Reason 2.5 won't rewire with logic

Hello,
I open Logic, then open reason, but it won't start in Rewire mode--it only starts in "Audio Card" mode for some reason. I know this by the little indicator lights at the top of Reason. Has anyone else run into this issue?
I'm running Logic Pro 8.
Thanks!

jcrowell1234 wrote:
****...it still runs, though. Does this mean there is no way I get my current version of Reason to play through logic?
Not through rewire.
You might be able to use one of the sound routing application like "Soundflower" but I wouldn't want to say for sure. Problem is, Resaon is running under the Rosetta PPC emulation, performance is going to be about 1/10 of what it would be on a PPC machine. You may get it to work but it must be hitting the CPU pretty hard.
pancenter-
Thanks for the help, by the way. I was getting pretty frustrated. Now I'll just be frustrated and sad.

Similar Messages

Apple Remote won't work with Logic

I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
I've searched the Internet and am finding little on this topic.

Rewire won't work with Logic + Reason

I started a project with Logic + Reason and everything was working fine. But then one day it stopped working.
1. It'll work without Rewire (just a mixer in Reason)
2. The Aux channels on the Logic mixer don't indicate any levels.
3. The level indicators on the Hardware Device in Reason aren't indicating any signal
4. Rewire DID work one day after it wasn't working but now it isn't again.
5. I've tried restarting my computer and even changing my audio device to "Built-In Audio"
Why won't rewire work?
Message was edited by: RyConn M.D.

I have been having this same problem. One time Rewire will work and the next try it won't. I found that Logic will not see the Rewire channels when you go to add an Aux channel in the mixer screen. If you see the Rewire channels in this section, then Rewire will work. If not then Rewire will not see Reason and it will not function. It just started happening for me this last week or so. I wonder if Apple made some sort of change that is causing this problem. I never had a problem with Reason before this last week or so. It was always a really solid program interface before this. I am getting frustrated. I have reloaded Reason and Logic with no change. AI deleted the rewire files in the library. It may then function once and then it goes bad again. Can anyone Help Us?

Waves 9 won't work with logic pro x

I downloaded waves v9 but it still won't show up on my Logic Pro. It is a 64 bit polgin

If... you have updated to the latest version of Waves 9
and...
You have correctly installed/activated/validated them using the Waves License Center and the Waves AU Reg Utility (That you must run after installing the updates..) then they work pretty good with Logic. I know.. I use them on a daily basis... No magic... no special tricks...
The Waves plugins themselves still have a few bugs in them which is why Waves keeps updating them..(There have been several updates to Waves 9 since release across all platforms and not just OS X...) but it isn't anything to do with Logic... Its programming bugs in the Waves plugins themselves that cause the remaining issues..
So.. if you cannot get them to work properly, contact Waves support for assistance...
https://www.waves.com/login?ReturnUrl=%2fcontact-support
There is little if anything, anyone here.. or at Apple.. that can do to help you.. and to think its a Logic Pro problem... is just misleading yourself and wasting your own time...

Reason Rewire with Logic Pro 7.2!

Hey guys,
I had no problem rewiring Reason in 7.1 on my PowerPC Mac Mini, but on my Intel Macs, with 7.2, Rewire is not an option in the Channel List on an Audio Object or Aux. I notice there is still rewire layers in the Env, but I'm confused about the one slave, two slave thing, (A and B). Am I doing something wrong? Or do I need to update Reason from 2.5 to 3.0? Help! Please!

For Rewire to correctly work on Intel Macs, Both apps need to be running under Rosetta. Since Logic is a Universial Binary, there isn't a way to run Reason as a rewire slave from Logic.
You'll have to wait till a Universial Binary of Reason is released.
more info http://www.propellerheads.se/
"Early testing using the Apple Developer Transition Kit shows that:
-Reason will continue to run in Rosetta, but the performance loss is similar to running Reason on a G3.
-ReCycle runs fine in Rosetta, with no measurable performance issues.
-ReWire works, as long as all applications in the session are PowerPC-based."
Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 Motu 896 Mac OS X (10.4.5) Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Recording Interfaces that work with Logic Studio

Hey there! I'm pretty much a noob to Logic Studio. I've been using garageband and reason 4 before that. I've had an M-Audio Fast Track that worked alright with Garageband, but it won't work with Logic, at least for me. I did some research and found out that this happened for most people.
So I was wondering, what's a good recording interface that would work well with Logic (which should then work with garageband) that works very well and worth the money that's paid for it?
Specs:
Macbook Pro
version 10.5.2
2.4 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Thanks alot.

