Realtek HD Audio Driver Not Completing install - error message

Could I just say first that I am far from being technical minded so please allow for possible lapses in info.
Just done another complete reinstall of Win XP - formatted drive etc.
However unlike on previous instances the Realtek HD Audio driver has not installed.
I have downloaded the latest version - 5.10.0.5605 but this too at very near the end of installation gives the message Install Realtek HD Audio Driver Failure [Error Code 0xE0000227]
I have the G33M Series MS-7357(v1.X) Mainboard with Intel Core 2 Duo
Hope this is enough info to anyone to offer advice.
Thanks
John

https://forum-en.msi.com/index.php?topic=115476.0

Similar Messages

Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

My Realtek HD Audio driver disappears (from both the Vista "Sound Manager" and the "Device Manager") and is replaced by an ATI HD Audio driver after installing an ATI Radeon 5450 graphics card. I've tried un-installing the ATI Audio driver and re-installing the Realtek Audio driver. But, upon rebooting, Vista automatically re-installs the ATI Audio driver (and the Realtek Audio driver, which I just re-installed, is no where to be found after rebooting). I'm using an HP a6110n desktop running Windows Vista.
This question was solved.
View Solution.

Hi:
I bet you were unpleasantly surprised by that!
The fix is simple:
Go into your system setup (BIOS) using the F10 key.
Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
Paul

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

ITunes was not properly installed error message

Dear All,
A friend of mine is getting the following error when opening iTunes.
"Warning; iTunes was not properly installed if you wish to import or burn CDs. you need to reinstall iTunes"
I have tried;
1. Uninstalling & reinstalling iTunes + Quicktime
2. Downloading and installing the GEAR drivers
3. Following these posts;
http://support.apple.com/kb/HT2615
http://support.apple.com/kb/TS3299
http://discussions.apple.com/message.jspa?messageID=8081513#8081513
Here is the diagnostic information; please can someone point me in the right direction.
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 530s
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver not found.
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number 96A00247D77D2D86
Current user is not an administrator.
The current local date and time is 2010-11-07 16:52:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Intel Corporation, Intel(R) G33/G31 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 493b5db9d323eca0f4697f064a8bc3c3
iPodService 10.0.1.22 is currently running.
iTunesHelper 10.0.1.22 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM
Failed while scanning for CD/DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Thanks

I don't think this one is a variation of the device filter troubles, Littlebirt.
Checking something from the diagnostics:
+Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.+
Is there any virtual drive software (like, say, Daemon Tools or Alcohol 120%) installed on the PC?

No Audio Output Device is installed error message

I have a hp pavilion m6- 1045dx and when I turned it on I noticed there was no sound and the speaker icon next to the clock in the bottom right corner had a red "x" next to it. I tried pressing the mute button, up volume, and down volume buttons and that didn't work. I've tried power cycles, uninstalling and re-installing and even downloading new drivers, checking for software changes, and checking to see if software and things pertaining to this problem were up to date (windows said yes). My frustration level is through the roof and I'm ready to get rid of this laptop. Can someone please help?

Hi ALima,
With the error message of No Audio Output Device is Installed. I have included the document 'Error in Windows 7: No Audio Output Device is installed'. Please follow through the troubleshooting steps in order for the best results.
If the above document fails to resolve the issue, I have also included 'Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices'.
Please let me know if you are still getting the same error message after troubleshooting, thank you.
I worked on behalf of HP

OT: Thunderbolt drive not ejected properly error message

Hello all: I've got a MBPro 17 and a less than a month old LaCie 2T Rugged Thunderbolt/USB3.0 drive that I've started using. The drive randomly ejects itself and of course at the worst times. It could either be in use or nothing going and it just ejects.
I've replaced the drive once at the Apple Store, but I think it's the OSX or ??? Any ideas?
Thanks,
Tolbert

this may be an issue with my USB hub...its USB 3.0 with two "extra" powered all the time....one HD is just a normal non powred travel drive (seagate) and had a FIT with the powered port just now. I have moved ALL external drives to the "normal" spots on the hub and see if its just the hub acting up

Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
By the way I got an Satellite M70 - 168 laptop.

Hi
Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
Found this useful knowledge base article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
But dont worry buddy. The Google search engine is the key!
Try to search for this KB835221 patch and Im sure you will find the right one!
The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
Good luck!
Message was edited by: Jayjay

Cannot install Realtek HD Audio driver! HELP!

Hi Everyone,
I'm running into a big problem with my Realtek HD Audio setup. After windows installation, it's got the typical Legacy codecs etc and "Audio Device on High Definition Audio Bus" with a yellow exclamation mark. None of them has any drivers associated with it. Funny thing is, I cannot uninstall any one of them. All the Leagcy stuff has no uninstall option, the High Definition Audio Bus does have an uninstall option, but it does absolutely nothing. Install new driver, it won't allow that either. Clicking on them does nothing.
I got the latest setup driver from Realtek and tried to run it, it gives me the "Install Realtek HD Audio Driver Failure" everytime. And I have already installed the UAA. (KB888111)
Finally I found a way to uninstall all of the Legacy codecs etc except the Auido Device on HD thing. Restarted the computer hoping windows will try to reinstall, nope, cannot find anything. So now I'm left with only the Audio Device on HD Audio Bus.
When I disable the HD Audio from the BIOS, it leaves me with no Sound, Video, and Game Controllers. So it only shows up when I enable it in the BIOS, and yet I cannot install a new driver or uninstall it, though I can "disable" it . I can also get into Properties and there is no drivers. Please help!
MSI P35 Neo2-FR BIOS 1.6
C2Q Q6600
2x320 Maxtor in Raid 0
eVGA GeForce 8600GTS 512MB
Corsair XMS2 with DHS 2x1GB
Windows XP w/SP2
Hope I'm not missing any info. Thanks!
Frank

