REALTEK HD AUDIO MIC PROBLEM !!!

1.Product Type: K9NGM-L
2.BIOS version: AMI-8000618
3.External VGA Type: ATI X550
4.CPU Type: AMD 940 PIN 3500+
5.Memory Type: 1GB DDR2
6.Power Supply Type: 400W
7.Operating System: WIN XP PRO
8.Problem Description:
MIC. SETTING IS INACTIVE
REALTEK HD AUDIO SETUP IS OK.
OUTPUT WORKS BUT MIC AND LINE IN IS INACTIVE.
I DON'T USE FRONT PANEL SOKETS.
I HAVE ORGINAL CD SETUP OF MSI MAINBOARD.
PLEASE HELP... THANK YOU...

Open control panel and then open sound effects manager.Go to speaker config tab and set according to what you need.If your problem is not there check the mobo manual for front panel jumper settings.If the front panel jumpers are set the rear connectors won't work.
These audio devices can be configured so that you can either have 2 speakers and the mic and line in or for 7.1 surround sound.Hope this helps.

Similar Messages

Realtek hd audio mic

In my realtek audio manager, it shows that my mic goes on 'mute' automatically when i press 'call' in skype. either a echo/sound test or calling a contact.
WHY

I think this is a new bug with the latest version of Skype - never experienced it earlier. In fact it was quite funny. Expecting an important international skype call, I did a skype test call. Everything went fine. But when my actual call came through - the microphone stopped functioning. It took me a couple of hours to figure out that Skype is playing tricks with Realtek configuration. The 'Mic Volume' under 'Playback' on the Mixer page of the Realtek HD Audio Manager had got muted on its own.
I unmuted it and did a test call again on Skype. This time I heard only half of what I recorded during the test! I opened the audio manager - yes the 'Mic Volume' had again got muted! I did a third test, this time I made the skype test callwhile keeping the audio manager visible on screen. This time I saw the 'Mic Volume' getting muted on its own while I was recording for the Skype test call.
I hope the Skype team will look into this problem.
Abhijit

Audio mic problem

Hi guys, I've had my 925 for about a month and love it. Recently tho I shot some video and on playback there was a problem with the sound is it was just static noise, no distinguishable sounds. This happens when I try to record audio as well. Is this likely a hardware malfunction? Has anyone else experienced this?
Any help would be appreciated.

Hi,
sounds like the secondary microphone in your phone is broken. It's placed on top of the phone, there's a small hole next to Audio connector. Hope you havent tried to push any needle there?
Anyway, you should visit Nokia Care to get the secondary mic replaced.
I'm working at Nokia, but all my posts represent my own views and these should not be mixed up with Official NOKIA statements.

Audio, Mic problem on xperia z1 compact

Hi, Can't use my xperia z1 compact as a phone. The person I try to talk to can't hear me properly-I sound stuttering. Sometimes I also hear the line echoes. But it seems I mostly can hear the other part quite clear, but they can't hear me. I have gotten a new SIM card, phoned my phonecompany twice-they don't find anything wrong with the line. Have the latest update.What to do?

Hey,
I had the same issue and contacted Xperia Support. They told me to send the device in - so I backed up my data, resetted the phone and sent it to the support Center. A few days later I got it back with the note that they could not find any problems and I should check my headphones (I already mentioned that I had crosschecked with different devices and several pairs of headphones..)
Long story short, I sent it to the support Center three (!!!) times. Including backing up data, resetting the phone and restoring data three times... After the third time they replaced the phone by a "new" one but still didn´t really seem to be able to reproduce the error.
That was right before christmas and guess what... the new phone just started the Smart Connect Software without any headphones connected....
I would really like to know if (and how) you solved the problem with your phone.
If not... good luck with the Xperia Support..
Cheers,
Mareike

