Rear Firewire ports have left the building!
The rear firewire ports on my MacPro have stopped working (800 and 400)
Not recognizing hard drives or Audio devices.
The ones on the front still work but are making problems when connecting 400 and 800 together.
What can I do to solve this problem of fix it?
HELP!!
Thought you could use this info about getting FireWire to work! Usually they all stop at the same time though.
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good!
Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.
DALE
Similar Messages
-
My sidebar has left the building!
This WAS a perfectly centered Home.html page. I was attempted
to cleanup and rename some files and everything went to #$@&.
At any rate, the left side bar, menu container, and menu
buttons have left the building. I cannot see them in design view
and when viewing in the browser, about half of the aforementioned
appear on the left side. It's like they "escaped" from the
wrapper!?
Would someone be kind enough to point out the error(s) I have
obviously committed....please.
Thanks - David Bird
CSS code
body {
margin-left: 0px;
margin-right: 0px;
background-image: url(Art/centerbackground.jpg);
background-repeat:repeat;
#moviecontainer {
position:absolute;
top:10px;
left:614px;
width:147px;
height:100px;
padding-left:5px;
padding-top:10px;
border:0px;
border-style:solid;
#wrapper {
position:absolute;
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
font-style: normal;
line-height: normal;
color: #000000;
height: 600px;
width: 760px;
left:50%;
top:60px;
padding-top: 10px;
padding-left: 10px;
margin:-50px 0px auto -380px;
#banner {
border:solid;
border-width:0px;
width: 585px;
height: 111px;
background-image: url(Art/Logodropout.png);
background-repeat:no-repeat;
#centercontent {
width:402px;
height:auto;
position:absolute;
top:200px;
left:50%;
margin:-50px 0px auto -201px;
text-align:left;
background-image: url(Art/centerbackground.jpg);
background-repeat:repeat;
#menucontainer {
height: 400px;
width: 150px;
padding-top: 10px;
padding-left:8px;
padding-right: 12px;
#leftsidebar {
position:absolute;
background-image: url(Art/Sidebar.jpg);
background-repeat:no-repeat;
height: 465px;
width: 152px;
float:left;
top:150px;
margin:0px;
padding-left:0px;
padding-top:10px;
left: -172px;
#rightsidebar {
height:474px;
width:152px;
padding-top:10px;
margin-top:25px;
background-image: url(Art/Sidebar.jpg);
background-repeat:no-repeat;
float:right;
#rightcontainer {
height:450px;
width:142px;
padding-right:3px;
padding-left:7px;
margin-top:10px;
float:right;
home.html Code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Home - Welcome To !st State Bank & Trust
Company</title>
<link href="fsbstyle.css" rel="stylesheet" type="text/css"
/>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
</head>
<div id="wrapper">
<div id="banner"></div>
<div id="moviecontainer">
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','144','height','97','title','Ag
Movie','src','FlashAg/Ag','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','FlashAg/Ag'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="144" height="97" title="Ag Movie">
<param name="movie" value="FlashAg/Ag.swf" />
<param name="quality" value="high" />
<embed src="FlashAg/Ag.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="144"
height="97"></embed>
</object>
</noscript></div>
<div id="leftsidebar">
<div id="menucontainer">
<a href="home.html"><img
src="/Buttons/Jpegs/homeup.jpg" alt="Home" name="home" width="138"
height="24" border="0" id="home" /></a>
<a href="locations.html"><img
src="/Buttons/Jpegs/locationsup.jpg" alt="Locations"
name="locations" width="138" height="24" border="0" id="locations"
/></a>
<a href="personalbanking.html"><img
src="/Buttons/Jpegs/personalbankingup.jpg" alt="Personal Banking"
name="personalbanking" width="138" height="24" border="0"
id="personalbanking" /></a>
<a href="commercialbanking.html"><img
src="/Buttons/Jpegs/commercialbankingup.jpg" alt="Commercial
Banking" name="commercialbanking" width="138" height="24"
border="0" id="commercialbanking" /></a>
<a href="agbanking.html"><img
src="/Buttons/Jpegs/agbankingup.jpg" alt="Ag Banking"
