 1)
Jan 9 20:14:19 theodore kernel: [ 7593.222380] wlan0: authenticated
Jan 9 20:14:19 theodore kernel: [ 7593.222440] wlan0: associate with 'MAC2' (try 1)
Jan 9 20:14:19 theodore kernel: [ 7593.420634] wlan0: associate with 'MAC2' (try 2)
Jan 9 20:14:19 theodore kernel: [ 7593.620348] wlan0: associate with 'MAC2' (try 3)
Jan 9 20:14:19 theodore kernel: [ 7593.820049] wlan0: association with 'MAC2' timed out
root@theodore:~|⇒ dmesg | grep rtl
[ 32.900575] rtl8192ce 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 32.900584] rtl8192ce 0000:02:00.0: setting latency timer to 64
[ 33.247447] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 33.247618] rtlwifi: wireless switch is on
[ 4482.954309] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4508.421414] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4526.530448] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4532.418261] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4535.989218] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4539.320451] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 4549.201949] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
Last edited by LC (2012-01-09 20:14:00)

RealTek sound problem

Hello guys,
I'm running Windows XP Professional and I'm having one problem with my K8T Neo-FIS2R -- the onboard sound. When I run the speaker test mode, the right side plays perfectly. But when I test the left, I get nothing from it, and actually, I even get a tiny bit of sound from my right one. I did download the newest RealTek drivers for XP. I can't really think of anything else to try?
I always have my Hercules Game Theater XP as backup, but I'd like to get this working if possible.
Thanks.

https://forum-en.msi.com/index.php?threadid=41862&sid=
try the latest drivers.

Crashes when rendering /Realtek drivr problem

hi,
love 6.5 then 7 but Pro is driving me potty... My system keeps crashing when rendering and also - or maybe becaused of?! - I keep getting 'can't playback audio / audio inputs are deactivated / adobe default sound drivers are in half duplex mode'. Are these problems linked? I've built up a large project - if I reinstall Pro will I lose it? I know I can't open it in 7.0 - pity! All help appreciated thankyou.
Ps ram is not a problem. I'm on vista.

Try this:
Support:kb402308 Realtek HD Audio
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Windows 7 Combo Jack Realtek driver problem s510p

I'm running Windows 7 on an Ideapad s510p, but the realtek drivers (downloaded from the s510p downloads page) sees one audio input, but thinks it is a headphone out only:
There were a couple of topics with kind of similar problems like this where people got recommended to use an adapter for both. I ordered one but that does not solve the problem, it seems to me that it is a driver problem. I tried the drivers from the s510p downloads page and also from the realtek drivers but both give the same problem, is there any way to fix this?

Okay, I solved the problem. Turns out I was installing the wrong driver from the Realtek website.
The correct driver for VB in my installation is for the AC'97 audio controller.
It is located at:
http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=23&PFid=23 &Level=4&Conn=3&DownTypeID=3&GetDown=false#AC
I have sound now!
For more information, you can view my postings at the VB forum:
http://forums.virtualbox.org/viewtopic.php?f=8&t=23224

Realtek Installation Problems

I just bought a P35 Neo2-fr motherboard. I am reallt disappointed by this board so far. Not only did I have the problems with the power on reboot, finding out it doesn't support VT, and now I am unable to get the Audio driver to work. I have read all the posts about this problem and none of the fixes have worked for me. In my system resources I do have the Microsoft UUA bus driver installed. But I am unable to install the realtek audio drivers. I start the install and then at the end it tells me it fails, with no explanation as to why. Is there a log somewhere? I have spent hours and I do not want to have to reinstall everything. Anyone have ideas on what to do?

Quote from: KevCar on 03-December-07, 05:23:36
Thanks for the lead but in searching for the suggestion I only returned 2 results in which neither talked about the solution. I used your name and the word audio in an advance search.
Hmm, sorry about that. I know I posted about this as I was having a similar issue. I had to use device manager, Add/Rem Progs and Safe mode too.
I tend to shy away from reg cleaners for devices especially if they still show under device manager.

