Realtek vs. Creat

How ironic that Realtek have had SEVERAL driver updates released for their audio solutions in the same time frame as CL has released just two. Addd to this Realtek have had WHQL certification for each release, yet CL has yet to issue one driver release with the same. I wonder, how many people actually work on the CL drivers?...two guys down in the dungeon of CLHQ?...chugging down cups of coffee while playing Counter Strike?While we all know CL has been abysmal at drivers since Soundblaster Li've! and 999 to date one would assume an 8 year time frame would allow them to hire more people, devot more resources and MONEY for a team dedicated to driver development. The cycle of 6-9 months per driver release (a la X-Fi) cannot continue, onboard soultions from Realtek, Sigmatel and Analog Devices continue to improve with each generation and as such you'll find more people using onboard sound for their needs. CL, get yer head outta your a** and do something.

The sad part is, with the mess that Creative's Vista drivers are in, I have been contemplating using my onboard realtek sound, for the time being, until Creatives gets their act together, with respect to Vista. The only thing really holding me back is the fact that I heavily use the front Headphone/mic port of my X-Fi Platinum. When not gaming, I unplug the headphone/microphone, so to not be in the way. Using the onboard sound, everything would be plugged in the back of the computer, which is a PITA to unplug/plugin. This latest release did nothing to quell this desire either.

Similar Messages

  • Will Realtek AC97 create proble

    HI
    I am considering purchasing either the Audigy 2 ZS Platinum, or the Audigy 2 ZS Gamer internal sound cards. I have an Intel Pentium 4 computer which came with the realtek built in sound chip on a Bit IS7-E2 motherboard. The operating system is Windows XP Pro with SP2.
    I have read that I need to disable the Realtek through bios. I have been unable to find any settings to let me do this when I go into bios set up.
    My computer came with an Intel Pentium 4 processor (3GHZ), and Gig of memory, and a 60 gig hard dri've. There is also a feature called called hyper threading.
    Will I be able to have either of the above sound cards installed without too much difficulty. I would appreciate any advice.
    Thanks
    Aron

    Thanks for the information. I found the "onChip Audio Controller" buried in integrated peripherals/OnChip Pci Device/OnChip Audio controller.
    Once I disable the audio controller, is it necessary to remove all of the other related items such as Audio codecs, Legacy audio drivers, Realtek ac97 audio, usb audio device? I found these in system/device manager/sound vidio and game controllers.
    Also, I read a user review saying that hyper threading caused problems with his sound card. Is this an area of concern?
    Thanks again for your assistance.
    Aron

  • Sound - No microphone gain ?

    MSI P35 Neo 2 FS
    Intel E8400 processor
    2 x 1 Gig Corsair Ram
    8800 GT Graphics card
    550 watt Trust PSU
    Window Xp Home Edition.
    Realtek ALC 888/888T audio.
    When I try and connect to SKYPE the recipient informs me that my microphone volume is
    too low, as he was unable to hear properly.
    I went to the Realtek control panel and I was unable to find a "gain" control for the mic.
    Does any one know if there is such a control on the above mentioned panel?
    I then went into Windows and found that the microphone control was disabled and I
    could not use.
    I then checked my connections on my headphone & mic. they were OK. I re installed
    the Realtek drivers, and still the same problem.
    I finally went to the SKYPE audio section and was able to adjust the microphone
    setting from their. Has any one else had a similar problem?

    Quote
    well sure where there should be a gain option in microsoft sound options not realteks.
    There is one, you just have to configure the Microsoft Panel properly, in order to access that option.
    Quote
    But it would seem under xp ( maybe not vista) this option is missing or unavailable.
    It is neither missing nor is it unavailable.  It is just in a place were you won't expect it intuitively.
    Quote
    Realtek & msi need to sort this out.
    Not quite right. MSI (or ASUS, ABIT, ASROCK, GIGABYTE, DELL etc.) do not have anything to do with the Realtek Drivers themselves, the Realtek HD Audio Manager Interface or the Functionality of the whole HD Audio Driver Packet.  Realtek (and Realtek only) creates and distributes these standard drivers.  So if you want to complain (I did that myself a couple of times already), do that it here:
    http://www.realtek.com.tw/contact/
    Quote
    didnt allow for the gain option to show properlly in the microsoft sound options.
    As I said before, you just have to configure the Windows Audio Panel properly.  My Windows XP Version is German but I hope you will figure it out anyway.
    Open the Panel and access properties:
    Now select the Audio Jack you want to configure:
    Enable "Advanced Options" which will give you an additional Button for "Advanced" Options under the corresponding audio jacks ("Front Green In" in my example):
    Click on the box to get access to advanced options (including microphone gain/boost):
    DONE.

  • Realtek ethernet initialization slow [SOLVED]