name="agbanking" width="138" height="24" border="0" id="agbanking"
/></a>
<a href="student1sb.html"><img
src="/Buttons/Jpegs/student1sbup.jpg" alt="Student Banking"
name="studentbanking" width="138" height="24" border="0"
id="studentbanking" /></a>
<a href="mortgages.html"><img
src="/Buttons/Jpegs/mortgagesup.jpg" alt="Student Mortgages"
name="mortgages" width="138" height="24" border="0" id="mortgages"
/></a>
<a href="insurance.html"><img
src="/Buttons/Jpegs/insuranceup.jpg" alt="Insurance"
name="insurance" width="138" height="24" border="0" id="insurance"
/></a>
<a href="rates.html"><img
src="/Buttons/Jpegs/ratesup.jpg" alt="Rates" name="rates"
width="138" height="24" border="0" id="rates" /></a>
<a href="community.html"><img
src="/Buttons/Jpegs/communityup.jpg" alt="Community"
name="community" width="138" height="24" border="0" id="community"
/></a><a href="careers.html"><img
src="/Buttons/Jpegs/careersup.jpg" alt="Careers" name="careers"
width="138" height="24" border="0" id="careers" /></a>
<a href="privacysecurity.html"><img
src="/Buttons/Jpegs/privacysecurityup.jpg" alt="Privacy &
Security" name="privacysecurity" width="138" height="24" border="0"
id="privacysecurity" /></a></div>
</div>
<div id="centercontent">
<p align="center"><strong>WELCOME TO FIRST STATE
BANK AND TRUST</strong></p>
<p>sdfdsfs fasfddas sfasdfsdf fasdfdsfas asfsdfassfas
asdfsdafasdf asfdsfasfsa asdfdsfas sadfas asfdsfsfsfad
asfdfdsafasdfd sdfdsafsafs asdfdsaff asdf as
</div>
<div id="rightsidebar">
<div id="rightcontainer">
<a href="netteller.html"><img
src="Buttons/Jpegs/nettellerup.jpg" alt="NetTeller"
name="netteller" width="138" height="60" border="0" id="netteller"
/></a>
<a href="financials.html"><img
src="Art/financials.jpg" alt="Financials" name="Financials"
width="138" height="152" border="0" id="Financials" /></a>
<a href="futures.html"><img src="Art/futures.jpg"
alt="Futures" name="futures" width="138" height="190" border="0"
id="futures" /></a></div>
</body>
</html>
</html>On Thu, 17 Jan 2008 03:05:31 +0000 (UTC), "SwampeastMO"
<[email protected]> wrote:
>This WAS a perfectly centered Home.html page. I was
attempted to cleanup and
>rename some files and everything went to #$@&.
>Anybody?
Sorry, your cleanup has hopelessly munged up the code of the
page. A
quick look at your code shows that you currently have eight
opening
<div> tags, but only six closing </div> tags. You
have four opening <p>
tags, but only one closing </p> tag. You have two
closing </html> tags.
There may be more errors, but that's what jumped out at first
glance.
I'd suggest starting over. When you do, I'd also suggest you
spend a
little time working through a few CSS tutorials to gain a
better
understanding of how to position things. The first thing you
should pick
up is that position: absolute should be used only in specific
and rather
rare cases.
Gary -
I installed with no problem, but yesternight my Finder quit working. I reset, thinking it was just a one-time problem, but the finder never launched. My startup items (tablet driver, suitcase fusion, etc.) failed to load as well. They appear to be waiting for the Finder.
I waited as Spotlight re-indexed one of my external drives, then ran disk utility on all my disks and everything turned up ok. Still, the Finder is not working.
I tried booting into a different user account (the one I never use and keep only for diagnosing problems) and then booting into Safe Mode, but the problem persists.
What happened to my Finder and how can I fix it? Please help!DJAudioFreak wrote:
I have an iPhone 4 which used to have Siri but she's now left the building. There is no Siri tab in the settings under general, I've got all restrictions turned off and I can't find her anywhere. I've tried a soft restart and I've also tried a settings restart but she refuses to come back.
Any ideas?
Thanks
Upgrade to a new iphone is your only solution if you want to use Siri. -
I have an iPhone 4 which used to have Siri but she's now left the building. There is no Siri tab in the settings under general, I've got all restrictions turned off and I can't find her anywhere. I've tried a soft restart and I've also tried a settings restart but she refuses to come back.
Any ideas?
