Realtime effects become jerky after being rendered for 24p HD video

Hello,
Any one comes across that for 24p HD Video clips, e.g. just adding a "cross-dissolve" as the transition between two clips (I have tried both uncompressed and ProRes 422 HQ). Before rendering, the realtime effects (green in color) plays perfectly across. However, after render realtime or render all, we find that there will be once that the video becomes jerkly about at the "out" point of the "cross-dissolve". The same result to the video recorded when "print-to-video" or "edit-to-tape".
The only work-around is to either export the whole sequence to a quicktime movie, OR adding a dummy "Quicktime" effect filter into the both video clips and render all effects. Both methods are very time consuming, as it is video footage
Also, this problem seems happen to 24p only, not 50i or 60i. I wonder there is any error in calculating and making the render file of the effect for 24p.
Software configuration:
10.4.10, Final Cut Pro 6.0.1, Quicktime (most updated), KONA3 driver 4.0 (actually this problem happens to BMD MultiBridge/DeckLink Systems too)
Is it a "known" bug in FCP? or anyone get similar problem but have a solution to it?
Thanks.
Regards,
Golden

Hmmm....odd. I only saw this with P2 footage that was imported with FCP 5.0.4 and used in projects since upgraded to FCP 5.1. That little jitter at the end. I had that. I had to reimport all my footage under FCP 5.1.1 and it went away.
But that is NOT what you are dealing with...same issue, different footage, different version of FCP.
Got me.

Similar Messages

  • Macbook Air 11" (Mid 2013) takes time to become active after being inactive for a while

    I've got Macbook Air 11" (Mid 2013). But it has an issue of taking up some time to be active after it has been inactive for a while (like when i dont use it for a while the macbook autosleeps and then when i want to work on it and try to get it active the screen only shows mouse pointer in a black screen and then the other components like the small window where you enter password and other takes time to appear...)
    plz help...I've been facing this problem for 2 weeks now...and wanna fix it as soon as possible....plz help...

        Hope this helps.
        http://support.apple.com/kb/PH13976
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Best.

  • Premiere Pro CS6: why is the crop effect altered after being rendered?

    So here's what's happening...
    I'm editing a project for work and I'm supposed to apply a widescreen (2.35:1) ratio to the main video; however, when I use the crop effect everything looks correct in my browser window. After being rendered the crop effect has been altered and no longer appears the same.

    The Adobe forum for Premiere is found here:
    http://forums.adobe.com/community/premiere
    good luck,
    x

  • SQL Developer hangs for a few minutes after being idle for a while.

    Is anyone aware of any issues with SQL Developer hanging for several minutes after being idle for several hours? After being idle for several hours (and probably minimized), when we bring up SQL Developer we just get a blank white window for several minutes before it becomes functional. Obviously, this isn't a critical issue, but sure is annoying when you run into it.
    Thanks in advance!!
    Rob

    This is fairly typical java application behaviour. For whatever reason, they are particularly prone to being swapped out by the operating system and take time to swap back in.
    There is an add-in around called "keepresident" which helps this but I thought it had been superceded in later JDK version.

  • Vertical pictures become horizontal after being imported

    I imported pictures directly from my picture folder. I need the vertical pictures to stay vertical, but many of them, not all of them, become horizontal after being imported into iMovie 06. How do I correct this?
    Thanks for your help.

    Thanks for responding. Do you know how to correct this problem so that vertical images stay vertical?

  • Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

    So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
    Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

    Thank you for the tips!
    OGELTHORPE wrote:
    I would check to see if the WD HDD has its own Sudden Motion Sensor.  If so, it may be coming in conflict with the one in the Mac.  If that is the case, I suggest disabling the SMS in the Mac.
    WD5000BEVT does indeed have it's own protection:
    ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
    Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
    Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
    Melophage wrote:
    this could be indicative of a faulty internal SATA cable. /.../
    Reteep,
    you could try the same thing as well.
    In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

  • Images burn into the screen after being there for only a few minutes?

