REAR CAMERA IMAGE VERY POOR AFTER 4.4.2 KITKAT UPGRADATION

HI LENOVO DEVELOPER TEAM,
IM USING S920 FROM FEB-14 AND THE CAMERA WAS WORKING VERY NICE BUT AFTER UPGRADING TO 4.4.2 KITKAT, IT IS WROST NOW. VERY DISAPOINTED TO SEE THE RESULT OF CAMERA. IT WAS SUPER FINE IN PREVIOUS VERSION. PLS. DO THE NEEDFUL TO RESOLVE THIS ISSUE. ALSO BATTERY IS GETTING DRAINED VERY QUICKLY. DON'T KNOW WHY BUT IT WAS NOT IN PREVIOUS 4.2 JELLYBEAN. MY PHONE HAS BECOME SLOW ALSO. PLS RESOLVE THE ISSUE AS SOON AS POSSIBLE.

Since Reset is not helping, Restore iPhone with iTunes on computer. If this does not fix problem, consider replacing camera or entire iPhone.

Similar Messages

My iPod camera is very blurry after dropping it. What do I do???

I dropped my iPod touch 5 and the camera became very blurry , and after a few seconds it freezes. What should I do???
iPod touch 5th gen, iOS 8.3, 32GB

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Rear camera will not focus after updating to 8.1.3. Any adviceY Already tried erasing and reinstalling.

I updated to 8.1.3 and my rear camera will not focus. I erased and reinstalled and still have the problem. Any advice?

Hello jonesrob,
Thanks for using Apple Support Communities.
From your post I see that your photos and video taken with the rear camera on your iPhone are not in focus after updating to iOS 8.1.3. When you restored your iPhone, did you restore from a backup? If so then I would like you to please restore to the factory settings by following the directions in the article below.
Use iTunes to restore your iOS device to factory settings - Apple Support
If you had already restored to the factory settings and the issue persists, then it's time to seek service for your iPhone.
iPhone Other Repair Options - Apple Support
Have a good one,
Alex H.

FaceTime Camera Images Look Poor on New Macbook Pro Retina Models

I received my new 2012 Macbook Pro Retina display model yesterday. When doing Facetime last night, others on the other end were commenting how poor the image coming from my end looked. Then I tried it on my iphone 4S and it was amazing how much better the picture of me looked on the phone versus the macbook. Today, I went to the Apple store to compare my new computer to the Retina display models on the display. Their camera images honestly didn't look much better than what I have on mine (but for example, the new Macbook Air's images look much more realistic). Why is this? How can the HD Facetime camera in the Macbook Pro produce less realistic images than the lower resolution iPhone 4S or Ipad cameras? Any help or insight you could share would be appreciated.
Thanks!
Jason

Thanks for the update, Jason.
Jason1975 wrote: ... There is definitely a difference between what was seen on the MacBook Pro Retina models on display and what the other sources I mentioned were displaying. Perhaps it has to do with the new display and software that isn't updated yet...
.... Unfortunately, the new laptop has the same issue...
Of course what is seen on Retina versus non-Retina display will be different. That is a different issue from the video quality your video contacts experience. However, the fact that you see the same problems at your home on a second new Mac means you will need to do some more extensive troubleshooting involving another trip to the Apple Store.
Rather than merely looking at displays of the live camera, I suggest you compare how the FaceTime video looks when received on your iPhone while in the Apple Store. If necessary, you should test your new Mac plus some of the Store models, too. Taking your new Mac & iPhone back the the Apple Store and connecting there will have the added benefit of eliminating possible internet connection issues at your location.
At the Store, you can compare how your new Mac's video transmissions (iChat, FaceTime, etc.) and video from some Store display cameras look on your iPhone as a receiving device. If all are "bad" on your iPhone, you can also compare video transmissions received on one of the Store's devices to be sure it sees the same video problem as your iPhone.
While connected via wi-fi in the Apple Store, if the FaceTime video transmissions from your new Retina MacBook Pro (RMBP) to your iPhone is lower quality from that of the Apple Store's RMBP FaceTime to your iPhone, it seems to me that the Geniuses should determine whether your new RMBP needs service or (highly unlikely) is a second "bad" Mac that should be exchanged for a RMBP that works properly. This time, test the fix BEFORE you take it home again.
If, every RMBP you test in the Apple Store looks worse than the video sent from all other devices, you are most likely correct that some software needs to be updated for video quality.
All this testing may take some time, so plan ahead. Perhaps you want to make a Genius appointment. However, although the Geniuses were unable to give a definitive answer other than swapping RMBPs during your last visit, they may have since found an official answer to your questions.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Rear camera doesn't focus after update iOS 7

Rear camera doesn't focus beyond a few inches since I did the iOS 7 (and 7.0.2) updates. Front camera still works.
Both iCamera and Camera+ are affected.
Have done phone reset.
Anyone?

