Rear speaker problem

Hi, i have 4 speakers and a subwoofer. Mainboard is asrock xtreme4 which come with realtek hd audio.
You may know the famous "rear speaker problem" on windows products. While speaker test just works fine, rear speaker never works on media player, winamp etc...
But recently it become really interesting because, that rear speakers works fine on firefox browser 22.0. So it gave me hope the solve this problem once and for all.
Right now, when i listening any thing on firefox, rear speakers works fine. But not working on Chrome and other stuff.
What firefox 22.0 made to work speakers fine?

hey have you tryed connecting other speakers to the bad connected one and see if it was not a bad channel? if so then let me know and I will look in to this problem more and try my best to get you the answers your looking for ok

Similar Messages

Help with P5800 5.1 rear speaker problem.

I have the Inspire P5800 5.1
When I test the speakers with the Surround Mixer control panel I get the test voice on all 5 speakers. If I play a DVD with 5.1 Surround (Spiderman 2) I get no sound from the rear speakers. I have Soundblaster Live. 24 Bit. I am using ATI All-in-Wonder to play the DVD.
What could be my problem? I beleive it should be a set up in the computer, I just don't know where.
My computer skills are intermediate.
Thank you for any help,
Al

Using the Creative software (double click speaker icon in tray) then go to speaker setting make sure that you select 5.1 Speakers. If possible, try and download PowerDVD6 this software allows you change the speaker configuration to 5.1 etc...
You may also have this feature in ATI all in wonder. Check Audio options, make sure that 5.1 is selected or similar. It could also be that the ATI software does not support 5.1 only stereo 2 speaker.

Gigaworks S750 Rear Speaker Problem

I am having problems with the rear left speak channel. I have swapped the speaker with another one and so I know its not the actual speaker, more likely the chanel or the setup. I have cheked all wire and they are fine. Any ideas?

I've found that all the connections are very fiddly - both into the sub and into the actual speakers. It might sound silly but disconnect and then reconnect everything. It seems to bring out a different sound quality everytime i do this. I've had problems with the side rears before now, but this method cured it.

Having Problem With Inspire 5.1 5300 rear speaker...

After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

Z-5500 speaker problem.

. Ok first of all i have Creative Z-5500 speakers and i also have the creative fatalty sound card, i checked all the cabes to the speakers and they are connect right... for some reason when i play any music i only hear it from the rear speakers... all of the 3 front ones are totally dead... i unistalled and re-installed the driver for the sound card and same thing... its set on 5.... and im just running out of ideas why is that happening? Thx

Have you tried any of the following
Plug a different device into the speakers to test the front two
Plugged the front speakers into the rear speaker jacks to test if the speakers are actually physically damaged
Change the speaker settings in the Creative Audio Control Panel (or Creative Consolel Launcher if you prefer) and change to 2. instead of 5. and see of sound can be heard from the front L/R speakers.
Run creative diagnostic utility to check if there is a problem with your creative card. You should change your speaker configuration back to 5. before you run this.
Make sure that the 3 audio cables needed for 5. (Green/Orange/Black are the colors of my cables) are plugged in to the correct spots on both the card and your speakers. The manual that came with your creative card will show you which holes are for what cables. The color codes are: Green=Front, Orange=Center/Subwoofer, Black=Rear. The back of your z5500's already has those colors on the holes so no need to wonder there.
On your z5500's there is a switch on the back to the far right that switches between "Stereo -2" and "6ch direct". Make sure the switch is on Direct.
Also make sure the effect for the Direct input on your z5500's is set to 6-channel Direct.
These steps should help narrow down what could be causing your problem.

Nothing from my rear speaker and sub using VISTA with SB X-Fi Xtreme Noteb

I know many people have problems with audio not coming out of their rear speaker. I can't seem to even get sound from the diagnosis tests. All I hear is sound and noise coming out of my front speakers and nothing else. Is this a Windows Vista driver problem?

