Rear Channel Sound Volume Controller for sound blaster Aud

Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

op
ps.
i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the Creative Mixer, be sure to disable the option for Digital Output Only, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

Similar Messages

Where Can I Find A Volume Controller For A Gigaworks G500/550W??? Help!

I have been trying everywhere to get hold of a remote/volume controller for a G500/G550W.
It seems nowhere on Earth has one? can Anybody help me?

*BUMPS*
I'm looking for a volume controller too. The wires in my controller snapped and the speakers (G500) don't work anymore!

Broken volume controller for inspire 5200

My volume controller for my inspire 5200 (http://www.creative.com/products/product.asp?category=4&subcategory=25&product=55&n av=) is broken, (it only plays music on the right side, left side is extremely low) how would I replace it, I looked on the website for the closest thing were these http://us.creative.com/products/product.asp?category=4&subcategory=30&product=9858 but it said that it was not compatible with my brand. How Would I buy a replacement?

hi,i too faced the same problem.my speaker's vol controller was broken too.i contacted the creative labs they told me that replacement is the only solution.so i had it replaced, now its working fine.

No sound volume controller in Satellite L750 Series

I just bought a new Satellite L750-A057 laptop, and found a very stupid design issue that it is has no volume controller ! ONLY WINDOWS one, so If I'm in a middle of any full screen application, I must exit or switch to desktop to lower the volume !! and same for any other situation !!
So, any recommendation about how could I control the sound volume with function keys for example ?

It seems you are right. There is no additional volume controller which would allow to set the sound volume up and down
In many cases the Toshiba Multimedia buttons contain an up and down volume buttons but it seems that the L750 does not support such buttons too
Thats shame :(

Sliding volume controller for main timeline.

I am trying to change the volume on my sound files which are located on the main timeline.(sync = streaming)
I can use a allSound.setVolume(#) to control the sound level across the timeline.
But when trying to use a sliding volume control, I get confused.
This is the code I used for the sliding volume controller
this.ratio = 0;
dragger.onPress = function() {
    this.startDrag(true, 0, 0, line._width, 0);
    this.onEnterFrame = function() {
        ratio = Math.round(this._x*100/line._width);
        _root.volume = ratio;
dragger.onRelease = dragger.onreleaseOutside=stopDrag
I started using this code for the volume control but haven't had any success with it yet.
dragger.onPress = function() {
    StartDrag(3);
If you have any suggestions or clues for where I could find a tutorial that would be great.
Thanks,
t.a.s.n.

I'll offer this solution which I utilized some time ago (I don't often deal with sound, and I normally avoid postings concerning it in the forums).
My sliding volume control is basically a two frame movieclip (volume_mc) which contains a volumeBtn object where the first frame code is:
volumeBtn.onPress = function(){
startDrag(volumeBtn, false,0,0,100,0);
gotoAndStop(2);
volumeBtn.onRelease = volumeBtn.onReleaseOutside = volumeBtn.onRollOut =function(){
stopDrag();
gotoAndStop(1);
In frame 2 the code is:
stop();
this.onEnterFrame = function(){
_parent.adjustVolume();
In the parent timeline, the adjustVolume function is as follows:
function adjustVolume(){
currentVolume = volume_mc.volumeBtn._x;
s.setVolume(currentVolume);
I use the "_x" value mainly because my sliding length is 100 pixels, starting a 0 for the volumeBtn position. But you should be able to utilize the percentage method you have to acquire a similar result. The currentVolume variable is declared/assigned intially elsewhere in the parent code.

Set sounds/volume default for all apps

How do you set volume default so that it applies to all apps?
When I go to YouTube I have to always adjust the volume.
Thanks in advance.

cafox513
You will need to make a custom template with your own settings.
The default text style is Body so set that the way you like it in the template.
If you need help with templates and styles look here:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=2&sid=2abc89bd5c5512 60fd5ce34a4e6ad05b&mforum=iworktipsntrick
You can set your custom template to open by default in your preferences.
Peter

Volume controller

I've just realised that the volume controller for my Desktop Theatre DTT2220 is faulty; whilst it turns the speakers on/off, it no longer alters the volume. Since this is classified as "End of Service Life" I cant get in contact with customer support, so what are my options? Can I buy a replacement from Creative? Wil any Creative remote be OK as replacement, or do I need a certain one?

