Reason 2.5 nosie with SB Audigy2 ZS Platinum

hi all iam sorry for my english but it`s ok
after all of what i just read it seemes that i really have the same proplem just like others!
BUT MY PROBLEM IS DIFRENTE
when i am play a mp3 file it`s ok and no bug found
but when i am useing reason 2.5 and try to put voulme up frome the external I/o hub i notesed nosie it really dri've my creazy
sorry i have <FONT color=#333333>SB Audigy2 ZS Platinum Pro and i noteced that when useing reason 2.5 and go to any menu i get this nosie so please help me to fix this bug

mack2058,
Yes you can. If you're sure that your existing I/O dri've bay isn't faulty, you can purchase an Audigy 2 ZS card to work with the I/O bay.
Jason

Similar Messages

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accur

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.

Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.

I put a new sim card and a new number on this phone but for some reason it is paired with a Lady who can read all my texts how do i fix this

i put a new sim card and a new number on this phone but for some reason it is paired with a Lady who can read all my texts how do i fix this?

You bought the phone from this lady right and she did not turn off imessage. Try turning off imessage and restart the phone. Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Wait a few minutes and turn imessage back on

At a loss: Audigy2 ZS Platinum & Klipsch DD5.1 connection prob

I have read many forums, posts, etc. related to SPDIF, optical and digital out connection between Audigy2 ZS Platinum and Klipsch DD5. decoder and can't find a solution to my problem. I would like to play MP3's stereo x2 or 5. through my DD5. connected to Klipsch Promedia 5. speakers, all I can get is front L and R with nothing coming from the rear speaker. I have tried each of the three digital outputs, I have set SPDIF passthrough, digital output only, 5. as well as 2/2. speaker settings, and have toggled Enable CMSS 3D in the EAX console, also have Prologic enabled on the DD5. with no success. Does anyone have any suggestions? When the Promedia's are connected to the analog connections on the Audigy2 they sound great, MP3's through all speakers with CMSS 3D enabled, but I am using the Klipsch DD5. connected to my T.V., DVD etc. as my home theatre and would like to connect my PC this way as well. I have tried 3.5mm splitter on the back of the speakers and connected to the Audigy2 as well as the DD5. but this seems to cause a significant hum, interference etc. Any ideas?

Saku746,
What you are experiencing is normal for Digital connection such as coaxial/optical. You can get more information from the article at knowledgebase.
http://us.creative.com/support/kb/article.asp?l=2&sid=5764
Check your speaker whether it support Dolby Pro Logic II or other upmix matrix. If it does, then you can enable that to provide matrix of 5. to the speaker.
Jason

Creative Entertainment Center works with Audigy 2 ZS Platinum Pro

Creative doesnt seem to hav plans to release Entertainment center for Audigy 2 ZS. But theres a way to install and use Entertainment Center with AUDIGY 2 ZS Platinum/Pro. I first installed the Audigy 4 Modded PAX drivers for Audigy2 ZS with all softwares(i downloaded Audigy 4 ISO) , Then i uninstalled the drivers and reinstalled Audigy 2 ZS drivers , and again installed Entertainment Center, Guess what now Audigy 4 doesnt prompt me that i dont have the required HARD WARE before installation starts, and i can install ny Audigy 4 software(nothing much new though , only Entertainment center and Smart Recorder). and i am now enjoying ENTERTAINMENT CENTER with my Audigy 2 ZS Platinum Pro and with Audigy 2 drivers!!!!.
I think its not proper on part of CREATIVE not to release Ent. Center for Audigy 2, as the IO box and remote control of Audigy 2 and Audigy 4 are the same( RM-500 remote). so wats the point in keeping Ent. Center just for Audigy 4 and Up?

Just set your software DVD player to SPDIF output and make sure the A2ZS is set for SPIDF decode.

Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

Hey guys, i just recently bought a Hiper Type R 580w PSU after my old PSU went bad.
I installed the new PSU a few hours ago and came across a problem, nothing shows up on screen.
When i turn on the computer, the green light is constantly on including my dvd/rw light.
I double checked everything were connected properly and everything seemed to be connected properly.
The cpu's fan are running properly including the graphics cards and the case's fan but i can't pinpoint whats causing the the green activity light to light constantly including the dvd/rw.
I also tried resetting CMOS but it didn't fix the problem.
So now i'm starting to wonder if it's to do with compatibility issues between the Hiper Type R PSU and my K8N SLI Platinum motherboard.
So i just wanted to know if the Hiper Type R 580 PSU is compatible with the K8N SLI platinum?
I would grately appreciate any assistance.

In short no.
The Hiper Type- R 580 does NOT have a -5V supply line
Although the -5V requirement has been removed from some MSI designs, the MSI page for the K8N SLI Platinum http://msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77 states:
Quote
MSI Reminds You...
• These two connectors (JPWR1 & JPWR2) connect to the ATX power supply and have to work together to ensure stable operation of the mainboard.
• Power supply of 450 watts (and above) is highly recommeded for system stability.
• For ATX 12V power connection, it should be greater than 18A.
• For this model, you must use the power supply that with a -5V pin supply.

Reason Rewire - serious problem with timing / sync

Hi - here's the problem....
I rewire Reason 4.1 to Logic Pro 8.02.
I try to record a basic drum beat (played in via midi keys) into bar 1 of Logic's sequencer.
I quantize the beat and verify visually that on the very 1st beat of the bar there is a high-hat and a kick drum that should play at exactly the same time - however when I play the sequence back the high-hat is delayed for no apparent reason!! (if i am in cycle mode - after the cycle point is crosssed the kick and hi-hat ARE played together!). If i try to bounce this section the same problem is apparent. Thus making rewire really useless!! It's as if the 1st beat of the bar can only be monophonic or something!
The same thing happens if I record a chord from a Reason instrument (Thor perhaps) - the notes that should all sound in unison on the 1st beat of the bar do not play correctly.
Anyone got any ideas what could be causing this or is it another pathetic bug?

I've had a slightly different but perhaps related problem with Reason in both Logic and Digital Performer. In my case using the Redrum drum machine in Reason and the pattern sequencer in Reason, when you start playback it will make kind of a cut-off squelch kick drum sound on beat 1, then complete silence for about 2 and a half beats, then the sound of the beat will kick in mid-measure.
I haven't done a lot of testing about when and where this happens in the sequence; I work around it by programming 2 measures of silence (pattern D-8 perhaps) into the Redrum before the start of the song and starting the playback from that. It seems like even doing that if you start playback at measure 1 beat 1 it will make that kick drum squelch on the first beat.
Sorry my comments are so vague as to be of little concrete help but I just wanted to point out that I've also had issues on starting up playback of drum beats in Reason when using it in ReWire mode.

Imported Reason audio not syncing with GB metronome

I'm working on a project in GarageBand that is built around a piano part that was exported from Reason. The Reason audio track is 128 BPM, so I created a GarageBand project that was the same tempo. The piano slows down at the very end of the song, so I set up the automator to adjust the GB tempo at the end. When I started recording other instruments, I noticed that the metronome was slightly off -- it starts out in sync, but the further along I get into the song the more out of sync it becomes (way before the tempo change at the end). I made the mistake of simply turning off the metronome and playing along with the piano track. Now I'm trying to add in some drum loops and the result has been disastrous.
So, what gives? Why aren't they in sync? Is there anything I can do about it? I'd rather not have to go back and re-record all of my instruments if that's possible to avoid.
Thanks.

After importing the GarageBand file into Logic I found that GarageBand for some reason had the the time signature changing slowly over time rather than instantly at the correct measure.

Tracking of Document Nos. with its revarsal document nos.

By which T-code can I get the List of document nos. (Created with MIRO or FB60 or F-02) with its reversal document no. in a particular period?