Onboard Realtek audio problem

I just migrate from a K9N Diamond n590 to K9A2 Plat ver 1. Everything was installed succesfully except when I went into Device Manager there is a yellow ! mark under the "Other Devices" PCI.
I checked Vendor 1002 / Device 4383 which is GlobalTek or onboard HD audio.
I have uninstalled all the video/audio codecs from the previous board and installed Realtek HD audio package, ver 1.87.
In Bios I have enabled onboard audio. Rebooted and verified in Device Manager, there is no device, driver shown.
What could be the problem and how to solve it? Thanks.

If i understand clearly, you just migrated = putting the drive with OS? in the new system with K9A2 board, and booted up.
Have you installed in some way, the original drivers for this motherboard?
In casu, the SouthBridge drivers, because your previous motherboard was nvidia.
You moved from an nvidia-based mobo to an ATI-based mobo.
The id 1002:4383 is from the High Definition Audio device from ATI(Realtek).
driver:WinXP Driver Version: 5.10.0.5559_WHQL
Windows Vista Version: 6.0.1.5559

P965 Platinum and Realtek RTL8111B problem

I have a dual boot setup on my computer: Windows XP and Fedora 7 Linux.
After booting Windows XP I will have to COMPLETELY UNPLUG the power supply from my computer before booting to Fedora 7 Linux. The reason: If I simply reboot or turn off the computer (simply turning off does not remove the power from the mainboard), then the Realtek RTL8111B onboard LAN is left in a state which prevents Fedora 7 Linux from being able to use the LAN. Fedora simply reports the LAN is not available. The solution, which I find unacceptable, is to completely turn off the Realtek RTL8111B on the P965 Platinum and use an old Realtek 8129 PCI network board.
A better solution would be for the MSI BIOS to reset all of the Realtek RTL8111B LAN chipset's bits to a valid state so that Fedora 7 Linux would be able to properly recognize and use the onboard LAN.
Again, if I COMPLETELY UNPLUG my computer's power supply Fedora 7 Linux always finds and uses the onboard LAN. It is only after using Windows XP and rebooting to Fedora 7 Linux without completely unplugging the power supply first that there is a problem. This would seem to indicate the MSI BIOS is not resetting the Realtek RTL8111B onboard LAN chipset to a clean state when it initializes the system upon booting.
I am using MSI P965 Platinum BIOS version 1.4
John

Uhm, I'm having exactly the same issue under linux.
The router's led will stay off and it looks like there was no network cable connected (Realtek Ethernet controllers are insmod'ed and everything looks fine).
The only thing I haven't tried is unplugging the power supply's cable ... weird.
I'm also upset about this problem >:(
MSI P965 Platinum - BIOS v1.4

Realtek Microphone Problem

Hello,
For some reason I can't get my microphone to work in either front or back panel? It is weird. It all worked before I reinstalled my computer, and after I did it just stopped working. What could be the problem? When I say not working I mean, that the volume control for the mic is blacked out. It is recognised as being plugged in. I have latest software by the way.
Thanks

Used to be in my signature.. hmmm.
Intel Core 2 Duo || nVidia BFG 8600 GTS OC || 3 GB Corsair 667Mhz RAM || Sony DVD Drive || MSI 975X Platinum, Power UP Edition ||

Realtek audio driver or nforce udp 4.27 audio driver better?

hi i'm using msi k7n2 delta L which has realtek ac97 alc650 onboard audio and i wanna know which driver should i use?which driver will be fully compatible and better?
The realtek ac97 alc650 driver version A3.61? or the latest nvidia audio driver from udp 4.27 which says has improved AC ’97 / Soft Audio driver and has added support for Realtek ALC655 codecs, Realtek ALC658 codecs, and 7.1 support for Realtek ALC850 codecs?