    Hello!
    I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
    I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
    DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)
    Here is my netcfg profile:
    CONNECTION='ethernet'
    DESCRIPTION='Ethernet connection at home'
    INTERFACE='eth0'
    IP='dhcp'
    ## for DHCPv6
    #IP6='dhcp'
    ## for IPv6 autoconfiguration
    #IP6='stateless
    This is the output from lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    This is the output from dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    [ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D7FFF write-protect
    [ 0.000000] D8000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
    [ 0.000000] 0000000000 - 00bfe00000 page 2M
    [ 0.000000] 00bfe00000 - 00bfed0000 page 4k
    [ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
    [ 0.000000] RAMDISK: 37dca000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
    [ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
    [ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
    [ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
    [ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
    [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bfed0
    [ 0.000000] On node 0 totalpages: 786015
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10692 pages used for memmap
    [ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1828.793 MHz processor.
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003483] Security Framework initialized
    [ 0.003491] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011485] Mount-cache hash table entries: 256
    [ 0.012020] Initializing cgroup subsys cpuacct
    [ 0.012063] Initializing cgroup subsys memory
    [ 0.012087] Initializing cgroup subsys devices
    [ 0.012090] Initializing cgroup subsys freezer
    [ 0.012092] Initializing cgroup subsys net_cls
    [ 0.012095] Initializing cgroup subsys blkio
    [ 0.012163] CPU: Physical Processor ID: 0
    [ 0.012165] CPU: Processor Core ID: 0
    [ 0.012168] mce: CPU supports 6 MCE banks
    [ 0.012178] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012185] using mwait in idle threads.
    [ 0.013589] ACPI: Core revision 20110413
    [ 0.020015] ftrace: allocating 16144 entries in 64 pages
    [ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
    [ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.059996] PEBS disabled due to CPU errata.
    [ 0.059996] ... version: 2
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 2
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 000000007fffffff
    [ 0.059996] ... fixed-purpose events: 3
    [ 0.059996] ... event mask: 0000000700000003
    [ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103342] Booting Node 0, Processors #1 Ok.
    [ 0.103346] smpboot cpu 1: start_ip = 9a000
    [ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206659] Brought up 2 CPUs
    [ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
    [ 0.207867] devtmpfs: initialized
    [ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
    [ 0.210342] print_constraints: dummy:
    [ 0.210439] NET: Registered protocol family 16
    [ 0.210574] ACPI: bus type pci registered
    [ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.251674] PCI: Using configuration type 1 for base access
    [ 0.252194] bio: create slab <bio-0> at 0
    [ 0.254077] ACPI: EC: Look up EC in DSDT
    [ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    [ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
    [ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258077] ACPI: Dynamic OEM Table Load:
    [ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258557] ACPI: Dynamic OEM Table Load:
    [ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259142] ACPI: Dynamic OEM Table Load:
    [ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259584] ACPI: Dynamic OEM Table Load:
    [ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259886] ACPI: Interpreter enabled
    [ 0.259890] ACPI: (supports S0 S3 S4 S5)
    [ 0.259911] ACPI: Using IOAPIC for interrupt routing
    [ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.267597] ACPI: No dock devices found.
    [ 0.267599] HEST: Table not found.
    [ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
    [ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.268730] pci 0000:00:01.0: PME# disabled
    [ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    [ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    [ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    [ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.269161] pci 0000:00:1a.7: PME# disabled
    [ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    [ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.269317] pci 0000:00:1b.0: PME# disabled
    [ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.269450] pci 0000:00:1c.0: PME# disabled
    [ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.269585] pci 0000:00:1c.1: PME# disabled
    [ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.269726] pci 0000:00:1c.5: PME# disabled
    [ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    [ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    [ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    [ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    [ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.270263] pci 0000:00:1d.7: PME# disabled
    [ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
    [ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    [ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    [ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    [ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    [ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    [ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    [ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.270847] pci 0000:00:1f.2: PME# disabled
    [ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
    [ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
    [ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
    [ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
    [ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
    [ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.271808] pci 0000:02:00.0: PME# disabled
    [ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
    [ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
    [ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.272315] pci 0000:08:00.0: supports D1 D2
    [ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.272325] pci 0000:08:00.0: PME# disabled
    [ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
    [ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
    [ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
    [ 0.272587] pci 0000:09:09.0: supports D1 D2
    [ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272595] pci 0000:09:09.0: PME# disabled
    [ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
    [ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
    [ 0.272735] pci 0000:09:09.1: supports D1 D2
    [ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272744] pci 0000:09:09.1: PME# disabled
    [ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
    [ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
    [ 0.272884] pci 0000:09:09.2: supports D1 D2
    [ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272892] pci 0000:09:09.2: PME# disabled
    [ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
    [ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
    [ 0.273031] pci 0000:09:09.3: supports D1 D2
    [ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.273039] pci 0000:09:09.3: PME# disabled
    [ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
    [ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.278894] vgaarb: loaded
    [ 0.278896] vgaarb: bridge control possible 0000:01:00.0
    [ 0.279005] PCI: Using ACPI for IRQ routing
    [ 0.291398] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
    [ 0.291700] NetLabel: Initializing
    [ 0.291703] NetLabel: domain hash size = 128
    [ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291722] NetLabel: unlabeled traffic allowed by default
    [ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.303337] Switching to clocksource hpet
    [ 0.306534] Switched to NOHz mode on CPU #0
    [ 0.306616] Switched to NOHz mode on CPU #1
    [ 0.311449] pnp: PnP ACPI init
    [ 0.311470] ACPI: bus type pnp registered
    [ 0.312253] pnp 00:00: [bus 00-ff]
    [ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.312836] pnp 00:02: [io 0x0000-0x001f]
    [ 0.312838] pnp 00:02: [io 0x0081-0x0091]
    [ 0.312841] pnp 00:02: [io 0x0093-0x009f]
    [ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.312845] pnp 00:02: [dma 4]
    [ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.313126] pnp 00:05: [io 0x00f0]
    [ 0.313138] pnp 00:05: [irq 13]
    [ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.313201] pnp 00:06: [io 0x002e-0x002f]
    [ 0.313203] pnp 00:06: [io 0x004e-0x004f]
    [ 0.313205] pnp 00:06: [io 0x0061]
    [ 0.313208] pnp 00:06: [io 0x0063]
    [ 0.313210] pnp 00:06: [io 0x0065]
    [ 0.313212] pnp 00:06: [io 0x0067]
    [ 0.313214] pnp 00:06: [io 0x0080]
    [ 0.313216] pnp 00:06: [io 0x0092]
    [ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
    [ 0.313220] pnp 00:06: [io 0x0380-0x0383]
    [ 0.313222] pnp 00:06: [io 0x0680-0x069f]
    [ 0.313224] pnp 00:06: [io 0x0800-0x080f]
    [ 0.313226] pnp 00:06: [io 0x1000-0x107f]
    [ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
    [ 0.313231] pnp 00:06: [io 0x1640-0x164f]
    [ 0.313233] pnp 00:06: [io 0xfe00]
    [ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
    [ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
    [ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
    [ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
    [ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
    [ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
    [ 0.313357] system 00:06: [io 0xfe00] has been reserved
    [ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
    [ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
    [ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
    [ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
    [ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313478] pnp 00:08: [io 0x0070-0x0077]
    [ 0.313485] pnp 00:08: [irq 8]
    [ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.313607] pnp 00:09: [io 0x0060]
    [ 0.313609] pnp 00:09: [io 0x0064]
    [ 0.313615] pnp 00:09: [irq 1]
    [ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.313688] pnp 00:0a: [irq 12]
    [ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.313774] pnp: PnP ACPI: found 11 devices
    [ 0.313776] ACPI: ACPI bus type pnp unregistered
    [ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
    [ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
    [ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
    [ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    [ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    [ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
    [ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
    [ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.320596] pci 0000:00:01.0: setting latency timer to 64
    [ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
    [ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
    [ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
    [ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
    [ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
    [ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
    [ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
    [ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
    [ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
    [ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
    [ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
    [ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320830] NET: Registered protocol family 2
    [ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.329690] TCP reno registered
    [ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.330176] NET: Registered protocol family 1
    [ 0.330392] pci 0000:01:00.0: Boot video device