I did a hard reset (press and hold the home button and the power button until the unit shut off) and when it came back on, the camera focus works again. Halle-freakin-lujah!

Iphone 4s performance very poor after iOS7 update

Hi Guys,
I just thought i'd post my experience on my iphone 4s...
First of all the phone is approx 18 months old.
The phone was perfect until I updated to the popular IOS7 update, cough!!!!
Heres what's happening...
iPhone probs since IOS7 update
First of all the phone never missed a beat until ios7 update. Please don't insult me apple and tell me that this is a coincidence.
-Batt perc poor accuracy readings, sticks on amount for long period until reset, thereafter reads incorrect again. Last week was reading 93% but was actually flat.
-Batt can read low, phone freezes, reboots on its own & batt will then read at a higher perc.
-Phone freezing and rebooting on its own intermittently, either has to be physically switched on (from black screen) or white apple appears & it switches itself on.
-Select msgs or email - white screen appears only.
-Have to reset phone on numerous occasions due to lack of or no response.
-After reset all messages, emails, notifications etc come in all at once
-Will get bulk messages, even from same people.
-Will not open messages or email at times, poss due to signal loss while phone shows still signal bars (States switch in wifi or network)
-Loss wifi all the time, doesn't work at all now. (oddly it worked again in the apple store which left me really baffled?)
-Search for email now poor
-App Store search poor, loading poor
-Alarm clock not working at times
-Switching off on its own
-No response from screen at times and accassional delays when it does work
-Battery drain excessive, even when not being used! I have switched any hidded consumers off
-Very jaggy/not smooth in operation at times
-Opening app, settings etc take too long. An app might 'blink' i.e. Flash off then back on.
-Wifi on at access screen but switched off in settings and therefore can not select on option
There could be a battery issue here but only since ios7 update has this all came into play. I used to really like the phone and enjoyed using it.
I was at the apple store yesterday and the guy showed me that my battery was borderline 79 -80% condition (orange).
He mentioned that there also may be software issues so I am now going to carry out a full retore from new,and post back during the week.
If a company from any technical background that deals with software, and hardware, and the the system or particular part of the network/system/hardware lays down, then you must stand by it.
I am due an update apple if you're listening, but if a battery is going to last only a year and a half or less then I very well may take my chances with another manufacturer. I just can't be bothered with hassle and the thought in my mind waiting on the phone battery failing at some time.
I understand the technology behind it all but maybe apple need to look at the consumption side of things more than the makng a stronger battery. Maybe consider a secondary system using small second battery or solar, with temperature regulation of some sort. Another approach would be to have a primary system (for calls, texts and maybe limited internet) and a secondary system (for apps etc etc) simply controlled by a type of switch/relay/regulator i.e. if the battery drops below 25% you will not get to use secondary systems keeping your phone usable in terms of making calls, which the mobile phone was intended, remember!!!!
I called my phone network company and they said they would cover the bill for a new battery as the guy in apple store suggested would fix the powering issues.
P.S. I emailed apple about this last week, got an auto response stating we'll get back to you in 24 hours, and guess what, they didn't.

I have a similar problem. I have an iPhone 4s that was working perfectly. Almost immediately upon upgrading to iOS7 I noticed that the battery began to drain much quicker. This morning when I tried to recharge the battery it would not recharge. I followed brad805's suggestions. When I took it to the Genius Bar they attempted to remove the battery and directly power the phone from a cable and that did not work. The phone is now completely dead and because it is past the one year warranty period, there is little that the people at the Apple Store can do to help me. I took very good care of the phone when I owned it and there were no incidents to the phone in the time since I upgraded to iOS7. I strongly believe that the upgrade to iOS7 is the contributing factor to this phone failure.
Is there a mechanism to register a complaint with Apple? I understand that phones fail from time to time but based on the posts I am seeing on the internet, I fear that there are additional instances like mine.