Realtek HD audio problem when recording

Hello guys;
Been trying to do some recording for the first time since the OC was rebuilt. New specs as below.
(By the way, I couldn't get any sound at all until I reinstalled the UAA bus driver..., so it's thanks to this forum that I got sound in the first place!)
Anyway, the problem I now have is that basically the record level is way too high. I use Steinberg Clean 5.0 and was finding that although I could change the levels in the software, whatever level I recorded at I was suffering extreme amounts of clipping/distortion. (I should mention that the input is from a good quality hifi, I used it for many years for recording with my previous PC incarnation using my KT6 delta rig).
After much trial and error, I found that the only way to stop this is to have the recording sound level in volume set to - well it isn't numbered - it would be about 10%. I also discovered that although master recording level is adjustable the others - CD, mic, line, mix are greyed out.
The master level is really difficult to set (as I write I just discovered it's still distorting and I'll have to edged it down another couple of % towards zero), so I really want to change the "line" record level, but as I said it's greyed out.
In Realtek sound manager it's similar, in the record section there's an overall level control but no individual adjustments for record, only playback.
Incidentally playback works just fine!
Realtek drivers are latest 5.10.0.5928 downloaded yesterday from Realtek.
Anyone got any ideas please?
Andrew
Antec Sonata 2 case with 450w Smartpower PSU
+5V, 30A; +3.3V, 32A; +12V, 15A + 17A; -12V, 0.3A; -5V, 2A
MSI P43NEO-F
IntelE7400
4GB OCZ RAM
MSI ATI HD4650 1GB
120, 160, 500GB HDDs
2 optical drives
Etc
Windows XP Home SP3

Quote from: hu479as on 15-September-09, 04:10:19
I think the audio out must be fine as it works just fine for general listening to CDs, LPs (!!), whatever played from the hifi. No distortion even with volume level (in "volume control") set at 100% It's only the record level that's weird :-)
I'll try the headfone thing later, just trying to record something now!
Sorry, I'm not sure if this will help, as I haven't used Realtek HD audio for some time (always used add-in cards). But in my experience, most sound controllers have an option in mixer to select the recording source (e.g. Mic In, Line In, S/PDIF-In, Wave, CD, etc). In particular, many offer a recording source option for "What you hear" or "Stereo Mix". Essentially, this would combine and capture the audio from every available source, rather than from just a single source. I'm guessing it's a long shot but maybe you could change your recording source to this "mix" type (hopefully, something similar is available). To reduce noise you'll probably want to MUTE other sources (Wave, MIDI, CD, etc.), though you could leave them enabled as well (try to avoid things that would inject noise).
I'm only suggesting this approach because you mention that the playback from your hifi is completely fine. Only recording from line-in is distorted. So perhaps, you can work around the problem by recording the mixed playback. It shouldn't make any sense for this to be happening but maybe you'll be lucky?? My (worst-case) thought is that maybe your realtek HD's ADC is damaged and therefore playback is flawless but recording is flawed...
Another thought I had is mixer settings are often stored within an ini file. If you or someone else could identify the file(s), then you should be able to view, and in turn, modify the numeric playback and recording levels. That should aide you in adjusting the levels more precisely, rather than guessing levels via the obscure gui sliders.
It may turn out that none of my ideas are helpful, but I wish you good luck all the same.

Realtek HD Audio: Output:OK, Input (Mic): NOT WORKING??!?!?!?!?!?!?

Hi guys,
I am going to tell you and ask for your advice the wierdest thing happens to my 14-month old Pavilion 6300 series:
- The PC has Realtek HD Audio built-in (on-board) and having the latest driver (I downloaded off from realtek.tw, latest is 5.10.0.5874)
- Before I installed that Realtek driver, I had installed Microsoft UAA Bus driver for HD Audio (version 5.10.0.5010)
- I am running Windows XP Professional SP3
When I plug in a headset (with mic of course, for skype), strange things start like this:
1. I can hear the output sound, the jack can detect which plug I plug in
2. But the INPUT (back or front) which is in my case, the MIC, DOES NOT WORK AT ALL.... Jeeze, it drives me NUT!!!
3. I have turned on ALL the volume related to "MIC" but to no avail. Even the Recording mic volume is grey-out... really no-hope?
4. I did the Hardware test, it could not detect the mic (no movement from the sound bar)
5. The headset works well on other machine!!!!
Can somebody tell me that the onboard card got a problem and I have to buy another card???
Thanks a lot in advance guys, really
James
Message Edited by Jamesnb on 06-26-2009 12:19 PM

now what you can try is can try to test the MotherBoard once and if there is any issue with the onboard card then you have to replace the card.
if there is no issues with the MotherBoard then try entering device manager in safemode and uninstall the drivers once and check if its working.