The following solution has worked for me and other users with exactly the same problem. The only problem is that you'll have to do this a cpl of times a month or more, but it beats banging your head against the wall of customer support.
Your volume controller hopefullly just needs cleaning.
Take the screws off the back of the volume controller. The case is snapped on as well as screwed, so after removing the screws gently remove the back of the case trying not to?break anything. Just keep working it and squeezing it till it comes off. The cord and circuit board assembly will then come out together.
Remove the screw holding the black volume knob on. Then pull of the white piece of paper covering the inside of the volume. Wet a Q-tip with rubbing alcohol and work it into the inside of the volume where the metal contacts are. Use the Q-tip to spin the volume contacts back and forth.
Unfortunately, you can't actually get to the part that needs cleaning the most which is the underside of the copper contacts but by keep all the parts wet with alcohol and spinning the contacts back and forth for about a minute, you should be able to get it all clean enough for it to work well for another couple of weeks before it needs cleaning again.
If you don't have any rubbing alcohol, Listerine will also work. But get a bottle of rubbing alcohol for future cleaning.
I'll be slightly surprised if a moderator doesn't warn that by doing this, you'll void the warranty. But most of these volume controls are already out of warranty and your only other courses of action are to try and get them to sell you a replacement for $5 which will probably do the same thing in 6 months or go and buy a new speaker system from another manufacturer. Anyway customer support for Creative isn't all that bad, I've dealt with much worse and they do answer posts in this forum which they're not abliged to do.
I just wish they had a comprehensi've response for the volume control problem. Something in the knowlegde base would be great.
I think Creative products really are great. I have only Sony and Creative in my house. I have a Creative Zen 30 gig mp3 player which was way less expensi've than my friends 20 gig I-pod. And my mp3 player doesn't copy protect every single song you put on it. I've had it more than a year now and it still works as good as the day I got it.

Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

Hi all,
There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
ps.
For Windows:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma
For Macintosh:
Beta firmware for Sound Blaster Tactic3D Alpha
Beta firmware for Sound Blaster Tactic3D Sigma

Hi,
I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
Creative, you have to reupload the files on your webserver.
Download done with XP and IE8.
Bye.

I have no sound in Firefox, but sound does work everywhere else. The mixer on Win7 is not showing a firefox volume option. Where do I go to fix the issue and get sound on the browser, can't find any menu's for this fix.

New system, just setting up. Trouble shot hardware and everything works fine, just can't get any sound on the browser and have no obvious volume control for Firefox. All other volumes are at full

Hey! well funny enough, After doing a Semi format (That cool function that WIN 8 has to refresh your PC) .. I could hear sounds,!!!! Yay super happy!! .... so I continued to download all my programs once again....and then today, I went to watch a movie trailler.... and I had no sound... again... but obviolusy once the Razer synapse installed, It must have something wrong with it and its not letting me hear stuff!! and I know this becasue I borrowed a headset, a Turtel Beach x12 and now I can hear stuff all the time!! YAY! .. Ive been switching between one and the other, and the Kraken dont work! Lol
Thanks everyone for reading and helping! :D

Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
Are there any driver solutions?

I recently answered about the same question:
If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

Finding the ASIO driver for Sound Blaster ZS

Finding the ASIO driver for Sound Blaster ZS
And One More question
Anybody are using the Guitar Rig (Guitar effect software)
How to detect the Sound Blaster ZS sound card with WDM Driver

shlomokg wrote:
Hello,
I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
With the new version 2.0, Audition came with this ASIO solution that should make things easier.
Somehow for me it does not work.
Please advise, what should I do that Audition will work with my sound card?
Thanks,
Shlomo
Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
jutapaMessage Edited by jutapa on 07-2-2006 07: PM

Equium L40-10Z - Need WXP driver for sound an SM bus controller

Was vista, lost system, reformatted and installed XP as no recovery discs for Vista. Now no sound and says SM bus controller unplugged.
Any help please or where can get proper recovery discs (UK). Thank you

Hey,
I think sound doesnt work because you have no drivers installed therefore and also for SM bus controller you have to download the driver on Toshiba page.
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
*Archive* > Equium (Notebooks) > Equium L Series > Equium L40 > PSL41E
But you will see that there are no XP drivers available but what you can do is using the PSL49E model number that supports Windows XP. Usually there is no big difference between these models and the drivers should work on your system too.
For SM bus controller you have to install the chipset driver and for sound card the sound driver but latter requires Service Pack 3.

Global volume control for all sounds in a swf

Does anyone know of a way to adjust the volume of all the sounds in a swf? I'm looking to build a volume controller that changes the audio level of the swf.
Thanks!

I used:
SoundMixer.soundTransform = new SoundTransform(0);
and that mutes all sounds in my swf.

Manual for Sound Blaster Live! CT4670 needed

I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
?http://support.creative.com/kb/ShowA...=ws:,case=0846
so using that here is a link to the manual,
http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

Windows Vista Driver for Sound Blaster 5.1 P

I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Rear Channel Sound Volume Controller for sound blaster Aud

Similar Messages

Maybe you are looking for