Hi,
Please go to FB03. Now Click on Document list. Enter the company code and Fiscal year. Also enter the posting date and document type to filter your criteria. Now execute. Now click on change layout. insert the field for reversed with.
Now it will show the reversal document if it exists.
Regards,
Jigar

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

The only reason I've stayed with Windows at all is because of all the how-to books available to those of us with learning diabilities.I would gladly pay $$ for

I have great difficulty with remembering what I've just read due to the fact that I have adhd and other learning disabilities and I use printed material to help me using programs,software etc.I can swap out drives and motherboards when the power supply goes south but thats it.I would love to use mozilla exclusively but I have yet to find a traditional printed user manual any where at any price.I'm pretty sure I'm not alone...thanks

Ubuntu has a book but still coudn't make any sense of it so I gave it to the friend who encouraged me to try the program.He certainly didn't the book but his idea of fairly straightforward was so much different than mine.
Thank you so much for such a quick response,I've been clicking away for quite a while and after I unjunk my computer I will do the same with Thunderbird.A book would be nice though.....thanks again

Reason for Flash issues with 10.2 update

I think I am beginning to understand the Flash issue. Because I have several Mac's and have only had one develop a issue with the new Flash 10.2 update. My feeling is that the one Mac a White Macbook with Intel graphics is the only one having the issue. While my other Mac's a Macbook Air, and two Mac Mini's with the Nvidia 9400M graphics and the Air's Nvidia 320M are not. Leads me to believe that somehow the hardware acceleration in the Flash that puts more use of the graphics chip rather then the CPU may be the cause. It may not work as well with the Intel graphics. The Flash official requirements is 128Mb of VRAM for it to work. I would say the older Intel chips may be causing a problem. Now why it works in 32 Bit mode with Safari is a bit of a mystery. A quick fix seems to be to enable Safari to run in 32 Bit or to use Google's Chrome browser which has built in Flash.

mmm.. please see the thread "Flash 10.2 choppy in fullscreen." I have plenty of VRAM here 288MB to be precise. 32bit or more RAM is not the solution as neither it is to turn the automatic switch in energy preferences. Clearly everything works well with version 10.1, problems just happen when you upgrade to version 10.2 and 10.3(beta).

Adobe Photoshop extremely choppy with latest Audigy2 ZS driv

I recently installed the latest SB Audigy 2 ZS drivers for Windows XP. If i work with Adobe Photoshop CS and listen at the same time to MP3 via Winamp 2.95, drawing with the mouse in Photoshop is extremely choppy. If i move the mouse fast in circles, nothing is drawn unless i move slowly. Curves appear jaggy instead of smooth like it was before. If i stop the music everything's fine. But as soon as music is played tracking the mouse in Photoshop is choppy. This never happened before.
It took me some time to figure out why this happens.
I used this Winamp installation for years without problems. Also there was never a problem with Photoshop. Mouse and its driver also didn't change for years. Then i remembered that i installed the latest Soundblaster drivers just recently.
I deinstalled the driver and now use the same as before, dated 2004-0-8. Works nice without choppiness.
For me the newer drivers are useless. They don't seem to be well tested.

Brendan Stewart wrote:
i mean creating a layer mask and painting it back in with the paintbrush.
Yes that is normal. I have no problem with CS6, No lag or hesitation.
A tip for you if your creating the mask using a copy of a color channel. Set the brush blending mode to "Overlay" This will protect the mask Black and White areas. You will only be able yo paint in gray areas of the mask. When areas turn 0,0,0 Black or 255,255,255 White they become protected too. Use a Wacom tablet soft brush low opacity and many strokes

Order Nos with Post Scripts to indicate Approvals

The client wants that when he maks an approval, every purchase order, goods receipt, A/P invoice, A/P correction invoice reversal, sales quotation, sales order, A/R invoice, A/R reserve invoice and etc. get a number with / (for example: 111222333/1 and after 111222333/2 after 111222333/3 where the /n depend on how many persons must do the approval. How we can do that?

Ankit,
The forum that you have posted your question in is for questions related to the SAP Business One SDK. I am not sure if you are asking a question with respect to how to do this via the Business One application or through code. I do not see a method in the Business One application itself so you would need to research if this can be done with code. If code, then you can search this forum to see if others have tried this or another member may have some advice on how to do this.
If you are looking to do this via the application (not code) you should post your question in the SAP Business One Discussion Forum.
Eddy

Reason 2.5 nosie with SB Audigy2 ZS Platinum

Similar Messages

Maybe you are looking for