Rear and center channels not working

I just got a Griffin Fire Wave for my iMac and it works great when playing DVDs and such. But when I'm mixing in STP2 I pan the surround to the rear and I don't hear anything, I did a test to see if it exported in 5.1 and it did, I could hear all channels. But its frustrating not being able to monitor the
Ls Rs and C channels. Any Ideas?

Its definedly the soundcard which makes the funny noise, I just tested the outputs with headphones. Its really funny thing that center channel works perfectly if rear channel plug is disconnected, but you plug the rear channel plug it mixes up with the center channel also.
I just want to be sure before I send it to supplier (warranty is still good), because if it works on their computer they will charge me for 50? for the checking.

Similar Messages

  • SB Audigy 2 ZS Platinum - Front/Center Channels Not Work

    I've tried everything I could think of, software and hardware wise - reinstalling/updating drivers, re-seating the card and cleaning the contacts, complete reformat/reinstall of windows, toggling every software setting that I could find, etc. Has anyone else had this problem? And if so is there a way to fix it, or do I just need to replace my soundcard? Thanks for any input.

    So, you're saying the surround L/R channels are working? I think we need to know what you're using for speakers. I would suggest swapping some of the cabling around and seeing what results you get from the speaker test. This will often give big clues as to whether the problem is in the speaker system, the soundcard, or the cables.
    -Dave
    [email protected]

  • Left rear channel not working - Xfi

    My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • Center Chanel Not Working: SB ZS 2 Gamer & Klipsch ProMedia

    Not sure which section is appropriate for this answer but it could fall under speakers or the soundcard
    I've read a few things on here about getting my center channel to work, but no luck. I have Audigy ZS gamer and for speakers I have Klipsch ProMedia 5.
    I've switched the sound panel in my control panel to 5., I've looked into the audio console as well in the EAX section s well as the CMSS 3D and still no luck. I've unplugged and replugged the wires as well. I know for a fact that it was working before I reinstalled Windows a few months back. I've done all the necessary driver updates as well. Any other changes or possible "buttons" somewhere?
    Thanks in advance for any help

    Does it work on the speaker test in the Creative software? If it does then try turning on CMSS.Message Edited by nvidiot on 08-27-2006 09:39 PM

  • Rear and Center speakers dont w

    I just recently rebooted my system and my Z-5300e speakers were working fine then after i install my SB Li've! 24 bit the rear speakers dont work (right rear goes to right front, left rear to left front) and the center channel doesnt work?(left and right speakers share it). I have done everything it says.. checked the plugs, reinstalled?all programs, enabled CMSS/EAX,?checked control panel?What might be the?problem here?Thanks?

    Biohazardx0,
    If you happen to have a logitech webcam with AEC function. Try disabling that.
    http://logitech-en-amr.custhelp.com/...hp?p_faqid=527
    Jason

  • 5.1 X-gamer and center channel of 5.1 speak

    Hello,
    first post may as well be a good one..
    Ive read the FAQ and tried the options listed. im working with a week old install so not much on the dri've other than world of warcraft and MS office. Im running windoze XP pro on a AMD Sempron 2500+(.75ghz) with gig of ram and a nvidia GEforce6800GT video card. I have had this sound card a while, like 5 or 6 years. Ive connected a brand new Logitech X-5530 sound system to my X-gamer 5. sound card. everything sounds awesome excpet the center channel. Ive connected the center channel to the main output jack and got sound, so i know the speaker is functioning. the sub and center channel share a line on the X-530 speaker wires and the sub is working. however i get no sound out of the center channel. I tested this with the Creative Audio HQ panel set on 5. speakers. all other channels i hear the "front right, front left" etc... but center channel is totally silent.
    any ideas?

    Hmm, first go through windows control panel - sound and Audio Devices. Ensure you card is selected in all setup menus.
    If "use only default devices is ticked, untick it.
    Try S/PDIF and see if that works.
    D/L this program - ?rightmark-3dsound-2.2 and run it just to tes things.

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

    I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
    I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
    I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
    This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
    My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
    Anyone got any ideas???? I'm stumped.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • HT203585 My FaceTime and iMessage will not work on my mac. How do i fix this?

    My facetime and iMessage will not work on my mac book. I put in my appleID and it says it is incorrect, but it is correct. How do i fix this?

    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support

  • My Ipod recently wheel and center button stopped working. Help?

    I was putting music on my ipod, I ejected it then when i went to unlock it it unlcoked but the center button and wheel will not work. Yes, I have restored again and agian. i have also let it completely die. I know the button is not broken because it will go to home im i hom edown the ceter button and the menu. Helpp pleaseeeeeeee !?

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you can't restore the iPod...
    Apple - Support - iPod - Service FAQ

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • IPhone home and lock buttons not working at all?

    I got my iPhone 4 in October 2010. Since then I have accidentally dropped it on the floor and the back cracked, and in April 2011 I accidentally dropped it in a tub of paint. A bit silly, I know, but I managed to get all of the paint off quite easily and it was fine. However, at the end of last year, the home button started to malfunction and get stuck and just generally not work. In the past few weeks I've noticed I get trouble with it at least once a day and have to sit and press it until it works. Then, today, just out of nowhere, the lock/power button at the top of my phone just stopped working, it's stuck. I don't really have a way to wake my phone now unless I press the home button until it works, and I can't lock it anymore. I don't know whether it would be anything to do with the paint, considering it happened a year ago.  Is there anything I can do to get it working again or do I need to take it to Apple?
    Thank you very much.

    Ok this Might work
    1- Try rubbing your home button with alchohol ( or perfume ) in a circular motion for about 20 seconds
    2 - do the same to ur power button ( from left to right and repeat ) for about the same duration
    3- press and hold both your power and home button at the same time ..
    ... If this doesnt work try it one more time
    If it doesnt respond after the second time i'm afraid u'll have to take it to an apple care center :(
    Wish u luck

  • Camera and flashlight does not work

    My camera and flashlight will not work after the ios 7 upgrade. I have rebootd and completely wiped out my iPhone and still no camera or flashlight. I have seen where others are having the same problem but no answers.

    I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
    I may have found a solution of course I probably won't get credit for thanks to Apple.
    I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
    After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

  • I have an older nano (4th gen?) and it will not shut off and when you try to skip through songs it skips itself back.  Buttons seem to be pushing themselves. I've tried doing a hard reset and it did not work.

    My older nano is not working.  I have to keep it plugged in all the time because it does not shut off.  The buttons only work sometimes and then they scroll and skip forward and backward by themselves.  I have checked updates and I have also reset it back to factory and it is not working.

    Hello mistymorrill
    If after all that you have tried and your iPod nano is still not working, the refer the page below for further options.
    Service Answer Center – iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

Maybe you are looking for