Realtek hd audio driver doesnt get update, how to get this done?

i m not able to update my realtek hd audio driver,cybelink power2go and cyberlink photodirector. Kindly help.

Hi,
To help us answer question quicker, please read this:
   http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

    Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
    This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
    But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
    By the way I got an Satellite M70 - 168 laptop.

    Hi
    Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
    Found this useful knowledge base article:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
    This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
    But dont worry buddy. The Google search engine is the key!
    Try to search for this KB835221 patch and Im sure you will find the right one!
    The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
    PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
    Good luck!
    Message was edited by: Jayjay

  • Cannot install Realtek HD Audio driver! HELP!

    Hi Everyone,
    I'm running into a big problem with my Realtek HD Audio setup. After windows installation, it's got the typical Legacy codecs etc and "Audio Device on High Definition Audio Bus" with a yellow exclamation mark. None of them has any drivers associated with it. Funny thing is, I cannot uninstall any one of them. All the Leagcy stuff has no uninstall option, the High Definition Audio Bus does have an uninstall option, but it does absolutely nothing. Install new driver, it won't allow that either. Clicking on them does nothing.
    I got the latest setup driver from Realtek and tried to run it, it gives me the "Install Realtek HD Audio Driver Failure" everytime. And I have already installed the UAA. (KB888111)
    Finally I found a way to uninstall all of the Legacy codecs etc except the Auido Device on HD thing. Restarted the computer hoping windows will try to reinstall, nope, cannot find anything. So now I'm left with only the Audio Device on HD Audio Bus.
    When I disable the HD Audio from the BIOS, it leaves me with no Sound, Video, and Game Controllers. So it only shows up when I enable it in the BIOS, and yet I cannot install a new driver or uninstall it, though I can "disable" it . I can also get into Properties and there is no drivers. Please help!
    MSI P35 Neo2-FR BIOS 1.6
    C2Q Q6600
    2x320 Maxtor in Raid 0
    eVGA GeForce 8600GTS 512MB
    Corsair XMS2 with DHS 2x1GB
    Windows XP w/SP2
    Hope I'm not missing any info. Thanks!
    Frank

    just thought i would add my experience to this thread on th eoff chance that it saves someone the headache i've just been through. Admittedly though it was my own lack of thinking (aka 'beer') that was the problem in the end.
    So...
    I decided to do  fresh install of XP +SP3
    All went smoothly except i could not get HD sound. Looking on google and this forum it seemed there was some problem with SP3 and the realtek HD drivers, so i spent ages playing around install and uninstalling the audio drivers in different orders to try and get the damn sound to come out through my HD TV. Normal sound through the stereo jack was working, just not the sound through the HDMI cable into my TV. (YOu might have already guessed now what silly mistake i was making). I also found an audio device in Device manager that i could not find any drivers for.
    Anyway, the answer was that the device i needed was the nought to do with my MSI motherboard, but the audio output that goes through the HDMI cable on my gfx card. I can't believe i spent so long trying to get HD sound and all i needed to do was update the mysterious audio device with ATI drivers (which windows could do automatically once i'd installed the ATI gfx drivers). Serves me right for trying to do a fresh install after a belly full of beer. idiot.
    All working fine now.

  • Realtek HD Audio driver and Audio Manager for IdeaCentre K320

    Hi,
    i've tried to install the original Realtek HD Audio driver and Realtek HD Audio manager because i want to assign the input connectors of the onboard soundcard Realtek ALC888 on my own.
    Everytime when i try to install the Realtek HD Audio Driver R2.55 including the Realtek Audio Manager my computer is installing the Lenovo Audio Manager again and again but within the Lenovo Audio Manager i cannot make the assignments.
    Is there any way to get the Realtek Audio Manager running or is it not possible the install the manufactures software and drivers ?
    Thank you.
    Kind regards,
    Michael

    Hi:
    I bet you were unpleasantly surprised by that! 
    The fix is simple:
    Go into your system setup (BIOS) using the F10 key.
    Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
    Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
    Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
    What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
    Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
    Paul

  • HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    I have os x 10.6.8. When I try to update it says there are no updates for my system.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    Welcome to the Apple Community.
    You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

  • Realtek HD Audio Driver Not Completing install - error message

    Could I just say first that I am far from being technical minded so please allow for possible lapses in info.
    Just done another complete reinstall of Win XP - formatted drive etc.
    However unlike on previous instances the Realtek HD Audio driver has not installed.
    I have downloaded the latest version - 5.10.0.5605 but this too at  very near the end of installation gives the message Install Realtek HD Audio Driver Failure [Error Code 0xE0000227]
    I have the G33M Series MS-7357(v1.X) Mainboard with Intel Core 2 Duo
    Hope this is enough info to anyone to offer advice.
    Thanks
    John

    https://forum-en.msi.com/index.php?topic=115476.0

  • Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

    My Realtek HD Audio driver disappears (from both the Vista "Sound Manager" and the "Device Manager") and is replaced by an ATI HD Audio driver after installing an ATI  Radeon 5450 graphics card.  I've tried un-installing the ATI Audio driver and re-installing the Realtek Audio driver.  But, upon rebooting, Vista automatically re-installs the ATI Audio driver (and the Realtek Audio driver, which I just re-installed, is no where to be found after rebooting).  I'm using an HP a6110n desktop running Windows Vista.  
    This question was solved.
    View Solution.