just thought i would add my experience to this thread on th eoff chance that it saves someone the headache i've just been through. Admittedly though it was my own lack of thinking (aka 'beer') that was the problem in the end.
So...
I decided to do fresh install of XP +SP3
All went smoothly except i could not get HD sound. Looking on google and this forum it seemed there was some problem with SP3 and the realtek HD drivers, so i spent ages playing around install and uninstalling the audio drivers in different orders to try and get the damn sound to come out through my HD TV. Normal sound through the stereo jack was working, just not the sound through the HDMI cable into my TV. (YOu might have already guessed now what silly mistake i was making). I also found an audio device in Device manager that i could not find any drivers for.
Anyway, the answer was that the device i needed was the nought to do with my MSI motherboard, but the audio output that goes through the HDMI cable on my gfx card. I can't believe i spent so long trying to get HD sound and all i needed to do was update the mysterious audio device with ATI drivers (which windows could do automatically once i'd installed the ATI gfx drivers). Serves me right for trying to do a fresh install after a belly full of beer. idiot.
All working fine now.

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Realtek HD Audio driver and Audio Manager for IdeaCentre K320

Hi,
i've tried to install the original Realtek HD Audio driver and Realtek HD Audio manager because i want to assign the input connectors of the onboard soundcard Realtek ALC888 on my own.
Everytime when i try to install the Realtek HD Audio Driver R2.55 including the Realtek Audio Manager my computer is installing the Lenovo Audio Manager again and again but within the Lenovo Audio Manager i cannot make the assignments.
Is there any way to get the Realtek Audio Manager running or is it not possible the install the manufactures software and drivers ?
Thank you.
Kind regards,
Michael

Hi:
I bet you were unpleasantly surprised by that!
The fix is simple:
Go into your system setup (BIOS) using the F10 key.
Find your device configuration menu. In that menu there should be a setting for your onboard audio. It is probably set to Auto.
Change the setting to Enabled. Hit the F10, key there and again when you save your settings and exit.
Now your onboard audio will be back and your HDMI out audio on your graphics card should work too when you need it.
What happened was when you installed the Video card with HDMI out, there is an audio chip on the video card for HDMI. The PC sensing a new sound card, just disabled the onboard sound card because it thought you didn't want to use the onboard card anymore.
Changing the BIOS setting to enabled tells the PC to use the onboard audio card as well as any others you may have installed.
Paul

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Audio driver not working in hp 2000 - 2116tu laptop

Audio driver not working in hp 2000 - 2116tu laptop
Driver installed : sp57716.exe
From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
OS : Windows 7 Pro x64
Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

Hi architsomani,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

IPhoto will not open. Error message says I must upgrade. But APP store says it is already installed?

iPhoto will not open. Error message says I must upgrade but the AppStore indicates that the newest version of iPhoto is installed so how can I upgrade and why did it stop working in the first place? What is the problem?

Hi Terence. I solved my problem. Apparently a 9.5.1 version of iPhoto was dowloaded, backed up on Ext Drive then deleted from the Mac HD...Leaving the old version 9.4.3 still resident on the Mac HD.
Thanks for responding.

WEIRD "Time Machine could not complete Backup" error

So this started back in Leopard 10.5.
I used Time machine once and didn't like it so I turned it off and unhooked the external drive.
Ever since that time, I get a Time Machine could not complete Backup error window that pops up every 2 hours or so it seems.
I updated to Snow Leopard and still got this problem all the way up to 10.6.8.
I have now updated to Lion and I STILL get this stupid annoying error.
My TM is OFF and there are no drives selected anywhere.
What should I do ?

Very true, I didn't even tink about that... but.....
I did have TimeMachineEditor but it was already set to OFF.
I also had another program (Time Machine Scheduler) that was also set to off.
****, I would have loved it to be that !!!

Cannot download Fallensword Helper Scripts. Getting "Script could not be installed Error: Failed to @require json2.js"

Hello, I did a drive eraser and reinstalled everything(to clean up computer), then when I got to reinstalling firefox I had a problem. I play a game called Fallensword. It has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install scripts it said "Script could not be installed Error: Failed to @require json2.js". I have done this to my computer every year since I started using computers. I have never had this before. Please help me get a fix for this, for I google it and cannot find a answer.

This was a indeed a problem in Greasemonkey 0.9.0. It has been resolved in Greasemonkey 0.9.1, as can bee seen at [https://github.com/greasemonkey/greasemonkey/issues/closed#issue/1262 their site]:

Realtek HD Audio Driver Not Completing install - error message

Similar Messages

Maybe you are looking for