Reapply request of client import

Hello all,
  I have this question, Is it possible to apply again request transport files (scc8) to another client in the same system?...

hi,
client copy is possible in the same system.but client import is not possible in the same system client to client.
once at a time client import is not possible first import client into another system after  that system to import the default system.
i hope it is useful to you.
regards,
reddy

Similar Messages

  • Transport request trying to import itself into non existing client.

    Hi,
    We are trying to import  one transport request ( Source client of transport request 101 )  but it trying to import itself into the client 135. This 135 client has been deleted long time back.
    I checked , there are no references in transport configuration to this client.
    Error we got during import:-client 135 does not exist. Choose another client.
    Can someone pl. let me know what could be the reason.
    Best Regards,
    Tushar.

    Hi Markus,
    We did not give target client while importing. We left it blank. But source client of transport request  is 001. But in log
    600 ( default login client )------> selection for import
    135                                 -
    > Selection for Import.
    600 is ok but why this 135 is selected for import. That is the problem.
    Best Regards,
    Tushar.

  • Step by step process of client import

    hi Experts
      this is swathi, here i performed client export/import process(transport domain is same for both system)
    client export over with warnings and i need for client import
    below are my steps(performed) :
    after client import, i copied those co-files and data files in to target system then
    excuting t-code -stms_import in target system and checked in queue
    then i didn't find my transport request in target file (stms_import)so i added my transport request in Extras>other requests>add
    then it shows error description:
    (transport control program tp ended with error code 0212)
    ERROR:could not access file as supposed(see dev_tp or s)
    what happened i dont know so please i need some help at this stage ,what can i do next

    hi gagan deep,
                   i checked in target system tp system log
    it shows
    ERROR:/usr/sap/trans/cofiles/ST00003.CLL:cant open
    :permission denied
    now my question is
    i copied cofiles and data files into target system this step is correct? if correct
    i added in extras>others req->add ........this my steps is correct  or any mistakes are their please reply me
    if correct means now iam going to give permissions for target systems all data/co-files
    (usr/sap/trans/cofiles/ST00003.CLL)
    can go

  • Error in client import

    hi Experts,
       here i need some help for my present issue
    about client import;
    i finished client export with warnings
    after i copied cofiles/data files from source to target system
    in my target system we have 3 clients 333,222,444
    i need to copy into 444
    so after copying files
    login into 444 client with sap*
    and execute t-code  stms_import and checked about my transport requests but not find
    so i try to add it in Extrasother reqadd
    but i get an error :
    description is :
    Transport control program tp ended with error code 0212
    Error:could not access file as supposed (see dev_tp or s)
    in tp out put it shows
    error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
    then i given 775 permission for all data/cofiles
    then again i tried to add request but result is same
    i don't understand what happen so please help in this issue

    login into 444 client with sap
    and execute t-code stms_import and checked about my transport requests but not find
    so i try to add it in Extrasother reqadd
    but i get an error :
    description is :
    Transport control program tp ended with error code 0212
    Error:could not access file as supposed (see dev_tp or s)
    in tp out put it shows
    error:/usr/sap/trans/cofiles/st0003.dev :cant open:permission denied
    Solution:Create a user with SAP_ALL and SAP_NEW profile and repeat the steps. SAP* cannot do/kick of any transport or creating of coflle and datafile.

  • Client import taking too much time

    hi all,
    i am importing a client , i it has complete copy table 19,803 of 19,803 but for last four hours its status is processing
    scc3
    Target Client           650
    Copy Type               Client Import Post-Proc
    Profile                 SAP_CUST
    Status                  Processing...
    User                    SAP*
    Start on                24.05.2009 / 15:08:03
    Last Entry on           24.05.2009 / 15:36:25
    Current Action:         Post Processing
    -  Last Exit Program    RGBCFL01
    Transport Requests
    - Client-Specific       PRDKT00004
    - Texts                 PRDKX00004
    Statistics for this Run
    - No. of Tables             19803 of     19803
    - Deleted Lines                 7
    - Copied Lines                  0
    sm50
    1 DIA 542           Running Yes             SAPLTHFB 650 SAP*     
    7 BGD 4172   Running Yes 11479  RGTBGD23 650 SAP* Sequential Read     D010INC
    sm66
    Server  No. Type PID Status  Reason Sem Start Error CPU Time   User Report   Action          Table
    prdsap_PRD_00  7  BTC 4172 Running   Yes    11711 SAP* RGTBGD23 Sequential Read D010INC
    plz guide me why it is taking too much time , while it has finished most of the things
    best regard
    Khan

    The import is in post processing. It digs through all the documents and adapts them to the new client. Most of the tables in the application area have a "MANDT" (= client) field which needs to be changed. Depending of the size of the client this can take a huge amount of time.
    You can try to improve the speed by updating the table statistics for table D010INC.
    Markus