    [ 0.330419] PCI: CLS 64 bytes, default 64
    [ 0.330488] Unpacking initramfs...
    [ 0.369353] Freeing initrd memory: 2200k freed
    [ 0.370476] Simple Boot Flag at 0x35 set to 0x1
    [ 0.370972] audit: initializing netlink socket (disabled)
    [ 0.370988] type=2000 audit(1320586961.369:1): initialized
    [ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.401147] VFS: Disk quotas dquot_6.5.2
    [ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.401521] msgmni has been set to 6037
    [ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.401833] io scheduler noop registered
    [ 0.401836] io scheduler deadline registered
    [ 0.401898] io scheduler cfq registered (default)
    [ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.402686] intel_idle: MWAIT substates: 0x22220
    [ 0.402689] intel_idle: does not run on family 6 model 15
    [ 0.402694] ERST: Table is not found!
    [ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.603627] Linux agpgart interface v0.103
    [ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.625141] mousedev: PS/2 mouse device common for all mice
    [ 0.627290] rtc_cmos 00:08: RTC can wake from S4
    [ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.627461] cpuidle: using governor ladder
    [ 0.627463] cpuidle: using governor menu
    [ 0.627728] TCP cubic registered
    [ 0.627731] NET: Registered protocol family 17
    [ 0.627740] Registering the dns_resolver key type
    [ 0.627861] PM: Hibernation image not present or could not be loaded.
    [ 0.627867] registered taskstats version 1
    [ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
    [ 0.637554] Initializing network drop monitor service
    [ 0.639163] Freeing unused kernel memory: 712k freed
    [ 0.639370] Write protecting the kernel read-only data: 6144k
    [ 0.639542] Freeing unused kernel memory: 12k freed
    [ 0.642762] Freeing unused kernel memory: 776k freed
    [ 0.652005] udevd[37]: starting version 174
    [ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.712421] usbcore: registered new interface driver usbfs
    [ 0.712452] usbcore: registered new interface driver hub
    [ 0.712861] usbcore: registered new device driver usb
    [ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    [ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.733616] hub 1-0:1.0: USB hub found
    [ 0.733621] hub 1-0:1.0: 4 ports detected
    [ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    [ 0.756276] SCSI subsystem initialized
    [ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.763606] hub 2-0:1.0: USB hub found
    [ 0.763612] hub 2-0:1.0: 6 ports detected
    [ 0.766819] libata version 3.00 loaded.
    [ 0.768867] ahci 0000:00:1f.2: version 3.0
    [ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    [ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    [ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.769769] scsi0 : ahci
    [ 0.770124] scsi1 : ahci
    [ 0.770204] scsi2 : ahci
    [ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
    [ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
    [ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
    [ 0.780764] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.781218] scsi3 : ata_piix
    [ 0.781306] scsi4 : ata_piix
    [ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    [ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    [ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    [ 0.857662] hub 3-0:1.0: USB hub found
    [ 0.857667] hub 3-0:1.0: 2 ports detected
    [ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    [ 0.857993] hub 4-0:1.0: USB hub found
    [ 0.857998] hub 4-0:1.0: 2 ports detected
    [ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    [ 0.858306] hub 5-0:1.0: USB hub found
    [ 0.858311] hub 5-0:1.0: 2 ports detected
    [ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    [ 0.858621] hub 6-0:1.0: USB hub found
    [ 0.858625] hub 6-0:1.0: 2 ports detected
    [ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    [ 0.858914] hub 7-0:1.0: USB hub found
    [ 0.858919] hub 7-0:1.0: 2 ports detected
    [ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
    [ 0.963614] ata4.00: configured for MWDMA2
    [ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
    [ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091933] ata1.00: configured for UDMA/100
    [ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.092044] ata3.00: configured for UDMA/100
    [ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
    [ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
    [ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 1.127901] sdb: sdb1
    [ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.135068] sda: sda1 sda2 sda3
    [ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
    [ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
    [ 1.373358] Switching to clocksource tsc
    [ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
    [ 3.620978] udevd[241]: starting version 174
    [ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 3.860538] ACPI: Power Button [PWRB]
    [ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 3.860983] ACPI: Sleep Button [SLPB]
    [ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 3.863014] ACPI: Lid Switch [LID]
    [ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.865301] ACPI: Power Button [PWRF]
    [ 3.954841] ACPI: acpi_idle registered with cpuidle
    [ 3.958941] Monitor-Mwait will be used to enter C-1 state
    [ 3.959002] Monitor-Mwait will be used to enter C-2 state
    [ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.959341] Monitor-Mwait will be used to enter C-3 state
    [ 3.959379] Marking TSC unstable due to TSC halts in idle
    [ 3.960679] Switching to clocksource hpet
    [ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
    [ 3.964908] acpi device:05: registered as cooling_device1
    [ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
    [ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 3.979831] r592: driver successfully loaded
    [ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.114730] iTCO_vendor_support: vendor-support=0
    [ 4.188196] wmi: Mapper loaded
    [ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 4.327775] sdhci: Secure Digital Host Controller Interface driver
    [ 4.327778] sdhci: Copyright(c) Pierre Ossman
    [ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
    [ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
    [ 4.340202] Registered led device: mmc0::
    [ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
    [ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4.348208] [drm] Initialized drm 1.1.0 20060810
    [ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
    [ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
    [ 4.374333] usbcore: registered new interface driver usbhid
    [ 4.374336] usbhid: USB HID core driver
    [ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
    [ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
    [ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
    [ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 4.420843] Initializing USB Mass Storage driver...
    [ 4.420973] scsi5 : usb-storage 2-2:1.0
    [ 4.421105] usbcore: registered new interface driver usb-storage
    [ 4.421107] USB Mass Storage support registered.
    [ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 4.438830] Linux media interface: v0.10
    [ 4.439547] usbcore: registered new interface driver uas
    [ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.472037] Linux video capture interface: v2.00
    [ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
    [ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
    [ 4.492141] usbcore: registered new interface driver uvcvideo
    [ 4.492144] USB Video Class driver (v1.1.0)
    [ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
    [ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
    [ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    [ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.663396] r852: Non dma capable device detected, dma disabled
    [ 4.663425] r852: driver loaded successfully
    [ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
    [ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
    [ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
    [ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
    [ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
    [ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
    [ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
    [ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
    [ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
    [ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
    [ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
    [ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
    [ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
    [ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
    [ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
    [ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
    [ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
    [ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
    [ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
    [ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
    [ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
    [ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
    [ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
    [ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
    [ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
    [ 4.810125] [TTM] Initializing pool allocator.
    [ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 4.845721] Registered led device: phy0-led
    [ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
    [ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    [ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
    [ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.885059] [drm] No driver support for vblank timestamp query.
    [ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
    [ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
    [ 5.102069] fbcon: nouveaufb (fb0) is primary device
    [ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
    [ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    [ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
    [ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.430063] sdc: sdc1
    [ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 6.160954] Console: switching to colour frame buffer device 180x56
    [ 6.163432] fb0: nouveaufb frame buffer device
    [ 6.163434] drm: registered panic notifier
    [ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    [ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
    [ 9.143563] r8169 0000:08:00.0: eth0: link down
    [ 9.143572] r8169 0000:08:00.0: eth0: link down
    [ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
    [ 13.659460] NET: Registered protocol family 10
    [ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.816958] FS-Cache: Loaded
    [ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
    [ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
    [ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 16.372460] wlan0: authenticated
    [ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 16.386885] wlan0: associated
    [ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.491123] Intel AES-NI instructions are not detected.
    [ 16.677727] padlock_aes: VIA PadLock not detected.
    [ 27.296946] wlan0: no IPv6 routers present
    [ 50.863694] r8169 0000:08:00.0: eth0: link up
    [ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
    [ 61.110061] eth0: no IPv6 routers present
    [ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
    [ 356.840075] cfg80211: Calling CRDA for country: DE
    [ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 360.658086] wlan0: authenticated
    [ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 360.670550] wlan0: associated
    The slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
    Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
    Is there anything I can do to make my ethernet card initialize faster?
    If you need any more information, please ask.
    Last edited by rtoijala (2011-11-07 14:32:27)

