Rear USB ports do not work on 3000 J 7387 A11 desktop

Hi all.
This is my brother's machine and it orginally came with Vista, But he was having too many problems with vista on it, so he purchased XP and had me load it for him. I was able to find all of the XP drivers on the Lenovo site, except for the drivers for the rear USB ports. So I tried to force load a driver and now it does not indicate 'no drivers installed in the device manager as it used to, but the ports don't work. The device ID for the rear USB ports is:
PCI\VEN_10DE&DEV_026D&SUBSYS_101717AA&REV_A3\3&13C0B0C5&0&58
Is there anyone else out there who has tried to load XP on one of these machines or has run into a similar issue? Any help is appreciated.

did u try installing the drivers using windows update??a similar problem i faced was solved .but mine is a 3000h series system
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

One of my usb ports in not working

On my compaq presario v5000, os xp media center, the bottom usb port is not working. When i plug a thumb drive in, it does not reconize it. The mouse lights up but does not work. It shows up in device manager and says it is working properly. The other port works fine. Just reinstalled windows and the computer is completely up to date with all the service packs etc. Have tried unpluging and restarting to no avail. Have tried updating but says it cannot find a better driver. Please Help. Thank you.

Could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://goo.gl/GDeRb
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

1 of my USB ports is not working. Help?

Suddenly one of my USB ports is not working. No matter what I plug into it, it doesn't work. Any help or ideas would be appreciated. Thanks.

Not in the one that's ailing, but it does in the other one. I've also plugged in an external USB hard drive and that doesn't connect. Also a mouse's USB dongle and that doesn't work in the ailing one, but is fine in the other one.
I've also tried ( a couple of times ) to simple reboot hoping that would jog it, but that doesn't seem to help either.

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

Invoke your warranty and take it back.

USB Port does not work W510

Hello all,
I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
In the Lenovo part list it is referred to as "usb Sub card yellow".
It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
Hoping that somebody might be able to help me...
Paul

I have a reproducible test for this issue on my W510.
1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
2) Hybernate the system.
3) Resume the system.
4) Confirmed the mouse does not work.
5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
7) Restart the system and confirm the mouse still does NOT work.
8) Shut down the computer (a full shutdown, not standby or hybernate).
9) Power the system back on.
10) Confirm the mouse is now working in the rear port.
I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not. It appears that the data connection does not work after the system is resumed from a sleeping state. I have the latest UltraNav driver and utility and the latest power management updates.
Oh, and one more test. Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on. The mouse will not work and rebooting doesn't correct it. Only a full shutdown fixes it.

My usb port does not work on all user accounts

My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
Spring 2011 macbook air with the latest OSX as of Jan 2012.
Thoughts
THANKS
Stan

Try Resetting the System Management Controller (SMC)

HP Pavilion dv6-6b10tx two of the usb ports are not working

I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
I did a bios update and did the hp update to see if it actually fix anything but not luck. So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'. What do i do??

The question is why is the port not working? Is something in the port that you can see? If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

USB ports disabled/not working

My USB ports aren't working, one is completely dead and the other supplies power but I receive an error saying the port has been disabled due to the device using "too much power." I have restarted and updated with no luck. The devices work fine on my friend's computers with no error prompts. The laptop is 2 days old and I haven't done anything that should cause a short out, other than removing a USB storage plug without ejecting first.

USB plugs only supply *so much* power to USB devices.
The usual fix is to buy a self-powered exteral USB hub (AC adapter plugged into wall). That takes 95% of the power load off of the MBP.
But then some USB hubs do not play nice with Mac, and some devices do not play nice through an external hub at all due to the additional translation of USB signals.
First thing ... do not repeat overtaxing the USB ports ... only bad comes of that, even though the MBP usually can dened itself from damage -- usually.
Go to macsales.com, see what they recommend for powered USB hubs, since they try hard to be mac-compatible nad may have beter bets thn randomly trying ones from Best Buy or Fry's or Microcenter.

My Macbook Pro USB port is not working please help

Please help..
My usb port has been working perfectly until one day it just stopped working, does anyone know how to help me?

Bring it to an Apple store or AASP.

USB Ports are not working in Windows 7

I am on a MacBook and I installed Windows 7 via Bootcamp. It is working amazingly. I love all the new features and the look.
But all my usb devices are not working. I have a external HD and a Zune and a printer plugged in and nothing shows up.
I have tried with my usb hub and without. Doesn't make a difference.
BUT, they do show up in the Hardware and Devices place. Like I can remove them but not explore them.
I have installed all the drivers for bootcamp and everything.
Please help.
Thanks in Advance.
Best Regards,
Luc

"I'm a new mac user and I've just purchased a Late 2009 Macbook White. I updated bootcamp and installed windows 7 on it, and upgraded the boot camp assistant on the Windows 7 to 3.1. but when ever i plug in a Flash drive into the upper slot it does not seems to recognize it and there is no safely remove icon on the task bar, but i am able to see it in my computer. but when i plug the same flash drive to the lower usb slot everything works fine, autorun, safely remove. can any one help me with this problem, is it a Hardware problem or Software problem."
do you have the same problem as me?

Rear USB ports do not work on 3000 J 7387 A11 desktop

Similar Messages

Maybe you are looking for