Welcome to the forum jareddddddd, i do believe the problem your having with the M-Audio is the the drivers for intel, at the moment are Beta drivers.
Beta meaning they are going thought testing and isn't official drivers, therefore it might work or it might not.
As flood123 said the Duet will be much better, compare to low end M-Audio interface, which will sound far better and integrates well with Logic.
Also Fire-Face by R.M.E is a good interface, almost forget to mention Lavry interface which sounds way better than the two already mention that's only my opinion though.
Personally i have found it to be my preferred choice compare to Apogee low end interface that hasn't got the C77 clock work that Apogee flag-ship interface has, such as the Rossette 800 and AD/DA 16 carries.
Try and find a local music store and try out a few interface that is hook-up to L.P. by Fire wire and maybe you'll have a better choice in choosing.
Fr.BlayZay.

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Any reason why iTunes would not sync with my iOS device using USB cable?

Hi there,
what could be the reason if iTunes won't sync with my iOS 5 devices via USB? The devices are recognized in iTunes (I can see the devices there and all the content stored on these devices), but the sync does not work...
BTW: I tried several different USB cables already...
I am using Mac OS X Lion on a MacBook Pro Late 2011.
Thanks
Ralf

I can't recommend any learning resources, especially since what you are going to be doing likely falls under the category of basic untutorialed coding.
When I decided to take the plunge I had a project in hand that I had just created in AS2, and what I did was restart the project using AS3, tackling each coding element as it came up. One nice thing about AS3 is that it is much better with pointing out coding errors--while cryptic at times, you get better at interpretting them with time--and when you don't get any, chances are you are on the right track. So you try something and if it flies, great, and if an error message pops up, you pursue solving the error.
In most cases, the Flash help documents are a sufficient reference, but in other cases I would rely on Google. Just as a for instance, you mention using key listeners... That would be something I would have serach Google using "AS3 key listener", and I'm willing to bet you'd find something to get you over the hump. Sometimes it helps to add "tutorial" to the end of a search string... it can help weed out all the others that have psotings on forums that are offering problems rather than solutions.

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Rewired Reason with Logic

Hey guys,
I am new here. I successfully rewired reason so I can hear it in Logic, but the only problem is that I hear both programs playing the sound. There might be a quick and easy solution that I do not know of since I am quite new to logic.
Anyways hope you guys can help me out!

I had the same problem.... contacted Reason Support and they said the following :
"You have to go to Reason Menu > Preferences > keyboards and control surfaces and un-tick the 'Use with Reason' box next to your keyboard."
Trouble is that when you use Reason in Stand alone then you need to check the boxes back again.
Hope this works
Fingers...

Logic rewired with Reason midi controller issue.

I use Logic 7.2.3 rewired with Reason and for some "reason" I can't get Reason to recognize my controller which is connected via MIDI to the Digi 003. Any ideas?

Interesting question.. Usually, variation in velocity is a desirable thing, to be able to play an instrument expressively. However, if you want to make your notes all equal velocity, an easy way to do this is with the inspector. Make sure that no regions are selected in the arrange window (so that the inspector says 'midi through'). Then adjust the 'dynamics' setting to 'off' (or whatever the actual terminology is), from that point on, anything you play on any instrument will have the velocity ignored. You can also set this kind of thing up for individual instruments, using the instrument parameter box just below the inspector.

Reason 8.1 will not ReWire slave to Logic Pro X? Anyone else experiencing this?

Hi folks,
I'm running the latest version of Logic Pro X (10.1.1) and the latest version of Reason (8.1) on a brand-new Retina iMac running Yosemite (10.10.1).
Prior to this, I was running Reason 6.5.3 and I also have a copy of Ableton Live 9.1.7. (On the same brand-new iMac, to be clear.)
Here's the problem:
Old Reason (6.5.3) would enter ReWire Slave Mode with Logic Pro X with zero issue. Same goes for Live 9.1.7. But once I upgraded to Reason 8.1, it won't do it anymore. I'm doing the obvious things:
-I open Logic first, before Reason
-I've made sure that CoreAudio and ReWire are turned on in Logic's Audio Preferences pane (I've also tried toggling both on/off)
-I've made sure that both programs are running 64-bit (although I did try running Reason in 32 as an experiment)
-I've downloaded and reinstalled the latest version of ReWire (1.7, I believe -- might be remembering that version number incorrectly)
-I've tried all of this with and without my Reason Ignition Key in a USB slot
No matter what I try, though, Reason never slaves itself.
It WILL slave itself to Ableton Live, though. So, to be clear:
-Live will slave to Logic
-Reason will slave to Live
-Reason will NOT slave to Logic
Am I overlooking something really silly here? I'd love to find an answer to this question so I can get back to my usual workflow ASAP!
Thanks very much for your help. I really appreciate it.
Cheers,
Adam