Just reading through quick fast, I couldn't help notice the fact that someone mentioned that the ILSR boards uses this soundstorm thing.....Well, hey, I got a ILSR....I'm currently using the 4.24 chipset...Are there different drivers for the soundstorm audio? Or should I download the newest 4.27's? Thanks....Sorry to sidetrack your post gerty....Silly

SoundBlaster X-FI MB3 software problem

Hello MSI Forums,
New purchaser of the Z87-GD65 motherboard. Has anyone else purchased this board and installed the XFI MB3 software from the included driver CD? I installed the software and it states that "There is no supported audio device available". For anyone that says I do not have a SB card installed, my understanding is that this is not a driver, but software to enhance basic onboard audio on a motherboard.
Quote from Creative: The Sound Blaster X-Fi MB3 software suite is a powerful audio platform equipped with cutting-edge audio technology, offering premium audio quality, effects and features for ordinary PC systems equipped with only basic onboard audio.
No where does the Creative site say it is a external soundcard required software. It is part of the software package included with the MB, and is for sale by Creative. I would expect that this software is included with the MPower boards as well.
I cannot get 5.1 audio from the optical S/PDIF Out, and figured this software might be the fix. I only get 2.1 audio. I have an older Gig board with optical out, and the Realtek drivers that i used for that board had theater 5.1 options. The MSI Realtek driver under the digital output only gives you the option for CD or DVD with no speaker options, like the Speaker setting does.
I have run through all of the sound settings in Device Manager and can only select 2 channel audio on the Advanced tab for Realtek Digital Output. Not understanding if it is a MSI Realtek interface problem, or the drivers. Tempted to install the old R257 or R267 drivers. Currently running R271. The old drivers allowed me to install the Dolby HD drivers from Realtek (DCC Win764 2.2.3 Dolby). If i try to install the Dolby HD drivers for this board I get an error.
Sent an email to MSI Tech Support:
Dear Customer, the board does not have a sound blaster audio controller; it has a Realtek audio controller. It does come with the sound blaster Cinema an audio effect program. the board will do 5.1 from the analog audio jacks only. You can get 5.1 from the audio optical output for video playback if you use a program like power DVD and the audio track is originally recorded in 5.1.
I am using MPC-HC X64 software to watch movies on a Blu-Ray projector and have always had 5.1 audio using the optical out. So this software supports it, not sure why Tech Support thinks that the software will make the difference, when I cant even select 5.1 under the Digital Audio device output in Device Manager. The included Cinema software only appears to alter the OFC audio jacks. I am wondering if the problem is the Realtek driver for the ALC1150, or MSI's version of it. Nothing has changed from my previous MB setup other than the board and the drivers.
Running Windows 7 X64 as I was on the other MB.
Any suggestions, or anyone using the software successfully?

Quote from: dmsanjaya on 04-August-13, 04:49:38
sorry froggy that's what i said. i had the problem. cinema sounbd one is another problem. X-FI MB 3 is intended for Xpower board only as far as i know. check your self, check the overview of both boards and you will see only in xpower it says about the x-fi mb 3, so i guess the CD has the software of all the Z87 mobos, i think it's not specific as the rest of the devices are mostly common as well.
GD65
http://www.msi.com/product/mb/Z87-GD65-GAMING.html#overview
Xpower
http://game.msi.com/product/motherboard/z87-xpower
P.S. My cinema sound problem is a seperate problem. m facing many problems with this mobo. i can't even install widi drivers
Already did read it at the MSI Website several replies earlier.

Audio problems with K8N Platnium (ms-7030)

Hello,
I have recently installed the newest Realtek ALC850 driver and digicell and I have sound on my headphones. What I want to do is have sound on my surround sound reciever. I am hooking them up with a optical toslink cable. My reciever only accepts a digital output of 48Khz and I belive the onbourd audio output is 96Khz. I know with my older audigy platnuim card that i sold you could change between the frequencies. I cannot find a setting to change this for the onboard sound.
Is there a way of changing the optical output frequency from 96khz to 48 khz?
Thanks in advance.....