    Strike0 wrote:... but dont you need some sort of dhcp client/or daemon for that as well?
    Try adding dhcpd to your rc.conf array.
    Netcfg seems to automatically start dhcpcd (I can see it htop).
    Strike0 wrote:Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
    This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
    Strike0 wrote:what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
    Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
    ratcheer wrote:What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
    My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
    Thanks.
    EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
    Last edited by rtoijala (2011-11-07 14:32:47)

  • T400 realtek wifi fails after short use, given IOMMU errors in dmesg

    Hello, thanks for reading.
    The title explains the problem pretty well.  I can connect to any given network just fine through wicd, but after a short bit of use the networking entirely stops and if I try to make any changes I get what I assume is a kernel panic and the whole system stops responding, short of the caps lock blinking.
    Relevant outputs include:
    dmesg:
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Oct 23 10:03:24 CEST 2009
    Command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f36000 - 37fef4e4
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0001000000 - 00016837d0] TEXT DATA BSS ==> [0001000000 - 00016837d0]
    #3 [0037f36000 - 0037fef4e4] RAMDISK ==> [0037f36000 - 0037fef4e4]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [0001684000 - 000168414c] BRK ==> [0001684000 - 000168414c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 107 pages reserved
    DMA zone: 3830 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 28 pages at ffff880028035000, static data 82400 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047095
    Kernel command line: root=/dev/disk/by-uuid/746ab7a4-69f4-450c-bfe0-3a9f9cdd7a09 ro vga=791
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8114824k/9371648k available (3628k kernel code, 1054712k absent, 201116k reserved, 1500k data, 484k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    NR_IRQS:768
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2527.220 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.04 BogoMIPS (lpj=8424066)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Counters: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic counters: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose counters: 3
    ... counter mask: 0000000700000003
    ACPI: Core revision 20090521
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5055.55 BogoMIPS (lpj=8423280)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    mce: CPU supports 6 MCE banks
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10112.59 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 741k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257200918.329:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15852
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 484k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    Switched to high resolution mode on CPU 0
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    Switched to high resolution mode on CPU 1
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda3): INFO: recovery required on readonly filesystem
    EXT4-fs (sda3): write access will be enabled during recovery
    EXT4-fs (sda3): barriers enabled
    EXT4-fs (sda3): delayed allocation enabled
    EXT4-fs: file extents enabled
    kjournald2 starting: pid 596, dev sda3:8, commit interval 5 seconds
    EXT4-fs: mballoc enabled
    EXT4-fs (sda3): orphan cleanup on readonly fs
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30918
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30917
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30916
    EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 30915
    EXT4-fs (sda3): 4 orphan inodes deleted
    EXT4-fs (sda3): recovery complete
    EXT4-fs (sda3): mounted filesystem with ordered data mode
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    iTCO_vendor_support: vendor-support=0
    Monitor-Mwait will be used to enter C-1 state
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Monitor-Mwait will be used to enter C-2 state
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Non-volatile memory driver v1.3
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ACPI: AC Adapter [AC] (off-line)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor LNXCPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ricoh-mmc: Controller is now disabled.
    ===============>NIC 8192SE
    uhci_hcd: USB Universal Host Controller Interface driver
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Dot11d_Init()
    IRQ 17
    ACPI: WMI: Mapper loaded
    ACPI: Battery Slot [BAT0] (battery present)
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (33 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (42 C)
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    thinkpad_acpi: radio switch found; radios are disabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    Registered led device: tpacpi::thinkvantage
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    [drm] radeon default to kernel modesetting.
    [drm] radeon kernel modesetting enabled.
    radeon 0000:01:00.0: power state changed by ACPI to D0
    radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    radeon 0000:01:00.0: setting latency timer to 64
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    [drm] radeon: Initializing kernel modesetting.
    [drm:radeon_driver_load_kms] *ERROR* Failed to initialize radeon, disabling IOCTL
    radeon 0000:01:00.0: PCI INT A disabled
    radeon: probe of 0000:01:00.0 failed with error -22
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-6: new high speed USB device using ehci_hcd and address 2
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    usb 1-6: configuration #1 chosen from 1 choice
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    Clocksource tsc unstable (delta = -76024863 ns)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input13
    EXT4-fs (sda3): internal journal on sda3:8
    EXT4-fs (sda4): barriers enabled
    kjournald2 starting: pid 1210, dev sda4:8, commit interval 5 seconds
    EXT4-fs (sda4): internal journal on sda4:8
    EXT4-fs (sda4): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda4): mounted filesystem with ordered data mode
    Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    GPIOChangeRF - HW Radio OFF
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    Save max pwr
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    domain 1: span 0-1 level CPU
    groups: 0-1 (__cpu_power = 2048)
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    eth0: no IPv6 routers present
    fuse init (API version 7.12)
    ================>r8192_wx_set_scan(): hwradio off
    ================>r8192_wx_set_scan(): hwradio off
    GPIOChangeRF - HW Radio ON, RF ON
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    =========>r8192_wx_set_scan(): IPSLeave
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    rtl819xSE:==========>rtl8192_down()
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Save max pwr
    rtl819xSE:<==========rtl8192_down()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Linking with Wireless Network,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    Association response status code 0xc
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    Linking with Wireless Network,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
    ===>ieee80211_associate_procedure_wq(), chan:1
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:65,assocresp_ies_len:53
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c,
    Associated successfully
    ============>normal associate
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    EAPOL TranslateHeader(), pTcb->DataRate = 0x2
    alg name:TKIP
    rtl819xSE:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr00:1c:10:cf:29:72
    rtl819xSE:=========>after set key, usconfig:8008
    alg name:TKIP
    rtl819xSE:====>to setKey(), dev:ffff880238230000, EntryNo:1, KeyIndex:1, KeyType:2, MacAddrff:ff:ff:ff:ff:ff
    rtl819xSE:=========>after set key, usconfig:8009
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    0000:00:19.0: eth0: 10/100 speed: disabling TSO
    ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:10:cf:29:72
    wlan0: no IPv6 routers present
    eth0: no IPv6 routers present
    e1000e: eth0 NIC Link is Down
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    eth0 Link encap:Ethernet HWaddr 00:24:7E:6F:CF:41
    inet6 addr: fe80::224:7eff:fe6f:cf41/64 Scope:Link
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    RX bytes:240 (240.0 b) TX bytes:936 (936.0 b)
    Memory:fc200000-fc220000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:16 errors:0 dropped:0 overruns:0 frame:0
    TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2160 (2.1 Kb) TX bytes:2160 (2.1 Kb)
    wlan0 Link encap:Ethernet HWaddr 00:26:5E:EA:64:78
    inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::226:5eff:feea:6478/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17 Memory:ffffc90000068000-ffffc90000068100
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
    00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3400 Series
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
    15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
    15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
    15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
    15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
    15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
    15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
    This line:
    DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:03:00.0
    I get a whole bunch of times after it first appears in dmesg.  I've googled this error without the address on the end and it seems there isn't much of a solution that I'm aware of.  I don't know what to do from here!  Guidance is so very appreciated.