Hey Adam,
I am also having rewire problems with Reason 8.1 into Logic 10.1.1 and as you experience it's not with Reason into Ableton or Ableton into Logic (although Ableton has crashed a few times this way). Everything worked fine for me up until I downloaded the latest Logic download last week.
Is your Reason loading up as normal in stand alone mode? For me, Rewire either works perfectly (10% of the time) or I get the error message 'Engine not responding. Please check your Rewire host'. I have tried reinstalling Logic and have checked lots of forums but cannot find any concrete answers.
It's kinda driving me crazy as I'm in the middle of a project so would like to get it sorted asap! Let me know if you find anything! M

Reason beat tempo not syncing with Logic Tempo???

Hi,
Made a beat in Reason 5
Exported loop at 137 bpm and saved to external hard drive.
Imported loop into Logic with Logic tempo set at 137 bpm.
Set the metronome on for recording. Pressed record and and beat & metronome are out of sync.
I used beat detection to try find the tempo (said it was 137.1672 or something) yet still the metronome & beat go out of sync...
Any ideas?
I'm going to try saving the beat to the internal harddrive and see if that is the problem.
The external hard drive is USB not firewire.
Hope you can help me...

to bring your reason audio into logic in perfect sync, open reason as a rewire slave to logic and set up a logic aux track input to reason L&R. Set your locators in logic to the loop length and bounce (with "add to audio bin" enabled so its easy to drag it into your song). This locks the 2 clocks together. Which drive your audio is on is irrelevant.

Reason - multiple stereo rewire to logic song templates anyone?

Hi,
I'm a recent convert to (intel) iMac/Logic Pro/Reason from PC/Cubase/Reason.
After a whole weekend of head scratching, manual reading & forum browsing I've finally managed to set up a working environment with reason 3.05 rewired to logic - I have setup the main stereo L&R & Multiple mono channels from reason as well as a number of internal rewire objects to act as instruments.
I've read that its possible to go further & actually create rewired 'stereo' channels, which only need 1 effect added per pair. As far as i can understand this is done by creating two mono channels, panned hard L&R then linking to aux object/buss object then only making the aux (or buss?)object available in the arrange/track mixer page?
Only thing is.. i can't get these stereo channels to work - As i mentioned, I'm new to MAC & logic (although have studied manual in depth) so it may be a rudimentary error in my environment set up or my understanding of aux/buss object behaviour, but i need to get working with reason asap so wondered if anyone has done this already & could either post a simple walkthrough or maybe email a song template so i could copy & paste the stereo rewire layer?
I've already found a page online for some one (http://www.stormchild.net/music/reasonwithlogic.html ) who had done this but with Logic 6 but doesn't seem to work with my intelmac & logic 7.2.1 (& in fact when i loaded his autoload it 'removed' my focusrite saffire from available interfaces & i had to unplug it & restart the mac to get it back)
Any help would be much appreciated
Adam
Intel iMac 20' Mac OS X (10.4.7)

Hi,
Apostol, I do a ton of midi programming & although I'm a massive reason fan the sequencer doesnt do it for me - I've used reason for sounds & beats very happily rewired to cubases sequencer (on PC) for years now.
Got Guitar, I'm impressed (if a little scared!) at your local knowledge of my little hometown, & thanks for the book recomendation & offer of your templates. The rewire templates in logic (on 7.2.1 at least) don't deliver the goods for reason, at least with my intel iMac.
I've since sucessfully set up an environment with a number of mono chammels (& L&R rewire on masterL&R) which works well in that it shows the reason device name in the channel menu on arrange page but it's just creating these 'stereo' tracks that i'm stuck on.
I think I have made some progress late last night as follows.... Obviously reason (with the exception of hardwire interface 1&2 (L&R)outputs isn't designed to output in stereo but so far I've created a number of 'stereo tracks' (2 x audio objects panned L&R), assigned their channels to reason hardware interface outputs 33-34, 35-36 etc etc, & I've then connected each of these 'panned pairs' in the environment to a stereo aux object by assigning the in/out on their audio objects to a buss number then assigning this buss to the relevant aux (so i only have to use one effect/fader per pair).
This setup works great in that i just need, in reason, to assign an instruments output directly to the suitable hardware interface outputs (ie 33-34) & it plays through this new stereo pair.
All i need to do now is to 'clean up' this set up so i can only see these single stereo aux's in my & track mixer (& arrange page if possible?) so there aren't 3 x tracks showing as playing per instrument? - I feel like i'm nearly there, anyone able to help with this last chapter in the saga????

Reason 2.5 won't rewire with logic

Similar Messages

Maybe you are looking for