GT70 2PE Microphone problem / Realtek HD audio

Hi guys,
Since yesterday I have a problem. My mic is recording very low sound.
Both built-in laptop one and the headset (Syberia V2)
I thought that the thing was broken but after playback with a higher volume I could barely hear what I was saying.
Just by doing simple things I found out that the microphone is working fine if I uninstall the Realtek HD audio drivers.
Had an old version, thought that update would fix it but it made no difference.
So the trouble maker is the Realtek HD audio driver.
Found some YouTube videos of how it could have possibly be solved but the thing is that in my case the Realtek HD audio Manager interface does not have all the possible options like Device Advanced Settings button.
Anyone has any advice on what else I could try out?

Quote from: organyx92 on 13-January-15, 00:59:30
Hi guys,
Since yesterday I have a problem. My mic is recording very low sound.
Both built-in laptop one and the headset (Syberia V2)
I thought that the thing was broken but after playback with a higher volume I could barely hear what I was saying.
Just by doing simple things I found out that the microphone is working fine if I uninstall the Realtek HD audio drivers.
Had an old version, thought that update would fix it but it made no difference.
So the trouble maker is the Realtek HD audio driver.
Found some YouTube videos of how it could have possibly be solved but the thing is that in my case the Realtek HD audio Manager interface does not have all the possible options like Device Advanced Settings button.
Anyone has any advice on what else I could try out?
could be creative suite laptop comes with that adjust the sound to speakers but it might affecting the mic to so try emptorary turn it off and record and see if sound is same if not and it goes normal then this suite is doing something so it wont work fully.

PCI Express X-FI Xtreme Audio - Mic and mixer problems

6PCI Express X-FI Xtreme Audio - Mic and mixer problems' Trouble started two days ago when I updated to the latest X-FI drivers. Now I have no mixer and I can't figure out how to get my mic to work. The only thing that has changed is the updating of drivers. I am using senheiser headphones with mic for use on ventrillo. In the old set up I could go into the mixer and tell the software that the Line-In was a mic and it would work perfectly. Now I can't get the mic to work at all since there is no creative mixer. The windows mixer doesn't allow you to do anything worth wild.
I don't have the old software so I can't go back to the old setup. I am using Vista 64. What the heck am I doing wrong? Why won't the software now recognize that I am plugging in a mic!?!?!?
BAH!!!!
PLEASE HELP!

Doesn't Vista have some sort of automatic checkpointing feature that gives you a way to back up to a point before you updated the drivers?
-Dave
?[email protected]

NO PLAYBACK AUDIO CONTROL FOR MIC IN REALTEK HD AUDIO MANAGER.

I have a l355d-s7825 laptop that I can not get my mic to playback through the speakers. I have attached two screen shots that show my computer is missing the volume slider and playback option under mic. I have the latest driver installed with no help. I would appreciate if anyone can shed some light on this issue. Thank you. Oops couldnt get the pics in the attachments....if you google Realtek HD Audio Manager under images you will find the pics im talking about.

Satellite L355D-S7825
This image, Kevin?
I have the latest driver installed...
Sometimes those get corrupted. Did you reinstall?
Realtek Audio Driver for Windows Vista (32/64bit)
Did you try the Realtek control panel instead of the Windows one?
-Jerry

Realtek HD Audio Problems... Plz Help!

I'm currently a temporary DJ for my friend, who's a professionalk DJ, and our party starts in an hour or so. My MacBook, the one I bought last Thanksgiving, the audio on windows won't work. I had Realtek HD Audio, the driver that was on my Leopard dvd. I have always kept my sound muted on XP, so maybe this could be a problem? But the audio won't play, and I've tried playing different mnedia players, Microsoft's WMP and Apple's iTunes. I tried playing a clip from YouTube, all won't play with sound. Any ideas or help??? Thanks.

oops. sorry, I just experimented, I plugged in my iPod earbuds into my laptop, and played the clip. The familiar click sound of the volume adjust was heard, and I pulled the earbuds out and beautiful audio came out on the speakers! So maybe its just the fact that I havent used the speakers on my laptop much. Thanks for looking anyway, and problem solved!

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

GX60 Audio/Mic Analogue problem

Hi
I have a problem where when I plug in a brand new headset (Razer Kraken Pro), Realtek HD Audio Manager won't detect this in my GX60 (AMD one with the 7970 and win8 64bit OS)
Not sure what to do, I have updated drivers, and also made sure that the headset works when I plug it into another computer.
Tried installing CCC however audio drivers always fail to install correctly.
My laptop is approximately 1 week old.
Other Details that might help:
- All devices are working properly and are enabled
- In audio devices, under Sound, Realtek digital output says 'not plugged in' even when headset is plugged in. Same with Recording with the microphone.
- Latest drivers have been updated
- I did receive a CD with all the drivers to install on it, however I misread and tried to install CCC first before installing the drivers (and still got audio driver error).
Any help would be greatly appreciated.

