Rear/side speakers not working on GigaWorks S750

I have a Creative GigaWorks S750 7. sound system and a motherboard which uses Realtek HD audio.
There are four colored jack ports on the back of the sub, which are labelled:
Green: Front
Pink: Center/subwoofer
Black: Rear
Grey: Side
There are six jack ports on my motherboard:
Yellow,Blue, Black, Green, Grey and Pink.
The cable that came with the sound system has four jacks on one end, and three on the other.
On the four-jack end, they are Green, Yellow, Black and Grey (so they match up perfectly to the sub, presuming the yellow jack goes into the pink jack port).
On the three-jack end, is Black, Yellow and Green
I have plugged the three-jack end's jacks into the Black, Yellow and Green jack ports on my motherboard.
Everything is now matching. I also have Windows and the Realtek HD Audio Manager set to 7.1.
The front left, front right, front center, sub and back right work fine. However, neither of the side speakers or back left work.
Any ideas?
Message Edited by kingmustard on 05-30-2009 09:54 PM
Message Edited by kingmustard on 05-30-2009 09:55 PM

Hi Kingmustard,
It's recommended to find out which colored audio jack is used for the front, rear, side & center/subwoofer for the Realtek HD audio. The motherboard manual should have this information. Depending on the configuration, you may need a 4 to 4 cable instead. Our default 7.1 connection setup with our Creative sound cards uses the supplied 3 to 4 cable.
Please refer to this article.
Message Edited by KokChoy-CL on 06-01-2009 02:26 PM

Similar Messages

P6N Diamond side speakers not working

Sound working fine except cannot get the side speakers in my 7.1 system (Inspire T7900) to work unless I select the upmix 5.1-7.1 option on the back of the base speaker. When I have the speakers in direct 7.1 mode nothing happens when I test the side speakers. Have tried all the trouble shooting recommended by Creative but still cannot get them going. Creative have offered to replace the speakers but I suspect that I am doing something wrong. Any help gratefully appreciated.

nothing wrong with the board. It's the cable, the connector - the multi-pole connectors.
Now check this: http://www.xsreviews.co.uk/reviews/other-products/creative-inspire-t7900/
Quote
Annoyingly the connectors for use with your computer are the multi-pole type, with the center/sub (orange) and rear (black) each with 4 separate strips rather than the usual 3 strips. This means that you only have to connect 3 plugs (orange, green and black), rather than 4 (orange, green, black and grey) to drive the 7.1 system. However, not even Creative’s own X-Fi cards support this feature fully so you’d be better off with another cable (4 plugs to 4 plugs, rather than 4 plugs to 3 plugs). The system will work without multi-pole support but it’ll resort to 5.1 rather than full 7.1 or even 6.1. For the sake of an extra cable, Creative has made the wrong choice, especially considering as I’m yet to see a motherboard that has multi-pole over the additional grey plug.

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
Good luck.

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this

Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation.

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Built-in speakers not working

Please help;
Built-in speakers not working after using audio port to run remote speakers.
I tried using the FAQ in iTunes to solve problem. Built-in speakers will not play sound.
Under system prefs., sound, the device shows; Digital Out under port; Built-in Output
Under settings for the selected device;
The selected device has no outpt controls.
When I adjust volume the sound level meter shows level on high but cancelled out (circle w/ slash).
I notice RED LIGHT from inside sound port. Sound works when headphone are plugged in but not external speakers.
thank you for any advise.
Steve

Check out this post...
http://discussions.apple.com/thread.jspa?messageID=3827290&#3827290

Imac intel internal speakers not working windows8

Imac intel internal speakers not working with windows 8 external and head phones work just fine

Macs don't support Windows 8 at this moment. Wait until Apple launches drivers for that new Windows edition

TS1574 optic digital port can't be shut off and the sound of speakers not working! what to do?

optic digital port can't be shut off and the sound of speakers not working! what to do?
this happened after taking out the head-phones. Now even after pressing CMD+ALT+P+R when booting - the sound of booting appeares BUT after the desktop is ready the sound doesn't work and sound buttons show the sign "circle with crossed line"

If there is a red light visible in the audio output port, the switch id stuck. Insert the earphone jack a few times. If that fails to trip the switch, try a toothpick or similar device and jiggle it inside the port. If that fails, try a shot or two of compressed air. If still no success, go to a repair facility.
Ciao.

My iPhone 5 shows the flashlight icon but in a shadowed way, as if it is disabled. Also the rear camera is not working. The iOS version is 7.1.1

My iPhone 5 shows the flashlight icon but in a shadowed way, as if it is disabled. Also the rear camera is not working. The iOS version is 7.1.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

4s speakers not working..does not ring either

speakers not working on my 4s...should i go to verizon or the apple store?

Is the silent switch on?
Is the volume up?
Have you tried the basics? restart, reset, restore.
If you have tried all of the above then make an appointment at the local genius bar.
Verizon does not provide service for iphone. Apple does.

Iphone4 speakers not working while calling!!

Hi
Can somebody help me?
My Iphone4 speakers not working while calling only and they work elswhere!!
I tried to reset the devise with sleep and home buttens but nothing changed?!
Thx

Hi
Can somebody help me?
My Iphone4 speakers not working while calling only and they work elswhere!!
I tried to reset the devise with sleep and home buttens but nothing changed?!
Thx

Rear speakers not working in 5.1 chan

MIne is RealTek soundcard, HD Manager application shows option for 6 channel selected the same and tested all 5. speakers, all are working. when i run a movie from VCD in Nero Showtime i selected 6 channel audio output but only rear speakers are not working, when i selecxt 2 channel sterio output all are working. please advice how to get all speakers working for surround sound effect

MIne is RealTek soundcard, HD Manager application shows option for 6 channel selected the same and tested all 5. speakers, all are working. when i run a movie from VCD in Nero Showtime i selected 6 channel audio output but only rear speakers are not working, when i selecxt 2 channel sterio output all are working. please advice how to get all speakers working for surround sound effect

Why the iPad internal speakers not working with some applications and key sound?

My iPad1 ' internal speakers not fully functioning. It is working with music and video, YouTube , but not working with applications such as games.
Also with key pad sound .
Please help me in this regard.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Rear/side speakers not working on GigaWorks S750

Similar Messages

Maybe you are looking for