ThanksDJAudioFreak wrote:
I have an iPhone 4 which used to have Siri but she's now left the building. There is no Siri tab in the settings under general, I've got all restrictions turned off and I can't find her anywhere. I've tried a soft restart and I've also tried a settings restart but she refuses to come back.
Any ideas?
Thanks
Upgrade to a new iphone is your only solution if you want to use Siri. -
External Lync clients can't join meetings - get kicked out with "You have left the call"
My users connecting remotely (ie. from home) from their Lync clients installed on their PC are unable to join any meetings. It tries to connect, but then gives the status "You have left the call."
Internally (ie. in the office) it works fine. Additionally, the Lync Web App clients also works fine, internally and externally.
Some details on my enviroment:
Edge - Lync 2013
Front End Pools - one 2010 Enterprise (albeit one server), one 2013 Enterprise (two servers)
A standalone Lync 2010 A/V server exists as well.
Meet and dialup records internally point to 2010 pool. Externally, they point to 2013 access edge.
SRV records on external DNS are _sip._tls 443 and _sipfederationtls._tcp 5061, both point to access edge.
SRV records on internal DNS are _sipinternaltls._tcp 5061 to sip (which is an "A" record with IP for 2013 FE pool), and _sip._tls 5061 to access (which is an "A" record with the internal IP of the edge server).
Any thoughts on how to troubleshoot this would be most appreciated. Thanks.
Ron Piecyk
[email protected]Can external Lync user make an audio call to an
external user?
Your problem is mostly related with Lync Edge Server.
Check Lync Server Audio/Video Edge service is started.
Please use Remote Connectivity Analyzer to perform Audio/Video server connectivity test:
https://testconnectivity.microsoft.com/
Please check if you can find error in event log on Lync Edge Server.
Check the required ports are opened, for details, check
http://technet.microsoft.com/en-us/library/gg425882.aspx
Lisa Zheng
TechNet Community Support -
OS X Server Wikis - How do i delete people that have left the office?
OS X Server Wikis - How do i delete people that have left the office?
Some people participated in the editing of the wiki and they have now left the office. How do i remove them and their documents from the People page?
Thank you.Should be able to do so from the Users pane (select the user then click the "-" below the list of users. That worked for me with all but one out of five users I deleted. No matter what, their Wiki person page remained, so I hid it from view.
Sorry I couldn't provide more conclusive help. -
my ipod is an ipod nano 3rd generation i have left the battery to drain for 24hrs and connected it again but it doesnt even appear in the computer i dont knwo what to do now? can someone help?
Which os is installed on your computer?
-
I have just bought the macbook pro. When i connect the digital camera (sony dxc-c33p) to mac from firewire port i never see this camera imovie or quick time programs. Macbook pro never connect the digital cameras via firewire port. What can i do to solve this problem?
We are sony dealer for profesional medical products and i want to connect sony dxc-c33 digital camera to mac via firewire port. it is very interesting;
1. i have new imac at the office with latest software. when i have connected the camera it worked perfect no problem.
2. i have bought new macbook pro last week. when i connected the camera it didn't work.
3. i have connected the camera to imac mini with latest software. it worked perfect no problem.
4. finally i went to apple support office and we connected the camera and tried to take movie at four different brand new macbook pro but they didn't work.
Also when we lived this problem we have already contacted with sony support and no problem from this side. Iam still thinking the problem is firewire port at macbook pro. Finally we contacted exclusive dealer of apple in my country but they didn't solve and understand the problem yet until today (it passed 15 days) -
PCIe G5s- are their firewire ports all on the same bus?
Sorry, posted this on the G5 expansion forum but never got a response. I've been looking but haven't found an answer to this. I know it was a major issue to some people that the old G5s had all their firewire ports on the same bus. I was just hoping that Apple had fixed this so I wouldn't need to use up an extra PCIe slot with a firewire card.
So, does anyone have an answer? Thanks ahead of time for any info!Patrick:
Nope. My understanding of the FW spec is that devices slow down anything after themselves in the chain to their speed or lower. Thus, since the FW800 port isn't after the FW400 ones, the FW400 ones don't slow it down.
<
And in this corner, Brian:
<div class="jive-quote">Yes, and connecting a DV VCR or camcorder will pull everything down to 100Mbps. This is the reason some systems have dropped frame problems on capture and output to tape.< </div>
While these sound like complementary posts, the confusion is already palpating through this thread. Someone please clarify this for the rest of us. Suggest you use a standard example that includes a hi-speed FW drive, a standard FW drive and a DV deck. Hook them up in the same order to the two ports and tell us what the effects are on the performance of the Firewire bus.