  • Need to delete the SPAM requests from the import queue

    Dear all,
    There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the  STMS import queue which shows 4 old patches(witch were applied to the system before the refresh)  with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
    u201CThis is tp version 372.04.29 (release 700, unicode enabled)
    ERROR: Client 'ALL' is not possible.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0246
    standard output from tp and from tools called by tpu201D
    When I try to import a new support package it gives the  following error,
    Error in phase: CHECK_REQUIREMENTS
    Reason for error: QUEUE_NOT_EMPTY
    Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
    The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
    Thank you,
    Siju Sam

    Dear Ganesh,
    I have tried the steps you suggested, but still the import queue is not cleared.
    Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
    Number   Request      Clt   Owner          Short Text
         1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
         2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
         3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
         4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
    I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the  queue. So I just wanted to reset the status that These TPs are already applied.
    Thank you,
    Siju Sam

  • Client Import --  low disk space error

    Hi experts,
    i am using SQL server 2005 on wix 2003 64 bit.
    I was doing client copy using SCC8 from Prod to Dev Server, total size of request file is 5 GB, while Importing request thru STMS, import stopped due to low space for log file in Development server.
    Is there any way to stop the logs while importing a client . Suggest the way out.
    thanks in advance
    Akshit sharma

    akshit1986 wrote:
    > Is there any way to stop the logs while importing a client . Suggest the way out.
    You can put the database in 'SIMPLE' mode to stop logging during an heavy activity.
    If you want to 'continue' with the 'logging' then you need to take backup frequently to prevent low space for log file problem. Execute the transactional log backup with more frequency during the long and heavy activity.
    Read -
    http://yoshilounge.wordpress.com/2008/12/05/stop-the-transaction-log-of-a-sql-server-from-growing-unexpectedly/
    http://msmvps.com/blogs/vstsblog/archive/2009/08/09/stop-sql-server-transaction-log-ldf-files-from-growing-indefinitely.aspx
    Thanks

  • Transport request from client to client

    Dear Freinds
    Can we transfer the few requests from client to client.
    Those two clients are in one server. 012 and 011 clients.
    We did all settings in 011, already we moved to QTY and PRD from 011.
    Now i want to move few settings to 012 from 011.
    My Basis consultant is saying it is not possible from 011 to 012. We do not have the path for that.
    How to do this?
    With regards
    lakki

    If 2 clients are in the same server ,you can just move it using the tcode SCC1
    Go to SCC1
    Give the source client as say 011
    Give the transport number
    Click the Include request subtasks button
    If you want you can do a test run by clicking the test run button first. Then you can remove this click
    Now you can either click the Start immediately button or the Schedule as B.G. Job button
    Now the tasks in ur transport will be imported into the client 012
    You can check the entries now in 012
    Hope this helps you
    Pls reward if this helps you

  • How to schedule a client import ?

    hi
    i'm wondering if  "client import" can be scheduled ? so far i can schedule for client deletion, client export ... but don't see the option to schedule client import.
    my activities as below
    a.) perform SCC8 at the source client to export the client.
    b.) go to the target system to refersh STMS queue, the cofiles and data files will be copied to the target system STMS queue.
    c.) transport the queue to new target client
    d.) i wll be prompted to login to the new client, i will login as sap*
    e.) once i click the button "import", the import process will start without giving any option to perform scheduling.
    please advise other than SCC9 (remote client copy) is there other way of scheduling a client import.
    comment and advice will be appreciated.
    thanks.
    regards,
    Kent

    Hi
    I don't think that, there is any such option for client import through STMS.
    Check SAP note 70547 for detailed procedure.
    Rahul

  • Perform Client import/export SCC8 with different release component between server

    Dear All
    Isn't possible to perform Client import/export SCC8 with different release component between server.?
    Currently the condition of between two system as follows
    Source Server     : SAP ECC6.0, Component SAP_APPL, release 602 level 16
    Target Server     : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
    This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
    Thank You, your help is much appreciated.

    No..

  • MS Project Client import to cProjects

    Hi all,
    does anybody have experience with the MS Project Client import to cProjects with regard to resource management?
    In my MS P file, I've"specified the fields "resource names" which should convert to "project roles" in cPro and "code" which should convert to "resource" in cPro, as stated in different documents and notes (e.g. Note 958210)
    I've entered an existing BP ID in the field "code" but when importing it into cPro, the system can not find the RPM-BP according to this ID.
    Any ideas or proposals in this case?

    Hi Schien,
    Please check wheather Active X Controls are active in the browser.
    Make these settings in Customizing for Collaboration Projects under Connection to <i>External Systems &#8594; Microsoft Project Integration &#8594; Assign Fields for Export and Assign Fields for Import.</i>
    Regards
    Rehman

  • Requesting the client to present a certificate?