    What's wrong with my mac if images burn into the screen after being there for only a few minutes?
    I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

    Hi,
    Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
    We can also boot into clean boot mode, test the issue.
    http://support.microsoft.com/KB/929135
    Run a virus scan to eliminate some malware\virus
    Similiar issue
    https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral 
    Yolanda Zhu
    TechNet Community Support

  • HT1212 i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years

    i don't have the computer that my iPod was registered to and i forgot my password because i just found my phone after being lost for 2 years. Idk what to do so i can access my ipod.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How do i force a guest account to Auto log off after being inactive for a period of time?

    I have a 2010 21" iMac running OS X Snow Leopard (10.6.8) in a hotel's guest lounge. I want to have it log off of the guest account after being inactive for 5 mins so that it clears the session info if the last person who used it did not log off when they were done (***this happens very often***).
    I tried using the "System Preferences > Security> Log off when inactive for X minutes" option but this brings up the "Delete files and log off" dialogue which unless someone makes a selection just stays there and doesn't timeout, essentially stopping the logoff process.
    How can i bypass that dialogue and force the system to log off the Guest User to avoid any issues with other guest seeing info from the previous user?

    Hi daniel,
    I don't believe it's possible to do what you want, unless someone could write an Applescript for it. I suspect the best route for now is the old fashioned way, paper and marker, warning guests to log off or their info will be public.

  • My screen is really faded, after it shut down (overheated I think) after being on for about an hour.

    My screen is really faded, after it shut down (overheated I think) after being on for about an hour.  Its kind of like how you see the world, when you get out of a pool that has too much chlorine.
    I have tried shutting down, and re-starting. I have re-calibrated.
    I have tried changing brightness.
    Nothing works so far.
    HELP

    Wait a few hours before restarting it, also post actual temps.  You can download iStatPro for free, once you have restarted, download it and post the actual temps.
    Also try resettng the PRAM and SMC, do each multiple times. If you don't know how please click Intel iMac SMC and PRAM resets

  • Slatebook 14 at 96% after being off for a night.

    Hi once again:
    I just recieved my Slatebook 14 two days ago.
    Runs like a top and I LOVE IT!!!
    But I have one question.
    As I asked in my subject line, Is it normal for it to be at 96-98% after being shutoff for a night?
    It does go to a FULL CHARGE after being on for 10 or 15 minutes.
    I had one ither tablet that did something like this, And I was just wanting to make sure it was normal for this one as well.
    Thanks in advance. Ricky
    This question was solved.
    View Solution.

    I have been doing it as in the first one.
    Holding down until it says Power Off and then Selecting the Power Off option.
    If that is what you mean by the First Option?
    I know that it has to be shutting off at least from the Factory, Or the battery would've been completely drained when I took it out of the box, At that time it was at like 80%
    But I know that is normal when first coming out of the box.
    Now I just thought of something.
    I have shut it off with it still plugged into the Power Pack although it's not getting power through an outlet at the time because I have it on a cart.
    Could this be it?

  • All applications close after being open for 1 minute.

    Recently, all applications I open on my Mac close after being open for 1 minute.  Safari and Microsoft word do not stay open for longer than 30 seconds.  Prior to this, my computer would freeze and eventually applications would close. I'm not sure why this is happening or how to fix it. Does anyone know what could of happen for everything to close after opening it? Any help would be great, thanks!

    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

  • Why does Firefox close after being opened for too long with no activity?

    I need to leave an image loop playing on my computer continuously but the internet browser seems to time out after being opened for more than 14 hours. Is there a way to keep my internet browser opened with out activity for as long as I choose?

    This is not a cure but will make it easier if Firefox locks up.
    '''https://support.mozilla.org/questions/997866''' {web link}
    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings. It was suppose
    to have been fixed in v30.
    Press the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.

  • Iphone 5 won't charge after being dead for three days.

    Iphone 5 won't charge after being dead for three days due to power cable breaking. I got a new cable and it still will not charge. Is my phone broken in any way? What can I do to fix this?

    Hey TalkBack12,
    These are the recommended troubleshooting steps I found for when your battery does not charge:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    via: iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Since you got a new cable, I would concentrate on trying a cable other than the new one.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

Maybe you are looking for