At the present time, there are no PCIe firewire cards. < </div>
I had no idea.
Isn't that just weird? This is the 21st century! Why is there a new data bus structure in our Macintosh without any accessory cards?
bogiesan -
Hi Experts,
I need to remove a name on a group list in Outlook as the user is getting email delivery failure when processing via SAP (He sends the invoice for approval and emails get sent to different users for approval.) One of those users has left the company and so the user gets a email delivery failure error.
How do I remove this user who is no longer with the company?
The user is saying: When I approve an invoice in SAP it sends an email notification through outlook. One of those users is no longer with the company so it cannot deliver the notification, and in return send a delivery failure (in outlook). I am approving the invoices from my SAP Workplace inbox.
How do we know what group the email is going to?
Please let me know if you have seen this issue before. Greatly appreciate your help.
Thanks,
AsadHi,
Please check whether you are using a custom z program for sending emails of approved invoices to users. If yes then either the user email ids are hardcoded in the program else a ztable is maintained for them. -
I have bought an iphone 5 from cash converters. I'm waiting for a sim from my provider to arrive by post. I have left my phone on and twice it has turned its self off, is this right or is my phone seem faulty? I haven't been able to try the phone out yet as I didn't have a small SIM card. I'm worried as to why it would be turned off when I didn't turn it off.?.
If it turns off again take it back it,s not your problem ask for a refund or replacement
BSYDD Uk -
Vista has left the building...and the Recovery Disks do not work correctly.
I've spent over a month and a half trying to fix my non-booting Satellite A215-S5818 running Vista. Sometime mid-March (ah, the Ides of March!) I think I downloaded an automatic update and I remember the next time it booted my desktop was black; icons but no background picture. Then I noticed on the bottom right it was saying my copy of Vista was not genuine. I know that it is, because it is pre-installed. So I ran check disk from the Properties page of C: in Windows Explorer. After it ran, I got BSOD. At first I just booted into SafeMode and tried to disable whatever hardware/uninstall whatever software was causing the problem. I think I got it to boot in SafeMode once or twice, then no more. For a while I kept getting IRQL-NOT-LESS-OR-EQUAL, but I somehow stopped that through the command prompt(forum advice?). Startup Repair could not fix it, System Restore would not work on ANY restore points, even before March. The new BSOD error was:
"STOP: c000021a {Fatal System Error}-
The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x00100594)"
From then on I could only get a command prompt through the Repair Console. So I xcopy-ed my Users directory to an external hard drive and grudgingly booted from the Toshiba CD, knowing it would obliterate everything, but I was desperate. I got the 03-EEEE-0000 error. Now I have a plethora of useless(?) CDs and DVDs I have burned ISO images on of any Freeware I thought could fix it, downloaded from the Internet using my husband's Windows 7 desktop computer. I followed these instructions to the letter and it worked (I guess; it started immediately, no DOS objection), but when it rebooted I got a window (!) saying something about the type of hardware. I haven't added or changed any hardware, but I have updated the BIOS recently. So I clicked OK (no other choice), and now every boot up I get a window saying "Windows could not complete the installation. To install Windows on this computer, restart the installation". Startup Repair does not find any problems. Could it be the BIOS? I have re-flashed it twice, no difference.Oops! Sorry that was stupid on my part.
From the command prompt you could type in systeminfo , and hit the 'Enter' key, it will take a little while to run, when it finishes, scroll back up to the top and you'll see OS Version and Service Pack you've got loaded. But, if you're booting off the recovery disk, that's the system info you'll get.
If you can't get to the command prompt from the Advanced Boot Options menu, by trying to boot off the hard drive, and pressing F8, I'm not sure how you can find what Service Pack you have loaded.
By using the Recovery Boot Disk, have you exhausted all the recovery options that Jerry linked before?
What are the system recovery options in Windows Vista?
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair start...
Mike -
Hello All,
Putting together a brand new comp (specs in sig) for work (planning on making a couple dozen of these as DVR devices for a 60 camera surveillance system) and ran into a bit of a problem.