ALC850 AC'97 Rev 2.3 Audio CODEC
General Description
Featuring four 16-bit two-channel DACs and a stereo 16-bit ADC, the ALC850 is an AC'97 Rev 2.3 compatible multi-channel audio CODEC designed for PC multimedia systems. The ALC850 incorporates proprietary converter technology and fully meets performance requirements for PC99/2001 systems.
Four pairs of stereo outputs, with 5-bit volume control and multiple stereo and mono inputs, along with flexible mixing, and gain and mute functions, provide a complete integrated audio solution for PCs. The digital interface circuitry of the ALC850 operates from a low-power consumption 3.3V power supply.
Two integrated 50mW/20ohm headphone audio amplifiers provide high-quality personal audio listening. Utilizing Universal Audio Jack® technology, Line-In and Mic-In can also serve as Headphone-Out with an amplifier advantage.
The ALC850 integrates an on-board dual PLL clock generator (14.318MHz and 24.576MHz), saving the cost of a 24.576MHz crystal. A PCBEEP generator is built-in and can be programmed by the BIOS to generate POST beeps without a buzzer. S/PDIF input and output functions are also supported, offering easy connection of PCs to consumer electronic products such as AC3 decoders/speakers, and mini disk devices.
The ALC850 supports host/soft audio from Intel ICHx chipsets, as well as audio controller-based VIA/SiS/ALi/AMD/nVIDIA/ATI chipsets. Bundled Windows series (98/ME/NT/2000/XP) and Linux drivers, EAX/Direct Sound 3D/I3DL2/A3D compatible sound effect utilities (supporting Karaoke, 26 types of environment sound emulation, 10-band equalizer), HRTF 3D positional audio, and Sensaura™ 3D (optional), providing an excellent entertainment package and game experience for PC users. In addition, the ALC850 is embedded with an impedance sensing capability to detect when a device has been connected to input or output jacks.
Features
Meets performance requirements for audio on PC99/2001 systems
Meets Microsoft WHQL/WLP 2.0 audio requirements
Eight-channel DA converter (48KHz)
Stereo AD converter (48KHz)
Complies with AC'97 Rev 2.3 specifications:
Jack sensing on Front-Out, Surround-Out, Cen/LFE-Out, Surround-Back-Out, Mic-In, Line-In, and Front-Mic-In
Clock input support options:
14.318MHz PLL (may be set to 24.576MHz) to eliminate crystal
12.288MHz BITCLK input
Integrated PCBEEP generator
Interrupt capability
Page and analog Plug & Play registers
Three analog line-level stereo inputs with 5-bit volume control: Line-In, CD, Aux
High-quality differential CD input
Two analog line-level mono inputs: PCBEEP, Phone-In
A dedicated stereo Front-Mic input for front panel applications
Line-In, Aux, and Mic-In can be shared with Surround-Out, Surround-Back-Out, and Cen/LFE-Out. (FlexJack®)
+20dB boost preamplifier for Mic input
Both Front-Out and Surround-Out integrate 50mW/20ohm amplifiers
External Amplifier Power Down (EAPD)
Power management and enhanced power saving features
Stereo Mic record for AEC/BF application
Supports Power-Off CD operation
Adjustable VREFOUT control
**** Supports 48KHz S/PDIF output ****
Supports 32K/44.1K/48KHz S/PDIF input
Three Universal Audio Jacks (UAJ®): Front-Out, Line-In, and Mic-In
Six Jack Detect pins for automatic jack sensing
Power support: Digital: 3.3V; Analog: 3.3V/5V
Standard 48-pin LQFP package
EAX™ 1.0 & 2.0 compatible
Direct Sound 3D™ compatible
A3D™ compatible
I3DL2 compatible
HRTF 3D positional audio
Sensaura™ 3D Enhancement (optional)
10-band Software Equalizer
Voice cancellation and key shifting in Karaoke mode
AVRack® Media Player
Configuration Panel for enhanced user experience