Now, I don't have a GX60, so I don't know what the connectors are like, but are you certain that you're plugging them into the correct connectors on the laptop? If you happened to be connecting them to the surround outputs (ie the rear and/or center/sub outputs) it might not get recognized properly.....

HP update of Realtek HD audio SP64224 version. 6.0.1.7071 fails -5009 : 0x8002802b

Hi,
Just got ouf of the box HP Pavilion 15-n056so.
EDIT: product number F4C38EA#UUW
All windows 8.0 updates available was installed, then 8.1 windows update was installed.
Origin and battlefield4 was installed.
I used HP Support Assistance to install those drivers and programs it suggested but ran into problems with Realtek update SP64224. This fails. I tried to find more details but none in event viewer.
Did some searching and found from HP sites the same driver package separately downloadable.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=fi&lc=en&dlc=fi&softwareitem=ob-125625-1
When I tried to install this manually (not using HP Support Assistant), I got error:
Virhekoodi: -5009 : 0x8002802b
Virheilmoitus:
>Ctor\ObjectWrapper.cpp (163)
>Ctor\ObjectWrapper.cpp (402)
>Kernel\Component.cpp (1163)
>Kernel\CABFile.cpp (389)
>SetupDLL\SetupDLL.cpp (1541)
pAPP:Realtek High Definition Audio Driver
PVENDOR:Realtek Semiconductor Corp.
PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc
$11.50.0.42618
@Windows (9200) BT_OTHER 546.548
Did some searching again and found some discussions where realtek hd audio should be uninstalled from the Programs and Features. Did that , rebooted, tried again installing through HP Support Assistance + manually and faced same problem again.
I tried renaming folders:
C:\Program Files\Realtek -> C:\Program Files\Realtek_old
C:\Program Files (x86)\Realtek\Audio -> C:\Program Files (x86)\Realtek\Audio_old
änd then running installation manually again. Same problem.
I know what error code means, but why it appears is mystery as well as how it could be installed successfully.
I am also little worried, that when and if the update is done I might face other issues like:
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/video-driver-stopped-responding/td-p/3270697...
I do not know completely what benefit it brings to update the driver to the one suggested by HP support Assistance. It is purely annoying that I can't get the update done as there should not be anything disturbing the installation + the exclamaison mark is extremely annoying as well.
has anyone else had this kind of problem?
Any ideas how to resolve the problem?
Thank you for assistance.

1stHP
please deactivate Virusscanner for uninstall and Install for every driver
Check your Bios Version push Start-Run Msinfo32.exe
New Bios Version is F.12
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64480.exe
please deactivate Virusscanner for install
Realtek HD download
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
AMD Graphics Driver
First uninstall the old reboot and install the new
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64218.exe
Test the new driver
ftp://15.192.45.22/ftp1/pub/softpaq/sp64501-65000/sp64660.exe
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
By the way I got an Satellite M70 - 168 laptop.

Hi
Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
Found this useful knowledge base article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
But dont worry buddy. The Google search engine is the key!
Try to search for this KB835221 patch and Im sure you will find the right one!
The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
Good luck!
Message was edited by: Jayjay

Mic problems with all boards thread! What do we do to fix this or do we need a new boa

I have come the conclusion that this is not just a mic problem but a uni'versal line in problem since several devices can be connected thru my SoundBlaster Li've! 24-bit line in port. I'm assuming its a software problem and it seems to be a common problem. The second possibilty is that part of the board is either defected or assembled incorrectly. Either way everyone seems to have made sure that:
A. there drivers are up to date.
B. they have dissabled any other audio device in windows or in BIOS.
C. there mic won't work no matter what port they attempt.
D. creative software changes of audio devices and mixer still don't change anything.
I came on here for answers yet all i find is questions.
And all seem to be pretty similar. There are many other posts pertaining individual audio cards, yet they all have the same problem. If your having the same problem post here and keep this thread ali've, if you have an answer to your own problems you'd like to share post it here. Hoping for a Creative response to either my post or one of the many other posts on the same subject.Message Edited by syferus on 09-23-2005 0:30 AM

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

REALTEK HD AUDIO MIC PROBLEM !!!

Similar Messages

Maybe you are looking for