Put everything together, and the first thing i did is make a mirrored raid array. After that, rebooted, made sure that looked well and good, and then booted from cd to install xp pro. Hit f6, installed both drivers, etc. Did a full format (why not?) instead of a quick, copied sys files, restarted, went through the generic config, restarted, a little more config and boom, we're in windows. It detects some hardware, installs it automatically, lets me know i have to reboot to finish installation, so i do.
NTLDR i smissing
Press Ctrl+Alt+Del to restart
My all time favorite error, one which i've probably spent hundreds of hours troubleshooting on many different machines...
Raid array still seems fine, so i decide to see what i can do by booting from CD again... however.. if I "hit any key to boot from cd", it goes through its "setup is now inspecting your hardware configure ... " phase and then the screen goes black and the machine locks solid right when it should go to the blue setup screen.
I've read through every mention of NTLDR in the forums, and havent found anything like this yet. I tried disabling sound, lan, even SATA, to see if that would make a difference. Tried messing with the boot order (which was/is set to cdrom, hard disk, and thats it, hard disk priority is SCSI for the raid first).
Unlike other people having something similar, if i leave the cd in the drive but do not boot from it, it doesnt boot from the hard drive, just does the same as above.
I also did not have anything in the system other than what is listed below and a generic cd drive (which is fine).
Also, no pre-existing installations, as these were fresh hdds. The system was rock solid up until this point, so i'm going to rule out memory. It seems like a possible driver issue, but the black screen hang on booting from cd has got me wondering. Any thoughts?Agree with Glenn. It is certainly simpler to install your OS with just one drive in the sytem first (no reason to use F6). That way you know the system is up and running and all hardware detected with correct drivers etc. Then shut down Windows, plug in the power to your second drive, build your array, and boot into Windows. Windows will then recognize the RAID and ask you to supply the drivers. Do that via your floppy in drive A. Then you should be up and running.
Basically, as I understand it, the "ntlr is missing error" means Windows did not find the loader files it needs on the HDD that is selected as the first boot hdd. Setup would have put these files there in the previous part of the setup. So apparently it does't recognize the RAID configuration you have as an HDD (yet) because you have't set it up that way in Windows. If you start with just one drive then Windows setup cannot get "confused" at this point. -
Explain plan left the building
Hello guys, i have interesting problem, at least it seemed to me like that.
I am on 10.2.0.4.0 and for every statement i do explain plan i get the same plan ???.
Propably very known issue to some, but i didn't exeperienced that till now, so if somene have some advice, please share.
E.g.
SQL> explain plan for select user from dual;
Explained.
SQL> select * from table(dbms_xplan.display);
Plan hash value: 3995103059
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |
| 0 | SELECT STATEMENT REMOTE | | 1 | 96 | 97591 (5)| 00:05:07 | |
| 1 | SORT ORDER BY | | 1 | 96 | 97591 (5)| 00:05:07 | |
|* 2 | TABLE ACCESS BY INDEX ROWID| CCONTACT_ALL | 1 | 54 | 3 (0)| 00:00:01 | VIPBS~ |
| 3 | NESTED LOOPS | | 1 | 96 | 97590 (5)| 00:05:07 | |
|* 4 | TABLE ACCESS FULL | CUSTOMER_ALL | 1 | 42 | 97587 (5)| 00:05:07 | VIPBS~ |
|* 5 | INDEX RANGE SCAN | PKCCONTACT_ALL | 1 | | 2 (0)| 00:00:01 | VIPBS~ |
Predicate Information (identified by operation id):
2 - filter("A1"."CCCONTRACT"='X')
4 - filter((TO_NUMBER("A2"."CSCOMPTAXNO")=3007943362918 OR
TO_NUMBER("A2"."PASSPORTNO")=0109965330447) AND (TO_NUMBER("A2"."CSLEVEL")=10 OR
TO_NUMBER("A2"."CSLEVEL")=20 AND "A2"."TMCODE"<>59 AND "A2"."TMCODE"<>42 AND "A2"."TMCODE"<>61
AND "A2"."TMCODE"<>11 AND "A2"."TMCODE"<>19) AND "A2"."CSTYPE"='a' AND "A2"."PAYMNTRESP"='X')
5 - access("A1"."CUSTOMER_ID"="A2"."CUSTOMER_ID")
filter("A1"."CUSTOMER_ID"<>0)
Note
- 'PLAN_TABLE' is old version
- fully remote statement
28 rows selected....so, it looks like i am doing all that just with select user from dual .... : ) ... ok
SQL> explain plan for
2 SELECT param_value
3 FROM ncis.cis_case_script_vars
4 WHERE case_id = 296645706 AND seq = 1 AND param_name = 'OHOPNAMT';
Explained.