Loss of Sound

hey everybody,
My desktop has lost all sound output. today I was trying to fix this, reconfiguring alsa, uninstalling and reinstalling it and setting everything up again. still no sound.
shutdown the comp, made sure the cables still hooked up on the inside (I had just put in a new fanless heatsink on my vid card last week). everything is fine.
I booted up with a live cd, first tried fedora13...only to have fedora barf and not load the live environment.
then booted from crunchbang 10a2, which worked fine. still no sound here, either.
could this be caused by anything else, or is my on-board sound just dead?
is there anything else to troubleshoot?
here's what I've got :
[b]$ ls -l /sys/module/snd/holders[/b]
total 0
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_ac97_codec -> ../../snd_ac97_codec/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 [b]snd_intel8x0 -> ../../snd_intel8x0/[/b]
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mixer_oss -> ../../snd_mixer_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mpu401 -> ../../snd_mpu401/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_mpu401_uart -> ../../snd_mpu401_uart/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_pcm -> ../../snd_pcm/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_pcm_oss -> ../../snd_pcm_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_rawmidi -> ../../snd_rawmidi/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq -> ../../snd_seq/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq_device -> ../../snd_seq_device/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_seq_oss -> ../../snd_seq_oss/
lrwxrwxrwx 1 root root 0 Jul 9 21:54 snd_timer -> ../../snd_timer/
this one i'm not sure about. should it be at the top?
[b]$ lsmod|grep '^snd' | column -t[/b]
snd_seq_dummy 1447 0
snd_seq_oss 28928 0
snd_seq_midi_event 5420 1 snd_seq_oss
snd_seq 50530 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_mpu401 5376 0
snd_mpu401_uart 5931 1 snd_mpu401
snd_rawmidi 19235 1 snd_mpu401_uart
snd_pcm_oss 39096 0
snd_seq_device 5241 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd_mixer_oss 16932 1 snd_pcm_oss
[b]snd_intel8x0 26839[/b] 0
snd_ac97_codec 110525 [b]1 snd_intel8x0[/b]
snd_pcm 71653 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 19660 2 snd_seq,snd_pcm
snd 57225 12 snd_seq_oss,snd_seq,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_pcm_oss,snd_seq_device,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 7201 2 snd_intel8x0,snd_pcm
[b]$ ls -l /dev/snd[/b]
total 0
crw-rw----+ 1 root audio 116, 4 Jul 9 20:14 controlC1
crw-rw----+ 1 root audio 116, 3 Jul 9 20:14 midiC1D0
crw-rw----+ 1 root audio 116, 5 Jul 9 20:14 seq
crw-rw----+ 1 root audio 116, 2 Jul 9 20:14 timer
[b]$ lspci[/b]
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV41.1 [GeForce 6800] (rev a2)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
THis is also weird...sometimes this will work, and sometimes it won't. when I say sometimes I mean as I've been fidling around with settings. but even when it worked a while ago I still had no sound.
[b]$ alsamixer[/b]
cannot open mixer: No such file or directory
Right now, alsamixer opens normally. (after a reboot)
/etc/rc.conf excerpt:
MODULES=(!usblp !acpi-cpufreq !snd_intel8x0m vboxdrv vboxnetflt !snd-pcsp snd_i$
/etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options snd-intel8x0 ac97_quirk=1
#NVidia CK804 Chip: Realtek ALC850 rev 0
options snd-pcsp index=2
thanks!

windscape wrote:
Hi jamba,
I think the issue is that your output of lspci shows no Audio device. Perhaps it got disabled in the BIOS? dmesg output may indicate something else afoot with your audio hardware.
Hope that helps.
I'll check out dmesg output. also still need to check if something got disabled in the BIOS.
!snd_intel8x0m <- is your problem. Your sound module got blacklisted so un-list it. Modprobe it then try sound again or just reboot and it should work.
moonswan. snd_intel8x0 is the sound card (I think), in the alsa wiki it said it was recommended to blacklist snd_intel8x0m as a quirk fix.
No sound with or without it blacklisted still :-(
thanks