MBP Retina FaceTime HD Camera has very poor quality and artifacts.

Hey guys, the camera on my 2012 MBP 15' Retina has ridiculously poor quality. After recieving it I had got major artifacting while using the camera for skype, facetime and Google+. Usually the artifacting would continue (many multi-colored horizontal lines across the screen of the camera) until finally the bars would disappear maybe one or two bars would remain, regardless it was usable. I noticed, however, the quality was attrocious, but I assumed it was just how it was supposed to be (very surprised for a $2300 laptop). Recently my friend purchased the same laptop, after looking at his FaceTime HD camera, I realized mine was simply an attrocious fluke, my camera had ridiculous blurring and grain and awful light sensing. I am still under warranty until November 23rd, 2013. What are your opinions on how to get this resolved?
Here are some pictures:
Message was edited by: rpillai01 "Added pictures."

Call AppleCare which you should have done from day one.
After recieving it I had got major artifacting while using the camera
You had 14 days from the date of purchase to return your computer. No questions asked!

Camera resolution very poor since last update, is this going to be corrected. Worked good before update.

I have an Ipad 2, the camera took great pictures, until the update in Oct 2013, since then the pictures are so grainy, they look terrible. One of the features I loved about my iPad 2 was the camera feature, but the pictures are so terrible, It's not really worth having it. I tried resetting all my settings, but this did nothing to improve the problem. Is there anything I can do to improve the sharpness of the camera??? Are you coming up with a new update that will fix this problem???

The best advice I can offer for your iTunes problems is to try creating a new test user on your computer. Check to see if iTunes behaves the same way in the new user.
As for your iPod issues, you should try restoring your iPod via iTunes, erasing all software and content components on the device. Once the device is restored, do not restore from backup and do not sync any of your content.
You mentioned that you use Notes and Contacts. You want to make sure that you email yourself your notes from the application and assure that you've got all your contacts synced with your computer.
Use the iPod in its restored state for a few hours. If you notice a favorable difference, begin to start syncing your content back over.
Good luck!

Sony Camera no longer recognised after Mac OS 10.4 upgrade

I use Final Cut Pro HD 4.5 and just upgraded to Tiger.
When I start up FCP I get a message I have no camera connected.
But checking the System Profiler I can see the Sony DCR-TRV33 on the Firewire bus.
I also checked iMovie, and there's no problem there. It shows Camera connected.
Do I have to update FCP? (I haven't found an update) or should I do something else? or did i make a mistake uograding to Tiger?

What you are describing is often caused by a dorked install of Quicktime as FCP uses QuickTime to do its capturing.
You might try reinstalling it (don't leave out any steps). Go to /Library/Receipts. Trash all QuickTime related .pkg files (Don't worry, you're only deleting receipts). Go to www.quicktime.com and download the latest installer and run it. Reboot.
Post back,
Patrick

Memory and CPU consumption very high after OS X10.7.5 upgrade.

Hi,
I am new to Mac world (just couple of months and still getting used to mac).
After upgrade to OS X 10.7.5, I am seeing gradual memory consumption upon normal bootup and login. loginwindow, systemUIServer and systemUIAgent processes are using almost all the remaining RAM. Also, _coreaudiod process is consuming maximum CPU.
System Preferences is not responding.
I don't have TimeMachine setup. No backup is available.
Any remedy?

Disable your Extensis / Suitcase font plugins until they can get a patch out.

IBooth camera flash not working after Mavericks v10.9.2 upgrade

I recently upgrade my laptop and I noticed that the flash in iBooth isn't working. I enabled the flash and it does flash, but the picture taken still appreas dark as if no flash was even used! Any idea how I can fix this?

I could not find any app called "iBooth." If your problem is limited only to this one app, contact its developer or see its Support or FAQ info for help. Perhaps all you need to do is add more light to the room or sit closer to your display when you make a picture?

Rear camera stopped working after iOS 7.1.2 update- iPhone 5

My rear camera is not working after I did 7.1.2 software update this morning. I see a blank screen when I click the camera app.