I don't know if this is going to help or not..
. Is on-board sound disabled in the bios?
2. Have you gone through the Win XP control panel playback and recording settings to make sure microphone isn't disabled?
3. Is digital line-in disabled?
4. In the Soundblaster Control Console you've selected mixer and then selected line-in 2 / mic 2 by clicking on the "rec" slider?
Good luck.

Audigy 2 ZS Rear Speaker Probl

? Im positi've I have my speakers hooked up right but whenever im playing a game, Team Fortress 2 for example, when im facing the action I can hear everything fine, but when I turn around I hear no sound. Also the I tested my speakers on the Counter Strike Source speaker test thing and I failed to hear any audio from my center and rear speakers, my front speakers worked fine. I have the Creative audio console and windows control panel set to 5. surrond sound. I am also using the latest drivers. I tried the new beta drivers but I hear no sound when using those. By the way im using windows xp professional 32 bit. What do you suggest I do to fix this problem?

D3vL,
Yes that's normal for stereo stuff since they only have 2 channel without CMSS. It's just that Li've and Audigy 2 ZS is built a little differently.
With CMSS2, the sound effect on center and rear speaker maybe a little soft but you should have sound output also. Try adjusting the Stereo Focus slider and see if it makes any different. Since you are using the soundcard upmix feature, turn off the upmix feature(LED off) of the S750 on the control pod.
Jason

Both rear output is heard through left rear speaker, none in right rear spea

I have a Soundblaster Audigy card with Creative Insire 5. 5200 Speakers. The problem I am having is no sound is heard from the right rear speaker channel. I know the speaker works, as I have switched them around to check (they all work). Doing the speaker test, all speakers are heard in order, and when it gets to the left rear speaker, it plays both the right and left rear message. In other words, both my right and left rear sounds are playing on the left rear speaker, with no sound out of the right rear speaker. I have all of the updated drivers for the product. I don't know if it is hardware or software related, or if it is the speaker system, but I do know all the speakers work. I am showing no problems (even hidden) in the hardware manager. Any help or clues would be appreciated

Bump !!?Cause I am having this exact same problem with my xf-i (XtremeMusic) and my logitech Z-5500 Speakers. I have them connected using the 3 analog wires and yes, they are correctly plugged in. The Logitech Control Pod is set with the switch in the rear to the 6 channel position and the Pod is listed as the source being 'Direct' and '6 Channel' when I try this. When I run the speaker test, it fails the right rear speaker (no sound) and when I try the left rear, the sound comes out of both rear speakers. I have also tried the THX speaker setup settings and they do the same thing on the test (set for 5.). Also, I have all the settings on the Entertainment module set to push the audio to the External Decoder (for everything, since the 5500's can do this, decode DTS and Dolby). Regardless, it should at least be able to pass the Speaker Test. I did have an Audigy card installed, but I removed it before installing this card. The only thing I had installed for the Audigy was the drivers and there was nothing listed in 'add/remove' to remove them. I had none of the apps installed (cause I knew the xf-i was coming)?I sent a email to creative and have heard nothing (been a day, I know they say -2 days, but come on, hire people !!). Can someone out there please help !
!!! Thank alot?Dr-

4.1 Speaker Setup - No sound from rear speak

Opsys: Windows 2000 (just installed)
Card: Audigy 2 ZS Platinum
Software: Installed full sets of Creative software, everything runs
I'm trying to set up a 4. system where I'm using 2 set sets of stereo speakers plugged into line outs # and #2.
The problem is that I get sound only from line out #. All attempts at plugging the second set of speakers into the other line outs doesn't do anything for sound. I have switched the 2 sets around and they both work from lineout #.
The speaker calibration program only works for the front left and right speaker (i.e. no rear speaker output). I have tried more than just the 4. option, but none of them produce any sound to the rear speakers.
I have enabled EAX and CMSS, but this hasn't done any good. Still no sound from the rear speakers.
I checked the speaker set up and the volumes are midway for all speakers, both front and back.
Soooo. My guess is driver problems or maybe the 2 way stereo plug doesn't work with the 3 way plugs of line out #2 and #3.
Any ideas?
Rick

