Realtek HD Audio - Sound goes away and speakers crackle.
Has anyone found a solution to this yet. I've tried everything that anyone has mentioned regarding losing my sound. I've installed drivers from HP's site and from Realtek's. I've tried running the sound troubleshooter. I've enabled onboard audio from the BIOS settings. Nothing has worked. Is this a conflict with Windows 7?
http://twitter.com/cthemenway
Has anyone found a solution to this yet. I cannot figure out what's going on with my audio. It appears that the Realtek Hardware manager will sometimes recognize that the speakers are plugged in and sometimes won't. Sometimes it notifies me that they are plugged in, and then 1 second later says that they aren't. Then it keeps doing that back and forth until I close the message. I've tried everything I can think of, and all suggestions I've been given. Will buying an external sound card be the best solution at this point?
http://twitter.com/cthemenway
Similar Messages
-
Volume slider/icons and in fact, sound goes away randomly.
Well, yes. Sudonly the sounds goes away. And the volume slider and any sound related icons are gone too. Restart...nothing happens. Updated iOS, Restored IPOD, Put it back to factory default, etc. No luck. Any ideas??? Thanks!
Sounds like a hardware issue on the logic board.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Sound goes up and down occasionally, sometimes it crackles right before
Sometimes my sound goes low and then comes back up to the normal volume when I am listening to music, watching a show, or watching something on youtube. I'm not sure what is causing it and the online chat person couldn't figure it out. She when into my speaker setup and enabled all the optional speakers (center, subwoofer, rear pair) and then under "full range speakers" she enabled "front left and right" and also "surround speakers" but that didn't help. Any solutions for this?
HP H9-1400t system
windows 8.1Hi Dave,
Did you upgrade to Win 8.1? Try installing this IDT audio driver for Win 8.1.
If this driver does not help then temporarily use a two speaker setup and use the headphone jack on the top of your tower instead of the rear audio out jack. Your rear input/output audio jacks may be failing. If this is true you may have to replace the mainboard.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est. -
audio sound of loudspeaker and headphone of hp laptop is not working.... pls help me
Hi @manishs400
I understand that you are having trouble with the sound on your speakers and headphones.I am happy to help with this.
Please verify the operating system in use on your notebook. It is possible that it make be a driver related issue. Please seethe following for the HP customized drivers for this notebook.
HP Pavilion dv4-3145tx Entertainment Notebook PC - Software & Drivers
Also you should check out these pages, as it is quite possible you can find a resolution.
No Sound from the Speakers (Windows 8)
Resolving headphones and headset problems (Windows 8)
From Microsoft's support website:
Poor sound quality after upgrading to windows 8.1
Automatically diagnose and fix Windows audio playback problems
Let me know if any of that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.
Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved. -
It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
-
My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.
I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike -
trying to download free trial. creative cloud screen comes up with turning circle in middle. after 2 minutes the screen just goes away and no evidence of download
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430 -
I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1. For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation ABORT YES". If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down. But the next time I use the computer and then shut down the message is back. I have looked to see if there are any downloads pending or if there are any updates trying to download. I am very puzzled.
Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test. -
The sound goes up and down on my hp pavilion dv6
Hello guys
My laptop [ HP notebook dv6 ] with win7 has an issue with sound. The sound goes up and down as I play music (whether it is mp3 or from youtube).Hi,
Can you post back with the full Model No. and Product No. of your dv6 series notebook - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???
Settings > General > Reset > Reset Network Settings
-
Message alert sound goes on and off?? but there is NO message?
message alert sound goes on and off? but there is no message. I just connected with FB, not sure if that's the reason, as there are no contacts showing?
U44M1P2003 - Update 12.1 installation errors | Photoshop Elements, Premiere Elements :
http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html -
The sound goes off and on while typing on keyboard
The sound goes off and on while typing on keyboard
I would try to power cycle the device by holding the sleep/wake button till is says turn off. Maybe even reset by holding the sleep/wake and the home button at the same time. by chance if none of that works back up your device and restore it. Sounds like a software issue so that should fix it. You could always contact apple support aswell.
-
Sound goes off and on when I talk on phone
When I am talking on my iPhone 4, the person on the other end also using an iPhone cannot always hear me because the sound goes off and on. I can hear them just fine, but they cannot hear me for the most part.
I would try to power cycle the device by holding the sleep/wake button till is says turn off. Maybe even reset by holding the sleep/wake and the home button at the same time. by chance if none of that works back up your device and restore it. Sounds like a software issue so that should fix it. You could always contact apple support aswell.
-
Is Oracle AS going away and is Weblogic replacing it?
I haven't been able to find anything definitive, but does anyone know if Oracle AS, Application Server, going away and is Weblogic replacing it?
Thanks,
--JustinTry using a different browser if nothing happens when you click the download link. You should also be able to download via the page linked below.
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Maybe you are looking for
-
i have a table in which for 2 columns i have not null constraint and i have defined unique index for these 2 columns, my question is if i define non unique index for these 2 columns whether the space occupied by these 2 tables will become lesser? if
-
Report Subscription by email error - The SQL Agent service is not running
Hello All, This may be an easy answer, so please excuse my ignorance if I am overlooking something simple. I a simply trying to setup Report Subscriptions to be emailed to me. We currently have essentially 3 servers in use in our environment - a CAS,
-
Focus vertical scroll bar in report div
Hi everyone, I just want to know if the issue has been resolved by someone : I have a report within a div and a vertical scrolling bar to scroll the rows. When I click on a row of the report the row is highlighted. Now, if the clicked row is at the e
-
I need to reinstall my photoshop. What is the appropriate link?
I need to reinstall my photoshop. What is the appropriate link?
-
How to access the magnifier/marquee zoom tool in Reader XI?
The subject says it all, really. Richard