So my camera was fine until yesterday and pressing on the lens did not work so I went back to looking for solutions:
http://www.cydiaios7.com/back-camera-not-working-after-ios-7-update-solution.htm l
The article is from last year (IOS 7), but solution 1 worked for me. Here are all the solutions from the link:
Solution 1
Hold the Sleep button until you see the Slide to Power Off slider
Slide it and then immediately hold down the Sleep button again until you see the Apple logo
Solution 2
Open your Settings app
Tap General
Tap Reset
Tap Reset All Settings
While you won’t lose any of your data you will have to re-enter all of your passwords and personal settings again
Solution 3
Hold the Sleep and Home button simultaneously until the Apple logo appears
Let go of both buttons at the same time and let your iOS device boot up as normal
Solution 4
Try a different camera app instead of the stock one – downloadCamera Awesome, free of charge, from the App store
Install and both cameras should work properly.

Helix rear camera update doesn't work correctly

The update gfc214ww.txt for the helix camera has only a correct update for the front camera - the update for the rear camera doesn't work.
There isn't any inf-file for the 5M-rear-camera.
After the update the version 1.0.0.78 should appear in the devicemanager, but it's the old driver from 2006 from microsoft.
I think there is something missing in the installationfile:
.../CAMERA/5M_Drv
With the old driver the rear camera is very slow, like a old webcam, which show's the pictures through internet - especially it's very slow, if you change resolution to 5M.
Is there any solution?
Kind regard
Dieter

In Windows go to the control panel/system/device manager & select each of the affected devices (one at a time) and use the 'rollback to previous driver' option.

HT201412 My front camera on my iphone 5 works but my rear camera doesn't?

it's been like this since the iOS 7 update. It never did this on before i updated. Is there anyway to fix this?? I've tried turning my phone on and off and resetting my phone but it doesn't help.

Hi awkwardonline,
If you are having issues with the rear camera on your iPhone after updating to iOS7, you may want to try the troubleshooting in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
- Brenden

Very poor Random IO performance of 24 HDD Mirror-2 CSV on Win2012 R2 (Solved)

We already have a 2 separate Win2012 Mirror-2 Storage Clusters (in production) and had noted that performance was very poor.
We were looking to upgrade to Win2012R2 and storage tiering, we wanted to understand why the storage systems were performing so poorly. So, we have not built out a new storage cluster, with 2 nodes, 3 JBODs and 24 x2TB Seagate ES2 SAS drives.
We have run IOMeter to measure IOPs and the numbers are very poor, regardless of the 'geometries' we choose. Our Write IOPs results for 16KB block (this our typical DB page size) are:
2 columns, 64KB Interleave = 1043
2 columns, 256KB Interleave = 1176
4 columns, 64KB Interleave = 1424
4 columns, 256KB Interleave = 1688
8 columns, 256KB Interleave = 1677
We only tested Write IO because this should be the slowest/worse case IOPs values.
We also tested each HDD individually and they range between 270 and 330 IOPs.
By our math, the IOPs values should be in the range of 3000-3600 == 24 HDDs x IOPs/HDD div by 2 [for mirror-2], but the tested are showing values which are barely 50% of this.
Any assistance/tips would be appreciated.

We already have a 2 separate Win2012 Mirror-2 Storage Clusters (in production) and had noted that performance was very poor.
We were looking to upgrade to Win2012R2 and storage tiering, we wanted to understand why the storage systems were performing so poorly. So, we have not built out a new storage cluster, with 2 nodes, 3 JBODs and 24 x2TB Seagate ES2 SAS drives.
We have run IOMeter to measure IOPs and the numbers are very poor, regardless of the 'geometries' we choose. Our Write IOPs results for 16KB block (this our typical DB page size) are:
2 columns, 64KB Interleave = 1043
2 columns, 256KB Interleave = 1176
4 columns, 64KB Interleave = 1424
4 columns, 256KB Interleave = 1688
8 columns, 256KB Interleave = 1677
We only tested Write IO because this should be the slowest/worse case IOPs values.
We also tested each HDD individually and they range between 270 and 330 IOPs.
By our math, the IOPs values should be in the range of 3000-3600 == 24 HDDs x IOPs/HDD div by 2 [for mirror-2], but the tested are showing values which are barely 50% of this.
Any assistance/tips would be appreciated.
16KB I/Os never touch the whole RAID stripe so that's why you see virtually never performance increase (I;m surprised you actually see any). Try using bigger request size to see would it make any difference. You need multiple workers and deep I/O queues.
What are you I/O Meter settings for test except write size?
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

REAR CAMERA IMAGE VERY POOR AFTER 4.4.2 KITKAT UPGRADATION

Similar Messages

Maybe you are looking for