    Hi there, I'm currently trying to write a servlet, which would prompt the user to chose a certificate from their browser. Then based on the type of certificate (we have issued 2 different types of certificates, one a long time ago and one fairly recently), I would direct them to 2 different pages.
    Is this possible?
    Farhan

    Perfect, thanks! That answers the first part of my question. Now I'm wondering if what I'm trying to do is even possible.
    Basically, after requesting the client cert. (I'm guessing this is an SSL session), I want to redirect the browser to one of two sites. These other 2 sites are also SSL sessions and will also request the certificate. I'm guessing the user will have to choose his same cert twice. Is there anyway to avoid the 2nd cert request?
    Maybe by forwarding the cert to the 2nd server, and then redirecting the browser, or some other such trick?

  • How can I "reprompt" when a OBIEE request has been imported into powerpoint

    Hi All,
    How can I "reprompt" when a OBIEE request has been imported into powerpoint using the Oracle Bi plugin for microsfot powerpoint?
    When you import a request into powerpoint it show the prompts you have defined in yout request. How can the user "reprompt" the request in powerpoint?
    Best regards
    H.

    As Silkrooster said, should be easy enough with layer styles and blending modes. To mimic the curvature you can use a simple warp style as well. You may just need multiple duplicates of the layer for ultimate control...
    Mylenium

  • Dispatcher not started after client import

    hi all,
      here i imported one client  and the client import process is running but in that system we have other clients  my question is  users are unable to log in into that other clients
    so i checked into os leve (dpmon) and after i try to stopsap and its stoped and after it is not started the error message is shown as
    oscollector is already running,,   and
    trying to start sid database .....
    log file :/ /home / sidadm / startdb.log
    please what can i do for my server start

    hi srineevas elow are shown my usr/sap/sid/sys/exe/run/startdb
    #!/bin/sh
    @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ind/ind/startdbora#4 $
    NAME: startdb
    PURPOSE: startup an ORACLE database
    PARAMETER:
          none
    Environment
          ORACLE_HOME     must be set
          ORACLE_SID      must be set
    Return Codes:
          0       ok. DB may have already been running.
          1       erroneous license check
          2       DB not startable: inconsistency?
          3       environment check failed
          4       orasrv error / starting of listener error
          5       script was killed
    USAGE: startdb [ORACLE_HOME] [startRemoteService]
    DESCRIPTION:
    - initialize
    - start orasrv / now: lsnrctl start
    - check database state (connect)
    - startup database, change archivelog mode
      if this procedure is changed (e.g. Test System)
      there is no guarantee of hotline support if the system crashes
    - check database state (connect)
    - check archive log state
    - licence check
    DGUX and Sequent exceptions
    R3trans is not available on the DG standalone DB server
    therefore the Oracle processes are checked
    #History
    #2001-03-01     rv      replace SAPSYSTEMNAME with DB_SID where appropriate, due to SDMS
    #2000-11-14     rv      include begin/end messages from startsap
    #1996-07-25     kgd     SQLNETV2 and SQLNETV1
    #1996-07-11     ar      Sequent exceptions
    #1996-06-11     kgd     SQLNET*V2 adaptions
    #1994-12-7      mau     warning "Transport system not init." not only to
                          logfile but also to stdout
                          Project: 22C 241
    #1995-07-25     dg      included check that caller is admuser
    #====================================================================
    FUNCTION: check_db_running
    PURPOSE:  check wheather db is runnig without R3trans
    set returncode = 0  db available
        returncode != 0 db error
    check_db_running()
    in order to find out if the database is available
    check whether the Oracle processes are running or not
      echo "
    " >> $LOG
      echo `date` >> $LOG
      echo "check if Oracle processes are running" >> $LOG
      $PS | grep ora_[a-z][a-z][a-z][a-z]_${ORACLE_SID} > /dev/null 2>&1
      if test $? -eq 0
      then
        echo 'Database already running' >> $LOG
        returncode=0;
      else
        echo 'database not available' >> $LOG
    now check if sgadef exists
    if a database connect fails but sgadef exists,
    it is possible that there is a severe database problem
    otherwise continue with startup procedure
        if test  -f $ORACLE_HOME/dbs/sgadef$.dbf  -o \
                 -f $ORACLE_HOME/dbs/sgadef$.ora
        then
          echo "*** ERROR:Database possibly left running when system" >> $LOG
          echo "    went down(system crash?)." >> $LOG
          echo "    Notify Database Administrator." >> $LOG
          returncode=$error_dbnotavail
        else
          echo 'There are no Oracle processes running - ' >> $LOG
          echo 'Database is probably already stopped.' >> $LOG
          returncode=$error_dbnotavail
        fi
      fi

  • How to print SOAP request at client program when program calls web service.

    Hi friends,
    While calling a web service, I am getting following error: javax.xml.rpc.JAXRPCException: Failed to parse WSDL
    I believe it is due to an invalid parameter set for the request soap. I need to analysis this error. Can you help me to print SOAP request at client program when program calls web service.
    Is there any way to print SOAP request XML?
    Thanks.
    Jaykishan

    Is this question related to Oracle SOA suite? Which client are you using? Use SOAPUI to validate whether WSDL is correct.
    Regards,
    Anuj

Maybe you are looking for