    Same here, I've tried without wicd.  The problem reproduces exactly the same.
    Also, I've googled around and it seems like this is a recurring bug. 
    I tried passing iommu=force to the kernal during boot and from there, the card works slowly.  I also get a different error array in DMESG from there.  The end of it is as follows:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
    BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    BIOS-e820: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    BIOS-e820: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    BIOS-e820: 00000000bfa0f000 - 00000000bfac6000 (usable)
    BIOS-e820: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    BIOS-e820: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    BIOS-e820: 00000000bfad4000 - 00000000bfad8000 (reserved)
    BIOS-e820: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    BIOS-e820: 00000000bfadc000 - 00000000bfadf000 (reserved)
    BIOS-e820: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    BIOS-e820: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    BIOS-e820: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    BIOS-e820: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
    BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023c000000 (usable)
    DMI present.
    last_pfn = 0x23c000 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-D3FFF write-protect
    D4000-DBFFF uncachable
    DC000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 23C000000 mask FFC000000 uncachable
    1 base 000000000 mask F80000000 write-back
    2 base 080000000 mask FC0000000 write-back
    3 base 100000000 mask F00000000 write-back
    4 base 200000000 mask FC0000000 write-back
    5 disabled
    6 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfe00 max_arch_pfn = 0x100000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf8a1000 (usable)
    modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
    modified: 00000000bf8a7000 - 00000000bf9b7000 (usable)
    modified: 00000000bf9b7000 - 00000000bfa0f000 (reserved)
    modified: 00000000bfa0f000 - 00000000bfac6000 (usable)
    modified: 00000000bfac6000 - 00000000bfad1000 (ACPI NVS)
    modified: 00000000bfad1000 - 00000000bfad4000 (ACPI data)
    modified: 00000000bfad4000 - 00000000bfad8000 (reserved)
    modified: 00000000bfad8000 - 00000000bfadc000 (ACPI NVS)
    modified: 00000000bfadc000 - 00000000bfadf000 (reserved)
    modified: 00000000bfadf000 - 00000000bfb06000 (ACPI NVS)
    modified: 00000000bfb06000 - 00000000bfb08000 (ACPI data)
    modified: 00000000bfb08000 - 00000000bfd0f000 (reserved)
    modified: 00000000bfd0f000 - 00000000bfd9f000 (ACPI NVS)
    modified: 00000000bfd9f000 - 00000000bfdff000 (ACPI data)
    modified: 00000000bfdff000 - 00000000bfe00000 (usable)
    modified: 00000000bfe00000 - 00000000c0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed10000 - 00000000fed14000 (reserved)
    modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff800000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023c000000 (usable)
    init_memory_mapping: 0000000000000000-00000000bfe00000
    0000000000 - 00bfe00000 page 2M
    kernel direct mapping tables up to bfe00000 @ 8000-c000
    init_memory_mapping: 0000000100000000-000000023c000000
    0100000000 - 023c000000 page 2M
    kernel direct mapping tables up to 23c000000 @ a000-14000
    RAMDISK: 37f4a000 - 37fef0b7
    ACPI: RSDP 00000000000f64e0 00024 (v02 LENOVO)
    ACPI: XSDT 00000000bfd6a273 0009C (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: FACP 00000000bfd6a400 000F4 (v03 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: DSDT 00000000bfd6a7db 0F3FB (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: FACS 00000000bfd8e000 00040
    ACPI: SSDT 00000000bfd6a5b4 00227 (v01 LENOVO TP-7U 00002160 MSFT 03000000)
    ACPI: ECDT 00000000bfd79bd6 00052 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: APIC 00000000bfd79c28 00078 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: MCFG 00000000bfd79ca0 0003C (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: HPET 00000000bfd79cdc 00038 (v01 LENOVO TP-7U 00002160 LNVO 00000001)
    ACPI: SLIC 00000000bfd79dc2 00176 (v01 LENOVO TP-7U 00002160 LTP 00000000)
    ACPI: BOOT 00000000bfd79f38 00028 (v01 LENOVO TP-7U 00002160 LTP 00000001)
    ACPI: ASF! 00000000bfd79f60 000A0 (v16 LENOVO TP-7U 00002160 PTL 00000001)
    ACPI: SSDT 00000000bfd8d213 0054F (v01 LENOVO TP-7U 00002160 INTL 20050513)
    ACPI: TCPA 00000000bfb07000 00032 (v00 00000000 00000000)
    ACPI: DMAR 00000000bfb06000 000D8 (v01 00000001 00000000)
    ACPI: SSDT 00000000bfad3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 023c000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037f4a000 - 0037fef0b7] RAMDISK ==> [0037f4a000 - 0037fef0b7]
    #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
    #5 [000082e000 - 000082e14c] BRK ==> [000082e000 - 000082e14c]
    #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
    #7 [000000a000 - 000000f000] PGTABLE ==> [000000a000 - 000000f000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023c000
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9b7
    0: 0x000bfa0f -> 0x000bfac6
    0: 0x000bfdff -> 0x000bfe00
    0: 0x00100000 -> 0x0023c000
    On node 0 totalpages: 2079234
    DMA zone: 56 pages used for memmap
    DMA zone: 1688 pages reserved
    DMA zone: 2249 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 766625 pages, LIFO batch:31
    Normal zone: 17696 pages used for memmap
    Normal zone: 1276640 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
    PM: Registered nosave memory: 00000000bf9b7000 - 00000000bfa0f000
    PM: Registered nosave memory: 00000000bfac6000 - 00000000bfad1000
    PM: Registered nosave memory: 00000000bfad1000 - 00000000bfad4000
    PM: Registered nosave memory: 00000000bfad4000 - 00000000bfad8000
    PM: Registered nosave memory: 00000000bfad8000 - 00000000bfadc000
    PM: Registered nosave memory: 00000000bfadc000 - 00000000bfadf000
    PM: Registered nosave memory: 00000000bfadf000 - 00000000bfb06000
    PM: Registered nosave memory: 00000000bfb06000 - 00000000bfb08000
    PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000
    PM: Registered nosave memory: 00000000bfd0f000 - 00000000bfd9f000
    PM: Registered nosave memory: 00000000bfd9f000 - 00000000bfdff000
    PM: Registered nosave memory: 00000000bfe00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
    PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880028035000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045514
    Kernel command line: root=/dev/disk/by-uuid/b86db434-e877-45bf-bc56-65187c632662 ro vga=791 iommu=force
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2526.745 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 8100960k/9371648k available (3409k kernel code, 1054712k absent, 214984k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.05 BogoMIPS (lpj=8422483)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5056.56 BogoMIPS (lpj=8423300)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (10111.61 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e3ffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:19.0: reg 10 32bit mmio: [0xfc200000-0xfc21ffff]
    pci 0000:00:19.0: reg 14 32bit mmio: [0xfc225000-0xfc225fff]
    pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
    pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:19.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc220000-0xfc223fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
    pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.2: reg 10 io port: [0x1c40-0x1c47]
    pci 0000:00:1f.2: reg 14 io port: [0x1834-0x1837]
    pci 0000:00:1f.2: reg 18 io port: [0x1838-0x183f]
    pci 0000:00:1f.2: reg 1c io port: [0x1830-0x1833]
    pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
    pci 0000:01:00.0: reg 18 32bit mmio: [0xcfff0000-0xcfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 io port: [0x3000-0x30ff]
    pci 0000:03:00.0: reg 14 32bit mmio: [0xf4200000-0xf4203fff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf4200000-0xf42fffff]
    pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
    pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
    pci 0000:15:00.0: reg 10 32bit mmio: [0xf4300000-0xf4300fff]
    pci 0000:15:00.0: supports D1 D2
    pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.0: PME# disabled
    pci 0000:15:00.1: reg 10 32bit mmio: [0xf4301000-0xf43017ff]
    pci 0000:15:00.1: supports D1 D2
    pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.1: PME# disabled
    pci 0000:15:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff]
    pci 0000:15:00.2: supports D1 D2
    pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.2: PME# disabled
    pci 0000:15:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff]
    pci 0000:15:00.3: supports D1 D2
    pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.3: PME# disabled
    pci 0000:15:00.4: reg 10 32bit mmio: [0xf4302000-0xf43020ff]
    pci 0000:15:00.4: supports D1 D2
    pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.4: PME# disabled
    pci 0000:15:00.5: reg 10 32bit mmio: [0xf4302400-0xf43024ff]
    pci 0000:15:00.5: supports D1 D2
    pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:15:00.5: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x6000-0x9fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xf4300000-0xf7ffffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0x0-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xc3fff has been reserved
    system 00:00: iomem range 0xc4000-0xc7fff has been reserved
    system 00:00: iomem range 0xc8000-0xcbfff has been reserved
    system 00:00: iomem range 0xcc000-0xcffff has been reserved
    system 00:00: iomem range 0xd0000-0xd3fff has been reserved
    system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    system 00:00: iomem range 0xec000-0xeffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
    system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x107f has been reserved
    system 00:02: ioport range 0x1180-0x11ff has been reserved
    system 00:02: ioport range 0x800-0x80f has been reserved
    system 00:02: ioport range 0x15e0-0x15ef has been reserved
    system 00:02: ioport range 0x1600-0x167f has been reserved
    system 00:02: ioport range 0x1680-0x169f has been reserved
    system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
    system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcff00000-0xcfffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: disabled
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.1: IO window: 0x3000-0x3fff
    pci 0000:00:1c.1: MEM window: 0xf4200000-0xf42fffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.3: IO window: 0x4000-0x4fff
    pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
    pci 0000:00:1c.4: IO window: 0x5000-0x5fff
    pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
    pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
    pci 0000:15:00.0: IO window: 0x006000-0x0060ff
    pci 0000:15:00.0: IO window: 0x006400-0x0064ff
    pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
    pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
    pci 0000:00:1e.0: IO window: 0x6000-0x9fff
    pci 0000:00:1e.0: MEM window: 0xf4300000-0xf7ffffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:03: resource 1 mem: [0xf4200000-0xf42fffff]
    pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff]
    pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff]
    pci_bus 0000:15: resource 0 io: [0x6000-0x9fff]
    pci_bus 0000:15: resource 1 mem: [0xf4300000-0xf7ffffff]
    pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:15: resource 3 io: [0x00-0xffff]
    pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:16: resource 0 io: [0x6000-0x60ff]
    pci_bus 0000:16: resource 1 io: [0x6400-0x64ff]
    pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff]
    pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 660k freed
    Simple Boot Flag at 0x35 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1257365076.373:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15825
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.3: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20004100000, using 3072k, total 16384k
    vesafb: mode is 1024x768x16, linelength=2048, pages=9
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 29
    ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 29
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: ATA-7: SAMSUNG MMCQE28G8MUP-0VA, VAM08L1Q, max UDMA/100
    ata1.00: 250069680 sectors, multi 16: LBA48
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    ata1.00: configured for UDMA/100
    ata1: EH complete
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCQE28G VAM0 PQ: 0 ANSI: 5
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
    ata2.00: ACPI cmd e3/00:79:00:00:00:a0 succeeded
    ata2.00: ACPI cmd e3/00:01:00:00:00:a0 succeeded
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 250069680 512-byte hardware sectors: (128 GB/119 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs: barriers enabled
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda6 with ordered data mode
    kjournald2 starting: pid 601, dev sda6:8, commit interval 5 seconds
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 141
    heci: module is from the staging directory, the quality is unknown, you have been warned.
    heci: Intel(R) Management Engine Interface - version 5.0.0.31
    heci: Copyright (c) 2003 - 2008 Intel Corporation.
    heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    heci 0000:00:03.0: setting latency timer to 64
    heci: link layer has been established.
    ACPI: SSDT 00000000bfad6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: AC Adapter [AC] (off-line)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    ACPI: SSDT 00000000bfad5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    ACPI: SSDT 00000000bfad5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SLPB]
    e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
    e1000e: Copyright (c) 1999-2008 Intel Corporation.
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    ACPI: WMI: Mapper loaded
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    heci driver initialization successful.
    e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    e1000e 0000:00:19.0: setting latency timer to 64
    e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6f:cf:41
    0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff
    ACPI: Battery Slot [BAT0] (battery present)
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'TKIP'
    ieee80211_crypt: registered algorithm 'CCMP'
    ieee80211_crypt: registered algorithm 'WEP'
    Linux kernel driver for RTL8192 based WLAN cards
    Copyright (c) 2007-2008, Realsil Wlan
    rtl819xSE 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    rtl819xSE 0000:03:00.0: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (46 C)
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [THM1] (50 C)
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
    ===============>NIC 8192SE
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    acpi device:0a: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/device:09/input/input6
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    Monitor-Mwait will be used to enter C-3 state
    ricoh-mmc: Ricoh MMC Controller disabling driver
    ricoh-mmc: Copyright(c) Philip Langdale
    ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
    ricoh-mmc: Controller is now disabled.
    Dot11d_Init()
    IRQ 17<6>Non-volatile memory driver v1.3
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7UET66WW (2.16 ), EC 7VHT12WW-1.01
    thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    input: ThinkPad Extra Buttons as /devices/virtual/input/input7
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input8
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
    input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input11
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
    yenta_cardbus 0000:15:00.0: Socket status: 30000006
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x9fff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4300000 - 0xf7ffffff
    yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
    ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4301000-f43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
    sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
    sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usb 1-6: new high speed USB device using ehci_hcd and address 3
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
    Clocksource tsc unstable (delta = -250245903 ns)
    usb 1-6: configuration #1 chosen from 1 choice
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
    input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input13
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    EXT4 FS on sda6, internal journal on sda6:8
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1750, dev sda2:8, commit interval 5 seconds
    EXT4 FS on sda2, internal journal on sda2:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda2 with ordered data mode
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1751, dev sda7:8, commit interval 5 seconds
    EXT4 FS on sda7, internal journal on sda7:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda7 with ordered data mode
    Adding 498920k swap on /dev/sda5. Priority:-1 extents:1 across:498920k SS
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a43e1e7]
    scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    sd 4:0:0:0: [sdb] 15753216 512-byte hardware sectors: (8.06 GB/7.51 GiB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    rtl819xSE 0000:03:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    ===>ieee80211_start_scan_rsl()
    ====================>haha:IPSEnter()
    =========>NicIFDisableNIC()
    PHY_SetRtl8192seRfHalt save BB/RF
    ===========>NicIFEnableNIC()
    gen_RefreshLedState first init
    =================> NIC version : C-cut
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
    Linking with Scytale,channel:6, qos:1, myHT:1, networkHT:0, mode:4 cur_net.flags:0x40a
    ===>ieee80211_associate_procedure_wq(), chan:6
    ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    =================>ieee80211_authentication_req():auth->algorithm is 0
    ===>rtl8192_SetWirelessMode(), wireless_mode:0x4, support_mode:0x16
    <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    #################ieee80211_sta_send_associnfo(), assocreq_ies_len:81,assocresp_ies_len:105
    ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c, <6>Associated successfully
    ============>normal associate
    Using G rates:108
    Successfully associated, ht not enabled(0, 0)
    ===========rtl8192se_update_ratr_table: ff5
    ===>set to B/G mode
    ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:1c:0e:41:2b:e1
    ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    wlan0: no IPv6 routers present
    rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
    LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
    When I pass iommu=off, it slows to unusable but does not cause a kernel panic.
    Last edited by sharpie (2009-11-05 03:32:39)

