Rearranging the icons on the homescreen

Probably a stupid question, but how do you rearrange the icons on the homescreen? I did it once by accident and now can't figure out how to do it again!

Figured it out!

Similar Messages

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

you can suggest it here - http://www.apple.com/feedback/iphone.html
And it is only a problem if you want a blank first screen. Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

How do you rearrange app icons on the computer? I used to be able to do it in the older versions of IOS

How do you rearrange appp icons on the computer and then sync them to mu Iphone. With IOS 7 I can no longer do it.

It's the same as it's always been. Do it in iTunes.

HT201401 I 'lost' the icon for the camera. how do I retrieve it?

I 'lost' the icon for the camera. how do I retrieve it?

Check Settings>General>Restrictions to be sure Camera is On. If it is, swipe your screens to the right and search for Camera. If it's hiding in a folder, the name of the folder will appear to the right of Camera. If you don't see a folder name, it's not in a folder, but is on one of your screens so search for it. If all else fails, go to Settings>General>Reset>Reset Home Screen Layout. This will restore the original home screen layout but will rearrange your apps in order to do so.

Can the icons on the iPhone screens be bigger?

Can the icons on the iPhone screens be bigger?

If you mean the apps on your homescreen I dont believe there is a way to make them bigger. As far as my experience goes in apple products I have not seem a way to enlarge the icons on your iphone screen.. I hope this help and best of luck.
-Jason

The other day I had downloaded the latest version of Firefox and now none of the icons for the different websites I normally go to are there?

As I said, the other day I had downloaded the latest version of Firefox and after doing so none of the icons for the different websites that normally go to are no longer there. Websites such as MSNBC, MSN, Most visited, that entire strip is no longer visible. I tired resetting Firefox and still nothing. Can anyone tell me how to get them to appear again? It's a hassle every time that I want to go to one of those sites I have to type it in the search bar, instead of just clicking on it as I did before. Please keep in mind if you answer, that I'm still learning about these things called computers and not very well versed in some of the things that you experts know:) Thanks

On Windows XP Firefox shows the menu bar by default and not the orange Firefox menu button that is shown when the menu bar is hidden.<br />
The menu bar is the toolbar at the top that shows menu items like File, Edit, View, History, Bookmarks, Tools, Help.<br />
You can press the F10 key or tap the Alt key to bring up the "Menu Bar" temporarily in case this bar is hidden (View > Toolbars or Firefox > Options).
The Navigation Toolbar shows the Back and forward button and the input field where you type the address of a site that you want to visit (aka location bar) and also has a search bar where you can type items that you want to look up with a search engine (Google).
See also:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing
*https://support.mozilla.org/kb/Browsing+basics
*https://support.mozilla.org/kb/Tabbed+browsing
You can attach a screenshot in case you still have problems with the toolbars to show what you want to change.
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

I can't click on the icons at the top of a site. What's causing this?

I have firefox and it's having a strange problem today. When I'm on facebook, I can't click on the icons at the top. I can't click the message, friend request, notifications, home, profile icons and can't click the one that allows you to sign out. So i can't even sign out. What I mean by can't click is when I put the cursor over those icons, it doesn't change into the finger. When I left click it anyway, nothing happens. This doesn't happen in internet explorer, but I want to keep using firefox. What's causing this? I also noticed that this doesn't just happen on facebook. I've uninstalled and reinstalled firefox. I restarted the PC. It didn't help.

The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

How do I stop my MacBook clearing the icons off the desktop when I switch off

How do I stop my MacBook clearing the icons off the desktop when I switch off the machine?

Hi Matt
After I create say a word document, file it on my desktop and then shut down my machine. The next time I open up the MacBook the file icon has been removed from the desktop. I can still retrieve the file in a folder labeled with the month I created it. But why has the OS removed it from the desktop and how can I stop it happening?
It happens to alias icons as well!
Regards

How to set the icon for the entire application with JFrame.setIconImage

I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
How can I set the icon for the entire application?
How can I set the icon for JDialogs?
Thank you

In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
cheers,
Greg

Could you please add to the smaller windows in mission control the icons to the open applications

Please Apple add this feature. I loved spaces and could see in the open windows better to know where I'm going. Just add the icons to the small windows and that should take care of the problem. I'm getting lost because I'm not sure which the application is in what window.

Apple don't read these forums, they're for user-to-user only. You want:
http://www.apple.com/feedback/macosx.html

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

To display the icon on the report output

hi friends good afternoon!
iam devloping a report which need to display the icon on the output.
when i press the icon some action will be performed,
this is my requirment plz help.

