Rearanging of my codes when moving from code view to design view

I was wondering if there is a setting in Dreamweaver CC that can maintain the way I wrote my codes?
This is what happening:
I work in code view and write my codes. then I go check it out in design view, then I come back to my codes and Dreamweaver justify my codes... it's really annoying. is there a way to preserve the design (the way I wrote my codes and it will stay as is no matter what)
Side note: I am not talking about split view where it is expected that the code would move around with fluidity. I am talking about full code view. thanks

No I don't mean that... but I think I figured it out.
Here is what I think: Working in design fluid grid layout causes additional codes to be added to my existing codes. I have learned to start keeping a close eye on this because the names of my classes are starting to grow like crazy. I had tried to design something in fluid grid when I first got Dreamweaver (well because, that was one of a major selling point for me) I soon realized that having little exprience in css to start with tripled how complicated it became to apply proper styling throughout a webpage so I went back to the basics and learned how to work with css first. I am getting pretty good at it now and felt it was time to give Fuid grid another shot. I had forgotten about how tricky it is to keep things tight in that environment. So all it was; I am almost 99.9% sure of it was because when I went and changed some setting in the gui I didn't noticed that it tagged another name to my already name class. So in a sense I am getting multiple classes tags for one item. After a while the extra code inserted by Dreamweaver messes up all the code layout (that I have beed trying to keep tidy as much as I can) lol. Gosh! I am really starting to like Dreamweaver, but man O' man... I think I am really starting to hate using the graphical environment and starting to really understand what the old boys keeps on saying that it is best to hard code than trying to adjust things with the graphical environment.

Similar Messages

When moving from a list of threads view to a thread would be nice to jump to last thread read.

When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
Sometimes the threads get rather long. Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post.
Seems this could be implemented in javascript without too much problem. Might be a problem of when to get rid of the tracking data.
Robert

This would be a new capability. I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions. However, I am interested in jumping to the first post that I haven't read.
Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread. Lets assume these are divided into three pages with at most 10 items in a page:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z
The software know that I have viewed the first three pages. It doesn't know what post on the pages I have read. The software would need to assume I have read all the available posts on a page.
Now lets assume that 12 more post were added. This results in:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
It would be nice if I could go to aa.
Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same. For the existing capability of going the the last post, I was thinking of Goto Last Post.

Code being moved around after editing in Design View

Hello all,
Call me a neat freak, a OCD guy, whatever, I don't care. I
primarily work in code view and when I do, I like to have my tags
in a nice, neat, order.
It didn't do this in DW8 but it does this in DW CS3, but I've
noticed that ANY time I make any sort of a quick change in Design
View, it moves the tags around a little bit. Not by a lot, usually
only a few spaces to the left or the right, but it screws up my tab
spaces and it's driving me crazy!!!!
I'm sure it's something simple, some checkbox I need ot
check, but how do I fix this, if I can fix it at all?

Hello all,
Call me a neat freak, a OCD guy, whatever, I don't care. I
primarily work in code view and when I do, I like to have my tags
in a nice, neat, order.
It didn't do this in DW8 but it does this in DW CS3, but I've
noticed that ANY time I make any sort of a quick change in Design
View, it moves the tags around a little bit. Not by a lot, usually
only a few spaces to the left or the right, but it screws up my tab
spaces and it's driving me crazy!!!!
I'm sure it's something simple, some checkbox I need ot
check, but how do I fix this, if I can fix it at all?

Flex app doesn't work when moved from original location

I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers

Dreamweaver CC crashes when switching from code view to design view

I am experiencing a recent problem with a file I am currently working. When I switch from code view to design view Dreamweaver crashes and requests a shut down. Other files seem to work without a problem. This particular files has 3 cascading EdgeAnimation CC files that are selected by media queries. I can test the page online without a problem but not in design or live view.

Since your new page didn't crash, this leads me to believe that you have some critical errors and/or conflicts in your other page(s).
Try running your code through the W3C validation tools.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Also debug JavaScript.
JavaScript - http://www.jslint.com/
Nancy O.

Can FCP7 Regen Time Code when capturing from tape to allow for TC Breaks?

Can FCP7 Regen Time Code when capturing from tape to allow for TC Breaks? Or does it start capturing with time code from the tape and then just keeps rolling regardless of TC breaks on the tape, thus not matching code after the first TC break? I don't see any preferences where you can ask it to regenerate the code it is writing based on the code it's receiving from the tape (i.e. continuous jam). I'm guessing it just keeps on going with the code it started with. Anyone know different?
Thanks!

It is not clear from your post what you want FCP to do when it encounters the timecode break on the tape that it is ingesting.
You have three choices:
If you choose "Make New Clip" then FCP will stop, roll the tape forward to legitimate code, and then attempt a pre-roll and start capturing again. The new clip will have timecode that corresponds to the timecode on the tape.
If you choose "Warn After Capture", FCP will keep ingesting and the timecode will continue contiguously from the source code of your starting clip, meaning it won't match the tape after the point of the break.
MtD

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

Can you keep your playlist when moving from computer running xp to computer running vista. v

can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Performance issue when moving from 4.6c to 6.0

Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware.
For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c. We've noticed other SAP area's are taking longer as well. With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer. All leading to more time to do a PGI in 6.0.
Has anyone else noticed this increase in Response time when upgrading to 6.0 ?
Thanks,
David

Hello.
Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
Run the optimizer statistics and see if it get's better.
Regards.
Valter Oliveira.

When moving from one master block to detail block it must save record.

when moving from master block to detail block it must save record or it will give message like 'save changes '....
when i write it ,but this message will be coming.
But if i save record message will appear two times.
plz Help me.
Thanks & Regards
Venkata.
Message was edited by:
venkata

Hi,
you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
Jose.

Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts. Can anyone help to find and restore my contacts?

IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts. Can anyone help find the contacts on my phone and restore them?

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

How do I get PRO to not include codes when converting from Word?

When converting from word, I get all of the codes printed too.How do I get it to not show in Adobe? I'm on a deadline and right now not happy that I upgraded. Need my old adobe back!
Board of Directors Meeting{ PRINT \p para "[
/EMC pdfmark [ /StPop pdfmark" }
{ PRINT \p para "[ /Subtype /P /Title () /StPNE pdfmark" }{
PRINT \p para "[ /StBMC pdfmark" }{ PRINT \p para "[ /EMC pdfmark [ /StPop pdfmark" }
{ PRINT \p para "[ /Subtype /P /StPNE

Thanks Bill for your reply.
I am using Acrobat XI, just downloaded it and Word 2003. There are no punctuations on my form, I just hit return to go to the next lines.
I put in a little square check box and that is also causing issues. I checked to make sure the field codes are off on the original word doc.
I did try from the printer to save and adobe and I get the same codes. Other people that I work with are able to get my document to save correctly in acrobat with the same versions of word and XI.
It has to be some small setting on my computer.

Dreamweaver Momentarily Freezing When Moving Between Code and Design View

I have Dreamweaver CS4 and have had a problem that just started yesterday. I have rebooted my machine to no avail. The local copy and the live copy of the site are on two different servers that we access through a local network.
Dreamweaver slows to a standstill if I click to another program and then attempt to go back into Dreamweaver or if I switch between design and code view.
I haven't made any changes to Dreamweaver in the way of added extensions or updates. Is it possible that the cause of this could be either a server problem or a connectivity to the server problem?
Many thanks in advance for any help you could provide.
Andy

You can use CTRL+# to switch between Code and Design View.
By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

Rearanging of my codes when moving from code view to design view

Similar Messages

Maybe you are looking for