  • Yoga 13: the Realtek RTL8723A new driver not yet working properly

    After having faced lots of stability issues with my bluetooth mouse (Microsoft Sculpt Touch) I installed the new driver for the wifi/bluetooth chip RTL8723A (v1.04.0213 - 6th June 2013) and after having used it for several weeks, I have noted the following:
    Bluetooth issue:
    - Still several disconnection of my mouse (but slighty less than before)
    - There is a general trend that my mouse connection is worser everyday (used to work better) - and not a problem of batteries
    Wifi issue:
    - If I activate the "plane mode" from windows 8 wifi bar, it's impossible to reactivate the wifi! I have to run the windows'internal utility to sort out the problem (right clic on the wifi bar from the desktop and "resolve problems")
    - Sometime the wifi just doesn't connect properly (its connected on the router but there is no network) and I have to turn on the plane mode and do what I wrote above to make the wifi work again. But some time it doesn't work and I have to reboot
    - Despite the "wifi hotspot mode" is implemented (the "netsh wlan start hostednetwork" command) and work it's so instable that it always end in crashing the computer and followed by a reboot (perfectly managed by Windows 8 at least). Anyway I managed to cope with that during my holidays (I used it to create another wifi network which was a network share of another wifi network to which I could only log in for one device (my Yoga 13) - so I used my "hostednetwork" to connect iDevices at the same time). But after several crashes and reboot, the wifi was so instable that I had to reinstal the driver
    I have never faced so much bugs in a so basic but vital component of a laptop which is the network card. This card is already far beyond what we could expect of a laptop of this range (the wifi n is single band, no 300 nor 450 mbits speed! It's worse than any modern smartphone!) and has not a good sensitivity but in top the driver seems to have been written by beginners.
    So Lenovo, please, do something and pressurise your provider (Realtek) so as they release a driver working correctly - or just don't use their cards and invest in better providers (like Intel which is doing great network cards with professional class software). 

    Sorry to hear about all your wifi issues.  Unfortunately a lot of Yoga 13 owners are having problems, especially due to Realtek compatibility with specific router hardware.  Just to see if things improve you might try some of the other driver versions discussed here:
    The "Beta" wifi driver from diecast17 is a little older than the official June 6th driver but first improved wireless for many users: http://forum.notebookreview.com/ideapad-essential/640537-ideapad-yoga-109.html#post9180970
    There is a slightly newer Bluetooth driver for another Lenovo product that also works for the Yoga 13 (per this forum thread, installs version 05/22/2013-1.3.744.3 vs. 09/06/2012-1.3.644.3): http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034706

  • Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5

    On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
    On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
    Apple Support Communities
    Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
    created by The hatter in Boot Camp - View the full discussion
    This solved my question 
    This helped me
    you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
    This solved my question 
    This helped me
    Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
    Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    © 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit 
    I writ again my problem  
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74) 
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan 
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
    please help us by address site please please .....
    <Edited by Host>

    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
    I writ again my problem 
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74)
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

  • Photoshop CC won't open or create files in Windows 8.1 Pro

    When I open up Photoshop CC 2014, the program won't open or create files... it just sits there. No error message of any sort. This happens when opening from within the program and from opening through windows. I installed CC as soon as I installed Windows on this computer.
    Here's other pertinent information:
    Operating System
      Windows 8.1 Pro 64-bit
    CPU
      Intel Xeon E3 1231 v3 @ 3.40GHz 87 °F
      Haswell-WS 22nm Technology
    RAM
      16.0GB Dual-Channel DDR3 @ 799MHz (10-10-10-27)
    Motherboard
      ASRock H97M Anniversary (CPUSocket) 85 °F
    Graphics
      HP S2031 (1600x900@60Hz)
      1023MB NVIDIA GeForce GTX 650 (PNY) 103 °F
    Storage
      931GB Crucial CT1000BX100SSD1 (SSD) 76 °F
    Optical Drives
      hp DVD A DH16AAL
    Audio
      Realtek High Definition Audio
    I've seen lots of other threads of this exact problem. Any help appreciated. Thank you so much!
    AC

    If CC 2014 starts can you use menu Help>System Info and post that info here.

  • PSE 8, No audio when creating a slide show

    I am unable to create a slide show with audio.  All other functions in the slide show function properly but unable to get the audio portion to play.  Receive error message "Unable to add audio file, the selected file cannot be played because your system does not have the required compressor/decompressor (CODEC) installed."  Checked and all the Vista CODEC's are  installed & functioning properly.  Checked and downloaded the latest CODEC from Realtek for the audio board.  No audio recognized within Organizer or from file folders.  Went to Adobe Tech. and got brushed off.  Any thoughts or ideas would be greatly appreciated.

    1.  I have Windows Media Player 11.  It plays my music files which are mostly .MP3  I am unable to locate the Adobe music files using Windows Explorer.  May be an indication that they didn't load when the program was installed.  I have uninstalled and re-installed PSE 8. from my disc's.
    2.  I Tunes is my primary player.
    3.  OS is Vista Home premium
    After running around in circles for several days I have tried the following:
    1.  I opened PRE8 and created a slide show and imported audio file from my music folder.  Played OK.  Slide show performed OK.  I did not locate the included music folder with program.
    <edited>
    3.  In PSE8 I searched with Windows Explorer and could not locate any audio music files.  The error message I receive is:
         "Unable to add the audio file (C:\Program Data\Adobe\Photoshop Elements\6.0\usic\A_Taste_Of_Sicily.mp3)  The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed."
    Note that it is searching in PSE6 for the file.  I missed that before.  I long ago uninstalled PSE6 and PSE 7 was installed in its place and since PSE8.
    Now I am suspicious that the music files never loaded with the install of PSE8 and it is searching for music files that no longer exist.  Not sure what is corrupted and not sure what else to try.  I think I will reload PSE7 and see if I can locate the included audio files and attempt to load a slide show with PSE7.

  • [SOLVED] How to create a wlan0 interface?

    Hello:
    I'm getting a lot of problem with my wireless card, as you can see in this post (unsolved).
    I installed the supposedly driver for my wireless card without result. Installed "WICD" -installed networkmanager, but never achieved to initialize the GUI- and just see my wired connections, not the wireless, mine or from others.
    I'm just wondering if the problem is that I do not have a "wlan0" interface in my "/etc/rc.conf". If that  is true, could I create one by myself? In the wiki there are many pages (wireless setup, beginners guide, etc) that makes some dispersion in the information and it is difficult to me to follow -and evaluate- That's why I'm asking for your support.
    My actual rc.conf -selected parts- is -notice that because WICD there are some "!", as the wiki suggested -:
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="dhcp"
    INTERFACES=(!eth0)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng dbus !network wicd netfs crond alsa hal sensors privoxy tor)
    ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:1E:33:FE:CA:04
    inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::21e:33ff:fefe:ca04/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1165 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:849947 (830.0 Kb) TX bytes:132884 (129.7 Kb)
    Interrupt:44 Base address:0xe000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:14 errors:0 dropped:0 overruns:0 frame:0
    TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
    iwconfig:
    lo no wireless extensions.
    eth0 no wireless extensions.
    Should I create a wlan0 interface? How?
    Thank you very much.
    PD: I also create a WPA profile in netcfg, following the wiki, but it is not working. I get:
    > Profile "mynetwork" does not exist (but I created it!!!)
    Last edited by gromlok (2010-10-16 03:13:59)

    [offTopic]
    I know this is not what you expect as a reply but anyway... I recently bought a very nice machine which is a Thinkpad x201i (the cheap version of the x201), great build quality, affordable price, perfect size and enough processing power. The problem is that it came with a realtek 8192se wireless card. It's everywhere on the internet: the driver sucks and it's only supplied by the vendor (so not in kernel tree, not even in staging). it costed me few bucks and 20 minutes of my time to replace it with an intel centrino advanced 6200N, I guess the Intel Centrino-N 1000 is even cheaper (saw it at less than USD15 on amazon). You'll get in-tree kernel drivers, injection support and all that fun stuff... I was happy to pay the extra money just thinking about the endless frustration I would have gotten with the realtek card. Not that compiling a driver makes me scared, but using a crappy driver is a pain.
    [/offTopic]
    Last edited by bangkok_manouel (2010-10-16 02:55:39)