Okay, I get the stupid award for this one. I didn't notice that I was plugging my rear speakers into to the mic instead of the lineout 2. Well, in my defense, they are symetrically located around lineout and they do fit.
I would suggest people with sound issues to look at the other utilities. The one that helped was the Thx Setup console. This displays all info about the speakers, analog/digital settings, and even a picture showing the card plugs (that got the noodle thinking).
Also the Surround Mixer showed the correct configuration of the 4 speakers but without a sub hooked up. This fits my 2 stereo connections exactly.
Cheers.

Losing output from rear speak

Hello,
I have a SB Audigy 2 DS sound card and a Dell 5. Surround Sound speaker systems. All the speaker tests work and normally all the speakers work.
My problem is that sometime I notice that the sound has stopped coming out of the rear speakers. I don't really no what causes it or what it is that I manage to do to get it restored.
When I notice it, I usually end up rebooting, monkeying around with the calibration settings, monkeying around in the Control Panel>Sounds and Audio Devices>Speaker setting, etc. Everything always looks normal and after monkeying around long enough the rear sound is usually restored.
I just noticed it and spent fi've minutes monkeying around getting it restored. This is becoming frustrating as everything work perfectly for over a year. There most be some sort of conflict but what and where is beyond me.
If any of you readers have ever experience anything like this and can offer assistance I will appreciate it. Thanks.

Here's a tip from something that I discovered. Not sure who/what resets the volumes, but for some reason Windows will set the volume for all channels OTHER THAN left/right to 0, effecti'vely muting them. The solution? Go to "Control Panel", "Sound and Audio Devices", click on "Speaker Voume..." in the bottom half, and make sure that all the sliders are at max or at least moving together. This was my problem when I lost center and rear speaker outputs despite all other testing showing no problem.

No Sound From Rear Speak

I just noticed there is no sound coming out of my rear speakers. I have the Creative SOUND BLASTER X-Fi Fatalty card and the Logitech z-5500 speakers. EAX is enabled and I have tried checking out control panel on XP. Anyone have an idea?

Here's a tip from something that I discovered. Not sure who/what resets the volumes, but for some reason Windows will set the volume for all channels OTHER THAN left/right to 0, effecti'vely muting them. The solution? Go to "Control Panel", "Sound and Audio Devices", click on "Speaker Voume..." in the bottom half, and make sure that all the sliders are at max or at least moving together. This was my problem when I lost center and rear speaker outputs despite all other testing showing no problem.

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Inspire 5200 5.1 sound from both R & L rear speakers coming from left rear speaker only

I have done a complete sound system check, every thing check out good. From the rear speakers I am only getting sound from left rear. When i do a speaker check, when right rear speaker lites, sound comes from left rear. when left rear speaker lites sound also comes from left rear speaker.

creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason

Solved my scratchy speaker problem. Do a hard reset. Home,sleep button. Hold till screen goes blank.

Had a scratchy speaker problem and strange sounds when ipad shutdown. Hold the home button and sleep button till screen goes blank. Turn on after a minute or two. Fixed it on ipad 4. Good luck.

Apple replaced with new phone under warranty, had to haggle a little to get that done. Set up new one as a new phone, not from a backup, so as to not transfer any possible software issues to the new one, still re-setting up everything... all was good for the first week or so, now this one does the same thing, plus a new issue. While on calls the screen will go black, and the absolute only way to get control of the phone again is to hold both buttons down until the apple logo appears and phone restarts. Additionally, sometimes it will now become unanswerable when receiving a phone call, has only happened on vibrate, but it will go into a continuous vibrating mode and no way to answer the call or stop it, other than the two button restart. Does it on normal calling, and on 4g lte calling setting (verizon).

DDL or DTS = no sound out of rear speak

I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

bigjohns97 wrote:
Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
On the sound blaster the following happens
MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

Rear speaker problem

Similar Messages

Maybe you are looking for