5.1 sound on the K8N Neo4 *Solved*

Hi!
I just bought a pair of Cosonic 5.1 Headphones, and tried to install them. Problem was, the amplifier for them wants/demands "front", "rear" and "subwoofer/center"-audio inputs. In the manual for my MB it says: "However, there is an advance audio application provided by Realtek ALC850 to offer support for 7.1-channel audio operation and can turn rear audio connection from 2-channel to 4/5.1/7.1 channel audio.".
Needless to say, I havent been able to find it.
And a quick follow-up clarification, if I connect the headphones to the regular "line out" it wont be 5.1, right?
The outputs I get from the onboard soundcard are:
"Line In (in 7.1CH/6CH)",
"Line Out",
"MIC",
"Rear Speaker Out (in 7.1CH/6CH/4CH)",
"Center/Subwoofer Speaker Out (in 7.1CH/6CH)",
"S/PDIF Out-Optical (in 7.1CH/6CH)"
and a "S/PDIF Out-Coaxial".
Any suggestions/work-arounds?
thanks in advance
MsP

Thanks alot guys, guick response!
I found the MSI Sound Utility-thingie, and was able to set it to 6CH, so the Headphones work great now!
The name of the headphones are "5.1 CH Digital Surroundig headhpone" according to the manual , but I belive they go by the name "HTS-810MVI" (http://www.headphone.com.cn/sort1.asp?sort_id=108) in case you still wanna know.
Once again thanks for the quick help!
MsP

Intergrated Audio not working

K8N Neo2 Platinum
I have just reinstalled windows and added a few pieces of hardware to my computer (old tv tuner, creative sb5.1 platinum, and another dvd drive)
after finally fixing my wireless problems i have discovered that the sound doesn't work which did previously. the drivers install and windows detects it fine but no sound come out, i though there might be some sort of conflict etc so i removed the creative sound card and the tv tuner and then reinstalled windows xp but i still have the same problem.
is there someway to fix this or should i just send it in to msi and get a replacement.
if so can someone point me in the right direction on how to do this, i live in australia, but i brought the mobo when i was in denmark along with most other parts of my computer. Can i just sent my mobo to msi in australia or do i have to do it via the shop i brought it from in denmark
cheers
Andrew

Check your sound levels (easy mistake to make)
Uninstall any soundblaster drivers that have been left over if they still exist.
Two paths here , you can install the newest realtek ALC850 drivers, or install the new nvidia ones (which are alot better but harder to install)
if you want to install the WHQL Nforce drivers? Download here.
http://www.nvidia.com/object/nforce_udp_winxp_5.10
or beta ones
http://whitebunny.demon.nl/download?file=mbd_nvidia_nforce_6.16beta_w2k-wxp.zip
(download new sound drivers and install them after the beta nforce drivers http://www.nvidia.com/object/nforce_audio_4.57_win2kxp)
if you have installed the realtek drivers, uninstall them before going the Nforce route.
full install instructions for the newer nforce ones are on this thread
New Nforce audio drivers?
Quote
Originally posted by Fush
K8N Neo2 Platinum
I have just reinstalled windows and added a few pieces of hardware to my computer (old tv tuner, creative sb5.1 platinum, and another dvd drive)
after finally fixing my wireless problems i have discovered that the sound doesn't work which did previously. the drivers install and windows detects it fine but no sound come out, i though there might be some sort of conflict etc so i removed the creative sound card and the tv tuner and then reinstalled windows xp but i still have the same problem.
is there someway to fix this or should i just send it in to msi and get a replacement.
if so can someone point me in the right direction on how to do this, i live in australia, but i brought the mobo when i was in denmark along with most other parts of my computer. Can i just sent my mobo to msi in australia or do i have to do it via the shop i brought it from in denmark
cheers
Andrew

Realtek alc850 problem

Similar Messages

Maybe you are looking for