  • Realtek NIC cannot attach in Solaris 10 with Intel D945GCPE motherboard

    Hope someone can help. I've seen references online to people having installed Solaris 10 on this board.
    I can't get the NIC to work on on Solaris 10. I downloaded the drivers from Realtek's site. Ran the install script which said the drivers were installed but failed to attach.
    prtconf doesn't show the drivers. I did a reconfigure reboot ( touch /reconfigure; reboot) and it didn't work so I get an error if I try and plumb the interface.
    I created a /etc/hostname.rtls0 file and updated /etc/inet/hosts and /etc/inet/netmasks though I don't think that means anything at this point.
    There's no setting to disable plug and play, just an acpi option to change from type 2 or 3 I believe.
    I tried setting the acpi boot env variable using
    eeprom acpi-user-options=0x2
    but that just made the hard drive unreadable.
    I tried setting pcplusmp:apic_forceload = -1 in /etc/system and that caused the system to hang.
    From looking around online I'm wondering if the realtek drivers are 32bit? Can anyone confirm this?
    If true, that might be causing the problems with the driver install since Solaris is installed as 64bit.
    I'm going to try and build the drivers myself from the sources I found at http://homepage2.nifty.com/mrym3/taiyodo/eng/. Hopefully that's the only problem.
    If anyone has any experience with this board please let me know.
    Also, when Solaris hangs when booting up, CTRL-ALT-DEL doesn't reboot the system. I'm connected via IPKVM and can't do a hard reboot. Is there any other way to reboot the system when it hangs? CTRL-C don't do anything either.

    Darren_Dunham wrote:
    Do you see the driver files? Often something like '/kernel/drv/xxx'. 32bit drivers will be in drv/xxx, 64bit drivers will be in drv/amd64/xxx.
    If there's no corresponding driver in the amd64 directory, it's not 64 bit. But since you're getting messages from the driver at all, I doubt that's the issue.
    Darren, thanks for responding.
    I haven't been able to reboot yet to check. I'm just going by another forum posting I read that said the Realtek drivers were 32bit. Stupid question, but amd64 is just an old convention from when Sun first started x86-64 servers with Opterons, and all 64 bit drivers go in that directory even if the underlying processor is Intel right?
    This tech note http://access1.sun.com/technotes/01146.html led me to believe it was the 32bit driver on 64bit OS that was the problem since the install script claimed to install everything fine and I remember checking at least the /kernel/drv directory. At the time, I didn't think to check adm64, actually, I didn't even notice it installed in 64bit mode.
    Darren_Dunham wrote:
    Ouch. You might be able to boot the kernel debugger and force it to reboot. I haven't done that on an x86 system, but here are some instructions:
    http://www.sun.drydog.com/faq/7.html
    So <F1>-<A> should give you a key to pull up the debugger and reboot.
    DarrenAh, F1-A, that's the x86 equivalent to Stop-A. That link was very helpful, unfortunately F1-A does nothing. I'm stuck on "Use is subject to license terms" with a blinking underscore. I tried setting up a keyboard macro in the kvm client for F1-A too and that didn't work either. Looks like I need to add boot-file=kadb into /boot/solaris/bootenv.rc to enable the debugger. ctrl-break, shift-break, ctrl-shift-break, ctrl-\, ctrl-alt-break, ctrl-a, ctrl-q, ctrl-s, ctrl-] as well as slamming both hands repeatedly on the keyboard while screaming profanities also failed to reboot the system. The person I was working with at the data center left for the day, I need to see if I can find someone else to reboot this.
    One thing I read on that link you provided, it said using reboot -- -r is bad on x86 systems. Do you know if that might be what caused the problems and not the eeprom or /etc/system settings? When I get into failsafe mode, do I need to make any changes to /boot/solaris/bootenv.rc to undo the reboot -- -r command? I didn't get the errors the FAQ said I'd be getting if I used that option so I think everything might be ok.

  • Solaris 10 installation problems through IP-KVM and Realtek NIC drivers

    I'm on an IP-KVM connection to the server, the installation failed with the message:
    ERROR: Could not create the product file
    ERROR: Could not install all packages. Product installation failed
    mkdir: "/a/var/sadm/launcher": I/O error
    Could not install all packages. Product installation failed
    I tried a full install, I'm going to remove some of the unnecessary packages from the install list and try again. This media has been successfully used to install before so I'm hoping that would work. If anyone has any info though regarding the failure, please advice.
    One of the problems is that the IP-KVM doesn't allow me to power the server off and on. When the install fails in the desktop console mode like this, is there a way to send a command to reboot the server? Sending ctrl-alt-del through the kvm client doesn't do anything. In case this happens again I'd like to be able to reboot myself.
    I'm retrying the install in the console desktop mode so if it fails again I can probably open up a terminal window and issue the reboot command.
    Also, the install is not recognizing the Realtek nic. It's an onboard controller in an Intel motherboard. Has anyone had any luck/tips on getting the drivers from www.realtek.co.tw to work? I haven't gotten to that stage yet but any advice would be appreciated for when I do.
    Thanks

    I'm on an IP-KVM connection to the server, the installation failed with the message:
    ERROR: Could not create the product file
    ERROR: Could not install all packages. Product installation failed
    mkdir: "/a/var/sadm/launcher": I/O error
    Could not install all packages. Product installation failed
    I tried a full install, I'm going to remove some of the unnecessary packages from the install list and try again. This media has been successfully used to install before so I'm hoping that would work. If anyone has any info though regarding the failure, please advice.
    One of the problems is that the IP-KVM doesn't allow me to power the server off and on. When the install fails in the desktop console mode like this, is there a way to send a command to reboot the server? Sending ctrl-alt-del through the kvm client doesn't do anything. In case this happens again I'd like to be able to reboot myself.
    I'm retrying the install in the console desktop mode so if it fails again I can probably open up a terminal window and issue the reboot command.
    Also, the install is not recognizing the Realtek nic. It's an onboard controller in an Intel motherboard. Has anyone had any luck/tips on getting the drivers from www.realtek.co.tw to work? I haven't gotten to that stage yet but any advice would be appreciated for when I do.
    Thanks

  • Unable to create partition for solaris 10

    I have windows 7 installed in my vaio, and want to install solaris 10. I have 190 gb of space. Which I divided as
    1. 40 gb for windows
    2. 65 gb
    3. 65 gb
    4. 20 gb unallocated
    I want to install Solaris in unallocated space. when I try to install solaris 10. It shows only two partition 40 gb and 150 gb. I am new to Solaris.. please help.

    hello, you don't have to use hme0, that may not be your NIC type. your NIC appears to be realtek adapter. download the drivers first [try here: http://homepage2.nifty.com/mrym3/taiyodo/rf-1.0.9.tar.gz] install them, then your NIC will have a name like rt0. you can then proceed to set its interface.i hope ifconfig -a, blah,blah is ok with u. If the adapter is ok then you can now do the zones - they are just automatic no strugling!
    you can also find the drivers from realtek website at -- ftp://152.104.238.194/cn/nic/rtl8139abcd8130810xseries/rtls211.zip
    here are sample instructions on how to install the driver
    How to install Solaris/x86 version
    1. This is the version 2.1.1 RTL8139 serials driver for Solaris/x86
    version.
    2. It support Speed/Duplex-Force mode, you can set it through rtls.conf file.
    3. It supports 3 PCI-VID_DID cards, VID_10EC_DID_8139 for Realtek's
    native, VID_1113_DID_1211 for Accton and VID_1186_DID_1301 for
    D-Link in the install script.
    4. Install method:
    a. Power-off your PC and insert your RTL8139 adapter.
    b. Boot-up you Solaris/x86 and login as "root".
    c. Copy the "rtls211.zip" into the temporary location in your
    hard-driver.
    d. UNZIP the "rtls211.zip" and you will get 3 files, "rtls", "rtls.conf" and
    "Install".
    e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139
    or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the
    "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example,
    modify the "pci1186,1301" to "pciABCD,WXYZ".
    f. Run the "Install" from File Manager to install the driver, and
    it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
    g. You need to create the "/etc/hostname.rtls0" file and modify some
    other related files to make your networking environments working well.
    h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that
    Solaris will reboot and scan changed hardware environment.
    i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.
    success. bye