SQL> select * from table(dbms_xplan.display);
Plan hash value: 3995103059
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |
| 0 | SELECT STATEMENT REMOTE | | 1 | 96 | 97591 (5)| 00:05:07 | |
| 1 | SORT ORDER BY | | 1 | 96 | 97591 (5)| 00:05:07 | |
|* 2 | TABLE ACCESS BY INDEX ROWID| CCONTACT_ALL | 1 | 54 | 3 (0)| 00:00:01 | VIPBS~ |
| 3 | NESTED LOOPS | | 1 | 96 | 97590 (5)| 00:05:07 | |
|* 4 | TABLE ACCESS FULL | CUSTOMER_ALL | 1 | 42 | 97587 (5)| 00:05:07 | VIPBS~ |
|* 5 | INDEX RANGE SCAN | PKCCONTACT_ALL | 1 | | 2 (0)| 00:00:01 | VIPBS~ |
Predicate Information (identified by operation id):
2 - filter("A1"."CCCONTRACT"='X')
4 - filter((TO_NUMBER("A2"."CSCOMPTAXNO")=3007943362918 OR
TO_NUMBER("A2"."PASSPORTNO")=0109965330447) AND (TO_NUMBER("A2"."CSLEVEL")=10 OR
TO_NUMBER("A2"."CSLEVEL")=20 AND "A2"."TMCODE"<>59 AND "A2"."TMCODE"<>42 AND "A2"."TMCODE"<>61
AND "A2"."TMCODE"<>11 AND "A2"."TMCODE"<>19) AND "A2"."CSTYPE"='a' AND "A2"."PAYMNTRESP"='X')
5 - access("A1"."CUSTOMER_ID"="A2"."CUSTOMER_ID")
filter("A1"."CUSTOMER_ID"<>0)
Note
- 'PLAN_TABLE' is old version
- fully remote statement
28 rows selected.
SQL>..same plan for different sql...
..and now, i am trying to explain plan for several easy sqls but look...
SQL> explain plan for select * from all_objects where rownum < 2;
explain plan for select * from all_objects where rownum < 2
ERROR at line 1:
ORA-01039: insufficient privileges on underlying objects of the view
SQL> explain plan for select * from user_tables ;
explain plan for select * from user_tables
ERROR at line 1:
ORA-01039: insufficient privileges on underlying objects of the view
SQL> desc all_objects
Name Null? Type
OWNER NOT NULL VARCHAR2(30)
OBJECT_NAME NOT NULL VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NOT NULL NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED NOT NULL DATE
LAST_DDL_TIME NOT NULL DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)...i can't figure this out... maybe i have to flush 'explain plan' ? it's ok if it sounds funny,im off with ideas..
then i tried to explain this sql:
SQL> explain plan for
2 SELECT param_value
3 FROM ncis.cis_case_script_vars
4 WHERE case_id = 296645706 AND seq = 1 AND param_name = 'OHOPNAMT';
Explained.
SQL> select * from table(dbms_xplan.display);
Plan hash value: 3995103059
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |
| 0 | SELECT STATEMENT REMOTE | | 1 | 96 | 97591 (5)| 00:05:07 | |
| 1 | SORT ORDER BY | | 1 | 96 | 97591 (5)| 00:05:07 | |
|* 2 | TABLE ACCESS BY INDEX ROWID| CCONTACT_ALL | 1 | 54 | 3 (0)| 00:00:01 | VIPBS~ |
| 3 | NESTED LOOPS | | 1 | 96 | 97590 (5)| 00:05:07 | |
|* 4 | TABLE ACCESS FULL | CUSTOMER_ALL | 1 | 42 | 97587 (5)| 00:05:07 | VIPBS~ |
|* 5 | INDEX RANGE SCAN | PKCCONTACT_ALL | 1 | | 2 (0)| 00:00:01 | VIPBS~ |
Predicate Information (identified by operation id):
2 - filter("A1"."CCCONTRACT"='X')
4 - filter((TO_NUMBER("A2"."CSCOMPTAXNO")=3007943362918 OR
TO_NUMBER("A2"."PASSPORTNO")=0109965330447) AND (TO_NUMBER("A2"."CSLEVEL")=10 OR
TO_NUMBER("A2"."CSLEVEL")=20 AND "A2"."TMCODE"<>59 AND "A2"."TMCODE"<>42 AND "A2"."TMCODE"<>61
AND "A2"."TMCODE"<>11 AND "A2"."TMCODE"<>19) AND "A2"."CSTYPE"='a' AND "A2"."PAYMNTRESP"='X')
5 - access("A1"."CUSTOMER_ID"="A2"."CUSTOMER_ID")
filter("A1"."CUSTOMER_ID"<>0)
Note
- 'PLAN_TABLE' is old version
- fully remote statement
28 rows selected.