Hi,
First declare INCLUDE ICON in the program Code.
Then you can write the different Icons:
declare a single char field.
move the icons into that and display.
sample code:
form select_icons.
data: w_disp_tab like zpickdisp,
        w_disp_head like zpickhead,
        w_color like zpickdisp-color,
        ov_icon like zpickdisp-ov_icon,
        gi_icon like zpickdisp-gi_icon,
        to_icon like zpickdisp-to_icon,
        lp_icon like zpickdisp-lp_icon,
        pc_icon like zpickdisp-pc_icon,
        lv_icon like zpickdisp-lv_icon,
        vm_icon like zpickdisp-vm_icon,
        em_icon like zpickdisp-em_icon,
        t_ovst_tab like t_disp_tab with header line.
constants: c_col1(3) value 'C10',
             c_col2(3) value 'C20'.
sort t_data_tab by lgtor vbeln.
w_color = c_col2.
loop at t_data_tab.
    at new lgtor.
    fill ALV header table
      clear w_disp_head.
      w_disp_head-lgtor = t_data_tab-lgtor.
      append w_disp_head to t_disp_head.
    endat.
goods issue status & overall amber/green only
    case t_data_tab-wbstk.
      when c_c.
        move icon_green_light to gi_icon.
        move icon_green_light to ov_icon.
      when others.
        move icon_red_light to gi_icon.
        move icon_yellow_light to ov_icon.
    endcase.
transfer order status
    case t_data_tab-lvsta.
      when c_a.
        move icon_red_light to to_icon.
      when c_b.
        move icon_yellow_light to to_icon.
      when c_c.
        move icon_green_light to to_icon.
      when space.
      write N/A
        to_icon = 'N/A'.
    endcase.
loaded to pallet status
    if not t_data_tab-zpallet_no is initial.
      move icon_green_light to lp_icon.
    else.
      move icon_red_light to lp_icon.
    endif.
pallet count status
    if not t_data_tab-zcount_check is initial.
      move icon_green_light to pc_icon.
    else.
      move icon_red_light to pc_icon.
    endif.
loaded to van status
    if not t_data_tab-zvan_no is initial.
      move icon_green_light to lv_icon.
    else.
      move icon_red_light to lv_icon.
    endif.
van manifest status
    if not t_data_tab-zvan_print is initial.
      move icon_green_light to vm_icon.
    else.
      move icon_red_light to vm_icon.
    endif.
end of day manifest status
    if not t_data_tab-zeod_print is initial.
      move icon_green_light to em_icon.
    else.
      move icon_red_light to em_icon.
    endif.
move working data table to display table
    move-corresponding t_data_tab to w_disp_tab.
    w_disp_tab-ov_icon = ov_icon.
    w_disp_tab-gi_icon = gi_icon.
    w_disp_tab-to_icon = to_icon.
    w_disp_tab-lp_icon = lp_icon.
    w_disp_tab-pc_icon = pc_icon.
    w_disp_tab-lv_icon = lv_icon.
    w_disp_tab-vm_icon = vm_icon.
    w_disp_tab-em_icon = em_icon.
    w_disp_tab-color = w_color.
fill N/A values for initial fields for display
    if w_disp_tab-packvorschr is initial.
      w_disp_tab-packvorschr = 'N/A'.
    endif.
    if w_disp_tab-exidv is initial.
      w_disp_tab-exidv = 'N/A'.
    endif.
    if w_disp_tab-zpallet_no is initial.
      write 'N/A' to w_disp_tab-zpallet_no.
    endif.
    if w_disp_tab-zvan_no is initial.
      write 'N/A' to w_disp_tab-zvan_no.
    endif.
display different color for new doc number
    at end of vbeln.
      if w_color = c_col1.
        w_color = c_col2.
      elseif w_color = c_col2.
        w_color = c_col1.
      endif.
    endat.
    append w_disp_tab to t_disp_tab.
    clear w_disp_tab.
endloop.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
data: ov_stat_red(1).
clear w_disp_tab.
sort t_disp_tab by vbeln.
loop at t_disp_tab into w_disp_tab.
    at new vbeln.
    check all line items for delivery
      loop at t_data_tab where vbeln = w_disp_tab-vbeln.
        if t_data_tab-lvsta = c_a.
        set overall status to red
          ov_stat_red = c_yes.
          exit.
        else.
        leave green/amber status icon as previosly determined
        endif.
      endloop.
      if ov_stat_red = c_yes.
      set overall status to red for all items in that delivery
        clear ov_stat_red.
        move icon_red_light to w_disp_tab-ov_icon.
        modify t_disp_tab from w_disp_tab transporting ov_icon
                          where vbeln = w_disp_tab-vbeln.
      endif.
    endat.
endloop.
endform.                    " select_icons
Regards,
Anji

All of a sudden I can no longer open a new tab using either the icon on the tab bar, the keyboard short cut or the File menu option. I can open a new tab ONLY by clicking on a bookmark or link.

All of a sudden I can no longer open a new tab using either the icon on the tab bar, the keyboard short cut or the File menu option. I can open a new tab ONLY by clicking on a bookmark or link

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbAD2/3.12.2.16749
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I can no longer open iphoto. When I click on iphot the screen appears and the icon in the centre of the screen continues to rotate . No library or other item appears on the left.

I am no longer able to access iphoto. When I click on the icon. The screen opens but remains dark with the spinning icon continuing indefinately. In the light panel on the left hand side there is no list of albums or the library.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Rearranging the icons on the homescreen

Similar Messages

Maybe you are looking for