  • No sound; Asrock z68 extreme 4 with Core i5-2405S & Realtek ALC892

    Rebuilding a mythtv box; I've got my old drives back up and working, although mythtv is still giving me problems, but that's not this post.
    I cannot get any sound out of this box.  Above processor, board specs say onboard audio is the Realtek ALC892.  I have hooked this up through spdif to my amp, and via RCA connections to the amp, and am now hooked up via an audio plug to some headphones.  All I get on the headphones is some white noise.
    System is completely updated.  The digging I've done includes the following:
    ## aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ## lspci -v
    00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05)
    Subsystem: ASRock Incorporation Device 3892
    Flags: bus master, fast devsel, latency 0, IRQ 40
    Memory at fbc00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    ## head -n 1 /proc/asound/card1/codec*
    ==> /proc/asound/card1/codec#0 <==
    Codec: Realtek ALC892
    ==> /proc/asound/card1/codec#3 <==
    Codec: Intel CougarPoint HDMI
    ##cat /proc/asound/cards
    1 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xfbc00000 irq 40
    ## lsmod |grep snd
    snd_hda_codec_hdmi 20068 1
    snd_hda_codec_realtek 222220 1
    snd_hda_intel 19101 0
    snd_hda_codec 66954 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4942 1 snd_hda_codec
    snd_pcm 60079 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
    snd_timer 15374 1 snd_pcm
    snd 43561 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 4986 1 snd
    snd_page_alloc 5837 2 snd_hda_intel,snd_pcm
    For whatever reason, there is no card0, so alsamixer must be run as alsamixer -c 1; everything except the mics are unmuted.  There are 5 s/pdif entries.
    Before I got the new motherboard I had an nvidia video card and an asus xonar for sound.  I'm now working on using the Intel graphics off the cpu.  I did try reinstalling the xonar, and could get no sound out of it either.  It showed up as card0.  I've gone through the system and have deleted any remnants of old sound card entries; /home/user/.asoundrc, /etc/modules.conf; I think that's all I found.
    ## /etc/rc.d/alsa force-restart
    :: Trying to TERM or KILL processes that are blocking ALSA... [BUSY]
    Cannot stat /dev/snd/by-path:: Bad address
    Cannot stat pci-0000:00:1b.0: Bad address
    Cannot stat /dev/snd/by-path:: Bad address
    Cannot stat pci-0000:00:1b.0: Bad address
    [DONE]
    :: Saving ALSA Levels [DONE]
    :: Restoring ALSA Levels [DONE]
    ## ls -la /dev/snd
    total 0
    drwxr-xr-x 3 root root 280 Oct 16 03:23 .
    drwxr-xr-x 16 root root 5660 Oct 16 03:23 ..
    drwxr-xr-x 2 root root 60 Oct 16 03:23 by-path
    crw-rw---- 1 root audio 116, 10 Oct 16 03:23 controlC1
    crw-rw---- 1 root audio 116, 9 Oct 16 03:23 hwC1D0
    crw-rw---- 1 root audio 116, 8 Oct 16 03:23 hwC1D3
    crw-rw---- 1 root audio 116, 7 Oct 16 03:23 pcmC1D0c
    crw-rw---- 1 root audio 116, 6 Oct 16 03:23 pcmC1D0p
    crw-rw---- 1 root audio 116, 5 Oct 16 03:23 pcmC1D1p
    crw-rw---- 1 root audio 116, 4 Oct 16 03:23 pcmC1D3p
    crw-rw---- 1 root audio 116, 3 Oct 16 03:23 pcmC1D7p
    crw-rw---- 1 root audio 116, 2 Oct 16 03:23 pcmC1D8p
    crw-rw---- 1 root audio 116, 1 Oct 16 03:23 seq
    crw-rw---- 1 root audio 116, 33 Oct 16 03:23 timer
    ## fuser -fv /dev/snd/* /dev/dsp*
    Cannot stat /dev/dsp*: Bad address
    ## fuser -fv /dev/snd/* returns nothing
    alsa-info.sh returns this URL: http://www.alsa-project.org/db/?f=09f3e … 1773396c01
    I've found some suggestions to put a line in various files under /etc/modules.d with the intel driver and a model number, but haven't found a model number to put in, or a clear idea of what the file there should be named.  I did try creating /etc/modprobe.d/alsa.conf containing the line
    options snd slots=snd-hda-intel
    but I don't see where it changed anything.
    [Edit]Tried installing oss to see if I could get it to work under that; didn't have any quick luck so I went back to alsa, uninstalled oss; now I have no sound card at all.  I can't find snd-hda-intel anywhere on the system.  Digging deeper, I found that oss had hosed parts of the system, had to do a pacman -S linux, let it run through, and now I have my modules back.  The onboard sound now shows up as card0, as well.
    Last edited by timm (2011-10-18 17:04:41)

    Take a look through https://wiki.archlinux.org/index.php/Ad … chitecture. I actually initially tried to get pulseaudio to work on my machine and eventually gave up. After I removed all traces, it was relatively straightforward to get sound working with alsa (except the microphone is unusable but I'm not sure that's alsa's fault).
    EDIT: I suspect from something I read the other day that using alsamixer to unmute is ineffective if you are using pulseaudio and that you need to use the corresponding tool. But I haven't investigated this further.
    Last edited by cfr (2013-10-02 22:51:48)

  • GT80 Titan 094 - Realtek HD Audio Manager

    On the Speakers -> Speaker Configuration tab the Speaker Configuration drop-down only lists stereo as an option yet in various online forums and tutorials I see options for Dolby 5.1, THX 7.1 and other theater level surround sound choices.
    The stereo option appears even when I have four external speakers and subwoofer connected.
    Is there a driver update or something else I need to upgrade in order to have support for these other sound options?

    Hi rpisarzjr,
    My GT80 2QE (Titan-001) is the same and this is perfectly normal. I think part of the problem you're having is the unclear labeling of the tabs in the Realtek HD Audio Manager.
    The Realtek DSP (digital signal processor) in our Titans has two audio "outputs": (1) analog and (2) digital. Each one appears as an output "device". The analog output is labeled "Speakers" and feeds the stereo headphone jack and the built-in speakers. The built-in speakers are only stereo, too, even though they have five drivers (two full-range transducers per each of the two stereo channels and one subwoofer that is shared by both stereo channels).
    Some notebooks include analog surround sound outputs and therefore have Dolby Digital and/or DTS controls in their Audio Manager software. But it is rare and our GT80 Titans do not. The tab labeled "Speakers" is the analog tab. Since the Titan does not include analog outputs for surround sound, you will not see any surround sound options under the "Speakers" tab.
    The only way to get true surround sound out of the Realtek DSP in the Titan is via its digital output. It uses an S/PDIF optical jack which must be connected via Toslink optical cable to a complimentary digital input to an external DSP. This could be a home theatre receiver, HDTV with built-in surround sound decoding, or a high-end computer speaker system with its own DSP.
    When you use the Realtek DSP's digital output for Dolby Digital or DTS surround sound, the Realtek DSP serves only as a "pass-through" device to send the unprocessed digital surround sound signal out the S/PDIF connector. That's why you must have an external DSP to decode it to the analog audio that your external speakers will need.
    It is not normal to find any digital surround sound controls in the Realtek HD Audio Manager software unless Dolby Digital Live has been activated. The Realtek DSP in our Titans is capable of generating a Dolby Digital Live signal from a non-surround stereo source but MSI apparently didn't license the technology and did not provide the controls for it in the Realtek HD Audio Manager. However, if you search the internet, you will find some hacks that enable you to activate it, yourself. Just remember: The only way you'll hear any digital surround sound is with the digital output using an external DSP that can decode the Dolby Digital (or DTS) signal. None of this will benefit the analog ("Speakers") output because it is hardwired only for stereo operation. Plus, the built-in amplifier in our Titans has only two channels and only does stereo.
    Don't confuse "fake" surround sound for the real deal. For example, MSI's new Nahimic software will create a "fake" surround sound effect which you can hear over stereo speakers or headphones. It messes with the phasing of the two-channel audio signal to trick your ears into thinking the sound stage is quasi-surround. But these are just gimmicks which add distortion and are worthless in my opinion.
    Unfortunately, this stuff is way more complicated than it needs to be.
    Our Titans also have digital audio outputs as a part of their HDMI and mDP ports. These are the video outputs from our NVidia GPUs. If you total all of the built-in audio outputs in our Titans, we have five. One digital audio output each for the three video outputs, one digital audio output for the Realtek DSP, and one analog ("Speakers") output from the Realtek DSP which feeds both the headphone jack and the internal speakers. Each of the four digital outputs can pass a full 5.1 or 7.1 surround sound signal.
    Finally, the digital audio is usually controlled in the application where the audio originates---not with the Realtek HD Audio Manager. For example, when I play a blu-ray movie, the surround sound audio controls are in my Cyberlink PowerDVD software. The Dolby Digital or DTS selection is made there along with the speaker configuration.
    Kind regards, David

Maybe you are looking for