SQL>..and got the same plan again....
anyone with suggestons, anyone encountered this behaviour ?Vili Dialis wrote:
Is there some way to force usage of one of them explicitly, how can i know which one is currently used ?
So what happend here ?
I am using what plan table of the above, and why that table generates always the same plan ?
*/To bypass the problem (probably), and to see how it happened (possibly) see http://jonathanlewis.wordpress.com/2010/01/25/old-plan_table/
Not sure why you keep getting the same plan, but dbms_xplan does a 'select where plan_id = (select max(plan_id) ..) so perhaps the plan_table(s) you keep using have an artificially high plan_id which is always getting selected. (You could try doing: delete from plan_table ; commit; )
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful. -
HP Quality Has Left The Building
Sadly, it's true. I recently purchased a HP7000 printer. The printer would not power off; the power and resume lights blinked continuously - no paper jam; gave a general printer error (no err #) and; a loose screw lay proudly atop the carriage mechanism. Guess where I sent this printer? I received a replacement. It powers on and off; no blinking lights - I'm hopeful. But then, there was no test page printed. In fact, the paper feed mechanism didn't work - at all! The printer did nothing but prime the print heads until the color cartridges were out of ink. You know where the second printer went! That's two (2) out of two (2) defective products!!!!!
What this experience tells me is that HP is manufacturing and shipping but not testing to save the cost. I have no intentions of buying another HP product!!!On Thu, 17 Jan 2008 03:05:31 +0000 (UTC), "SwampeastMO"
<[email protected]> wrote:
>This WAS a perfectly centered Home.html page. I was
attempted to cleanup and
>rename some files and everything went to #$@&.
>Anybody?
Sorry, your cleanup has hopelessly munged up the code of the
page. A
quick look at your code shows that you currently have eight
opening
<div> tags, but only six closing </div> tags. You
have four opening <p>
tags, but only one closing </p> tag. You have two
closing </html> tags.
There may be more errors, but that's what jumped out at first
glance.
I'd suggest starting over. When you do, I'd also suggest you
spend a
little time working through a few CSS tutorials to gain a
better
understanding of how to position things. The first thing you
should pick
up is that position: absolute should be used only in specific
and rather
rare cases.
Gary
Maybe you are looking for
-
How can I change the default EXPORT directory for latest iPhoto?
Perhaps I am missing something, but I have as yet to find a way to set my default EXPORT directory. Since installing Lion and the iPhoto update, whenever I want to export it wants to put the image in 'Pictures', but I want 'Desktop' generally or some
-
Adobe 1.0 crashes upon importing iPhone 4 .mov
Hello all, if anyone could lend a hand, I would sincerely be grateful. I really want to give someone a star! I have an old version of PPro --- v 1.0 (v7.0) --- and I have also installed Quicktime Pro 7 on my Windows XP. I just got my iPhone 4 and was
-
RFC function module Structure compatibility
Dear Friends, I have one funcion module defined in R/3 system which I need to call from my EBP system. The Function module has importing parameter of the type /ZLCRD/TAX_PROCESSING_DATA, which has been created in R/3. If I try to create the similar s
-
PNG pictures not showing up in IE7 after Quicktime Install
I am having a problem on my Vista box. PNG images are not showing in IE - not on any website since installing Quicktime. It seems this has something to do with Apple's Quicktime. I have gone to MIME and File Assoc. settings in Quicktime and set the i
-
Security constraint in Web.xml of tomcat
Hi I have a web-application running on tomcat . Inside the context folder i have several directories having some pre-defined configuration files . But the user is able to directly access them by typing the path including the fileName in the URL ( I h