    Hi:
    I bet you were unpleasantly surprised by that! 
    The fix is simple:
    Go into your system setup (BIOS) using the F10 key.
    Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
    Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
    Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
    What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
    Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
    Paul

  • Hi i use a macpro i7 wt 7200rpm internal drive i get this message Disk is too slow-(prepare) (-10001) when i am using logic 9

    Hi i use a macbook pro 17" 2.66ghz intel core i7 with 8gb ram & a 500gb@7200rpm internal drive i get this message "Disk is too slow. (Prepare)  (-10001) when i am using logic 9 wiyh just a 5 vsts loaded 2 of them being esx24's . i used to not get this warning earlier in the same or even heavily loaded projects.
    When i press play the beachball appears for a minute or so then the message.
    Even when i open up a new project a beachball appears for about 30-40 secs and then the project opens up
    i have even tried opening up the projects w/o any vst's loaded (i have disabled them from audio units manager)
    Initially i thought it was a hard drive problem so apple had it replaced for me but i am still encountering the same problem.
    have even tried disabling the sudden motion sensor from terminal no luck there too
    tried reloading osx 10.6.7 no luck there too
    what do i do
    aggi

    How full is your 500 GB hard disk?
    Do you have 10% to 15% free space available?

  • I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week.

    I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • I was advised by Adobe tech on Chat that my Serial Number is for a MAC and I have a PC...but he didn't offer to change my platform...how can I get this done?

    Case Number:0214213994
    I was advised that my serial number for CS6 Master Collection was for MAC...I have a PC.   The agent didn't offer to change platform for me which I was since advised by the college that this is what he should have done.
    How can I get this done as I am rarely able to access the 24 hr chat option.

    Thanks for your help Jeff...actually it turned out that Chrome was the issue and even FIrefox didn't work ....it was slow clunky old IE that eventually got me the chat option and I finally got my issue resolved.....I was getting pretty desperate and am now VERY happy to have my Master Collection back.
    Sorry I don't know enough about plugins to help you there but all other functions that I need to do with Chrome work as a rule so I cannot help as far as Adobe is concerned.  I know that Chrome often has shock wave errors due to incompatibility with the player on my device but otherwise I'm clueless.

  • I need to reinstall photoshop but I can not find the original disk   how do I get this done?

    i need to reinstall photoshop but I can not find the original disk.   how do I get this done?

    Download CS6 products
    Mylenium

  • HT201250 My time machine back up does not appear to back up documents and e mails (the most important things for me). How do I get this done?

    My time machine back up does not appear to back up documents and e mails (the most important things for me). How do I get this done?

    How do you know it's not backing up those things? To check documents, go in the Finder to your documents folder, then go to the Time Machine icon in your menubar and click Enter Time Machine. Scroll back through time and see if previous versions of the documents exist in the backups.
    For Mail, same thing. Open the Mail app, go into Time Machine in the same way, and scroll back. Your inbox should change to reflect how it looked when it was backed up.
    Matt

  • Ipod touch 4 freezes in middle of video and turns it black but audio still continues to play, how to fix this and what possibly caused it?

    Help out? i was watching a 43 min episode and it works fine in the first like 20 minutes but later on in freezes, it turns the screen completely black afterwards, there's still sound, but theres no video, the screen is completely black while audio continues to play. How to fix this? and what were the possible causes for this?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Delete/unsunc he video and then resync/redownload
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help!  Chris.

    I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help!  Chris.

    It would be helpful to know what version of Acrobat, WORD, and operating system.
    Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
    You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

Maybe you are looking for

  • Can anybody help me resolve this Windows 8.1 Issue?

    In summary, a couple of hours ago whilst surfing the internet, a message popped up on my screen and without doing anything told me that my computer was "installing Windows 8.1", and no matter what I did it wouldn't let me exit, and not being all that

  • Receiveing data over RTP doesn't work

    First of all , excuse my english.....it really sucks Second of all , this is my problem: I modified the JMStudio source to suit my needs.....leaving just what i needed.The application works......it sends data just fine but it does't receives it.I tri

  • Can we mirror an iPad 2 to a iPhone 4s

    Was wondering if we can mirror an iPad 2 to a iPhone 4s?

  • Nokia N8 Screen Saver & Power-Saving Mode

    Few issues after 24hrs of N8 usage... 1) My Screen Saver stopped working... screen stays lit indefinitely, even when locked... after multiple restarts and lots of frustration it came back, but this issue has already happened twice - surely a bug 2) P

  • L_TO_CREATE_MULTIPLE, --- Fix Bin Problem

    Hi, I've used fix bin strategy in warehouse management,  and I set a fix bin B01 for the material 100-100, If I create a transfer order for this material via Tcode LT01 and assign a destination storage bin B02 to it, a <b>WARNING</b> message appeared